Autoobd

Document Sample
Autoobd Powered By Docstoc
					           AD-1 Auto Scanner




Features    Configuration   Software   Diagnose   FAQ
Features


                       1.Universal




                2.Wireless




 3.Remote diagnosing

                                     Home
Features


4.Platform: Operates on either XP or Vista operating systems.
5. Interface: USB "plug-and-play" technology and high baud
   transceiver for faster data transfer.
6. Report: Results can be saved and printed for later reference.
7. Upgrading: Software can be upgraded anywhere via internet.
8. Hardware: Anti-shock rubber guards for stronger, more
   durable usage.
…




                                                          Home
Configuration




AD-1 Multiplexer       Transceiver          Main Cable    USB Line




  Battery Clips    Ignition Lighter Cable    Adaptor     Storage Case

                                                             Home
Software Download




  AD-1 Client Software


  AD-1 USB Driver




Download Page: http://www.autoobd.net/english/download/download.asp


                                                          Home
Software Setup




         Install the AD-1 client software.

                                             Home
Main Interface




 If use the software at first time, please click the SETTING button
 and set COM port..
                                                                Home
Check COM Port




Check the CP210XUSB COM port from   And then set the same com port
Device Manager.                     in the AD-1 software as above.

                                                       Home
Wireless Connection




   Wireless communication can reach from 20 to 50 meters.



                                                       Home
Connection with wire




 You may operate the device based on any laptop or desktop.
 The diagnostic connectors would be different due to the vary vehicle.


                                                              Home
Diagnose




           Select the model of the car
           you want to diagnose
           ( JAPAN – TOYOTA )




                                         Home
Diagnose




           Select Connector type [ OBDII-16A ]




                                                 Home
Diagnose




           Select the system ( ENGINE )




                                          Home
Diagnose




           DIAGNOSE ITEM:
           Diagnostic Trouble Codes Information;
           Data Stream List;
           Active Test.




                                                   Home
Diagnose




           Test result: No fault code




                                        Home
Diagnose




           Data stream list
           (Simulation Testing result )




                                          Home
Diagnose




           Read ECU Memory
           (Audi/VW Testing result )



                                       Home
FAQ




      What can we do if the system still in wait state?
                                                          Home
FAQ




      Click RESET back to initial state.




                                           Home
FAQ




 It is due to the software com port setting failed. Go back to the
 software main page, click button “ SETTING”, and then select
 the correct com port.
 ( You may refer to the USB driver installation in this manual).
  If still same problem, re-plug the USB line and try it again.

                                                            Home

				
DOCUMENT INFO
Shared By:
Categories:
Tags:
Stats:
views:99
posted:2/7/2012
language:English
pages:20