Perspex Differential Pressure Transducer
Designed for situations where both sides of the sensing diaphragm are to be exposed to
a liquid.
A transparent perspex housing allows a view of all the pathways in the transducer.
Product Overview
This transducer has been produced specifically for situations where both sides of the sensing
diaphragm are to be exposed to a liquid. In order to obtain good measurements it is necessary
to clear the system of air bubbles. The transparent perspex housing allows a view of all the
pathways in the transducer.
© 2012 Gaeltec Devices Ltd - Miniature Pressure Sensors and Pressure Monitoring Equipment
Telephone: +44 (0)1470 521 385 Fax: +44 (0)1470 521 369 Email us: web@gaeltec.com
Gaeltec Devices Ltd, Glendale Road, Dunvegan, Isle of Skye, Scotland IV55 8GU
The sensitivity can be higher than the normal Gaeltec Devices transducers as the relatively
large metal diaphragm is an active full bridge network − as opposed to the usual half bridge
device with the reference half of the bridge being passive resistors in the connector.
Note: Liquids used in the transducer must be compatible with silicone rubber and perspex.
Technical Specifications
Where to Buy
Perspex Differential Pressure Transducers can be ordered direct through Gaeltec Devices Ltd
or one of many approved distributors Worldwide.
© 2012 Gaeltec Devices Ltd - Miniature Pressure Sensors and Pressure Monitoring Equipment
Telephone: +44 (0)1470 521 385 Fax: +44 (0)1470 521 369 Email us: web@gaeltec.com
Gaeltec Devices Ltd, Glendale Road, Dunvegan, Isle of Skye, Scotland IV55 8GU