Docstoc

2965312pdf - Download as PDF

Document Sample
2965312pdf - Download as PDF Powered By Docstoc
					- - - - - - - - - - - - - - - - MATERIAL SAFETY DATA SHEET - - - - - - - - - - - - - - Farnam
PRODUCT CODE: 1021-1608-270-A PRODUCT NAME: Hornet and Wasp Killer (Aerosol) IDENTITY (As Used on Label and List): Hornet and Wasp Killer (Aerosol) ----------------------------------------------------------SECTION I - PRODUCT IDENTIFICATION ----------------------------------------------------------MANUFACTURERS NAME: FARNAM COMPANIES, INC. 301 WEST OSBORN ROAD PHOENIX, AZ. 85013 TELEPHONE NUMBERS: 24 HOUR EMERGENCY NU: (602) 285-1660 BUSINESS HOURS: (602) 234-2269 MARKETING: (602) 285-1660 DATE ENTERED: 07/26/95 LAST REVISION: 07/26/95 SYNONYMS: CHEMICAL FAMILY: HAZARD LABEL: MOLECULAR FORMULA: MOLECULAR WEIGHT: NE or NA ----------------------------------------------------------SECTION II - HAZARDOUS INGREDIENTS/IDENTITY INFORMATION ----------------------------------------------------------HAZARDOUS COMPONENTS (SPECIFIC CHEMICAL OSHA ACGIH IDENTITY/COMMON NAME) PEL TLV PERCENTAGE ----------------------------------------------------------Pyrethrins 0.05 {Cyclopropanecarboxylic acid, 2,2-dimethyl-3...} CAS #: 121-21-1 OTHER LIMITS: N-OCTYL BICYCLOHEPTENE 0.25 DICARBOXIMIDE CAS #: 113-48-4 OTHER LIMITS: Permethrin 0.2 {Cyclopropanecarboxylic acid, 3-(2,2-Dichloroeth CAS #: 52645-53-1 OTHER LIMITS: Petroleum Solvent 0.1 - 40.0 CAS #: NA OTHER LIMITS: Petroleum gases, 0.1 - 40.0 liquefied {Propane mixtures} CAS #: 68476-85-7 OTHER LIMITS: ----------------------------------------------------------SECTION III - PHYSICAL/CHEMICAL CHARACTERISTICS ----------------------------------------------------------BOILING POINT: NE or NA MELTING POINT: NE or NA PHYSICAL STATES: GAS: LIQUID: X SOLID: SPECIFIC GRAVITY (WATER = 1): .968 at 20.0 deg C VAPOR PRESSURE (MM HG): NE or NA VAPOR DENSITY (AIR = 1): NE or NA EVAPORATION RATE (Butyl Acetate = 1): NE or NA SOLUBILITY IN WATER: NE or NA In emulsion PERCENT VOLATILE: NE or NA APPEARANCE AND ODOR: Milky, light yellow-colored emulsion.

HORNET AND WASP KILLER (AEROSOL)
----------------------------------------------------------SECTION IV - FIRE AND EXPLOSION HAZARD DATA ----------------------------------------------------------FLASH PT: NE or NA METHOD USED: Tag Closed Cup EXPLOSIVE LIMITS: LEL: UEL: EXTINGUISHING MEDIA: Foam, carbon dioxide, and dry chemical SPECIAL FIRE FIGHTING PROCEDURES: Treat as an oil fire; wear self-contained breathing apparatus pressure-demand, MSHA/NIOSH approved or equivalent) and full protective gear. Containers can build up pressure if exposed to heat (fire). Keep nearby containers cool with a water spray. Water runoff can cause environmental damage. Dike and collect water used to fight fire for proper disposal. UNUSUAL FIRE AND EXPLOSION HAZARDS: At temperatures above 130 degrees F., containers may rupture. ----------------------------------------------------------SECTION V - REACTIVITY DATA ----------------------------------------------------------STABILITY: Stable CONDITIONS TO AVOID - INSTABILITY: High heat and flame. INCOMPATIBILITY - MATERIALS TO AVOID: HAZARDOUS DECOMPOSITION OR BYPRODUCTS: None known HAZARDOUS POLYMERIZATION: Will not occur CONDITIONS TO AVOID - HAZARDOUS POLYMERIZATION: Product will not undergo polymerization. ----------------------------------------------------------SECTION VI - HEALTH HAZARD DATA ----------------------------------------------------------ROUTE(S) OF ENTRY: INHALATION? Yes SKIN? Yes EYES? Yes INGESTION? Yes OTHER: HEALTH HAZARDS (Acute and Chronic): CARCINOGENICITY: None of the ingredients are considered carcinogenic. NTP? IARC MONOGRAPHS? OSHA REGULATED? RECOMMENDED EXPOSURE LIMITS: LD 50/LC 50: Dermal LD50 >2.0 g/kg Oral LD50 >5.0 g/kg SIGNS AND SYMPTOMS OF EXPOSURE: May cause irritation to mucous membrane, skin, or eyes. Force of released product may damage eyes. MEDICAL CONDITIONS GENERALLY AGGRAVATED BY EXPOSURE: EMERGENCY AND FIRST AID PROCEDURES: IF IN EYES: Immediately flush eyes with plenty of water for at least 15 minutes. Get immediate medical attention. IF ON SKIN: Immediately flush with large amounts of water. Use soap if available. Remove contaminated clothing, including shoes, after flushing has begun. Get prompt medical attention. IF INHALED: Remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get immediate medical attention. IF INGESTED: If swallowed, do NOT induce vomiting. If vomiting occurs spontaneously, keep airways clear. Call a physician or poison control center immediately. Never give anything by mouth to an unconscious person.

Page 1 of 2

- - - - - - - - - - - - - - - - MATERIAL SAFETY DATA SHEET - - - - - - - - - - - - - - Farnam
----------------------------------------------------------SECTION VII - PRECAUTIONS FOR SAFE HANDLING AND USE ----------------------------------------------------------STEPS TO BE TAKEN IN CASE MATERIAL IS RELEASED OR SPILLED: Eliminate all sources of ignition. Contain the spill. Soak up with absorbent such as vermiculite, sand, or earth. Transfer into waste containers for proper disposal. Clean up the spill area with detergent and water. WASTE DISPOSAL METHOD: Dispose of according to local, State, and Federal regulations. HAZARD LABEL INFORMATION: Store upright in cool, dry place Store away from heat, sparks & flames Do not puncture or incinerate Avoid contamination of food & feed PRECAUTIONS TO BE TAKEN IN HANDLING AND STORING: Store in areas that are cool, dry and well-ventilated. Store away from heat, ignition sources and strong oxidizers. Do not contaminate water, feed or food by storage, handling, application or disposal. Do not puncture or incinerate aerosol container. Do not direct spray toward face. Read and follow all precautions and instructions on the product label. OTHER PRECAUTIONS: ----------------------------------------------------------SECTION VIII - CONTROL MEASURES ----------------------------------------------------------RESPIRATORY PROTECTION (SPECIFY TYPE): None generally needed if used as directed. VENTILATION: Mechanical ventilation may be useful when handling this product in enclosed spaces. PROTECTIVE GLOVES: Gloves to protect skin contact. EYE PROTECTION: Goggles or face shield OTHER PROTECTIVE CLOTHING OR EQUIPMENT: As needed to prevent skin contact. WORK/HYGIENIC/MAINTENANCE PRACTICES: Wash hands before eating, smoking, or using restroom. ----------------------------------------------------------SECTION IX - ADDITIONAL COMMENTS ----------------------------------------------------------IMPORTANT: The information and data herein are believed to be accurate and have been compiled from sources believed to be reliable. It is offered for your consideration, investigation and verification. ----------------------------------------------------------DISCLAIMER OF EXPRESSED AND IMPLIED WARRANTIES: although preparer and owner have taken reasonable care in the preparation of this document, we extend no warranties and make no representation as to the accuracy or completeness of the information contained herein, and assume no responsibility regarding the suitability of this information for the user's intended purposes or for the consequences of its use. Each user should make a determination as to the suitability of the information for their particular purpose(s). A request has been made to the manufacturer to approve the contents of this material safety data sheet. Upon receipt of any changes a new MSDS will be made available. ----------------------------------------------------------COMPAS Code: 29653120

HORNET AND WASP KILLER (AEROSOL)

Page 2 of 2


				
DOCUMENT INFO
Shared By:
Categories:
Tags:
Stats:
views:1
posted:9/12/2009
language:English
pages:2