Docstoc

1785075pdf

Document Sample
1785075pdf Powered By Docstoc
					- - - - - - - - - - - - - - - - MATERIAL SAFETY DATA SHEET - - - - - - - - - - - - - - IDEXX Laboratories
MANUFACTURER: IDEXX LABORATORIES INC. PHONE: (207) 856-0300 ECN NO.: 5478 REVISION NO.: A REVISION DATE: 03/17/95 ----------------------------------------------------------SECTION 1 - MATERIAL IDENTIFICATION ----------------------------------------------------------DESCRIPTION: The CITE Probe Feline Leukemia Virus test kit is an enzyme-linked immunosorbant assay (ELISA) for the detection of Feline Leukemia Virus (FeLV) in feline serum, plasma or whole blood. ----------------------------------------------------------SECTION 2 - INGREDIENTS AND HAZARDS ----------------------------------------------------------N/A ----------------------------------------------------------SECTION 3 - PHYSICAL DATA ----------------------------------------------------------Liquid reagents in plastic dropper bottles. ----------------------------------------------------------SECTION 4 - FIRE AND EXPLOSION DATA ----------------------------------------------------------EXTINGUISHING MEDIA: Use extinguishing media appropriate for the surrounding fire. SPECIAL FIRE-FIGHTING PROCEDURES: Wear self-contained breathing apparatus and protective clothing to prevent contact with eyes and skin. ----------------------------------------------------------SECTION 5 - REACTIVITY DATA ----------------------------------------------------------Materials in this kit are stable. Hazardous polymerization will not occur. ----------------------------------------------------------SECTION 6 - HEALTH HAZARD INFORMATION ----------------------------------------------------------SIGNS AND SYMPTOMS OF OVEREXPOSURE TO REAGENTS: EYE CONTACT: Reagents may cause eye irritation. SKIN CONTACT: Prolonged and/or repeated contact with reagents may cause skin irritation. INHALATION: Reagents may cause irritation of the mucous membranes of the nose, throat, respiratory tract, and/or headache and nausea in poorly ventilated areas. FIRST AID FOR REAGENT EXPOSURE: EYE CONTACT: Flush eyes with copious amounts of water for at least 15 minutes. SKIN CONTACT: Flush skin with copious amounts of water for at least 15 minutes. INHALATION: Remove individual to fresh air. Seek medical help if necessary. ----------------------------------------------------------SECTION 7 - SPILL, LEAK, AND DISPOSAL PROCEDURES ----------------------------------------------------------SPILL/LEAK PROCEDURES: Contain spill, then clean with copious amounts of soap and water. Avoid contact with skin or clothing. WASTE MANAGEMENT/DISPOSAL: Observe all Federal, State, and Local laws concerning health and pollution. WARNING: Reagents in this kit contain very low concentrations of the antibiotic Gentamicin. WARNING: Reagents in this kit contain very low concentrations of sodium azide. These materials should be diluted with running water before disposal to avoid deposits in plumbing where explosive conditions may develop. ----------------------------------------------------------SECTION 8 - SPECIAL PROTECTION INFORMATION ----------------------------------------------------------Good housekeeping procedures and laboratory practice is the best preventative. Use in well-ventilated areas. Handle all biologicals as if capable of transmitting disease.

FELV PROBE
----------------------------------------------------------NOTICE: IDEXX believes the information contained herein is valid and accurate. IDEXX makes no warranty or representation as to its validity, accuracy or currency. IDEXX shall not be liable or otherwise responsible in any way for use of this information. Disposal of hazardous material may be subject to Federal, State, or local laws or regulations. ----------------------------------------------------------DISCLAIMER OF EXPRESSED AND IMPLIED WARRANTIES: Although reasonable care has been taken in the preparation of this document, we extend no warranties and make no representation as to the accuracy or completeness of the information contained therein, and assume no responsibility regarding the suitability of this information for the user's intended purposes or for the consequences of its use. Each individual should make a determination as to the suitability of the information for their particular purpose(s). A request has been made to the manufacturer to approve the contents of this material safety data sheet. Upon receipt a new MSDS will be made available. ----------------------------------------------------------COMPAS Code: 17850751

Page 1 of 1


				
DOCUMENT INFO
Shared By:
Categories:
Tags:
Stats:
views:8
posted:9/17/2009
language:English
pages:1