Docstoc

Edge

Document Sample
Edge Powered By Docstoc
					Over the Edge:
Creating Unique Photo Edges using Photoshop
Elements
Why settle for the plain rectangular edges that you usually get on your photos? With
Elements, you can get creative.

We'll get you started here, by showing you the basic how-to, and three examples of cool
photo edges.

As you work through this tutorial, you'll learn or practice the following:

      Making an Elemask
      Using the Crop Tool
      Working with layers
      Using filters and filter options


Let's get going!

This tutorial is written with beginners in mind. It will work just fine with Elements in any
version later than 1. I don't know about v. 1. I wrote it using Photoshop CS and Elements
3, so the screenshots are from those programs. If you're using something else, your screen
will look a bit different from mine, but you'll get the same results.

If you're looking for a framed appearance for your photo, I have written two tutorials on
making frames in Photoshop. You will be able to do these in Elements, too!

You can find them here:




           Building a Bulletin Board: Making the Frame




           Framing a Picture with a Mitred Frame

You can also make different edges with the Cookie Cutter tool in Elements. Here's a
tutorial for that:



       More Edges in Elements


1. Crop the photo
Begin by cropping your photo to center the most relevant part of the picture. Don’t crop
away all that you eventually want cropped, though.

Choose the Crop Tool        and hit the Clear button in the Options bar at the top. Drag the
tool across your photo till your subject is centered. It's preferable to have MORE in the
picture than you will ultimately keep, to give your edge some breathing room.




2. Set up your layers
a) Double-click your photo layer in the Layers palette to make it a regular (not
background) layer.

b) Click the Create a New Layer icon on the Layers Palette. (or use Layer > New). Drag
it beneath your Photo layer in the Layers palette.

c) Click this new layer to make it active. Choose white for your foreground color and use
Alt-Backspace to fill this layer with white.

What you have now is two layers: Your photo layer and a layer of white.
3. Make the selection
Click the photo layer in the Layers palette. Now make a selection around the part of the
photo upon which you want to focus. The wider the margin you can get, the better.

Note: Turn off the Feather option in the Options bar before you make your selection.




4. Convert this selection to an Elemask
Click the icon for Create a New Adjustment Layer. It's a black and white circle, and
depending upon your Elements version, it's either on the top (v.3) or bottom (v.2) of the
Layers palette.

Choose Levels and click OK without changing anything.
Your image will not change, but the selection will go away.

Your Layers palette will look like mine to the right, with your selected part showing up in
white on a black background on the white square next to your Levels icon. That square is
going to be your Elemask.




                                    Hold your cursor between your Photo layer and your
Elemask layer and then press the Alt key. You'll see a little grouping icon like mine to the
right. Click!

Your Photo layer is now grouped to the Elemask layer...
                                                      ...and your image will look like this... well, it would




if you were using my photo!                                                                   c) Be sure that
your Elemask is active by clicking on it.




Click the Elemask, because that’s what we’re going to work on.


d) Choose and apply a filter to the mask.
      For this edge, I used Filter > Pixellate > Crystallize, with a cell size of 43. (Your
       mileage may vary, depending upon the size of your picture.)

TIP: View your image at it's finished output size to be sure that your edge is as
pronounced as you want it. Do this with your Zoom tool         .

The photo I used for this tutorial was much larger than this web image. The settings here
will have very different effects on a smaller image.




TIP: Can't see the edge in the preview
window? Hover over the window and
your cursor will turn into the Hand tool.
This enables you to drag the preview
around till you can see what you seek!




Now you can go a little (or a lot!) crazy! Whatever you do here is going to affect only
that MASK, not your actual photo, so you cannot hurt anything.
a) You may want to make several copies of the mask layer, so that you can play around
with possibilities.

To do this, first Ctrl-Z to undo any filtering you have done to the mask. Then drag the
Elemask layer to the New Layer icon in the Layers palette.

Repeat as many times as you want.

b) Turn off visibility eyes at the left side of the Layers palette for any masks you're not
working on.

c) Ungroup your photo to the old Elemask (by Alt-clicking between the layers again) and
regroup with a new one to try a new effect.




Digression: What's this all about?

The Elemask gives you ALL the functionality
your siblings with Photoshop have in their
Layer Masks. You have probably gotten a wee
idea of what these can do already. The part of
the mask that's painted black HIDES part of the
image. The part that's white, SHOWS that part
of the image.

We defined our initial masking here by making
a selection before creating the mask. But we
can also create an Elemask without making a
  selection first! Try this:

  Begin with a photo layer, a background, and an
  empty Elemask layer. Group the photo layer
  and the Elemask, as you did above. (See at
  right.)
i.         Click the Elemask. Make your
  foreground color black and Alt-Backspace to
  fill the mask with black. What happens to your
  image?
    ii.    Choose your Brush tool and use the
           Options Bar to choose a brush setup
           you like.
   iii. With white as your foreground color,
           paint some scribbles onto your canvas.
   iv.     Now press the X key on your keyboard.
           What does this do to your Foreground
           and Background colors?
    v.     Paint onto where you have just painted.
           What happens?
   vi.     Click the photo layer and use the Move
           tool to drag your photo around.

  Ok.. now let's get back to the tutorial and look
  at some more edge variations!


        For this version, I used Filter > Distort > Glass, with settings of 14, 3, Tiny Lens,
         190%. Again.. your settings will be different, depending upon the size of your
         photo and the size of your desired edge.
      Here -- How cool is this, anyway? -- I used Filter > Stylize > Extrude, with the
       following settings: Blocks, 30, 30, Random....




This made the block pattern over the entire mask, though, not just the border. So I want
the mask to be plain white where the photo is. Select > Reselect.

Fill the mask with white so that this part of the photo shows again. The result is the pic in
the previous frame.
      For a simple vignette, use Filter > Blur > Gaussian Blur, extending the blur as far
       as you can, whilst leaving some white around the very edge.




TIP: DO be careful not to take the
border all the way to the rectangular
edge of your photo, as this looks really
bad. You may need to extend your
canvas and clone more border onto
your photo layer so that you don’t chop
into your photo.
I hope you enjoyed this tutorial!




You can also make different edges with the Cookie Cutter tool in Elements. Here's a
tutorial for that:



      More Edges in Elements

				
DOCUMENT INFO
Shared By:
Categories:
Tags:
Stats:
views:1
posted:2/3/2012
language:
pages:11