Docstoc

0408_1_EN1_CDN_1_

Document Sample
0408_1_EN1_CDN_1_ Powered By Docstoc
					Zep Manufacturing Co. of Canada 11627 178th Street Edmonton, Alberta T5S 1N6 1-800-I-BUY-ZEP

Material Safety Data Sheet
and Safe Handling and Disposal Information
Section 1. Chemical Product and Company Identification Product name FAST GASKET CLEAR Not available. Product Use Product Code 0408 Date of issue 09/12/06 Supersedes09/17/03

Emergency For MSDS Information: Telephone Technical Services Group Zep Manufacturing of Canada Numbers Telephone: (780) 453-8100 (Business Hours 8:00-5:00)
For a Medical or Transportation Emergency: CANUTEC (24 Hours) (613) 996-6666 - Call Collect

Printing date: 12/09/06

Prepared by Technical Services Group Zep Manufacturing Co. of Canada 11627 178th Street Edmonton, Alberta T5S 1N6 Date of Preparation : 09/12/06
CAS #
7631-86-9 17689-77-9 4253-34-3

Section 2. Composition, Information on Ingredients
Name of Hazardous Ingredients
SILICA, AMORPHOUS; Diatomaceous Earth; Silicon Dioxide ETHYLTRIACETOXYSILANE, acetoxy silane METHYLTRIACETOXYSILANE, acetoxy silan

% by Weight
5 - 10 1-5 1-5 Not

Toxicity Data
Not available. available. Not Not available. available. Not Not available. available. Not available. Not available. Not available. Not available. Not available. Not available.

Section 3. Hazards Identification Acute Effects Routes of EntryDermal contact. Eye contact. Inhalation. Prolonged or repeated contact may dry skin and cause irritation. Skin inflammation is characterized by itching, Skin scaling, or reddening. Hazardous in case of eye contact (irritant). Inflammation of the eye is characterized by redness, watering, and Eyes itching. Inhalation Over-exposure by inhalation may cause respiratory irritation. Ingestion Unlikely in this form.

Chronic Effects

Prolonged skin contact may cause dermatitis with drying and cracking of skin.
Additional information : See Toxicological Information (section 11)

Section 4. First Aid Measures Immediately flush eyes with running water for at least 15 minutes, keeping eyelids open. Get medical Eye Contact attention. Rinse with plenty of running water. Get medical attention if irritation develops. Skin Contact If inhaled, remove to fresh air. If irritation persists, get medical attention. Inhalation Unlikely in this form. Ingestion Section 5. Fire Fighting Measures Flammable LimitsNot applicable. Not applicable. Flash Point Non-flammable. (CSMA Flammability Auto-ignition Temperature Use DRY chemicals, CO, water spray or foam. Cool closed containers exposed to fire with Fire-Fighting Procedures 2 water. Container explosion may occur under fire conditions or when heated. Fire Hazard Products of Combustion Carbon Dioxide and fumes of Acetic acid. and silicon. Explosion hazard Section 6. Accidental Release Measures Spill Clean up Large spills are unlikely due to packaging.

Page: 1/3

Product Code 0408

Material Safety Data Sheet

Product Name FAST GASKET CLEAR

Section 7. Handling and Storage Avoid contact with skin and eyes. Handling Keep container in a cool, well-ventilated area. Keep away from heat and direct sunlight. Do not store above Storage 49°C (120.2°F). Do not puncture or incinerate. Keep out of the reach of children. Section 8. Exposure Controls, Personal Protection Engineering Controls Provide exhaust ventilation or other engineering controls to keep the airborne concentrations of vapors below their respective occupational exposure limits. Ensure that eyewash stations and safety showers are proximal to the work-station location. Personal Protection Protective Clothing (Pictograms) Safety glasses. Eyes Hands and Body For prolonged or repeated handling, use gloves (nitrile, neoprene, natural rubber (latex)) Respiratory Wear appropriate respirator when ventilation is inadequate.

Exposure Limits
Name of Hazardous Ingredients
Amorphous Silica Methyltriacetoxysilane

CAS # 7631-86-9
4253-34-3

Ethyltriacetoxysilane

17689-77-9

Exposure Limits ACGIH TLV (United States). : 0.1 mg/m3 ACGIH TLV (United States). TWA: 10 ppm 8 hour(s). Form: (for acetic acid only) OSHA PEL 1989 (United States). TWA: 10 ppm 8 hour(s). Form: (for acetic acid only) ACGIH TLV (United States). TWA: 10 ppm 8 hour(s). Form: (for acetic acid only) OSHA PEL 1989 (United States). TWA: 10 ppm 8 hour(s). Form: (for acetic acid only)

Consult local authorities for acceptable exposure limits.

Section 9. Physical and Chemical Properties Physical State Liquid. ( Paste. Aerosol.) Not available. pH 149°C (300.2°F) Boiling Point Freezing Point Not available. Specific Gravity 1.04 (Water = 1) Insoluble in cold water, hot water. Solubility

Color Clear. Odor Acetic acid. Vapor Pressure <0.7 kPa (<5 mmHg) (at 20°C) Vapor Density Not available. Evaporation Rate<1 compared to Butyl acetate. VOC (Consumer) 0

Section 10. Stability and Reactivity The product is stable. Stability and Reactivity Reactive with oxidizing agents. Incompatibility Will not occur. Reactivity Hazardous Decomposition Products Carbon Dioxide and fumes of Acetic acid. and silicon. Section 11. Toxicological Information Ingredients: Not listed as carcinogen by OSHA, NTP or IARC. Carcinogenic Effects Reproductive Effects Mutagenic Effects Teratogenic Effects Section 12. Ecological Information Not available. Ecotoxicity Biodegradable/OECD Not available. Section 13. Disposal Considerations Waste Information Waste must be disposed according to applicable regulations. Consult your local or regional authorities. Section 14. Transport Information
Regulatory Information TDG Classification UN number
1950

Waste Stream Code: - (Not applicable.) Classification: - (Non-hazardous waste)

Proper shipping name
Aerosols, nonflammable

Class

Packing Group
-

Label

Additional information

2.2

2

Expl osi ve Li mi t and Limited Quantity Index 1

Limited Quantity: Small quantities of controlled goods are not regulated as Dangerous Goods according to the TDG regulations.

Page: 2/3

Product Code 0408

Material Safety Data Sheet

Product Name FAST GASKET CLEAR

Section 15. Regulatory Information Class A: Compressed gas. WHMIS (Canada) Class D-2B: Material causing other toxic effects (TOXIC). Not available. Other Regulations
This product has been classifed according to the hazard criteria of the CPR and the MSDS contains all of the available information required by the CPR.

Section 16. Other Information
To the best of our knowledge, the information contained herein is accurate. However, neither the above named supplier nor any of its subsidiaries assumes any liability whatsoever for the accuracy or completeness of the information contained herein. Final determination of suitability of any material is the sole responsibility of the user. All materials may present unknown hazards and should be used with cautio Although certain hazards are described herein, we cannot guarantee that these are the only hazards that exis


				
DOCUMENT INFO
Shared By:
Categories:
Tags:
Stats:
views:2
posted:9/17/2009
language:English
pages:3