M6700111T0012Line items Descriptions SOW Video Wall

Document Sample
M6700111T0012Line items Descriptions SOW Video Wall Powered By Docstoc
					Line items Descriptions for the VIDEO WALL and STATEMENT OF WORK

Line items 0001: Qty (1) Part # VW- NEC
Video Wall for LOC Command Center - Consists of Six (2 x 3 Configuration) NEC 46" x 462 UN Ultra-Thin Bezel
Monitors Including Monitor Mounts Video Wall specifications of equipment shall include:

NEC MultiSync X462UN 46 LCD Ultra-Thin Bezel Monitor(s) 2. Super slim bezel with 7.3 mm between contents
and 6.7 mm bezel width 3. 46 inch Public Display with professional LCD panel and NEC Edge Comp 4. Ambient
light sensor for optimized brightness levels and minimized power consumption 5. Factory and user calibration for
perfect brightness and color uniformity 6. Option slot for Built-In PC, DVI Daisy chain and other boards 7. Panel
Technology: S-PVA TFT 8. Active Screen Area (W x H) mm: 1018.4 x 572.5 9. Screen Size inch/cm: 46 / 117 10.
Pixel Pitch mm: 0.746 x 0.746 11. Viewing Angle : 178 horizontal / 178 vertical (typ. at contrast ratio 10:1) 12.
Screen Aspect Ratio: 16:9 13. Contrast Ratio (typ.): 3000:1 14. Brightness (typ.) cd/m: 500, (700 max) 15. Response
Time (typ.) ms: 8 (grey-to-grey), 16 (6 white / black; 10 black / white), 8 (tr tf) 16. Colors Mio.: 16.77 17.
Horizontal Frequency kHz: 31.5 - 91.1 (analog and digital) 18. Vertical Frequency Hz: 50 - 85 19. Optimum
Resolution: 1360 x 768 at 60 Hz 20. Native Resolution: 1366 x 768 at 60 Hz 21. Supported Resolutions: 1920 x
1080; 1680 x 1050; 1600 x 1200; 1440 x 1050; 1366 x 768; 1280 x 1024; 1280 x 768; 1024 x 768; 832 x 624; 800 x
600; 720 x 400; 640 x 480 22. Video Input: Analog: 1 x S-Video; Analog: 5 x BNC, Component, Composite (via
BNC and Cinch); Analog: 1 x D-sub 15 pin; Digital: 1 x DVI-D (with HDCP); Digital: 1 x HDMI 1.3; Digital: 1 x
DisplayPort 23. Video Output: Analog: 5 x BNC, Composite (via BNC) 24. Audio Input: 2 x Cinch (RCA); 1 x
Head-jack 3.5 mm 25. Audio Output: 1 x Cinch (RCA) 26. Option Slot: Media Player; Built-in PC; DVI daisy chain
board; HD-SDI board; CAT 5 receiver 27. Plug Play: VESA DDC2Bi 28. Safety and Ergonomics: CE; TV GS; C-
tick; Energy Star 5.0; FCC Class B; UL/C-UL or CSA; CCC; PSB; VCCI; RoHS 29. Power Consumption on Mode
W: 200 (at 500 cd/m2) (typ.); 330W max. (with speakers and built-in PC 100% workload) 30. Power Management:
VESA DPMS 31. Power Supply: 100-120 V/220-240 V; 3.6 A/1.45 A; internal power supply 32. Ambient
Temperature (operating) C: +5 to +40 33. Ambient Humidity (operating) %: 20 to 80 34. VESA Mounting mm: 300
x 300 (FDMI); 4 holes 35. Dimensions (W x H x D) mm: With stand: 1025.7 x 623.6 x 351: Without stand: 1025.7
x 579.8 x 128.1 36. Bezel Width mm: 2.4 bottom/right; 4.3 top/left; (Content to content: 2.7 bottom/right; 4.6
top/left) 37. Weight kg: With stand: 30.8; Without stand: 29.0 38. Benefits: 10 bit LUT for calibration; 10 x 10 Tile
Matrix with up 100 IDs through RS232; copy display settings through RS232; EdgeComp; external ambient light +
IR sensor; LAN control through free NEC software; NaViSetand NaViSetAdministrator compatible; OmniColor:
sRGB and 6-Axis-Colour-Control; SNMP LAN; TileMatrix; TileMatrix per input; user controllable back up fans
with 2 speeds 39. Supported TV Standards (no tuner): SECAM; PAL; NTSC 40. Video Modes (no tuner): 480i;
480p; 576i; 576p; 2 x720p (50 and 60 Hz); 2 x 1080i (50 and 60 Hz); 2 x 1080p (50 and 60 Hz) 41. Audio
Functions: no optional speakers; Amplifier: 2x 15 Watt 42. Remote Control: RS-232C (9-pin D-sub) Input and
Output; D-sub 15 and DVI-D (DDC/CI); Remote Control IR 43. Color Versions: Black Front Bezel, Black Back
Cabinet 44. Shipping Content: Display; Power Cable; Signal Cable 3,5 mm jack; external sensor (IR + ambient
light); sensor; CD-ROM (User Guides/Manuals)

Line 0002: QTY (10) CI-RGB Extron RGB Computer Interface for Computer/Laptop Connectivity

RGB Video interface for Computer/laptop Connectivity RGB 109xi Device must have the following: Input: RGB
video on attached 4' (1.2 m) male 15-pin HD cable with 3.5 mm stereo audio plug and cable Output: RGB video on
female BNC connectors for RGsB, RGBS, or RGBHV; audio on captive screw connector 300 MHz (-3 dB) RGB
video bandwidth Compatible with computer-video resolutions up to QXGA Buffered local monitor output ADSP
- Advanced Digital Sync Processing An Extron exclusive technology that provides all-digital processing of sync
signals, eliminating compatibility issues encountered when using analog sync processing with digital display
devices. DDSP - Digital Display Sync Processing Allows the sync signal to pass through without altering sync
pulse or width. Disables other sync processing features such as horizontal and vertical centering. Three-position
level/peaking control Boosts and equalizes video signals to compensate for signal loss and high frequency
attenuation that occur in long cable runs. Horizontal shift control Shifts the displayed image left or right on the
display screen "horizontal centering". Active PC audio to balanced audio interfacing Converts computer-
generated, unbalanced audio to balanced line level stereo audio for output on a captive screw connector. Internal
universal power supply 1U, compact metal enclosure

Line item: 0003 Qty (1) CR-TP Crestron 12" V-Panel Touchpanel - Command Center
Ultra-slim, low profile, high definition touchpanels that are only 2-inches deep. must provide VESA mount
installation in addition to desktop and flush wall-mount. The Crestron V-Panel HD Touchpanels include a built-in
annotation which gives the user the ability to draw over a moving or paused video image The Crestron V-Panel HD
Touchpanels offer a native IP intercom that can be leveraged to talk panel-to-panel with someone in another room
The Crestron V-Panel HD Touchpanels offer a Crestron SIP phone that allows 2-way communication between
touchpanels, as well as with traditional and SIP/VoIP phones

Line Item 0004 Qty (2) CR-PRO2 Crestron Pro2 Dual Bus Processor
Crestron COM3 Serial Interfaces COM A - C (3) DB9 male, bidirectional RS-232/422/485 ports; Up to 115.2k
baud, hardware and software handshaking support Power Requirements Cresnet Power Usage 3 Watts (0.125
Amps @ 24 Volts DC) Environmental Temperature 41 to 113F (5 to 45C) Humidity 10% to 90% RH (non-
condensing) Construction Y-bus expansion card, occupies (1) Y-bus card slot in a 2-Series control system
Dimensions Height 0.98 in (2.49 cm) Width 5.00 in (12.70 cm) Depth 6.78 in (17.21 cm)

Line Item 0005 Qty (1) Crestron Pro2 Dual Bus Processor
Crestron Pro2 Dual Bus Processor

Line Item 0006: Qty (1) CR-75 Crestron 75 Watt Power Supply Part# CLX-PWS75
Crestron 75 Watt Power Supply must supply 75 watt power to crestron equipment.

Line Item 0007: Qty (1) CR-16SW Crestron Wideband RGB PART# CEN-RGBHV32X32V
16 X 16 Matrix Switch w/Audio for Command Center Crestron Wideband RGB 16 X 16 Matrix Switch w/Audio
16 x 16 high-bandwidth matrix switcher Low crosstalk | Incredibly flat response 450MHz video bandwidth (-3dB)
Professional balanced stereo audio Audio input level compensation Audio output volume and mute control Input
sync detection | Genlock sync input Adjustable video and audio blanking Selectable input sync impedance
Standalone operation | LCD-driven front control panel Cresnet or high-speed Ethernet communications Six-space
rack mount installation.

Line Item 0008: Qty(1) DVD-PLYR Blu-Ray/DVD Player for Distance Learning
Capable of playing both Blue-Ray and DVDs.

Line Item 0009 Qty (1) Audio Authority 1365 Video Conv for Blu-Ray/DVD Player
Part# AA-1366 Converts VGA and component video signals, Onboard scaling engine supports resolutions up to
1080p and 1920x1200 Includes overscan, aspect ratio, and other scaling adjustments OSD user interface (On Screen
Display) Contrast, brightness, hue, saturation, sharpness, RGB levels, and aspect ratio adjustments for output signals
Passthrough output preserves the original source video format Includes VGA-15 to 3-RCA cable

Line Item 0010 Qty (1) BiAmp Nexia VC Digital Signal Processor
Part# BA-NEXVC

Line Item 0011 Qty (4) Ceiling Speakers for Command Center
Part# JBL26CT

Line Item 0012 Qty (4) Crown MB3 Ceiling Mounted Microphones for Command Center
Part# CR-MB3
For teleconferencing, distance learning, boardrooms, courtrooms and security Small and inconspicuous Installs
permanently in a table top, wall or ceiling Half-supercardioid polar pattern reduces pickup of background noise,
room acoustics and feedback On-surface mounting eliminates phase interference from table sound reflections,
giving a natural sound MB 3 Crown Ceiling Mounted Microphones

Line Item: 0013 Qty (1) Audio Amplifier Part# Crown 280A
High-value amplifiers for commercial and industrial audio. They provide 4-ohm and constant-voltage outputs (70V
and 100V). The 660A, a six-channel amplifier, provides 4-ohm and constant-voltage outputs (70V and 100V) on
channels 1 through 4, and 4-ohm outpus on channels 5 and 6.
Line Item: 0014 Qty (2) Matrox P690 Plus LP Quad Video Card Part# M-P690
Reliable 4 output graphics/video card

Line Item: 0015 Qty (2) Cable LFH60 M to 4XXHD15 F Analog Part# CAB-L60-4XAF

Line Item: 0016 Qty (1) Component Racks
Fits all necessary equipment safetly and efficently.

Line Item: 0017 Qty (1) M-HDW Miscellaneous Hardware/Cables/Connectors

Line Item: 0018 Qty (1) Custom Glass Top Table w/Space for Two Computers/Monitors. Part # CSTM-2DTP
Custom Glass Top Table w/ space for two computers/monitors - must be sightly and safe.

Line Item: 0019 2 Custom Work Tables to Match Computer/Monitor Glass Top Tables. Custom work tables to
match computer/moitor Glass top tables Part # CSTM-TBL

Line Item: 0020 Custom Installation of Video and wall supporting system

Line Item: 0021 1 CSTM-PRGM Custom Programming of Video Wall and AV System
Programming of Video Wall and equipment.

****All items includes with a (1) one year Warrant and Maintenance Services****
                                        STATEMENT OF WORK FOR
                                      VIDEO WALL INSTALLATION IN
                                CISD OPERATIONS OFFICE, BLDG 3500, RM 201


1. SCOPE

The purpose of this contract is to provide installation of Video Wall, to include all equipment listed in the itemized
inventory at the end of this SOW. This contract includes all parts and labor.


2. PLACES OF PERFORMANCE

The place of performance is:
Marine Corps Logistics Base, Albany;
814 Radford Rd
Albany Ga 31704
BLDG 3500, RM 201


3. SECURITY CLEARANCE

No security clearance is required, vendor must check in with designated POC.

4. POINTS OF CONTACT

Technical POC:
Greg Wade, 229-639-7574
James Scarborough, 229-639-6600


Financial POC:

Deaundra Webb, 229-639-8105
Ali Tillman, 229-639-9615


THE CONTRACTOR SHALL SCHEDULE ALL VISITS THROUGH EITHER OF THE GOVERNMENT
TECHNICAL POINTS OF CONTACT.

5. OBSERVED HOLIDAYS

Federal holidays observed by the base are Labor Day, Columbus Day, Veteran’s Day, Thanksgiving Day, Christmas
Day, New Year’s Day, and other specifically designated days that are mutually agreed upon between the
CONTRACT ADMINISTRATOR and the CONTRACTOR during the period of performance for this contract.
When the holiday falls on a Sunday, the following Monday will be observed as the legal holiday. When the holiday
falls on a Saturday, the preceding Friday is observed as the legal holiday by the U. S. Government agencies.




6. DUTIES AND RESPONSIBILITIES

This requirement will include parts and labor, to include, but not limited to, all labor needed to install components in
accordance with manufacturer’s instructions. All necessary services required for a complete and functional Video
Wall system shall be provided. All components must meet TIA/EIA standards and be labeled accordingly. All
equipment racks, tables, mounts, and tables will be installed level and in accordance to manufacturer’s
specifications. All rack mounted equipment will be securely fastened using recommended manufacturer’s fasteners.
In addition to the installation of all components listed below, the contractor will be responsible for the buildout of
the south wall in room 206 to support the installation of the Video Wall.

- Testing and Check Out:

The Contractor shall test each audio visual component and provide methods and results to CISD prior to final
inspection.

Documentation will be provided and system will be accepted when tests have been completed, demonstrating that
the A/V systems conform to the specified requirements.

- The contractor shall provide training sessions to the Government which conforms to the requirements of the end-
users. Scheduling of training will be through either Government Technical Point of Contact.

-Parts Coverage: All system parts will be covered as part of the contract.

-Labor Coverage: All labor costs are covered as part of the contract.

- Service support availability:

The contractor shall provide technical phone support twenty-four (24) hours per day, seven (7) days a week, with
trained in-house staff or technicians.

-Items Not Covered:

The following items are not covered by this contract: Natural disaster.



8. INVOICING:

Invoicing will be done in four (4) payments and as needed. The invoices will be submitted in Wide Area Work
Flow (WAWF) to the following Financial POC:

Deaundra Webb, 229-639-8105
Ali Tillman, 229-639-9615


    1                                              Video Wall



    2         RGB Computer interface for Computer/laptop Connectivity (See MFN: RGB 109xi)

    3                         Creston 12" V-Panel Touch panel - Command Center

    4                        Crestron COM3 Serial interface (See MFN: C2COM-3)

    5                         Crestron Pro2 Dual Bus Processor (See MFN: PRO2)

    6                       Crestron 75 watt power supply (See MFN: CLX-PWS75)

    7                     Crestron Wideband RGB (See MFN: CEN-RGBHV32X32V)

    8                                         Blu-Ray/DVD Player
   9         Audio Authority 1366 Vide Conv for Blu-Ray/DVD Player (See MFN: AA-1366)

   10              BIAmp Nexia VC Digital Signal Processor (See MFN: NEXIA VC)

   11                           Ceiling Speakers (See MFN: JBL26CT)

   12                     Ceiling Mounted Microphones (See MFN: CR- MB3)

   13                          Audio Amplifier (See MFN: Crown 280A)

   14                 Matrox P690 Plus LP Quad Video Card (MFN: Matrox P690)

   15              Cable LFH60 M to 4XHD15 F Analog (See MFN: CAB-L60-4XAF)

   16                                      Component Rack

   17                         Miscellaneous Hardware/Cables/ Connectors

   18                 Custom Glass Top Table w/ space for two computers/monitors

   19                Custom work tables to match computer/monitor Glass top tables

   20                    One (1) year service warrant or maintenance agreement

   21                                     Custom Installation




Any request for a site visit please contact the Contracting Officer Sharon Humphrey 229-639-7130 email
sharon.humphrey@usmc.mil Greg Wade, 229-639-7574 email greg.wade@usmc.mil or James Scarborough, 229-
639-6600 email james.scarborough@usmc.mil .

				
DOCUMENT INFO
Shared By:
Categories:
Tags:
Stats:
views:14
posted:2/7/2012
language:English
pages:6