; Disassembly & Reassembly
Learning Center
Plans & pricing Sign in
Sign Out

Disassembly & Reassembly


  • pg 1
									                                                                                3 Disassembly and Assembly

3 Disassembly and Assembly
This section describes the disassembly and reassembly sequences for this monitor.
     Warning: As this monitor has parts that are sensitive to static electricity, be careful when handling them.

3-1 Disassembly
     Caution: 1. Turn the monitor of before beginning the disassembly process.
              2. When disassembling the monitor, do not use any metal tools except for the provided jig.
              3. Disassemble the monitor carefully as directed in the following procedures.

                      Description                                       Photo                    Screws

1. Place a soft cloth on the table and place the
     monitor onto it with the back part facing
     forwards. Unscrew the base from the monitor

2.      Twist the screws for base out

3.   1) Twist the screws right side for front cover &
        back cover out

     2) Twist the screws left side for front cover &
       back cover out

                       Description                           Photo   Screws
4.   Turn the monitor over and insert your hands
     into the top of the monitor at the center and
     separate the front cover in the direction of the
     arrow as shown in the figure.

5.   Turn the monitor over again to remove the

6.    Remove the SHIELD-LAMP.
      Firstly hold chassis with one hand and bend
      the shielding in the direction of the arrow as
      shown in figure to unhook the shielding from
      the chassis.

      Caution: The SHIELD-LAMP is sharp.

                                                          3 Disassembly and Assembly

                  Description                     Photo                 Screws

7. Remove the LVDS, lamp wire and function
   cable then remove the chassis away

8. Remove the LCD panel.

9. Remove the key pad from the frontcover

10. Remove the LENS from the frontcover

11. Remove the 4 screws shown in the figure.

12. Remove the 7 screws shown in the figure.

13.   Remove the main PCB and IP board from the

*The assembly is in the reverse order of disassembly.

            3 Disassembly and Assembly



To top