Mikrotik Transparent Bridge (DOC) by cblastname

VIEWS: 208 PAGES: 2

More Info
									First Step:
- Install Mikrotik (here used v2.9.6)
- Login to Mikrotik, can also use if you want to configure via Winbox network
 Type:
  [Admin @ MikroTik]> interface bridge add name = bridge1 disabled = no arp = enabled

 or when using Winbox as shown below:




 Then type:
  [Admin @ MikroTik]> interface bridge port set ether1 bridge = bridge1
                       priority = 128 path-cost = 10
  [Admin @ MikroTik]> interface bridge port set = bridge1 ether2 bridge
                       priority = 128 path-cost = 10

  or when using Winbox as shown below :




Then type:
   [Admin @ MikroTik]> ip address add address = 192 168 100 254 netmask = 255.255.255.0
                        interfaces = bridge1 disabled = no
                        (This is to give the ip address on bridge interface)

   or when using Winbox as shown below:
   After the above steps have been completed, we check for certainty

    [Admin @ MikroTik]> interface bridge print
    Flags: X - disabled, R - running
    0 R name = "bridge1" mtu = 1500 arp = enabled mac-address = 00:15: E9: XX: XX: XX stp
         = no
         priority = 32 768 aging-time = 5m forward-delay = 15s
         garbage-collection-interval = 5s hello-time = 2s max-message-age = 20s

    [Admin @ MikroTik]> ip address print
    Flags: X - disabled, I - invalid, D - dynamic
    # ADDRESS NETWORK BROADCAST INTERFACE
    0 192.168.100.254/24 192.168.100.0 192,168,100,255 bridge1

   If you have arrived here using mikrotik setting the transparent bridge has been
   completed.
   we can check using ping in mikrotik facility to find out if already connected
   or not

   [Admin @ MikroTik]> ping 192.168.100.10
   192.168.100.10 byte ping: ttl = 64 time = 1 ms
   192.168.100.10 byte ping: ttl = 64 time = 1 ms
   192.168.100.10 byte ping: ttl = 64 time <1 ms
   3 packets transmitted, 3 packets received, 0% packet loss
   round-trip min / avg / max = 0/0.6/1 ms

   We can also check the connections from elsewhere:
   C: \ Documents and Settings \ Administrator> ping 192 168 100 254
   192 168 100 254 Pinging with 32 bytes of data:

   Reply from 192 168 100 254: bytes = 32 time = 1ms TTL = 64
   Reply from 192 168 100 254: bytes = 32 time <1ms TTL = 64
   Reply from 192 168 100 254: bytes = 32 time <1ms TTL = 64
   Ping statistics for 192 168 100 254:
   Packets: Sent = 3, Received = 3, Lost = 0 (0% loss),
   Approximate round trip times in milli-seconds:
   Minimum = 0ms, Maximum = 1ms, Average = 0ms

Hopefully Helpful ...

								
To top