How to Install Fold-Away Bifold Doors by allaboutdoors

VIEWS: 398 PAGES: 5

More Info
									http://www.allaboutdoors.com                                                       Published 1/17/2011


                          How to Install Float-Away Bifold Doors
               For Questions or Concerns, please refer to All About Doors & Windows
                                http://www.allaboutdoors.com

                                                                      Install Track:

                                                           1. Position upper track 5/8" (16mm)
                                                              from edge.

                                                           2. Center in opening.

                                                           3. Fasten with screws.

                                                           4. Fasten bottom track directly below
                                                              upper.




                                                                      Hang Door:

                                                          5. Insert threaded pivot pin in lower pivot
                                                             block hole.

                                                          6. Pull upper pivot pin down and engage
                                                             in pivot block hole.

                                                          7. Pull remaining pins down at top and up
                                                             on bottom and engage in track.




             All About Doors & Windows   |   1901 Cherry St. Kansas City, MO 64108-1714
http://www.allaboutdoors.com                                                        Published 1/17/2011


                                                                   Adjust Height:

                                                      8. Loosen locknut.

                                                      9. Turn threaded pivot pin until top of door is
                                                         1/8" (3mm) below track. Tighten locknut.




                          How to Install Handle on Mirror Door:




   1. Insert handle in slot on edge of door.

   2. Rotate handle 90 degrees.

   3. Push handle through slot.

   4. Secure handle to door flange.

             All About Doors & Windows     |   1901 Cherry St. Kansas City, MO 64108-1714
http://www.allaboutdoors.com                                                        Published 1/17/2011




                          How to Limit Door Travel (If Desired):




   1. Remove door.

   2. Unsnap upper guide pin from present location and snap into adjacent hole. Repeat for lower
      guide pin.




                                                  How to Adjust Doors Horizontally (If
                                                             Necessary)

                                                1. If doors are not in line, loosen screws in top and
                                                   bottom tracks.

                                                2. Shift tracks in opposite directions to correct.
                                                   Tighten Screws.

                                                3. **Note: If bottom track is fastened to cement,
                                                   loosen pivot block screws and slide pivot blocks
                                                   to correct.




             All About Doors & Windows   |   1901 Cherry St. Kansas City, MO 64108-1714
http://www.allaboutdoors.com                                                      Published 1/17/2011


                         Knob Installation for Non-Mirror Door:




                                                           How to Install Felt Pads:

                                                   1. Remove felt pads from plastic bag. Peel pad
                                                      from backing.

                                                   2. Place pads on edge of door opposite each
                                                      hinge.




             All About Doors & Windows   |   1901 Cherry St. Kansas City, MO 64108-1714
http://www.allaboutdoors.com                                                      Published 1/17/2011



                                                          Special Instructions to Change
                                                           Opening Direction of Door:

                                                         1. Remove door.

                                                         2. Unsnap pins and move to similar
                                                            location on opposite panel.

                                                         3. Snap into holes.




                                                           Special Instructions for Doors
                                                              Without Knob Holes:

                                                          1. Drill 3/16" hole in guide panel for knob.




             All About Doors & Windows   |   1901 Cherry St. Kansas City, MO 64108-1714

								
To top