Embed
Email

General Purpose Amplifier Interface

Document Sample
General Purpose Amplifier Interface
Shared by: gaeltec
Stats
views:
2
posted:
2/21/2012
language:
pages:
2
General Purpose Amplifier Interface









General purpose amplifier for interfacing Gaeltec Medical Pressure Transducers to host

analogue devices.



Designed specifically as a low cost device meeting the requirements of medical practitioners

wishing to link Gaeltec Pressure Transducers to other Medical Devices which require an

analogue input signal.





Product Overview

The Gaeltec S7d Mk.II is suitable for use as an interface between Gaeltec Pressure

Transducers and suitable personal computers for medical or non-medical use where the user

wishes to use third party application software.



This requires the use of an Analogue to Digital converter (not supplied).

© 2012 Gaeltec Devices Ltd - Miniature Pressure Sensors and Pressure Monitoring Equipment

Telephone: +44 (0)1470 521 385 Fax: +44 (0)1470 521 369 Email us: web@gaeltec.com

Gaeltec Devices Ltd, Glendale Road, Dunvegan, Isle of Skye, Scotland IV55 8GU

The S7d Mk.II is available in configurations of 4 or 8 channels according to customer

requirement.



● A single, multi-pin Input connector provides for Pressure Transducer connection.

● A single, multi-pin, Output connector provides for connection to the Host Device.

● A backlit LCD bar graph display is provided for use during setup, configuration &

recording.



The S7d Mk.II is powered by a medically approved Low Voltage mains adaptor (supplied).





Supplied components



● The S7d Mk.II amplifier unit.

● A 9 volt DC medical mains Power Supply specific to the country of use.

● An Output Cable1 with free end for connection to the Host Analogue Recording Device2.





Avaliable accessories



● An Input Cable1 for connection to the required Gaeltec Pressure Transducer(s).

● Appropriate pressure transducer(s).

● Calibration tube(s) for the specified pressure transducer(s).

● A manometer for use during transducer calibration.

● Additional accessories (Not supplied by Gaeltec)

● A host analogue device.

● Suitable software for displaying, recording and analysing the pressure outputs.

● A to D converter board for computer.

● 1 2m length supplied unless otherwise specified.

● 2 Additional connector for host device may be supplied at additional cost, if required.





Where to Buy



The General Purpose Amplifier Interface can be ordered direct through Gaeltec Devices Ltd or

one of many approved distributors Worldwide.









© 2012 Gaeltec Devices Ltd - Miniature Pressure Sensors and Pressure Monitoring Equipment

Telephone: +44 (0)1470 521 385 Fax: +44 (0)1470 521 369 Email us: web@gaeltec.com

Gaeltec Devices Ltd, Glendale Road, Dunvegan, Isle of Skye, Scotland IV55 8GU


Related docs
Other docs by gaeltec
Transducer Interface
Views: 3  |  Downloads: 0
Differential Gas Pressure Transducer
Views: 2  |  Downloads: 0
Catheter Tip Pressure Transducers for Urology
Views: 1  |  Downloads: 0
General Purpose Amplifier Interface
Views: 2  |  Downloads: 0
Luer Fitting Pressure Transducer
Views: 1  |  Downloads: 0
CA-2 Adaptors
Views: 3  |  Downloads: 0
Perspex Differential Pressure Transducer
Views: 1  |  Downloads: 0