phr fuse selection
Document Sample


Fuses & Plug-in Horsepower Resistor®
Cross Reference Chart by Speed Control Model
Model Line Fuse Armature or Plug-in
Motor Fuse Horsepower
Resistor®
KBIC All Models Optional Optional Required
KBMM All Models Available Available Required
KBWD All Models External External Required
KBWS All Models Optional Optional Required
KBCC Non -R Models Included Available Required
KBCC-255 External Included Not Required*
KBCC-240D External Included Not Required
KBWT All Models External Available Not Required*
KBCC -R Models Included Available Required
KBPB All Models Included Available Required
KBMG-212D External External Not Required
KBRG-240D/-225D Included Included Not Required
KBRG-255 External External Not Required
KBWM All Models Included Available Required
KBMD All Models Included Available Required
KBPC-240D External Included Not Required
KBPC-225 External External Not Required
KBPW-240D External External Not Required
KBRC-240D External External Not Required
KBVF All Models External Not Required** Not Required
KBAC All Models External Not Required** Not Required
- Optional: Optional fuse mounting kit can be added.
- Available: Provisions for mounting the fuse are provided, but the fuse is not included with the control.
Consult the Fuse Selection Chart for proper fuse sizing.
- Included: Fuse is included with the control. The armature fuse may have to be changed if the control is to be used with
a smaller motor. Consult the Fuse Selection Chart for proper fuse sizing.
- External: There are no provisions for mounting the fuse on the control. However, we recommend that the customer
provide an external means of fusing the control. Consult the Fuse Selection Chart for proper fuse sizing.
- Required: The control must have a Plug-in Horsepower Resistor® installed, correctly sized by motor horsepower.
Consult the Plug-in Horsepower Resistor® Selection Chart for proper sizing.
- Not Required: This control uses Quick Jumps instead for current selection. *These models have fixed current selection,
and use the CL trimpot for current adjustment. **These models have I 2t Electronic Overload Protection, so do not need
fusing in the motor leads.
Get documents about "