Make Ball Cakes
Until just a short time ago I'd never heard of cake balls before. It all started when my husband said his
stepsister was "craving cake balls" on her Facebook profile. Cake balls? I consider myself somewhat
informed when it comes to the world of baking so I had to figure out the mystery behind these so-called
edible balls of cake. After doing a little bit of research online I discovered that cake balls are also referred
to as "cupcake pops" or "cake pops". What you call them all depends on their presentation. Either way,
the result is always delicious!
Basically, you bake a cake, crumble it all up, mix the crumbs with frosting, roll into balls, and dip in
chocolate. Sounds delightful doesn't it? That's exactly what I thought. You can eat the balls with your
fingers or create cake pops and put them on lollipop sticks. Once my research was done I found this all
very intriguing and had to try it out for myself.
For my first attempt at making cake balls I decided to try German chocolate cake with coconut/pecan
frosting and chocolate coating. One of the great things I discovered about cake balls is the endless
variations you can try. Think about how many different types of cakes there are. These different
variations of cakes can be combined with all the different types of frostings and coatings. Yum!
1
Gather Your Ingredients
There's basically three things you need to bake cake balls:
1. Cake
2. Frosting
3. Coating
You can make your cake and frosting from scratch or you can use a pre-packaged cake mix and frosting.
As far as the coating goes, you can use any sweetened, meltable chocolate. For my first cake ball
project, I used chocolate bark coating which Kroger carries for $3.79 for 24 oz. (12 bars in the package
are 2 oz. each) I would imagine just about any other grocery store would have something like it. I found it
in the baking aisle hiding out next to the chocolate chips.
You'll need one package of bark coating for each batch of cake balls you want to make. I found for the 30
cake balls I made there was just enough. My first attempt was pretty messy and I probably wasted some
chocolate coating but it all worked out OK. (Update: Now that I have some experience under my belt I've
found that I normally have about two bars left of the bark coating. I usually end up using the last two bars
for decorative drizzle or save them for another project.)
Instead of the bark coating you can also use those little confectionary wafers. The nice thing about those
is that they come in all sorts of different colors. I've seen these at Michael's in the cake decorating aisle.
If you chose to add coloring to your bark coating or wafers be sure to use oil-based coloring or paste.
Coloring that contains water will cause the coating to become crumbly and unworkable.
I also recently made some mint chocolate cake balls using Andes mints for the coating. I ended up using
about 75 mints which is about 3 packages or 1 pound of mints. It's usually cheaper if you can buy them
in bulk. I've purchased them in bulk at Meijer.
2
The Birth of a Cake Ball
Step One: Bake Your Cake
This one is pretty easy. Just bake your cake the way you usually would. You can use just a rectagular
sheet pan because you'll be destroying the cake anyway once its done baking. It's really fun! Let your
cake cool for a while but it should still be slightly warm before you crumble it into the bowl. I think I let
my cake cool for 15-20 minutes. Once your cake is crumbled by hand you can continue the process a
step further by using a hand mixer or food processor to get a finer texture.
Step Two: Add Frosting
Now, mix in your frosting to make a paste. You'll need to add 3/4 to a full can of frosting. It all depends on
what type of cake and frosting you use. I started off with 3/4 of the can and the mixture still looked a little
dry so I added to the rest of the container. If you want your cake balls to be more cakey you'll probably
want to add less frosting. In the words of Martha Stewart your mixture is going to "feel weird." So if those
are your thoughts--don't worry--you're on the right track!
Before you roll out the balls you want the mixture to chill for a while. If you try to roll them out while
warm or at room temperature they will crumble into bits. I put my mixture in the freezer for two hours
only because I was busy and didn't have time to get back to it right away. However, according to the cake
ball experts the mixture only needs to stay in the freezer for 15 minutes. I noticed after rolling out about
half the mixture that it started to get warm again and hard to work with. So I put the rest back in the
freezer for about 15-20 minutes and finished it up.
I used my hands to roll out the balls but I've heard using a melon baller can make things easier. You can
make the balls as small or as big as you like but 1 to 1.5 inches is recommended. I found some of the
larger cake balls where a lot harder to dip in the coating and was wishing I had made some of them
smaller. After rolling them out I placed the balls in a plastic container to keep in the freezer. You can
stack them on top of each other between sheets of waxed paper.
Some websites recommend putting the rolled balls onto cookie sheets but I don't have that much room in
my freezer!
You'll want to freeze the balls for at least 6 hours. This makes it much easier to dip the balls in melted
chocolate. If the balls are too warm when you try to coat them with chocolate you'll have a big mess on
your hands!
Step Three: Coat With Chocolate
Once your balls are nice and chilled you're ready to dip them in chocolate. I used the microwave to melt
my bark coating but you can also a saucepan or double boiler. Here's melting directions from the back of
the bag:
Double boiler: Heat water in bottom of double boiler to boiling. Remove from heat and add coating in top
of double boiler. Stir until melted.
Saucepan: Melt candy coating in heavy saucepan at very low temperatures, stirring constantly until
smooth.
Microwave: Place candy coating in microwave safe dish. Microwave for one minute at full power, then stir
3
thoroughly. Continue microwaving on high for 15 seconds intervals, stirring well after each interval, until
smooth.
Helpful Hints: Chop or break up coating to speed melting times. Melt at lowest temperature possible to
produce the smoothest final product. Overheating will cause bark coating to scorch. Use only dry
utensils or cooking pans because moisture will causing coating to seperate, solidify or granulate.
Some More Helpful Hints
Coating the balls in chocolate was the hardest part for me. I'm somewhat of a perfectionist and I had a
hard time trying to figure out how to cover the entire ball with a smooth coating. Some baking websites
recommend manipulating the balls with a toothpick or fork while others recommended using a spoon. I
made a huge mess with the spoon and ended up using toothpicks. I would stab a ball with the toothpick,
roll it around in the melted chocolate and twist it around to get most of the excess chocolate to drip off.
Then I had to figure out how to get the ball off my toothpick and onto my sheet of waxed paper without
messing it up. While I was trying to figure this out I noticed that the chocolate set and dried very quickly.
I could just pull it off with my fingers.
(Update: I've found the easiest way to coat your cake balls is with a fork and spatula. Hold the fork in one
hand and the spatula in the other hand. Drop the cake ball in the coating and make sure all surfaces get
covered using the fork and spatula. Lift the cake ball up out of the coating with your fork and let the
excess coating drip off while you tap the fork on the edge of the bowl. Gently let the cake ball roll off the
fork onto a piece of waxed paper. If you have a plastic fork, break off the two center tines and this will
make it even easier for you. For less than the cost of a nickel you've just created a dipping-fork much like
those the professional candy-makers and chocolatiers use.)
It's best to only work with a few balls at a time and leave the rest in the freezer. Once the balls warm up
they become much harder to work with. The chocolate coating also becomes harder to work with once it
begins to cool off so you have to find a happy medium. It's best to only melt 2-3 of the chocolate cubes at
a time. I think next time I might try using the saucepan instead of the microwave because I think it will be
easier to keep the chocolate at a good temperature.
After your balls are rolled in chocolate you're pretty much done unless you want to get fancy and add
more decorations or sprinkles. If you want to add sprinkles you'll have to work pretty quickly and
decorate one ball at a time because the chocolate hardens very fast. I placed the finished balls on a sheet
of waxed paper while I worked on the others. Cake balls can be stored at room temperature or in the
refrigerator. Chances are you won't have to worry too much about long-term storage because they'll be
gobbled up right away!
Note: if you store your cake balls in the refrigerator they might get sweaty. This usually isn't a huge
problem taste-wise but can make them look a little strange--especially if they've been decorated.
Funfetti Cake Balls
After my original adventure with german chocolate cake balls I decided to give Funfetti cake balls a try.
The result was equally delicious! This time around I used Funfetti cake mix with vanilla frosting (the
Funfetti variety that come with the package of sprinkles on top) and white almond bark. While the coating
was setting I also dipped them in rainbow sprinkles for some extra "flair. Instead of dipping them in
sprinkles you can also just "sprinkle" the sprinkles onto the cake balls.
One thing I learned with the Funfetti cake is that after you bake the cake and mix in the frosting the
colored bits seem to fade quite a bit. So what I did was mix the sprinkles that came with the frosting into
4
the mixture. It seemed to work out pretty well. When you bite into the cake ball you still get to see some
of the bright candies. I also learned that you need to buy A LOT of sprinkles if you want to make your
cake balls look pretty. I bought a small container and only had enough for half the batch. Oops! Oh well.
No one that ate them seemed to complain!
How to Decorate Your Cake Balls
I didn't decorate my cake balls the first time around but this is something you might want to consider
since it's really not that difficult. There are all kinds of different ways to decorate your cake balls. When I
make Funfetti cake balls I like to decorate them with different colored sprinkles. An important thing to
remember when decorating your cake balls with any type of sprinkle is that you need to add the sprinkles
BEFORE the outer coating has set and dried. Otherwise, the sprinkles will just slide off and that's no fun
at all. :-( You can also dunk your cake balls into a bed of sprinkles for more coverage but that can get
pretty messy. I prefer to just sprinkle on the sprinkles. :-)
One embellishment that can make your cake balls look fancy is to drizzle on a contrasting color of
coating using either a squeeze bottle filled with melted coating or a spoon or fork dipped in the coating.
You can also pipe different designs onto your cake balls using a variety of cake decorating tips. Some
people also go so far as to decorate their cake balls with pieces of fondant to make them resemble
different creatures and characters. I've even seen some cake balls decorated to look like little football
helmets! Clever!
If you have a golf fan in your family you can make some cake balls with white coating and then purchase
some round paper candy cups. Using Wilton tip #233and some green frosting, pipe some grass around
the edge of the candy cup and then place a cake ball inside the cup. Cute!
Really, the possibilities are endless when it comes to decorating cake balls and you're only limited by
your imagination.
5