August 12, 2009
MEETING NOTICE
ORGANIZATION: JC-11 Committee on Mechanical Package Outlines Standardization
DATE: October 7-8, 2009
CHAIRMAN: Takao Ono
Elpida Memory Inc.
t.ono.gz@elpida.com
HOTEL Hilton Salt Lake City Center
ACCOMMODATIONS: 255 South West Temple
Salt Lake City, Utah 84101
Telephone/Reservations: 801-328-2000
NOTES: For your convenience a limited amount of sleeping rooms have been
blocked for arrival beginning on October 6, 2009. The room rates are
single/double $159.00. The room block expires on September 15, 2009
reservations should be made promptly as the block may sell out prior to
the expiration date. Please identify yourself as a participant of JEDEC
when making your reservation.
AGENDA: Attached
SPECIAL NOTE: A $50.00 charge for non-dues paying Government attendees will be
collected at “all” JEDEC Committee and Subcommittee meetings,
maximum $150.00 for three or more attendees. This does not, in any
way, deprive the JEDEC office or the committee chairs from inviting
prospective guest and others to the meetings from time-to-time. Board
of Directors: Aug 1998
All guests attending JEDEC meetings must request permission from
respective chairman prior to attending the meeting(s).
Board of Directors: Feb 2000
#090315:ac:8/12/09
JC-11 Committee
Meeting No. 154
Hilton salt lake City Center
255 South West Temple
Salt Lake City, UT 84101
Tel: 801.328.2000
7 October 2009 (Wednesday) – 8 October 2009 (Thursday)
• All PRESENTATIONS/COPIES of outlines must be overprinted with a large "PROPOSED"
(non- obstructing) or they will not be considered for discussion or action at any JC-11
meeting.
• All PRESENTATIONS must have the JEDEC committee ballot template as the first page.
• The JESD30 package designation must be in the title block on page one of all outlines
proposed for ballot.
• The Wireless JEDEC Server WILL BE USED at this meeting. You will need an 802.11B
card or higher to connect to it. You will also need an FTP host. (If you need a FTP host,
JEDEC recommends Mozilla, FireFox, and FireFTP, free downloads).
• UPLOAD all your presentation material at least SEVEN CALENDAR DAYS
(30SEPTEMBER09) PRIOR to the meeting at:
www.jedec.org/scripts/item_mgmt/!33jc11al.
• FILE NAMING: If you already have an item number, use it as the FILE NAME, sponsor first
initial last name, meeting date for your upload, i.e., 1114-099JWilder_1009. If this is a
NEW ITEM please name the file by the committee, sponsor first initial last name, and date,
i.e., 1114JCarlson_1009. If presenting more than one item: 1114JCarlson1_1009,
1114JCarlson2_1009, etc.
• YOU ARE REQUIRED TO BRING 3 HARD COPIES TO THE MEETING AS
WELL AS TRANSPARENCIES FOR PRESENTATION PURPOSES.
• Point committee chair people shall be advised of any new business at least 14 calendar
days (23SEPTEMBER09)* prior to the first day of the upcoming meeting. The manner of
notification shall be at the discretion of the applicable point committee chairperson.
• REMINDER: Ballot results will not be discussed or acted upon at a meeting unless the
expiration date of that ballot has expired on the Wednesday before the meeting
(30SEPTEMBER09).
• If you are new to the group, a place card can be prepared via the JEDEC website:
http://www.jedec.org/download/tentcard.doc.)
* If you do not meet this deadline and still want to present your material, you must contact the
appropriate chair prior to the meeting for a slot on their agenda. You must also bring 3 hard
copies of the presentation material, transparencies and a soft copy of the material to upload to
the server.
JC-11 Committee
Meeting No. 154
Hilton salt lake City Center
255 South West Temple
Salt Lake City, UT 84101
Tel: 801.328.2000
7 October 2009 (Wednesday) – 8 October 2009 (Thursday)
PROPOSED AGENDA
ALL PRESENTATIONS/COPIES OF OUTLINES MUST BE
OVERPRINTED WITH A LARGE "PROPOSED"
OR THEY WILL NOT BE CONSIDERED FOR DISCUSSION OR ACTION AT ANY JC-11 MEETING.
Day 1 (Wed) (09:00 a.m.) ALL TASK GROUP Meetings - TBD
(11:00 a.m.) EXEC Executive committee meeting (Chairs)
(12:00 noon) ALL LUNCH
(01:00 p.m.) JC-11 Opening - and Self-Introduction of attendees
A) Review of previous JC-11 meeting's minutes.
B) Chairman's report/welcome new members
C) JEDEC Board of Directors Report
(02:00 p.m.) 11.2 Design Requirements, Glenn Koscal (Carsem)
(03:30 p.m.) 11.4 Uncased, Michael Ahr (Infineon)
(03:45 p.m.) 11.7 IEC Report, Christine Blair (STMicro)
(04:15 p.m.) 11.11 Microelectronic Plastics, Serafin Pedron (ASAT)
(05:00 p.m.) Break for the Day
Day 2 (Thu) (09:00 a.m.) ALL Executive Committee Report
(09:30 a.m.) ALL Any Carried over business from Day 1
(10:00 a.m.) 11.14 Micro-Assemblies, John Lynch (Intel)
(05:00 p.m.) Adjournment (Estimate)
NOTE 1 JC-11.1, JC-11.5, JC-11.9, JC-11.10, and JC-11.13 are inactive. The duties of these
Subcommittees will be handled by the other relevant subcommittees as needed.
NOTE 2 This agenda is tentative and subcommittees on Thursday may be moved into Wednesday if
time allows.
Please plan to attend the entire meeting to be sure you are present for the activities of interest to your
company.
JC-11 Committee
Meeting No. 154
JEDEC PATENT POLICY
The JEDEC Patent Policy can be found in the following sections of the JEDEC Manual
21L: the Notice page, Sections 5.1, 8, 8.2, and 8.3, and Annexes A and B.
http://www.jedec.org/Home/manuals/JM21N.pdf
“8.2 References to patent products in JEDEC standards and publications
JEDEC standards and non-product registrations (e.g., package outline drawings) that
require the use of patented items should be considered with great care. (For the
purpose of this policy, the term “patented items” includes items and processes for which
a patent has been applied). While there is no restriction against drafting a proposed
standard in terms that include the use of a patented item if technical reasons justify the
inclusions, committees should avoid standardization that refers to a product on which
there is a know patent unless all the relevant technical information covered by the
patent is known to the formulating committee, subcommittee, or task group.
If the committee member indicates that the standard requires the use of patented items.
Then the committee chairperson must receive a written assurance from the organization
holding rights to such patents that a license will be made available to applicants desiring
to implement the standard either without compensation or under reasonable terms and
conditions that are demonstrably free of any unfair discrimination.
Additionally, when a known patent item is referred to in a JEDEC standard, a cautionary
note, as outlined in this document, shall appear in the JEDEC standard.
All correspondence between the patent holder and the formulating committee, including
a copy of the written assurance from the patent holder discussed above, shall be
transmitted to the JEDEC office and the JEDEC Legal Counsel at the earliest possible
time and, in any case, before the standard is otherwise ready for committee ballot
circulation. (Also see JEDEC Style Manual JM7 for the required language in a JEDEC
standard that cites a product with a known patent.) “
Revised 05/22/2007
JC-11.2 Design Requirements
Agenda and Item Log Meeting #154
Salt Lake City, UT: 7 - 8 October 2009
Current Business Item Log
New Business
New business will be placed on the JC-11.2 agenda in the order received by
the JC-11.2 chairman.
New business proposals for the October 2009 meeting must be submitted to
the Chairman no later than 30 Sept. Based on time constraints, late
submission material may not be considered until a subsequent meeting. Allow
no fewer than 3 weeks when submitting items for review before balloting.
Last date for ballot release for the October meeting is 16 Sept 2009.
New business proposals for the February 2010 meeting must be submitted to
the Chairman no later than 3 Feb. Based on time constraints, late submission
material may not be considered until a subsequent meeting. Allow no fewer
than 3 weeks when submitting items for review before balloting. Last date for
ballot release for the February meeting is 20 Jan 2010.
Glenn Koscal
Carsem Inc.
269 Mt Hermon Road #104
Scotts Valley, Ca 95066
Tel: (831) 440-6807 / Fax: (831) 438-6863
Email: gkoscal@carsem.com
JC-11.2 Design Requirements
Agenda and Item Log Meeting #154
Salt Lake City, UT: 7-8 October 2009
ITEM LOG
Item No. Log In Date Sponsor Responsible/Description
11.2-794S 4/07/08 Stats-ChipPac
Flynn Carson - Fan-in PoP (FiPoP) Design Guide. This item
is officially cancelled due to prolonged innactivity
Wright / Lusk- Ballot to Revise PoP Design Guide (4.22)- Item
11.2-808S 10/22/08 Texas Instruments
number to be cancelled. Contents will be included in item 11.22-819.
(Ed Poh)- (SPP-023) - BoD ballot passed by acclamation. Ready
11.2-781S 11/1/07 Molex to be published.
(Results will be officially presented at October mtg.)
Fuentes - Demote PoP Design Guide (4.22) to a design registration
and add provisions for molded vias on the top surface of the bottom
Amkor /
11.2-819 1/10/09 pkg. Add in additional variation as proposed by Micron. Add in ball
Texas Instruments
location requirements per STMicro. Ballot results were not
presented in July mtg. Table this until the October mtg.
England- Revision to Design Guide 4.20 to modify the definition
11.2-820R 5/26/09 Fairchild of “small scale”. Ready for ballot as a design registration.
NEW BUSINESS
Item No. Log In Date Sponsor Responsible/Description
Leidy/Koscal- Add classification to JESD 30 to cover pkg
configurations for Solid State Disks. No action required at this time.
1/10/09 Tyco Electronics JESD 30 already has this part classified as a “DIM”. This item will
be officially removed at the October mtg.
Ref JC11 Subcommittee Review Design Registration 4.24 to see if it is stable enough for
2/06/09
(11.2-810s) Chair elevation to Design Guide Standard- Due before July 2010 mtg
Blair – Interpretation of flatness specification in POP design guide
4.22. Task group has been formed and given the authorization to
07/ 08/ 09 ST-Micro
go out for ballot once they agree on a definition. Review task
group results at October mtg.
JC-11.2 agenda 2009-Oct-rev 0
2
JC-11.7 IEC Interface
AGENDA
Salt Lake City, UT, 7-8 October 2009
USA RESPONSE TO IEC BALLOTS
REVIEW COMPILATION OF COMMENTS/RESULTS OF VOTING
DISCUSS NEW USA PROPOSALS TO IEC
FUTURE MEETINGS
2009-10-19 Tel Aviv (IL) (CANCELLED for SC47D)
2009-11-25/26 Munich (GE)
2010-06-07 Geneva (CH)
2010-10-12 Seattle (US)
MAJOR ISSUES
Funding for hosting Seattle 2010-Oct meetings.
JEDEC BoD approved funding.
Christine Blair
STMicroelectronics, Inc.
1310 Electronics Dr. M/S 648
Carrollton, Texas 75006
Tel: (972) 466-8405 / Fax: (972) 466-6838
Email: christine.blair@st.com
1
JC-11.11 Microelectronics Plastic Packages
Agenda and Item Log Meeting #154
Salt Lake City, UT: 7 - 8 October 2009
Current Business Item Log
New Business
Published Outlines as of July 2009 Meeting
New business will be placed on the JC-11.11 agenda in the order received by
the JC-11.11 chairman.
New business proposals for the October 2009 meeting must be submitted to
the Chairman no later than 30 Sept. Based on time constraints, late
submission material may not be considered until a subsequent meeting. Allow
no fewer than 3 weeks when submitting items for review before balloting.
Last date for ballot release for the October meeting is 16 Sept 2009.
New business proposals for the February 2010 meeting must be submitted to
the Chairman no later than 3 Feb. Based on time constraints, late submission
material may not be considered until a subsequent meeting. Allow no fewer
than 3 weeks when submitting items for review before balloting. Last date for
ballot release for the February meeting is 20 Jan 2010.
Serafin Pedron
Chairman - JC-11.11
ASAT, Inc.
490 N. McCarthy Blvd., Ste. 200
Milpitas, CA 95035
Tel: (408) 964-7479
E-mail: serafin_pedron@asat.com
JC-11.11 Microelectronics Plastic Packages
Agenda and Item Log Meeting #154
Salt Lake City, UT: 7-8 October 2009
CURRENT BUSINESS ITEM LOG
Log In
Item No. Sponsor Description
Date
11-813 10/09 Amkor New outline for TMV PoP. Publication pending design
registration approval and receipt by JEDEC of TI & Micron
Tech patent letters. Review reballot results.
11-815 01/08 On Semi Add variation CA to MO-240A
Passed. To be published as MO-240/B.
11-817 02/25 Micron 52L interstitial land grid array family, 0.5 mm ball pitch,
rectangular. Review ballot results.
11-818 02/25 Micron 100L ball grid array family, 1.0 mm ball pitch, rectangular.
Review ballot results.
11-821 05/15 Fairchild Addition of 4 new variations to MO-288.
Review ballot results.
11-822 07/09 Infineon New surface mount power package H-PSOF
Review ballot results.
NEW BUSINESS
Log In
Item No. Sponsor Description
Date
06/05 Amkor Revise MO-292 to change the isolation trench dimension
07/16 Toshiba / 112-ball BGA
Samsung
PUBLISHED Outlines as of July 2009 Meeting
Log In
Item No. Sponsor Description
Date
11-812 09/22 TI Add new variation to MO-273A
Passed by acclamation. Published as MO-273/B.
11-814 12/12 Spansion Add new variation to MO-246D.
Passed by acclamation. Published as MO-246/F.
11-816 02/20 ST Micro New FBGA family of T/V/W thk. profiles at 0.40mm pitch.
Passed by acclamation. Published as MO-298/A.
2
JC-11.14 MICROELECTRONIC ASSEMBLIES
October 7-8, 2009
Salt Lake City, UT
Current Business Item Log
New Business
New business will be placed on the JC-11.14 agenda in the order received by the
JC-11.14 chairman.
New business proposals for the October 2009 meeting must be submitted to the
Chairman no later than 30 September. Based on time constraints, late submission
material may not be considered until a subsequent meeting. Allow no fewer than 3
weeks when submitting items for review before balloting. Last date for ballot release
for the October meeting is 16 September 2009.
New business proposals for the February 2010 meeting must be submitted to the
Chairman no later than 3 Feb. Based on time constraints, late submission material
may not be considered until a subsequent meeting. Allow no fewer than 3 weeks
when submitting items for review before balloting. Last date for ballot release for the
February meeting is 20 Jan 2010.
John Lynch
Intel Incorporated.
20420 NW Von Neumann Drive
Beaverton, OR 97006-6942
Tel: (503) 456-1320 / Fax: (503) 456-1224
Email: john.m.lynch@intel.com
CURRENT BUSINESS
Item No. Log-in Sponsor Description Status
Date
14-105 Oct06 Tyco Proposal for DDR2 ULP DIMM Connector. On Hold-
TG agreed on title change 04/08. Publish Approved to
as SO-010 Issue A Publish Apr07
14-129A July08 Elpida Approved to
Proposal to modify MO-269
Publish April
11.14-08369. Assigned MO-269F.
2009
Oct./08 Tyco PS-001 Editorial changes. Awaiting new
On Hold
JC-45.5 S-parameter electrical
Waiting for JC-
specification document number.
45.5
“Module_4_20_18” has the S-parameter
JC-11.14 MICROELECTRONIC ASSEMBLIES
October 7-8, 2009
Salt Lake City, UT
buried within the document and not easy
to find. S-parameter document # needs
referenced in PS-001.
NEW BUSINESS
Item Log-in Sponsor Description Status
No. Date
July09 Samsung SATA Mini Card SSD
Work Group
JC-11.14 MICROELECTRONIC ASSEMBLIES
Recent JC11.14 Ballots Published & Completed
14-129A July08 Elpida Approved to
Proposal to modify MO-269
Publish April
11.14-08369. Assigned MO-269F.
2009
14-130 May09 Tyco Publish
Slim Light SSD Outline. Assigned MO-297A
August 2009
JC-11.14 MICROELECTRONIC ASSEMBLIES
October 7-8, 2009
Salt Lake City, UT