Automobile Quotation Format by kxc20152

VIEWS: 340 PAGES: 22

More Info
									                                  Government of Tripura
                                Industrial Training Institute
                              Indranagar, Agartala-799006
                                    Ph-0381-2355870



NO.70/ITI/TRG/CoE-PTE/2008/123                                  Dated, Agartala the
02-06-2010


                              NOTICE INVITING QUOTATION


Quotations in sealed envelopes are hereby invited on behalf of the Governor of
Tripura from Manufacturers/Authorized dealers / bonafied suppliers for supplying
Tools, Equipments, Machineries etc.


      National shopping (Package No- 9 – Tools and Instruments for Trades to be
      Upgraded – 256 Items) under Centrally Sponsored Scheme, Vocational
      Training Improvement Program (VTIP) with World Bank Assistance (Cr. No-
      4319 IN) for Supplying, Installation (where necessary) and commissioning
      (where necessary) of Workshop tools, equipment, machineries for Center of
      Excellence Project in Automobile Sector in Industrial Training Institute,
      Indranagar, Agartala, Tripura.
      Last date of submission of quotation: -15/06/2010 up to 3.00 PM
      Period of completion of supply: - 45(Forty Five) days.
      Standard format for submission of quotation (E5) may be seen in the
      website or in the office of the undersigned on any working days between
      04/06/2010 to 15/06/2010.
      The quotation shall be opened on 06/07/2010 at 2:00 PM in presence of
      bidders or authorised representative who wishes to remain present.
      Standard format for submission of quotation, terms and conditions, list of
      tools & equipments etc. may be obtained from the office of the
      undersigned on or before 15/06 /2010.
      Details can also be seen in the website www.tenders.gov.in and
      www.ititripura.nic.in
                                                                 Principal, ITI Indranagar,
                                                                        Agartala,Tripura,
                                                          For State Project Director, SPIU
                                                                          Govt. of Tripura



GENERAL RULES & DIRECTION FOR SUBMISSION OF QUOTATION FOR SUPPLY OF
TOOLS & EQUIPMENTS IN CENTER OF EXCELLENCE (COE), ITI, INDRANAGAR,
AGARTALA, TRIPURA (WEST) NATIONAL SHOPPING UNDER CENTRALLY SPONSORED
SCHEME VTIP WITH WORLD BANK ASSISTANCE

A.          INTRODUCTION:

      1) Head of SPIU, Director (I&C) on behalf of the Govt. of Tripura is intending to
         procure certain Engineering Tools & Equipments for implementation of VTIP
         Centrally Sponsored Scheme VTIP with World Bank Assistance in Automobile
         Sector in Industrial Training Institutes, Indranagar, Agartala during the
         financial year 2010-11.
      2) Sealed Quotations are invited from the reputed manufacturers/ suppliers/
         authorized dealers/small scale industries/suppliers having experience
         dealing with Engineering Tools & Equipments for supplying the item of
         equipments & machines.

B.          TERMS & CONDITION

            The following criteria should be fulfilled for submission of quotation for
            supplying of tools & equipments for CoE and the documents should be
            enclosed along with the offer in a separate sealed envelope.

      I.     “Performance Certificate” for similar nature of supply of engineering tools
             & equipments in a Government Organization, preferably in Tripura, for at
             least one similar work of value not less than 50% of the total quoted price
             in the last two financial years.
      II.    Documents indicating period of warranty and scopes of AMC (optional)
             for the items after expiry of the warranty period,
     III.    During entire period of supply, warranty and AMC (optional), the supplier
             shall require to ensure that our call is responded to within one week in
             person at the cost of the supplier.
     IV.     Signed copy of an agreement (As per annexure ‘A’ enclosed herewith).
      V.     Report on Quotationer/ tenderer’s financial capability supported by bank
             statement having financial capability/ transaction equivalent to bidding
             amount in the last financial year.
     VI.     The supply of tools & equipments are liable to a defects liability period of
             one year from the date of delivery/installation.
 VII.        Letter assuring submission of performance guarantee for ensuring post
             supply service facilities. Performance guarantee of 10% of total quoted
             value of the package has to be deposited in the form of Bank
             Guarantee/Draft in favour of State Director, SPIU from any nationalized
        bank payable in Tripura by the eligible Quotationer before awarding
        supply order.
VIII.   The offer would be summarily rejected if all the required documents are
        not found in the sealed cover of Quotationer /tenderer’s.

        Further, the documents supporting compliance with the Terms and
        Conditions as stated above should be enclosed in a sealed envelope
        marked as “Envelop-I: Qualifying documents”.




  C. Quotations as per shopping mode:

       Prescribed format (E5) will be provided to the eligible bidder for quoting
      specifications and rates. Suppliers would quote latest specification and
      rates for respective item of equipments.
  (a) Prescribed Format (E5) as per World Bank guidelines may be provided to
       the eligible bidder for quoting specifications and rates. Additionally
       “General Rules & Direction for submission of quotation for supply of Tools &
       Equipments In Center of Excellence (CoE), ITI, Indranagar, Agartala, Tripura
       (West) National Shopping Under Centrally Sponsored Scheme VTIP with
       World Bank Assistance” would be provided to the intending Quotationer to
       follow the instructions.
  (b) Suppliers would quote latest specification and rates for respective item of
       equipments.
  (c) Rates are to be quoted in Format (E5) for brand new items separately for
       each item along with the specification offered. The rate quotation (in E5
       Format) should be submitted in a separately sealed cover with a well-
       protected soft copy (in CD).
  (d) The rates quoted must be F.O.R. destination and inclusive of all duties,
       charges and taxes, insurance, packing, forwarding, handling, installation
       and commissioning (where applicable).
  (e) For convenience, while quoting rates, the same serial numbers of items as
       mentioned in the list are to be maintained by the Bidders.
  (f) The rates must be quoted in figure as well as in words, preferably in type
       written form. If there is any discrepancy in figures and words, the amount in
       words will prevail. Prices shall be quoted in Indian Rupees only.
  (g) The rates quoted by the bidder must remain valid for 30 (thirty) days from
       the date of opening of the quotation.
  (h) The quotation should be submitted in the Office of the Principal, ITI,
       Indranagar, Agartala, Tripura West, Pin-799006 on or before 15/06/2010 at
       the risk of the bidder. Any quotation received after the deadline for
       submission of bids will be summarily rejected and returned unopened to
       the bidder.


  Further, the rates quoted in Format (E5) should be enclosed in a sealed
  envelop marked as “Envelop-II: Format (E5)”.
     Both the envelops- “Envelop-I: Qualifying documents” and “Envelop-II: Format
     (E5)” –shall thereafter be placed inside in a sealed cover and the same may
     be submitted.

     While opening “Envelop-I: Qualifying documents” will be opened first, if found
     eligible “Envelop-II: Format (E5)” –shall be opened thereafter. Evaluation would
     be made by the Committee constituted for that purpose.

D.      GENERAL TERMS & CONDITIONS:


         I. The purchaser reserves the right to drop any item/items at the time of issue
            of supply orders. Preference may be given to the best specification of any
            or all the items irrespective of cost and decision of the evaluation
            committee will be final.
        II. The undersigned reserves the right to waive any minor informality or non-
            informality or irregularity in a quotation which does not constitute a
            material deviation, provided such waiver does not prejudice or affect the
            relative ranking of any bidder.
       III. No other terms & condition of the bidder shall be accepted which
            contradict partially or wholly any of the terms and conditions mentioned
            herein.
      IV. Authority reserves the right to reject any or all the Quotations or part
            thereof without assigning any reason.
       V. Selected bidder should supply all the items as per supply order to the
            consignee concerned within the stipulated period. In case of failure of the
            supplier to supply wholly or partially the items ordered by the purchaser as
            per the terms & conditions, the Performance Guarantee may be invoked
            at the discretion of the authority.
      VI. In case of any difficulty in supplying of item(s) awarded for supply it may
            be brought to the notice of the purchaser within one month of placing
            the supply order with supporting documents for appropriate decision.
     VII. No modification / change in the Quotations are permissible after opening
            of Quotations.
     VIII. The transportation of tools & equipments to the destinations in good
            conditions shall be at supplier’s risk and responsibility.
      IX. The tools, equipments and machineries etc. will have to be delivered to
            the Principal, ITI, Indranagar, Agartala, Tripura.
       X. The supply is to be completed within 45 (Forty Five) days if awarded. The
            time shall be reckoned from the date of issue of Purchase Order.
      XI. Payment to the supplier will be released by the Head of SPIU or his
            representative after deduction of applicable taxes as per rule.
     XII. Demonstration and operation will have to be exhibited by the
            Supplier/manufacturer’s representative in respect of the equipments as
            and when called for at his own cost.
     XIII. The supplier shall:
              a. have service center at Agartala to attend any call from the
                 purchaser or representative for any difficulties and solve problem
                 within three days.
              b. employ suitable skilled persons to carry out the installation and
                 commissioning, if required;
            c. keep the first party informed about the progress of work;
            d. be responsible for all security and watch and ward arrangements at
               site till completion of the work and handing over as well.
     XIV. Rates should be quoted for all the items of the package by the
          quotationer positively, without which the quotation will be summarily
          rejected and the bid will not be evaluated and there will not be any claim
          for consideration of either specification or rates.
     XV. The Quotations would be evaluated for all the entire item of the package
          together.
     XVI. For any disputes decision of the authority shall be final.

E.      Opening of Quotation

         i.    Venue: Office of the Director (I&C), Pt. J N Complex, Kunjaban,
               Agartala, Tripura West, Pin-799006.
        ii.    The Qualifying bid will be opened on 06/07/2010 at 2.00 pm, if
               possible. Bidders or one authorized representative of each Bidder
               may remain present at the time of opening, if wishes to.

F.      Evaluation of tender: -

        The purchaser will evaluate and compare the quotations determined to be
        substantially responsive i.e. which
        (a) meet the qualification criteria
        (b) are properly signed and
        (c) conform to the terms and conditions and specifications


        PRELIMINARY EVALUATION /EXAMINATION, COMPARISON AND APPROVAL
        ACCEPTANCE OF THE RATES:

        The tender evaluation committee constituted by the Government will make
        the examination of the quotations. The Committee constituted will also
        compare and evaluate the quoted specification and rates. Decision of the
        Committee will be final to accept or reject any or all specification and
        rates. Finally, the Committee will forward the cases to appropriate authority,
        Government of Tripura to accord final approval for procurement.

G.     Award of contract

       The Purchaser will award the contract to the bidder whose bid has been
       determined to be substantially responsive i.e. who meets the specified
       qualification criteria, specifications of each item of equipments intended to
       be purchased and offered the lowest evaluated bid price for all the entire
       item of the package together in accordance to intended/desired
       specification considered by the tender evaluation committee.
          1.   Notwithstanding the above, the purchaser reserves the right to
               accept or reject any of quotations and to cancel the process and
               reject all quotations at any time prior to the award of contract.
          2.   The bidder whose bid is accepted will be awarded of supply by the
               purchaser prior to expiration of the quotation validity period. The
      terms of the accepted offer shall be incorporated in the purchase
      order.
 3.   In case of certain ground, award of contract delays, quotationer
      may be requested to extend validity period, if mutually agreed upon.



                                                     Principal, ITI Indranagar
                                              For State Project Director, SPIU
                                                             Govt. of Tripura




                                                                 Annexure A


                   DECLARATION OF THE TENDERER


I/We hereby declare that I/We have personally gone through the
“GENERAL RULES & DIRECTION FOR SUBMISSION OF QUOTATION FOR SUPPLY
OF TOOLS & EQUIPMENTS IN CENTER OF EXCELLENCE (CoE), ITI,
INDRANAGAR, AGARTALA, TRIPURA (WEST) NATIONAL SHOPPING UNDER
CENTRALLY SPONSORED SCHEME VTIP WITH WORLD BANK ASSISTANCE” for
National shopping for ITI, Indranagar, Agartala, Tripura and also the clauses
of the quotation in the notice inviting quotation for the supply.

I/We am/are agreeing to accept the above terms and conditions made by
the SPIU, Tripura State.

I/We hereby declare that I/we are agreeable to accept payment after
actual delivery of tools & equipments at the destination in perfect condition
to the best of satisfaction of the authority after successful testing,
commissioning, demonstration and operation as may be necessary and as
per ordered specifications in case of orders are received by me/us against
the     notice     inviting     quotation      NO.70/ITI/TRG/CoE-PTE/2008/
_____________dated, 02/06/2010




                                For and on behalf of


Date ………………….                   Name:
                                Signature:
Place…………………..                  Seal of the Firm/Supplier




                                                            E-5
  PROCUREMENT OF GOODS
           UNDER
NATIONAL SHOPPING PROCEDURES

(For Contracts valued less than the
 equivalent of US $1,00,000 each)
                    INVITATION FOR QUOTATIONS FOR SUPPLY OF
                  GOODS UNDER NATIONAL SHOPPING PROCEDURES

To
      ___________________________________
      ___________________________________
      ___________________________________
      ___________________________________


Dear Sirs,


      Sub: INVITATION FOR QUOTATIONS FOR SUPPLY OF Package No- 9 –
      General Equipments and Machineries for Trades to be Upgraded – 256
      Items


1.    You are invited to submit your most competitive quotation for the following
      goods:-

      Brief        Specifications*    Quantity     Delivery    Place     Installation
  Description                                       Period       of      Requireme
 of the Goods                                                 Delivery     nt if any




                                     Annexure-B


      *Where ISI certification marked goods are available in market,
      procurement should generally be limited to goods with those or equivalent
      marking only.


2.    Government of India has received a credit from the International
      Development Association (IDA) in various currencies towards the cost of the
      VTIP Project and intends to apply part of the proceeds of this credit to
      eligible payments under the contract for which this invitation for quotations
      is issued.

3.    Bid Price

      a)      The contract shall be for the full quantity as described above.
              Corrections, if any, shall be made by crossing out, initialing, dating
              and re writing.
      b)      All duties, taxes and other levies payable on the raw materials and
              components shall be included in the total price.
      c)    Sales tax in connection with the sale shall be shown separately.
      d)    The rates quoted by the bidder shall be fixed for the duration of the
            contract and shall not be subject to adjustment on any account.
      e)    The Prices shall be quoted in Indian Rupees only.


4.    Each bidder shall submit only one quotation.

5.    Validity of Quotation

      Quotation shall remain valid for a period not less than 30 days after the
      deadline date specified for submission.

6.    Evaluation of Quotations

      The Purchaser will evaluate and compare the quotations determined to be
      substantially responsive i.e. which

      (a)   are properly signed ; and

      (b)   conform to the terms and conditions, and specifications.

     The Quotations would be evaluated for all the entire item of the package
 together.

      Sales tax in connection with sale of goods shall not be taken into account in
      evaluation.

7.    Award of contract

      The Purchaser will award the contract to the bidder whose quotation has
      been determined to be substantially responsive and who has offered the
      lowest evaluated quotation price.

7.1   Notwithstanding the above, the Purchaser reserves the right to accept or
      reject any quotations and to cancel the bidding process and reject all
      quotations at any time prior to the award of contract.

7.2   The bidder whose bid is accepted will be notified of the award of contract
      by the Purchaser prior to expiration of the quotation validity period. The
      terms of the accepted offer shall be incorporated in the purchase order.

8.    Payment shall be made immediately after delivery of the goods.


9.    Normal commercial warranty/ guarantee shall be applicable to the
      supplied goods.


10.   You are requested to provide your offer latest by 3.00 hours on 15/06/2010
11.     We look forward to receiving your quotations and thank you for your
        interest in this project.


                                                                              Principal, ITI Indranagar,
                                                                                       Agartala,Tripura,
                                                                       For State Project Director, SPIU
                                                                                        Govt. of Tripura
                                                                                 Tel. No. 0381- 2355870
                                                                                Fax No- 0381- 2324432


                                        FORMAT OF QUOTATION

Sl.     Description            Specifications Qty. Unit Quoted Unit                      Total Amount
No.     Goods of                                        Rate in Rs.

                                                                                         In            In
                                                                                         Figures       Words




           We agree to supply the above goods in accordance with the technical
specifications for a total contract price of Rs. ...........(amount in figures ) (Rs.
..................................................................................... amount in words) within the
period specified in the Invitation for Quotations.

We also confirm that the normal commercial warrantee/guarantee of ...........
months shall apply to the offered goods.
          We hereby certify that we have taken steps to ensure that no person acting for us
          or on our behalf will engage in bribery.



                                                                  Signature of Supplier




                                                                                 Annexure-B

                        Tools and Instruments for Trades to be Upgraded
                                          Package -9

                                                                                          Installa
                                                                                            tion
Sl.No      Brief Description of                                   Delivery     Place of
                                    Specifications   Qty   Unit                           require
   .              Goods                                            Period      Delivery
                                                                                          ment if
                                                                                            any
                                                                                   ITI
                                                                    45 days    Indrana
        Bending spring external
                                                                  from issue      gar,
 1      type, for copper tube                        17    Sets
                                                                   of supply   Agartal
        O.D. 6.4. to 16mm.
                                                                     order         a,
                                                                                tripura
        Pipe cutter miniature for
 2      copper tube 3 to 16 mm                        9    Nos        "           "
        dia.
 3      Pipe wrench 40 cm.                            1    Nos        "           "
 4      Pipe wrench 30 cm.                            1    Nos        "           "
 5      Pipe vice No. 4.                              1    Nos        "           "
        Adjustable pipe die 0-
 6                                                    1    Nos        "           "
        205 cm cap.
        Pipe cutter 6mm to
 7                                                    1    Nos        "           "
        50mm wheel type
        Pipe face to grip pipe up
 8                                                    2    Nos        "           "
        to 50mm
        Pipe stock and dies
        complete with stocks ,
        bushing, bushing holders,
        tap, tap wrenches size
 9      covered                                       1    Set        "           "
        19mm 25mm 32mm
        6mm 9mm 12mm
        19mm 25mm 32mm
        38mm 50mm
        Pipe bender spool type
 12                                                   1    Nos
        with stand manually
     operated
     Adjustable pipe chain
     tongs 22 cm long to take
13                                1    Nos
     pipes from 3 cm to 63
     cm
     Interchangeable ratchet
     socket set with a 12mm
14                                1    Set    "   "
     driver-socket range :
     4mm set of 8.
     Ratchet spanner 6.4 mm
15                                17   Nos    "   "
     sq. reversible.
     Ring spanner, off set 4.7
16                                16   Sets   "   "
     mm to 16 mm
     Ring spanner, offset 19
17                                1    Nos    "   "
     mm to 31.8 mm.
     Flexible-Box spanner size
18                                2    Sets   "   "
     6.4 to 10 mm.
     Spanner 150 mm
19   adjustable 15 degree as      2    Nos    "   "
     cly-burns
     Spanner D.E.W./W
20                                2    Nos    "   "
     standard set
     Spanner whit-worth D>E>
21                                8    Nos    "   "
     6mm. To 25 mm set of.
     Spanner adjustable
22                                8    Nos    "   "
     15cm.
     “Apollo” box spanner set
     in mm 3x 4.
23                                1    Set    "   "
     6x7,9x11,12x14, 15x19,
     22x25, set of 6.
     Spanner monkey up to 5
24                                2    Nos    "   "
     cm
     Adjustable spanner 38
25                                1    Nos
     cm long
     Socket set, reversible
     ratchet, ½ square drive
26                                1    Nos    "   "
     with extension 4.7 to 31.3
     mm
     Socket set, reversible
     ratchet, ½ square drive
27                                1    Set    "   "
     with extension, 3/16” to
     11/4” BSW & S.R.
     Pinch off tool . for
                                       Nos
28   copper tube 6 to 18 mm       17          "   "
                                       ach
     & pinch off pliers.
     Pressure gauge ,
     diameter 63 mm with
29                                17   Nos    "   "
     recalibration set screw,
     scale 0 to 35 kg./sq.cm.
     Compound gauge,
30                                17   Nos    "   "
     diameter 63 mm with
     recalibration set screw,
     scale vaccum 76 mm,
     pressure15 kg/sq. cm.
     Servicemen
     thermometer in metal
31                                                   15   Nos    "   "
     case -30 to + 30 degree
     C.
     Sling psychrometer
     mounter on aluminium
32   back, scale -50 C to + 50                       17   Nos    "   "
     degree portable in
     leather case.
     Gas leak detector for
33                                                   17   Nos    "   "
     halogen gas ( Electronic)
     Lapping plate 250 *
34                                                   17   Nos    "   "
     200mm.
     Punch hole for cutting
35   gasket , 4.7 to 16 mm                           16   Sets   "   "
     dia.
     Scissor, gasket cutting
36   stainless steel, length 250                     17   Nos    "   "
     mm.
                                                          nos
     Centre punch length 100
37                                                   17   eac    "   "
     mm
                                                           h
     Punch centre 150 mm x 9
38                                                   12   Nos    "   "
     mm
39   Punch center 10 cm .                            17   Nos    "   "
40   Dot slot punch.                                 17   Nos    "   "
41   Punch letter 3 mm set.                           1   Nos    "   "
42   Punch number set 3 mm.                           1   Nos    "   "
     Punch hollow 6mm to 19
43                                                   2    Nos    "   "
     set of 5.
     Punch round 3mm x4mm
44                                                   2    Nos    "   "
     set of 2
45   Prick punch                                     2    Nos    "   "
     L-Allen key set, size 1.5 to
46                                                   16   Sets   "   "
     6.4 mm.
     T-Allen key set, size 5/32”
47                                                   17   Sets   "   "
     & 1/8”
     Allen key                    Black Finish 1.5
                                  mm to 14mm
48                                                   1    Set    "   "
                                  Total 11 pieces
                                  set
                                                          sets
     Pliers long nose, length
49                                                   14   eac    "   "
     200 mm
                                                           h
     Pliers water pump, multi-
50                                                   1    Nos    "   "
     fix length 250 mm.
     Pliers vice grip length 250
51                                                   1    Nos    "   "
     mm
     Pliers combination 15
52                                                    2    Nos    "   "
     cm.
     Knife folded stainless
53                                                    11   sets   "   "
     steel – 6”.
     Knife double bladed
54                                                    16   Nos    "   "
     electrician
     Wrench adjustable
55                                                    17   Sets   "   "
     length 250 mm
                                 * Fast-acting
                                 precision
                                 spanner cum
                                 instrument of
                                 new design, for
                                 tightening of
                                 bolts and nuts to
                                 the required
                                 Torque.
                                 * On reaching
     Torque wrench 300 mm,
                                 the preset load
56   12.7 mm squre drive right                        1    Set    "   "
                                 the torque
     and left hand.              wrench, should
                                 release a loud
                                 "Click" and give
                                 a definite feel in
                                 the hand. * The
                                 Torque Wrench
                                 Automatically
                                 resets itself when
                                 hand pressure is
                                 released
57   Stilson wrenches 20 cm                           2    Nos    "   "
                                 Philips Tip Screw
                                 Driver 100mm
     Philips screw driver-       to 300 mm
58   completer set in leather    Long - 100           17   Nos    "   "
     case.                       mm , 150 mm ,
                                 200 mm , 250
                                 mm & 300 mm
     Screw driver, plastic
                                                           eac
59   handle, 3 mm tip length                          1           "   "
                                                            h
     100 & 150 insulated.
     Instrument screw driver –
60   complete set in leather                          2    Sets   "   "
     case.
61   Screw driver 15 cm.                              16   Nos    "   "
     Oil can pressure type-1
62                                                    17   Nos    "   "
     litre can.
63   Oil Can 0.25 litters.                            2    Nos    "   "
     Tape measuring 2 m
64                                                    16   Nos    "   "
     graduation in mm
65   Hammer plastic 300 gm.                           17   Nos    "   "
     Hammer ball pein 450
66                                                    12   Nos    "   "
     gm
     Hammer, cross pein 115
67                                 16   Nos   "   "
     grams with handle
     Hammer ball pein 0.75
68                                 8    Nos   "   "
     kg with handle
     Hammer ball pein 0. 45
69                                 13   Nos   "   "
     kg. With handle.
     Hammer ball pein 0. 22
70                                 17   Nos   "   "
     kg. With handle.
     Hammer smith 2 kg , with
71                                 2    Nos   "   "
     handle.
     Setting hammer with                no.
72   handle                        2    eac   "   "
                                         h
     Philips Tip Screw Driver
     100mm to 300 mm Long                no
73   Product No :                  2    eac   "   "
     P- 100 mm , 150 mm , 200             h
     mm , 250 mm & 300 mm
     Hack saw tubular metal
74                                 16   Nos   "   "
     frame adjustable
     Hacksaw frame
75                                 9    Nos   "   "
     adjustable 20 – 30 cm.
     Caliper odd leg, spring
76                                 17   Nos   "   "
     joint, length 150 mm
     Caliper outside 15cm
77                                 13   Nos   "   "
     spring.
     Caliper inside 15cm
78                                 9    Nos   "   "
     spring.
     Caliper 15 cm
79                                 14   Nos   "   "
     hermaphrodite
80   Vernier caliper 20 cm.        1    Nos   "   "
     Dial Vernier caliper 0- 130
81   mm LCO .05 mm                 1    Nos
     (Universal types)
     Vernier caliper with
82   thumb block 0-130 mm          1    Nos
     LCO 0.2 mm
     Vernier height gauge
83                                 1    Nos   "   "
     250 mm.
     Vernier height gauge
84                                 1    Nos   "   "
     30cm.
85   Vernier level protractor.     1    Nos   "   "
     Filler gauge 0.05 mm–
86                                 1    Nos   "   "
     1mm.
     Wire gauge metric and
87                                 1    Nos   "   "
     with worth.
88   Gauge, wire imperial          1    Nos   "   "
89   Feeler gauge 10 blades.       1    Set   "   "
90   Screw pitch gauge.            1    Nos   "   "
     Wire gauge , metric
91                                 1    Nos   "   "
     standard.
92    Gauge imperial sheet          1    Nos    "   "
      Puller 3 legged, with
93                                  2    Nos    "   "
      flexible arm 120 mm.
      Puller 2 legged, with
94                                  2    sets   "   "
      flexible arm 300 mm.
95    Pulley puller                 1    Nos    "   "
96    Bearing puller                1    Nos    "   "
      Platform scale, heavy
97                                  1    Nos    "   "
      duty 0 to 50 kg.
      Blow lamp capacity ½
98                                  5    Nos    "   "
      Litre.
99    Lamp blow 0.55 liters.        2    Nos    "   "
      Sprit level precision,
100                                 1    Nos    "   "
      metallic 200 mm.
101   Level sprit 15 cm metal.      1    Nos    "   "
102   Plum weight 200 g.            1    Nos    "   "
      Scribing block, universal,
103                                 2    sets   "   "
      spindle 200 mm.
      Universal scribing block
104                                 2    Nos    "   "
      22cm.
      V-Block with stand, 600
105                                 2    Nos    "   "
      *450 mm.
      Screw thread
      micrometer with
      interchangeable 0.4 –
118                                 1    Nos
      1.75 mm pitch anvils for
      checking metric threads
      60
      Depth micrometer 0-100
119                                 1    Nos
      mm 0.01 mm
      Tap set with matching
120                                 1    sets   "   "
      drills 3 mm to 16 mm size.
      Tap set with matching
121                                 1    Set    "   "
      drills ¼” to 5/8” SAE size.
      Stock and die set set 3
122                                 1    Set    "   "
      mm to 16 mm size.
      Stock & die set ¼ to 5/8”
123                                 1    Set    "   "
      SAE size.
124   Stock and dies conduit        1    Nos    "   "
      Taps and dies complete
125                                 1    Nos    "   "
      set in box B .A .
      Taps and dies complete
126                                 1    Nos    "   "
      set in box B.S.F
      Taps and dies complete
127                                 1    Nos    "   "
      set in box whit worth.
      Taps, dies complete set
128                                 1    Nos    "   "
      in box American.
      Rule wooden 4 fold 60
129                                 16   Nos    "   "
      mm
130   Rule steel 300 mm             15   Nos    "   "
131   Rule steel 15 cm with         17   Nos    "   "
      metric graduations.
132   Rule steel 60 cm.                               4    Nos   "   "
      Scriber 150 mm x 4 mm
133                                                   16   Nos   "   "
      (Knurled centre position)
134   Scriber 15 cm.                                  11   Nos   "   "
135   Pincer 150 mm                                   15   Nos   "   "
136   Plier insulated 150 mm                           6   Nos   "   "
      Plier sude cutting 150
137                                                   4    Nos   "   "
      mm
138   Plier flat nose 100 mm                          3    Nos   "   "
      Plier Gas round nose 100
139                                                   3    Nos   "   "
      mm
140   Plier Gas 150 mm                                 3   Nos   "   "
141   Saw tenon 250 mm                                12   Nos   "   "
142   Gimlet 6 mm                                     16   Nos   "   "
143   Bradawl                                         16   Nos   "   "
      C. Clamps 200 mm, 150
144                                                   2    Nos   "   "
      mm, 100 mm
      Block – Vee pair 7 cm
145                                                   2    Nos   "   "
      and 15 cm with clamps.
      Clamp tool maker 5cm
146                                                   2    Nos   "   "
      and 7.5 cm set of 2.
147   Clamp “C” 5 cm.                                 2    Nos   "   "
148   Clamp “C” 10 cm.                                2    Nos   "   "
149   Melting pot                                     1    Nos   "   "
      Chisel cold flat 12 mm x
150                                                   1    Nos   "   "
      200 mm
      Chisel wood firmer 25
151                                                   4    Nos   "   "
      mm and 6 mm
152   Chisel cold 10                                  17   Nos   "   "
      Chisel cold 9mm cross                                Eac
153                                                   8          "   "
      cut 9mm diamond.                                      h
154   Chisel cold 19mm flat.                          8    Nos   "   "
      Chisel cold 9mm round
155                                                   8    Nos   "   "
      nose.
      Drill hand brace 0 to 100
158                                                   4    Nos   "   "
      mm
      Drill S.s. Twist block 3 mm,
159                                                   4    Nos   "   "
      5 mm, 6 mm set of 3
      Portable hand drill            0 - 6mm
      (Electric )0 to 6mm.           capacity or
                                     higher 2 speed
                                     all purpose
                                     portable
                                     electric drill
160                                                   1    Nos   "   "
                                     machine.
                                     power input :-
                                     550W
                                     No- Load
                                     Speed-
                                     1900rpm
                                  with 3 mm to
                                  12mm ,
                                  Total 13Nos.
                                  H.S.S drill bit
                                  set.

      Drill brace hand to
161                                                 2    Nos   "   "
      12mm.
      Drill twist S/S 1.5 to
162                                                 1    Set   "   "
      12mm. By 0.4mm
      Drill twist S/S 8mm to
163                                                 1    Set   "   "
      15mm by 1/2mm
      Drill twist T/S6mm to 25
164                                                 1    Set   "   "
      mm x 1.5mm.
165   Grease gun                                    1    Nos   "   "
166   Bench grinder motorised                       1    Nos   "   "
167   Rawl plug tool and bit                        2    Set   "   "
      Spring balance 0 to 15
168                                                 2    Set   "   "
      kg. And 0 to 2.5 kg.
169   Spring balance 0-1 kg.                        1    Nos
170   Stop watch                                    2    Nos   "   "
      Tacho-meter or
171   revolution counter with     Digital type      1    Nos   "   "
      stop watch
172   Crimping tool                                 1    Set   "   "
      Divider 150 mm, outside                            Eac
173                                                 3          "   "
      & inside calliper                                   h
174   Divider 15 cm spring.                         17   Nos   "   "
175   Tweezer 100 mm                                3    Nos   "   "
176   Snip straight 150 mm                           2   Nos   "   "
177   Snip bent 150 mm                               2   Nos   "   "
178   Snips straight 25 cm                           2   Nos   "   "
      Snip bent 25 cm                                    nos
179                                                 2    eac   "   "
                                                          h
      Lane, smoothing cutters,
180                                                 4    Nos   "   "
      50 mm
181   File flat 200 mm 2 nd cut                     2    Nos   "   "
      File half round 200 mm
182                                                 4    Nos   "   "
      2nd cut
      File half round 200 mm
183                                                 4    Nos   "   "
      smooth
      File round 200 mm 2nd
184                                                 4    Nos   "   "
      cut
      File round 100 mm 2nd
185                                                 4    Nos   "   "
      cut
186   File flat 150 rough                           4    Nos   "   "
187   File flat 250 mm smooth                       4    Nos   "   "
188   File flat 250 mm rough                        4    Nos   "   "
189   File flat 250 mm bastard                      4    Nos   "   "
      Rasp, half round 200
190                                4    Nos    "   "
      bastard
191   File flat 25 cm smooth.      17   Nos    "   "
      File half round second
192                                17   Nos    "   "
      cut 15cm.
      File warding 15cm
193                                4    Nos    "   "
      smooth.
      File knife edge 15cm
194                                4    Nos    "   "
      smooth.
      File cut saw 15cm
195                                4    Nos    "   "
      smooth.
      File feather edge 15cm
196                                4    Nos    "   "
      smooth.
      File triangular 15cm
197                                2    Nos    "   "
      smooth.
      File round 20 cm second
198                                5    Nos    "   "
      cut.
      File square 25 cm
199                                4    Nos    "   "
      second cut.
      File flat 30 cm second
200                                8    Nos    "   "
      cut.
201   File flat 20cm bastard.      8    Nos    "   "
202   File flat 30 cm bastard.     8    Nos    "   "
      File Swiss type needle set
203                                2    Sets   "   "
      of 12.
      File half round 25cm
204                                8    Nos    "   "
      second cut.
      File half round 25cm
205                                8    Nos    "   "
      bastard.
206   File round 30 cm bastard.    4    Nos    "   "
      File hand 15cm second
207                                8    Nos    "   "
      cut.
208   Card file.                   8    Nos    "   "
209   Vice, table jaw 100 mm       2    Nos
210   Vice hand 50 mm jaw          2    Nos    "   "
211   Square try 10cm blade.       17   Nos    "   "
      Square adjustable 15 cm
212                                2    Nos    "   "
      blade.
      Engineers try square
213                                1    Nos
      (knife and wedge)
      Smith’s square 45 cm x
214                                1    Nos    "   "
      30 cm.
215   Safety goggles.              17   Nos    "   "
      Straight edge 45 cm
216                                2    Nos    "   "
      steel.
      Marking table 91 x91 x
217                                1    Nos    "   "
      122 cm.
      Stone oil 15cm x 5cm x
218                                4    Nos    "   "
      2.5cm.
219   Stone carborandum            2    Nos    "   "
      15cm x 5cm x 5cmx 4cm.
220   Glass magnifying 7cm.      2    Nos    "   "
      Reamer adjustable
221   max.9mm 12m, 19mm-         1    Set    "   "
      set of 3.
      Reamer taper 4mm to 9
222                              1    Nos    "   "
      mm set of 4.
      Reamer parallel 16mm to
223                              1    Nos    "   "
      12 mm set of 5.
224   Scraper flat 15 cm.        8    Nos    "   "
225   Scraper 3 corner 15cm.     8    Nos    "   "
      Scraper half round 15
226                              8    Nos    "   "
      cm.
227   Extractor stud EZY- out.   2    Nos    "   "
228   Set combination 30 cm.     2    Nos    "   "
      Wheel dresser (One for 4
229                              1    Nos    "   "
      units).
      Wing compass 25.4 cm
230                              2    Nos    "   "
      or 30 cm.
231   Tongs round                2    Nos    "   "
232   Tong flat.                 2    Nos    "   "
233   Cold set rodded.           2    Nos    "   "
234   Hot set rodded.            1    Nos    "   "
      Swages top & Bottom 12
                                      Eac
235   mm/ 19 mm/ 25 mm           1           "   "
                                       h
      (pair)
      Flatters (rodded) 55 mm
236                              2    sets   "   "
      squares.
      Fuller top & bottom 6
237                              2    Nos    "   "
      mm,9mm (Pair).
238   Anvil 50 kg.               1    Nos    "   "
239   Anvil Stand.               1    Nos    "   "
240   Shovel                     2    Nos    "   "
241   Trammer                    1    Nos    "   "
242   Racks                      2    Nos    "   "
243   Pocker                     2    Nos    "   "
244   Handle                     2    Nos    "   "
245   Leather apron              2    sets   "   "
246   Stake hatchet              2    Nos    "   "
247   Stake grooving             2    Nos    "   "
      Lathe tools HSS tipped
248                              2    Nos    "   "
      set
      Lathe tools bit 6mm x 75
249                              12   Nos    "   "
      mm
      Lathe tools bit 7mm x 75
250                              12   Nos    "   "
      mm
      Lathe tools bit 9mm x 85
251                              12   Nos    "   "
      mm
      Arm strong type tool bit
252                              2    Nos    "   "
      holder R.H.
      Arm strong type tools bit
253                               2   Nos   "   "
      holder L.H.
      Arm strong type tool bit
254                               2   Nos   "   "
      holder straight
      Comparator stand with
255                               1   Nos   "   "
      dial indicator
256   Scientific Calculator       2   Nos   "   "

								
To top