SL2 Product Description
The World's Smallest Dual Output LNBF
The GEOSATpro SL2 Bullet LNBF is the smallest two output Ku-band LNBF available in the world!
GEOSATpro technicians incorporated the latest in microelectronic technology to design and produce this
innovative high performance twin LNBF. Independent isolated outputs prevent interference between
multiple receivers. The small bullet size housing will not compromise signal reception. You will not find a
higher performance FSS LNBF anywhere.
* Replaces a single output LNBF for installation support of 2 or more receivers
* Watch different channels from the same satellite dish on 2 different receivers
* Compatible with DVBS, FTA, MPEG, DCII and Analog satellite receivers
* Stable frequency and low noise 0.4 NR for the very best reception in fringe signal areas
* Twin F-type coax outputs for direct connection with 1 or 2 satellite boxes
* Connect to a standard 3x4 multi-switch, 22KHz or DiSEqC type multi-switch for multiple receiver
connections (3 or more receivers)
* 40mm standard size FSS satellite dish LNBF mount
* Allows 3 - 4 degree reception of multiple satellite dishes
* Perfect for adding additional rooms for a Glorystar System
GEOSATpro SL2 Bullet LNBF in Hand GEOSATpro SL2 Bullet LNBF Mounted
Design and manufacturing agreements assure that the unique and high performance SL2 LNBFs are
exclusively available through authorized GEOSATpro distributors.
OEM manufacturing of a Standard type with LO 10750 or Universal type with LO 9750/10600 type is
available to provide your company with branded distribution opportunities. Please contact Satellite AV to
learn more about worldwide or regional distribution.
RF Input
I/P Frequency Range 11.7 ~ 12.75GHz
IF Input
L.O. Frequency 10.75GHz
O/P Frequency 950 ~ 2000MHz
L.O. Stability +/-3MHz (-40°C ~ +60°C)
L.O. Phase Noise <-50 dBc @ 1KHz offset
<-80 dBc @ 10KHz offset
<-95 dBc @ 100KHz offset
Output 75 ohms F-female type connector
Conversion Performance @ 25°C
Noise Figure 0.4dB (Typ)
Cross Polarization 25dB (Typ)
Image Rejection 40dB (Min)
Output VSWR 2.0:1
Conversion Gain 60dB (Typ)
Gain Flatness +/-0.5dB / 26 MHz, 8dB over each IF band
Output Spurious <-60dBm
Power Requirements
Current Consumption 170mA (200 mA Max)
Operating Voltage Vertical: 10.5 – 14.0 VDC
Horizontal: 16.0 – 20.0 VDC
Environmental
Working temp/humidity -30°C ~ +60°C 0 ~100%
Mount Diameter 40mm
Length 5 inches (12.5mm)
Weight 4.1 ounces (116.2 grams)
GEOSATpro has partnered with reknown switch manufacturer Ecoda to produce reliable multi-switches
for all other switches to be measured against.
This switch does not require a power supply and operates from the LNB power supplied by the satellite
receiver.