Docstoc

Dirt

Document Sample
Dirt Powered By Docstoc
					Dirt, grime and mildew can collect on your home's vinyl siding and if not cleaned, can cause costly
repairs, renovations or replacements. These contaminates are removable without using excessive water
pressure, which can cause damage, by using contractor grade cleaners. We apply a wet wax in our house
wash mix to keep your home cleaner longer. We can also remove irrigation rust stains using low
pressure. Gutter exteriors are included in our house washing service, and will be brushed clean using a
special cleaner and then rinsed with low pressure.

Gutter Cleaning

Gutter interiors should be cleaned out in the spring and again in fall, to keep them from getting clogged
and causing drainage problems.
Low Pressure Roof Washing

Black streaks on asphalt shingles is known as roof algae. It will only get worse if not taken care of. Algae
likes to thrive on the north side roofs where the proper amount of shade is present. It feeds on the
crushed limestone that is used in asphalt shingles. Rain spreads the algae down the roof causing
unsightly black streaks. Eventually, the algae will take over the entire roof. We can kill and remove the
algae, using contractor grade cleaners and low pressure, making your roof look new again.

Concrete Cleaning and Pressure Washing Services

Having your driveway cleaned, along with a house wash, is a great way to increase curb appeal. A lot of
people do not realize how dirty their driveways, sidewalks, and patios are and are amazed with the
difference, once cleaned. We can also remove irrigation rust stains from your concrete.

Brick and Block Power Washing

Brick also collects dirt, mold, and mildew and must be cleaned. There are many types of brick; some
brick can not withstand as much pressure as others can. We can adjust the pressure to meet these
needs.

Cleaning Decks Wood Restoration and Pressure Washing

Wood restoration is, probably, the most misunderstood process. Wood is soft and can be easily
damaged with too much water pressure. A lot of factors determine what deck cleaner we will use to
restore the wood. Once we choose the correct cleaners, we wash the wood with the right amount of
pressure. We then do a neutralizing process to prepare the wood to be sealed. The number one reason
a sealer fails is because the wood is not prepared properly. After the wood dries to the proper moisture
level, we then apply a contractor grade sealer.
We provide numerous home exterior cleaning and pressure washing services for decks, roofs,
driveways, wood restoration and more.

				
DOCUMENT INFO
Shared By:
Categories:
Tags:
Stats:
views:4
posted:2/15/2012
language:
pages:2