Docstoc

1 To All NACPA Members From Larry Whitt_ Coordinator Subject

Document Sample
1 To All NACPA Members From Larry Whitt_ Coordinator Subject Powered By Docstoc
					To: All NACPA Members

From: Larry Whitt, Coordinator

Subject: Award of Turf and Grounds Equipment                (NACPA BID # 41018)

Date: 12-6-04

This is to inform you that the evaluation by the Evaluation Committee for the turf and
grounds bids have been completed and the recommendation to award to various
vendors meeting or exceeding all specifications has been approved

The Invitation to Bid, Quoted prices, and the Name/Model number are attached or you
may use NACPA’s website www.nacpassociation.org to view.

I did not list all the part numbers required for assembly but if you need them, they are in
file and if you need brochures on any piece of equipment, please call the appropriate
vendor listed below.

If you have questions, please call me @256-509-7950.




Contacts for the Vendors:

TIECO----------------- Birmingham------ Jerry Simons ------ 1-800-336-3494       Cell Phone 1-
205-533-5084
Jerry Pate Turf-------- Pelham ------------ Scott Herrin------- 1-800-348-9015   Cell Phone 1-
205-368-9795
Maynard Equipment- Brownsboro-------Gordon Maynard---256-776-9435
Huntsville Tractor----Huntsville----------David Ficken-------256-837-6767




                                                1
DATE ISSUED: October 1, 2004                    INVITATION TO BID NUMBER: 41018

The Cooperative will accept sealed bids for the following:

      TURF/GROUNDS EQUIPMENT

Bids must be received before 2:00P.M, October 21, 2004

Return sealed Bids to:
                    Hand Delivered:                    Mail:
                    NACPA                              NACPA
                    115 Washington St.                 115 Washington St.
                    Huntsville, AL 35801               Huntsville, AL 35801


I/We agree to furnish at the prices shown and guarantee that each offered will meet or
exceed all specifications, terms and conditions, and requirements listed. I herein affirm
I have not been in any agreement or collusion among bidders in restraint of freedom of
competition by agreement to bid at a fixed price or to refrain from bidding or otherwise.
I have read and understand all terms and conditions of this bid.


_________________________________               ______________________________
Company Name                                    Authorized Signature

_________________________________               ______________________________
Mailing Address                                 Typed Authorized Name

_________________________________               ______________________________
City, State, Zip                                Title

_________________________________               ______________________________
Telephone                                                  Fax




                                            2
                                         NACPA
                                      Larry R. Whitt
                                       Coordinator
                                  115 Washington Street
                                   Huntsville, AL 35801

                                  Phone: (256) 509-7950
                                   FAX: (256) 533-3442


The North Alabama Cooperative Purchasing Association, hereinafter referred to as the
"Cooperative," was established to consolidate the procurement of equipment and supplies in
order to obtain volume discounts for all agencies in the Cooperative.

The "host" agency for the "Cooperative" will be the “Top of Alabama Regional Council of
Governments” (TARCOG) located at: 115 Washington St., SE, Suite A, Huntsville, AL 35801-
4883.

Each participating member of the “Cooperative” will furnish to the Coordinator of the
Cooperative his or her quantities of equipment/supplies needed. Needs of all members will be
combined and submitted under one bid/proposal.

The award of all bids will be made by the Coordinator/Executive Director and at minimum, three
(3) other Cooperative Members in accordance to the provisions set forth in the
Intergovernmental Agreement.

Each member of the "Cooperative" will be responsible for the issuing of its own Purchase
Orders, delivery instructions, invoicing, insurance requirements and the issue of its own tax
exemption certificates as required by vendor.

The members of the "Cooperative" at present are as follows:

Alabama A&M Community Development                        City of Athens
Decatur Housing Authority                                City of Priceville
City of Decatur                                          Dekalb County Commission
City of Madison                                          Huntsville Housing Authority
City of Athens School System                             Athens Utilities
City of Decatur School System                            City of Madison Water and
City of Madison School System                               Wastewater Board
Limestone County Commission


It is anticipated that the following local government agencies within North Alabama may
participate in the “Cooperative” as a member and that vendors must agree to provide any
additional member listed below the same prices as quoted in any existing “Cooperative”
contract.

City of:                    Town of:                             School System of:
Albertville                 Ardmore                              City of Albertville
Arab                        Bridgeport                           City of Arab
Boaz                        Courtland                            City of Boaz
Cullman                     Elkmont                              City of Florence
                                              3
Florence                     Falkville                           City of Ft. Payne
Ft. Payne                    Gurley                              City of Gadsden
Gadsden                      Hillsboro                           City of Guntersville
Guntersville                 New Hope                            City of Hartselle
Hartselle                    Lexington                           City of Russellville
Huntsville                   Owens Cross Road                    City of Huntsville
Moulton                      Rogersville                         City of Moulton
Muscle Shoals                Stevenson                           City of Muscle Shoals
Scottsboro                   Triana                              City of Sheffield
Sheffield                    Trinity                             City of Tuscumbia
Tuscumbia                    Woodville                           Colbert County
                                                                 Dekalb County
County Commissions:          Colleges/University:                Jackson County
Colbert                      Alabama A&M                         Lauderdale County
Cullman                      Calhoun Community                   Lawrence County
Etowah                       Drake Technical                     Madison County
Jackson                      N. E. Rainsville                    Marshall County
Madison                      N. E. Muscle Shoals                 Morgan County
Marshall                     Lauderdale                          Snead State
Morgan                       UAH                                 Cullman County
Franklin                     UNA                                 Limestone County
                             Snead State                         Winston County
                             Wallace State                       Athens

Other:

Huntsville/Madison County Airport Authority
NACOLG
NARCOG
Space and Rocket Center
Von Braun Center
Housing Authorities of the above Counties and Cities Listed.
Volunteer Fire Departments of the above Cities and Counties
Health Departments of the above Counties
Huntsville-Madison County Public Library
Water-Electric-Sewer Boards/Utilities of the above Cities/Counties/Towns




                                              4
                        STANDARD TERMS AND CONDITIONS

IN ORDER TO SUBMIT A RESPONSIVE BID, IT IS VERY IMPORTANT THAT ALL
TERMS AND CONDITIONS, SPECIFICATIONS AND INSTRUCTIONS ARE READ
THOROUGHLY.

Bid response envelopes must be properly identified on the front with the invitation to bid
number, opening date and time. Each individual invitation to bid must be submitted in a
separate sealed envelope.        Multiple bid responses submitted in the same
envelope/courier package (that are not in separate envelopes properly identified) will be
rejected. The Cooperative does not assume responsibility for late bid responses that
occur due to the U.S. Postal Service or private courier service. Sufficient lead-time
should be allowed to reach NACPA prior to the “received date and time” indicated on
the invitation to bid.

Bid responses and signature page must be submitted on this form in ink or typewritten
or the bid will be rejected.

For a “no-bid” response, return the signature page signed and marked “no bid.” It is
required that a “no-bid” response be identified on the envelope as if it were a bid.

Bidder will be removed from active bidders list after three (3) consecutive no-responses.

The attached specifications are being provided to potential bidders as guidelines that
describe the type and quality of equipment, supply, and/or service the Cooperative is
seeking to purchase. The bidder must indicate compliance or list exceptions to each
specification item for consideration. Failure to comply with this provision could be cause
for rejection of the bid.

Bid responses must be received by the Cooperative prior to the date and time specified.
Late responses cannot be accepted.

The Cooperative will not accept facsimile transmissions of bids.

Changes or modifications of this Invitation to Bid are allowed only by written authority of
the Coordinator.

Non Appropriation of Funds: Continuation of any agreement between members of the
Cooperative and a bidder beyond a fiscal year is contingent upon continued legislative
appropriation of funds for the purpose of this bid and any resulting agreement. Non
availability of funds at any time shall cause any agreement to become void and
unenforceable and no liquidated damages shall accrue to the Cooperative member as a
result.

Descriptive Literature: Reference to brand names and numbers is not restrictive, unless
otherwise specified. Bids on equivalent items meeting the standards of quality indicated

                                            1
STANDARD TERMS AND CONDITIONS (continued)

 will be considered, providing the bid clearly describes the item offered and indicates
how it differs from the referenced brands. Descriptive literature on any supplemental
information necessary for comparison purposes should be submitted with the bid or the
bid for that item may be rejected.

The Cooperative reserves the right to reject all or any portion of this Invitation to Bid
when the best interest of the Cooperative are involved.

The Members of the Cooperative is exempt from all Federal, sales and use taxes.

All bidders must furnish a Bid Bond on any bid of $10,000 or more. A Bid Bond must be
in the form of a Cashiers Check or a Bid Bond in the amount of $500.00.

All bidders shall maintain such insurance as will protect bidder and the Cooperative
from claims under Workman’s Compensation Acts and from claims for damage and or
personal injury, including death, which may arise from the operation and/or fulfillment of
the resulting contract of this Invitation to Bid. Insurance shall be written by companies
authorized to do business in the state of Alabama. Evidence of insurance shall be
furnished to the Cooperative no later than ten days after award of this bid.

A member of the Cooperative reserves the right to terminate any contract resulting from
this bid for just and reasonable cause whereby it appears to be in the best interest of
the member.

The successful bidder agrees by, The submittal of a response to this bid, to defend,
indemnify, and hold the Cooperative harmless from any and all causes of action or
claims of damages arising out of or related to bidder’s performance under this contract.

A BID RESPONSE WILL BE REJECTED IF:

•   Invitation to bid number not on face of envelope
•   Received too late / no bid / no bid bond
•   Multiple bids in same envelope not submitted or identified properly
•   Bid response not on original form
•   Bid not signed or not original signature
•   Requested information not submitted with bid
•   Failure to acknowledge receipt of addendum with bid




                                            2
STANDARD TERMS AND CONDITIONS (continued)

•   Delivery can be made ____________ days or _____________ weeks after receipt of
    order.

•   Terms: __________________ (Discounts will be considered in the bid evaluation
    and will be taken without regard to date of payment.)

•   Prices valid for acceptance within __________ days (not to be less than 30 days)


NOTE: FOR THIS BID TO BE CONSIDERED RESPONSIVE, ALL INFORMATION
REQUESTED SHOULD BE SUPPLIED, AS APPROPRIATE OR THE ENTIRE BID
MAY BE DISQUALIFIED. BID RESPONSE MUST BE IN INK OR TYPED WITH THE
ORIGINAL SIGNATURE INCLUDED.



_____________________________________                 _____________________
Bidder Signature                                      Company




                                           3
SPECIAL TERMS & CONDITIONS

Contract shall be for three (3) years.

Prices quoted are to be valid for one (1) year.

NACPA will accept an escalation after the first year of the contract period if notified in
writing by the vendor’s manufacturer. During the term of this contract, vendor shall pass
along to NACPA members, any additional rebates or incentives offered by
vendor/manufacturer. Vendor shall be a certified authorized dealer and maintain an
Authorized Service Center within 100 miles of Decatur, AL.

No estimates can be made as to how many orders will be placed by members of the
Cooperative but indications are that all agencies will participate if pricing is deemed to
same tax dollars.




_____________________                                    ____________________
Signature                                                Vendor

_____________________
Title




                                             4
                                                                                     ONE

                                                                                     Price: $4,750.00
                                                                                     Maynard Equipment

                              SPECIFICATIONS FOR A
                                  15 HP WALKING
                                 ROTARY MOWER


     •   Please circle YES if you meet or exceed this specification.
     •   Please circle NO if you do not meet this specification.
     •   Failure to YES or NO could disqualify your bid.

1.   ENGINE                                               YES               NO

     Horsepower…………………………………………………………………………………….………………………………………………………………15
     No. of cylinders………………………………………………………………………………………………………………………………………………..2
     Displacement…….……………………………………………………………………………………………………………………………..30.1 cu in.
     Compression ratio…………………………………………………………………………………………………………………………..…………8.5:1
     Max. Torque….…………………………………………………………………………………………………………….27.3 ft lbs @ 2400 RPM
     Starter…………………………………………………………………………….12-volt (.8 kw), solenoid shift positive engagement
     Ignition……………………………………………………………………………………………………………………………………………..…….electric
     Charging system……………………………………………………………………………………………………………………..12-volt, 15-amp
     Fuel……………………………………………………………………………………………………………………………………….unleaded gasoline
     Fuel filter………………………………………………………………………………………………………………replaceable automotive type
     Cooling…………………………………………………………………………………………………………………………air-cooled, fly-wheel fan
     Governor………………………………………………………………………………………………………………………………..…………mechanical


2.   TRACTION DRIVE SYSTEM                                YES               NO

     Type………….Dual hydrostatic; individual pumps power two direct-drive wheel motors; hydrostatic system
     operates on 10W40
     Pumps…..…..Hydrogear BDP10 Two variable displacement, axial piston type; each pump powers on drive-
     wheel motor
     Pump Drive…………………………………………………………………………………………….V-belt drive from engine crankshaft
     Final Drive………………………..….Ross MB 12 direct-drive high-torque wheel motors; one for each drive wheel
     Filter………………………………………………………………………………………………………..40 micron, replaceable spin-on type
     Ground Speed…..There are two speed settings on the H-Bar steering. Walking: 0 – 5 mph (0 – 8 kph)
     Forward and 0 – 3 mph (0 – 4.9 kph) reverse, infinitely variable. Riding: (towing after-market trailers)
     0 – 8 mph (0 – 12.9 kph) forward and 0 – 4 mph ( 0 – 6.4 kph) reverse, infinitely variable
     Steering………………..Self-centering H-Bar (Hustler Bar) steering provides independent control of each drive
     wheel; Speed, forward, reverse, brake and turns are all controlled with the easy to learn, easy to operate
     H-Bar steering
     Turning Radius…………...True zero degree; turns within its own length; counter-rotating, independent drive
     wheels


3.   BRAKES                                      YES               NO

     Service……………………………………………………………………………………………………………….Hydrostatic dynamic braking
     Brake…………………………………………………………………………………………………………………………………..…….Parking brake
     Mower Drive……………………………………………………………………………………………………..Ogura electromagnetic clutch


4.   TIRES                                                YES               NO


                                                     5
      Front……..………………………………………………………………………………………………………………………….11 x 4 – 5, rib tread
      Drive…………………………………………………………………………………………………………………………18 x 8.00 – 10, turf tread


5.    CAPACITIES                                           YES               NO

      Fuel system………………………………………………………………………………………………………………………………………...5 US Gal
      Hydraulic Oil…………………………………………………………………………………………………………………………………….3.9 US Qts


6.    DIMENSIONS                                           YES               NO

      Height………………………………………………………………………………………………………………………………………39 in (153.8 cm)
      Length (with 48” deck)………………………………………………………………………………………………………77 in (305.335 cm)
      Overall width……………………………………………………………………………….61 in (244.3 cm) with 48” deck chute down
      Tire-To-Tire Width…………………………………………………………………………………………………….………..43.5 in (171.4 cm)
      Weight…………………………………………………………………………………………………………………….……………650 lbs (294.8 kg)


7.    SAFETY                                               YES               NO

      Safety features……Operator presence safety interlock system; side discharge deck with oversize discharge
      chute
      Construction…………….….Mainframe is reinforced 3/16” welded steel construction; drive motors mounted to
      doubled 3/16” welded steel
      Controls………………………………………………..Hand-operated choke/throttle, ignition switch, mower clutch switch
      Indicators…………………………………………………………………………………………………………………………………………Hour meter


8.    48” SIDE DISCHARGE DECK                              YES               NO

      Type…..Free-floating side-discharge mower using three blades with center blade to the front (48’ deck
      uses two blades). Mower is suspended at the corners by four height adjustment pins. Includes deck-
      mounted anti-scalp rollers to improve flotation in rolling and uneven terrain.
      Construction……….3/16 welded steel; solid 1 in x 3/8 in steel bars reinforce impact areas on trim edges.
      3/16 in x 3/8 in box-section reinforced front edge; Spindle mount areas reinforce with 1/8 in formed steel;
      Steel deck housing is 5 in deep to provide room for high-capacity mowing
      Discharge………………………………………………………………………………………………………………………………………………...Side
      Cutting Heights………Pin type adjustments at four corners of deck in .25 in increments from 1 in to 4 in (.1
      cm increments, 3.94 cm to 15,76 cm).
      Main Blades…………………..….Heavy-duty, heat-treated, 10B38 high-lift steel blades 19 in x 2.75 in x .197 in
      Blade Tip Speed……………………………………………………………………………………………………………………48 in.; 16250 FPM
      Blade Drive………………………………………………..……..V-belt drive to all three spindles; spring tension idler pulley
      Spindles……………..Machine ductile housing, 1 in (2.5 cm) diameter high carbon steel shafts and sealed ball
      bearings; machine ductiles iron blade saddle with trash guard
      Weight………………………………………………………………………………………………………………………………….242 lbs (109.8 kg)
      Width of Cut……………………………………………………………………………………………………………………………………….………48 in
      Configurations……………………………………………………………………………………………………………………48” SD deck, 15 HP


9.    ACCESSORIES                                          YES               NO

      Sulky………….……………Due to safety considerations, stand-up sulky must be TrimmerTrap bullrider 2x2 only
      Park Brake
      Weight Kit
      Water Bottle & Holder


10.   MINIMUM 4 HOURS ON-SITE TRAINING                     YES               NO


11.   WARRANTY

      2 year limited warranty on tractor. Free pick-up and delivery to Authorized Service Center for warranty
      work performed for 2 years.


                                                      6
Name and Model Number: Hustler-Hydro 925651


List all part numbers required for complete assembly:


Please list items you do not meet specifications on and give complete details of what you are offering.




                                                         7
                                                                                     TWO

                                                                                     Price: $7,400.00
                                                                                     Maynard Equipment

                        SPECIFICATIONS FOR A
                         RIDING, ZERO TURN
                    RADIUS MOWER 60” Deck, 25 hp AC

     •   Please circle YES if you meet or exceed this specification.
     •   Please circle NO if you do not meet this specification.
     •   Failure to YES or NO could disqualify your bid.

1.   ENGINE                                      YES               NO

     Horsepower………………………………………………………………………………………………………………………………………….……25 hp
     No. of Cylinders………………………………………………………………………………………………………………………………………..………2
     Displacement………….…………………………………………………………………………………………………………..41.2 cu in (675 cc)
     Compression Ratio……………………………………………………………………………………………………………………………….……8.1:1
     Max. Torque…………………………………………………………………………………………………………………41.0 ft lbs @ 2400 RPM
     Starter……………………..…………………………………………………….12-volt (.8 KW), solenoid shift positive engagement
     Ignition………………………………………………………………………………………………………………………………………….……Electronic
     Charging System……………………………………………………………………………………………………………………..12-volt, 15-amp
     Fuel……………………………………………………………………………….Unleaded gasoline with octane rating of 87 or higher
     Fuel Filter……………………………………………………………………………………………….……………Replaceable automotive-type
     Cooling…………………………………………………………………………………………………………………….….Air-cooled, fly-wheel fan
     Governor…………………………………………………………………………………………………………………………………..………Mechanical


2.   TRACTION DRIVE SYSTEM                       YES               NO

     Type……..…….Dual hydrostatic; individual pumps power two direct-drive wheel motors; hydrostatic system
     operates on 10W40 motor oil
     Pumps….….Hydrogear BDP21; Two variable displacement, axial piston type; each pump powers one drive-
     wheel motor
     Pump Drive………………………………………………………………………………….…………..V-belt drive from engine crankshaft
     Final Drive………………….……….Direct-drive high torque wheel motors; one of each drive wheel; White CE 18
     Filter………………………………………………………………………………………………………………….………..25 micron, spin-on type
     Ground Speed………..………….……Infinitely variable: 0 – 15 mph (0 – 22.53 kph) forward; 0 – 7.5 mph (0 –
     12.07 kph) reverse
     Steering……………..Twin lever steering provides independent control of each drive wheel; speed, forward,
     reverse, brake and turns are all controlled with hand-operated controls
     Turning Radius………….…True zero degree; turns within its own length; counter-rotating, independent drive
     wheels


3.   BRAKES                             YES               NO

     Service………..……………………………………………………………………………………………………….Hydrostatic dynamic braking
     Parking……....Automotive-style drum brakes: When steering levers are placed in neutral position, integral
     park brakes are automatically engaged
     Mower Drive…..…Single V-belt drive from engine with electric clutch; spring tension idler for extended belt
     life


4.   TIRES                                       YES               NO

     Front……………………………………………………………………………………………………………………….……13 x 6.50 – 6, rib tread

                                                     8
      Rear……..…………………………………………………………………………………………………………………24 x 12.00 – 12, turf tread




5.    CAPACITIES                                   YES                NO

      Fuel System……………………………………………………………………………………………………………..…….12.2 US Gal (46.18 L)
      Hydraulic Oil………………………………………………………………………………………………………………..…………2 US Gal (7.57 L)


6.    DIMENSIONS                                   YES                NO

      Height………………………………………………………………………………………………………………………………..…………39 in (99 cm)
      Length (with 60” deck)..…………………………………………………………………………………………………………79 in (200.7 cm)
      Overall Width…………………………………………….. (with 60” deck and discharge chute) up to 70.5 in (179.07 cm)
      Tire-to-Tire Width……………………………………………………………………………………………………………..….59 in (149.86 cm)
      Weight………………………………………………………………………………………………………………….…………1230 lbs. (557.91 kg)


7.    SAFETY FEATURES                              YES                NO

      Operator presence system connected to deck and drive clutches; stabilizer rollers at rear of tractor
      Seat…………………………………………………..Molded-vinyl, suspension seat with armrests; fore and aft adjustment
      Construction…………………Mainframe is 1.5 in x 3 in x .187 in (3.8 cm x 7.62 cm x .47 cm) rectangular steel
      tubing; drive motors mounted to .170 in (.45 cm) welded steel; front caster wheels mounted with roller
      bearings on each wheel; front caster forks are .5 in (1.27 cm) steel
      Deck Lift…………………………..Foot-operated deck height adjustment; pin for setting height, transport position
      Controls…...Hand-operated choke/throttle, ignition switch, electric mower clutch; integrated parking brake
      Indicators……………………………………………………………………………………………………..Hour meter, engine warning light
      Cup Holder………………….…………………………………………………..Two cup holders molded into the left side fuel tank


8.    60” SIDE DISCHARGE DECK                      YES                NO

      Type…..Free-floating mower using three blades with center blade to the front; mower is suspended at the
      corners; includes 6 deck-mounted rollers to improve flotation in rolling and uneven terrain
      Deck Lift…….….Raise and lower deck from driver’s seat with simple foot-operated deck height adjustment;
      pin for setting height, transport position; change cutting heights, hop curbs and trailer more easily
      Construction….… .125 in (.317 cm) welded steel; solid 1 in x .375 (2.55 cm x .95 cm) steel bars reinforce
      impact areas on trim edges; .187 in x .375 (.47 cm x .95 cm) in box-section reinforced front edge;
      reinforcements welded onto spindle mount areas; steel deck housing is 5 in (12.7 cm) deep to provide
      room for high-capacity mowing
      Cutting Heights.….Foot-operated deck height adjustment; pin for setting height, transport position; height
      adjustment is .25 in increments from 1 to 5 in (2.55 cm to 12.7 cm)
      Mowing Blades……………………………..…Heavy-duty, heat-treated, high-lift steel blades 24 in x 3.00 in x .25 in
      Blade Tip Speed……………………………………………………………………………………………………………………60 in: 18,800 fpm
      Blade Drive……………………………………..…………………V-belt drive to all three spindles; spring tension idler pulley
      Spindles..............Machine ductile housing, 1 in (2.5 cm) diameter high carbon steel shafts and sealed ball
      Bearings
      Flotation…………..Suspended mower floats on four spring-assisted chains; 6 anti-scalp wheels are standard
      Width of Cut………………………………………………………………………………………………………………………………………………….60”
      Trim Capacity………………………………………………………………………………………………………………………………………………….6”



9.    MULCHING KIT                                 YES                NO

10.   WARRANTY


      Lifetime on tractor frame and leading edge of deck, hoses and fittings; 3 years on blade spindles; 2 years
      on entire unit except tires and battery.
      Free pick-up and delivery to Authorized Service Center for warranty work performed for two years.



                                                       9
Name and Model Number: Super-Z-Hustler #926980


List all part numbers required for complete assembly:



Please list items you do not meet specifications on and give complete details of what you are offering.




                                                         10
                                                                                                                     THREE

                                                                                                                     Price: $19,936.00
                                                                                                                            TIECO
                                          SPECIFICATIONS FOR A
                                 5-GANG TOW-BEHIND REEL MOWER/RAM LIFT

                              •     Please circle YES if you meet or exceed this specification
                              •     Please circle NO if you do not meet this specification
                              •     Failure to circle YES or NO could disqualify your bid



1. FRAME                                                   YES           NO

  Cutting Width .......................................................................................... 5 -Gang: 10’10” (3.3 m)
  Cutting Capacity ......... Up to 9.8 acres (3.92 hectares)/hour with ground speed of 5.5 mph (8.85 km/h);
  up to 70 acres/day practical
  Transport Width ........................................................................................................... 95” (2.4 m)
  Length ...................................................................................................................... 161” (4.1 m)
  Height/Transport ...................................................................................................... 60.5” (1.54 m)
  Frame Construction ........................... Channel and tube structural steel, electrically welded construction
  Carrier Wheels ........................................................ SAE 6 bolt 16 x 8 LB wheel, 11L-15, 6-ply rib tires
  Frame Hitch ........................................................... Draw bar pin/clevis hitch, adjustable to 5 positions
  Weight (approx.)
  Transport Frame (shipping): ........................................................................... 1492 lbs (678 kg)
  Weight With Mowers......................................................................................... 2,600 lbs. (1182 kg)



2. DRAWBAR WEIGHT:                                         YES          NO

  5-Gang
  Transport .......................................................................................................... 120 lbs. (55kg)
  Mowing ......................................................................................................... 290 lbs. (132 kg)
  Drawbar Jack: ........................................ 15” (381 mm) stroke, top screw type; stores on side of frame
  Hydraulic Lift ...............................................Open center, directional control valves, internal relief valve
  Choice Of: ...................................................................................... Direct tractor hydraulics controls
  Recommended Minimum ............................................................................................... 30 hp (PTO)
  Tractor Requirements ........................................................................................ 3000 lbs. (1361 kg)
  Cutting Units .......................................................................................................... 6-blade Fairway
  Wheels ................................................................................................................ 18” steel wheels



3. MANUFACTURER                                            YES         NO

  Frame and Reels must be of the same manufacturer.



4. WARRANTY
   Please state all warranties




  Name and Model Number: Jacobsen #74670



                                                                            11
List all part numbers required for complete assembly.


Please list items you do not meet specifications on and give complete details of what you are
offering.




                                               12
                                                                                                                   FOUR

                                                                                                                   Price: $17,636.00
                                                                                                                          TIECO

                                             SPECIFICATIONS FOR A
                                        3-GANG, 72” CUT GAS REEL MOWER

                            •     Please circle YES if you meet or exceed this specification
                            •     Please circle NO if you do not meet this specification
                            •     Failure to circle YES or NO could disqualify your bid


1. ENGINE                                                YES                    NO

 Engine ……………………………………………………………... Briggs & Stratton® Vanguard™ V-twin, 4-cycle, 2-cylinder, OHV
 Horsepower (@ 3,600 rpm) ...............................................................................................18 hp (13.4 kW)
 Displacement………………………………………………………………………………………………………...................... 34.8 cu. in. (570 cc)
 Air Cleaner …………………………………………………………………………………………………………............... Replaceable dual element
 Cooling ................................................................................................................................... Air-cooled
 Lubrication ..................................................................................................................... Fully pressurized
 Oil Filter ………………………………………………………………………………………………………….................. Replaceable, spin-on type
 Electrical System............................................................ 12-volt Bendix starter; 16-amp alternator; key start


2. VEHICLE                                               YES                    NO

  Tires……………………………………………….Front - Two 20 x 10-10, 2-ply, tubeless; Rear - One 20 x 10-8, 2-ply, tubeless
  Service Brake ……………………………………………………………......................... Dynamic braking through hydrostatic drive
  Parking Brake .............................................................................. Disc type on front wheels; hand-operated
  Mowing Speed ………………………………………………………………………………………………………….......... 0 to 5 mph (0 to 8 km/h)
  Transport Speed .......................................................................................... 0 to 8.5 mph (0 to 13.7 km/h)
  Reverse Speed ...............................................................................................0 to 2.3 mph (0 to 3.7 km/h)
 Traction Drive………………………..Direct-coupled hydrostatic transmission with high-torque wheel motors; “automatic”
  three-wheel drive with mower switch engaged
  Reel Drive ..........................Fixed-displacement, three-section gear pump and three bi-directional gear motors
  connected in parallel; hydraulic, variable-speed backlapping standard
  Reel Lift............................................ Single-pedal control; single hydraulic cylinder with automatic reel shutoff
  Operator Controls ………………………….Foot-operated traction pedal, foot-operated reel lift/lower pedal, handthrottle,
  ignition switch, engine glow-plug switch (diesel), choke control (gas), mower/three-wheel-drive switch, parking
  brake, seat adjustment
  Gauges/Indicators……….……………………….Engine coolant temperature (diesel), voltmeter, hour meter, enginelow oil
  warning light, air filter restriction (diesel)
  Fuel Capacity ...................................................................................................................... 6.5 gal. (25 l)
  Seat ...................................................................................... High-back; front-to-rear adjustment standard
  Steering ...................................................................................................... Hydrostatic power; rear wheel
  Hydraulic System ........................................................... 5.5 gal (21 l) capacity; 10-micron, full-flow filtration


3. MOWERS                                                YES                    NO

 Reel Number and Size
 Three 26 in. (0.66 m)
 Number of Blades ..................................................................................................................................7
 Blade Material .................................................................................Hardened, high-manganese carbon steel
 Cutting Frequency…………………………………………………………………………………….….7-blade - 0.15 in./mph (2.38 mm/km/h)
 Overall Cutting Width ……………………………………………………………………………………………………………………………72 in. (1.83 m)
 Rollers
 Front………………………………………………………………………………………………………………….... 3 in. (76.2 mm) diameter; grooved
 Rear (standard) ....................................................................................... 2.5 in. (63.5 mm) diameter, solid


                                                                        13
  Height-of-Cut Range ........................................... 3/8 in. (9.5 mm) to 21/4 in. (57.2 mm), infinitely adjustable
  Height-of-Cut Adjustment …………………………………………............... Fine; wrench adjustment on front and rear rollers
  Suspension .......................................................................................... Fixed or floating heads; changeable
  Grass Catchers.......................................................................................................................Polyethylene


4. DIMENSIONS                                            YES                    NO

  Weight Vehicle and Cutting Units (wet)………………...With three 26 in. (0.66m), 7-Blade Reels – 1,480 lbs. (671 kg)


5. LENGTH                                               YES                      NO
  With Reels ........................................................................................................................ 96 in. (2.44 m)


6. HEIGHT                                              YES                      NO
  To Top of Steering Wheel …………………………………………………………………………………………………………...... 51.5 in. (1.31 m)
  Wheelbase ..................................................................................................................... 55.3 in. (1.41 m)


7. WIDTH                                            YES                      NO
  Across Front Wheels........................................................................................................ 64.5 in. (1.64 m)
  With Mowers in Mowing Position ………………………………………………………………………………………………………78.5 in. (1.99 m)
  With Mowers in Transport Position …………………………………………………………………………………………………..76.5 in. (1.94 m)


8. OPTIONS/ACCESSORIES                                   YES                    NO

  Two-post ROPS with canopy, grooved front roller scrapers.


9. WARRANTY

  Please state all warranties




Name and Model Number: Jacobsen 1800 Tri-King (gas)
List all part numbers required for complete assembly.




Please list items you do not meet specifications on and give complete details of what you are offering.




                                                                        14
                                                                                                                 FIVE

                                                                                                                 Price: $20,874.00
                                                                                                                        TIECO

                                  SPECIFICATIONS FOR A
                                  3-GANG 84” CUT, DIESEL, REEL MOWER

                          •     Please circle YES if you meet or exceed this specification
                          •     Please circle NO if you do not meet this specification
                          •     Failure to circle YES or NO could disqualify your bid


1. ENGINE                                              YES                    NO
  Engine.............................................................................................................Kubota® D662 3-cylinder
  Horsepower..................................................................................................................19 hp (14.2 kW)
  Displacement.........................................................................................................40.03 cu. in. (656 cc)
  Air Cleaner..............................................................Two-stage, centrifugal, dry type, with Vacuator™ valve
  Cooling..........................................................................................................Pressurized, sealed cooling
  system
  Coolant Capacity: ..............................................................................................................3 qt. (2.85 l)
  Lubrication ........................................................................................ Fully pressurized with spin-on filter
  Capacity: 3.1 qt. (2.94 l)
  Electrical System …............................................................................................12-volt (0.8 kW) starter;
  40-amp alternator; key start

2. VEHICLE                                             YES                    NO

  Tires
  Front.......................................................................................................Two 20 x 10-10, 2-ply, tubeless
  Rear ........................................................................................................ One 20 x 10-8, 2-ply, tubeless
  Service Brake …….......................................................................Dynamic braking through hydrostatic drive
  Parking Brake .............................................................................Disc type on front wheels; hand-operated
  Mowing Speed .................................................................................................. 0 to 5 mph (0 to 8 km/h)
  Transport Speed .........................................................................................0 to 8.5 mph (0 to 13.7 km/h)
  Reverse Speed .............................................................................................0 to 2.3 mph (0 to 3.7 km/h)
  Traction Drive Direct-coupled hydrostatic transmission with high-torque wheel motors; “automatic” three-wheel
  drive with mower switch engaged
  Reel Drive .......................................... Fixed-displacement, three-section gear pump and three bi-directional
  Gear motors connected in parallel: hydraulic, variable-speed backlapping standard
  Reel Lift........................................ Single-pedal control; single hydraulic cylinder with automatic reel shutoff
  Operator Controls
  Foot-operated traction pedal, foot-operated reel lift/lower pedal, handthrottle, ignition switch, engine glow-plug
  switch(diesel), choke control (gas), mower/three-wheel-drive switch, parking brake, seat adjustment
  Gauges/Indicators
  Engine coolant temperature (diesel), voltmeter, hour meter, enginelow oil warning light, air filter restriction
  (diesel)
  Fuel Capacity ................................................................................................................. 6.5 gal. (25 l)
  Seat ................................................................................. High-back; front-to-rear adjustment standard
  Steering ................................................................................................. Hydrostatic power; rear wheel
  Hydraulic System ...................................................... 5.5 gal (21 l) capacity; 10-micron, full-flow filtration



3. MOWERS                                              YES                    NO

  Reel Number and Size
  Number of Blades ................................................................................................................................7
  Blade Material ..............................................................................Hardened, high-manganese carbon steel


                                                                       15
   Cutting Frequency
   7-blade .................................................................................................... 0.15 in./mph (2.38 mm/km/h)
   Rollers
   Front…………………………………………………………................................................ 3 in. (76.2 mm) diameter; grooved
   Rear (standard) .................................................................................... 2.5 in. (63.5 mm) diameter, solid
   Height-of-Cut Range ......................................... 3/8 in. (9.5 mm) to 21/4 in. (57.2 mm), infinitely adjustable
   Height-of-Cut Adjustment ………………………………………............... Fine; wrench adjustment on front and rear rollers
   Suspension ….................................................................................. Fixed or floating heads; changeable
   Grass Catchers ................................................................................................................Polyethylene


4. DIMENSIONS                                          YES                    NO

   Weight Vehicle and Cutting Units (wet)
   Three 30 in. (0.76m), 7-Blade Reels............................................................................1,642 lbs. (745kg)



5. LENGTH                                              YES                    NO
   With Reels ................................................................................................................... 96 in. (2.44 m)



6. HEIGHT                                              YES                    NO

   To Top of Steering Wheel ........ 51.5 in. (1.31 m)
   Wheelbase ................................................................................................................ 55.3 in. (1.41 m)



7. WIDTH                                               YES                    NO

   Across Front Wheels.................................................................................................... 64.5 in. (1.64 m)
   With Mowers in Mowing Position.....................................................................................90.5 in. (2.30 m)
   With Mowers in Transport Position..................................................................................88.5 in. (2.25 m)




8. OPTIONS/ACCESSORIES                                 YES                    NO

   Two-post ROPS with canopy, grooved front roller scrapers



9. WARRANTY                                            YES                    NO

  Please state all warranties




Name and Model Number: Jacobsen 1900 Tri-King (diesel)
List all part numbers required for complete assembly.




Please list items you do not meet specifications on and give complete details of what you are offering.




                                                                       16
                                                                                                                                    SIX

                                                                                                                                    Price: $34.626.00
                                                                                                                                           TIECO
                                                  SPECIFICATIONS FOR A
                                           5-GANG 36HP 2WD DIESEL REEL MOWER

                                   •      Please circle YES if you meet or exceed this specification
                                   •      Please circle NO if you do not meet this specification
                                   •      Failure to circle YES or NO could disqualify your bid

1. ENGINES                                                              YES                         NO
   Model ............................................... Kubota V1505E, 4-cycle, 4-cylinder, liquid-cooled, low-emissions-certified diesel
   Horsepower (@3,000 rpm) .......................................................................................................... 36 hp (28 kW)
   Displacement .................................................................................................................. 91.4 cu. in (1,498 cc)
   Air Cleaner ................................................... Donaldson dry cartridge type with evacuator valve and service indicator
   Cooling .................................................................. Pressurized, 8 qt. (7.6 l) capacity, 15.75 in. (40 cm) 8-blade fan
   Lubrication ............................................................................................................................ Fully pressurized
   Oil Filter ........................................................................................................ Full flow, replaceable spin-on type
   Electrical System .............................................................................................. 12V, 40-amp alternator/regulator

2. VEHICLE                                                             YES                          NO
   Traction Drive .................................... Variable displacement, servo-controlled hydrostatic drive; 2WD two high-torque
   wheel motors;
   Reel Drive ....................................... 3-section pump and direct coupled reel motors, each equipped with built-in relief
   Hydraulic System ...................................................... 14 gal (37.85 l) capacity; hydraulic oil monitor and horn alarm
   Hydraulic Cooling and Filtration .......................................... Hydraulic oil cooler; large volume, full flow 10-micron filter
   Mower Lift .................................................................... Joystick control, one touch lift/lower control for all five reels
   Steering ............................................................................................................................. Hydrostatic power
   Fuel Tank ............................................................................................................................... 17 gal. (63.34 l)
   Tires
   Front ..................................................................................................................... (2) 26.5 x 14.0-12 tubeless
   Rear ....................................................................................................................... (2) 20. 0 x 10.0-8 tubeless
   Brakes
   (Service) ............................................................................................... Dynamic braking through traction circuit
   (Parking) ................................................................................................ 9.25 in. (23.5 cm) disk on front wheels
   Ground Speed
   Forward ...................................................................................................................... 0 - 12 mph (19.3 km/h)
   Reverse Speed ................................................................................................................. 0 - 5 mph (8.1 km/h)

3.MOWER                                                             YES                          NO
   Reel Number, Size and Speed................................................... (5) 7 in. diameter x 22 in. (17.8 x 55.9 cm) 1,480 rpm
   Blades and Cutting Frequency................................... 9 heavy-section fairway blades .078 in / mph (1.98 mm / km/h
   Cutting Width ........................................................................................................................ 100 in. (2.54 m)
   Height of Cut..................................................................................................... 3/8 in. - 1–1/8 in. (9.5 - 28.5 mm)

4. DIMENSIONS                                                      YES                         NO
   Length (Catchers Off) .............................................................................................................. 108 in. (2.74 m)
   Height (Without ROPS) .......................................................................................................... 58.75 in. (1.49 m)
   Width
   (Mow Position) ....................................................................................................................... 115 in. (2.92 m)
   (Transport Position) .................................................................................................................... 87 in. (2.2 m)

5. WEIGHT                                                              YES                         NO
   Overall ................................................................................................................... (2WD) 2,790 lbs. (1,247 kg)

6. ACCESSORIES                                         YES               NO
   Two-post ROPS with seat belt, cruise control kit, canopy/sunshade, grooved roller scrapers

7. WARRANTY                                                         YES                      NO
  Please state all warranties




                                                                                     17
Name and Model Number: Jacobsen 3800 2-wd 5 gang

List all part numbers required for complete assembly.




Please list items you do not meet specifications on and give complete details of what you are
offering.




                                               18
                                                                                                                                    SEVEN

                                                                                                                                    Price: $37,142.00
                                                                                                                                           TIECO

                                                  SPECIFICATIONS FOR A
                                           5-GANG 36HP 4WD DIESEL REEL MOWER

                                   •      Please circle YES if you meet or exceed this specification
                                   •      Please circle NO if you do not meet this specification
                                   •      Failure to circle YES or NO could disqualify your bid


1. ENGINES                                                              YES            NO
   Model ............................................... Kubota V1505E, 4-cycle, 4-cylinder, liquid-cooled, low-emissions-certified diesel
   Horsepower (@3,000 rpm) .......................................................................................................... 36 hp (28 kW)
   Displacement .................................................................................................................. 91.4 cu. in (1,498 cc)
   Air Cleaner ................................................... Donaldson dry cartridge type with evacuator valve and service indicator
   Cooling .................................................................. Pressurized, 8 qt. (7.6 l) capacity, 15.75 in. (40 cm) 8-blade fan
   Lubrication ............................................................................................................................ Fully pressurized
   Oil Filter ........................................................................................................ Full flow, replaceable spin-on type
   Electrical System .............................................................................................. 12V, 40-amp alternator/regulator

2. VEHICLE                                                             YES          NO
   Traction Drive .................................... Variable displacement, servo-controlled hydrostatic drive; 4WD four high-torque wheel
   motors; on-demand electrically controlled hydraulic 4WD valve with constant downhill speed with downhill auto shift to 2WD
   Reel Drive ....................................... 3-section pump and direct coupled reel motors, each equipped with built-in relief
   Hydraulic System ...................................................... 14 gal (37.85 l) capacity; hydraulic oil monitor and horn alarm
   Hydraulic Cooling and Filtration .......................................... Hydraulic oil cooler; large volume, full flow 10-micron filter
   Mower Lift .................................................................... Joystick control, one touch lift/lower control for all five reels
   Steering ............................................................................................................................. Hydrostatic power
   Fuel Tank ............................................................................................................................... 17 gal. (63.34 l)
   Tires
   Front ..................................................................................................................... (2) 26.5 x 14.0-12 tubeless
   Rear ....................................................................................................................... (2) 20. 0 x 10.0-8 tubeless
   Brakes
   (Service) ............................................................................................... Dynamic braking through traction circuit
   (Parking) ................................................................................................ 9.25 in. (23.5 cm) disk on front wheels
   Ground Speed
   4WD Forward ............................................................................................................. 0 - 7.5 mph (12.1 km/h)
   Reverse Speed ................................................................................................................. 0 - 5 mph (8.1 km/h)

3. MOWER                                                            YES         NO
   Reel Number, Size and Speed.................................................. (5) 7 in. diameter x 22 in. (17.8 x 55.9 cm) 1,480 rpm
   Blades and Cutting Frequency................................... 11 heavy-section fairway blades .065 in / mph (1.65 mm / km/h)
   9 heavy-section fairway blades .078 in / mph (1.98 mm / km/h
   Cutting Width ........................................................................................................................ 100 in. (2.54 m)
   Height of Cut..................................................................................................... 3/8 in. - 1–1/8 in. (9.5 - 28.5 mm)

4. DIMENSIONS                                                      YES          NO
   Length (Catchers Off) .............................................................................................................. 108 in. (2.74 m)
   Height (Without ROPS) .......................................................................................................... 58.75 in. (1.49 m)
   Width
   (Mow Position) ....................................................................................................................... 115 in. (2.92 m)
   (Transport Position) .................................................................................................................... 87 in. (2.2 m)

5. WEIGHT                                                              YES        NO
   Overall...................................................................... …………………………………………………… (4WD) 2,915 lbs. (1,322 kg)

6. ACCESSORIES                                         YES    NO
   Two-post ROPS with seat belt, cruise control kit, canopy/sunshade, grooved roller scrapers

7. WARRANTY
   Please state all warranties




                                                                                     19
Name and Model Number: Jacobsen 3800 4-wd -7 gang

List all part numbers required for complete assembly.




Please list items you do not meet specifications on and give complete details of what you are
offering.




                                               20
                                                                                                                     EIGHT

                                                                                                                     Price: $44,154.00
                                                                                                                            TIECO

                                           SPECIFICATIONS FOR A
                                  SELF-CONTAINED 7-GANG FAIRWAY MOWER

                              •     Please circle YES if you meet or exceed this specification
                              •     Please circle NO if you do not meet this specification
                              •     Failure to circle YES or NO could disqualify your bid

1. ENGINE                                                  YES           NO

  Model ..... Kubota® V1505TE 4-cycle, 4-cylinder, turbocharged, liquid-cooled, low emissions-certified diesel
  Horsepower(@ 3,000 rpm) ........................................................................................ 44.2 (32.9 kW)
  Air Cleaner ...............................Donaldson dry-cartridge type with evacuator valve and service indicator
  Cooling ............................................... Pressurized 8 qt. (7.6 l) capacity, 15.75 in. (40 cm) 8-blade fan
  Lubrication ............................................................................................................ Fully pressurized
  Oil Filter ...................................................................................... Full-flow, replaceable spin-on type
  Electrical System ........................................................................... 12V, 40 amp alternator/regulator



2. VEHICLE                                                 YES          NO

  Traction Drive Variable-displacement, servo-controlled hydrostatic drive; 2WD – two high-torque wheel
  motors; 4WD – four high-torque wheel motors; on-demand, electrically controlled hydraulic 4WD valve, 4-
  section pump and direct coupled reel motors, each equipped with built-in relief
  Hydraulic System .................................. 14 gal (37.85 l) capacity; hydraulic oil monitor and horn alarm;
  large-volume hydraulic oil cooler with full-flow, 10-micron filter
  GreensCare™ biodegradable hydraulic fluid
  Mower Lift ...................................................... Joystick control; one-touch lift/lower 5/6/7-gang control
  Steering ............................................................................................ Hydrostatic, rear-wheel power
  Fuel Tank ............................................................................................................... 17 gal (63.34 l)
  Tires
  Front .................................................................................................... (2) 26.5 x 14.0-12 tubeless
  Rear ....................................................................................................... (2) 20.0 x 10.0-8 tubeless
  Brakes
  Service ................................................................................ Dynamic braking through traction circuit
  Parking ................................................................................ 9.25 in. (23.5 cm) disc on front wheels
  Ground Speed
  Forward ....................................................................................................... 0-12 mph (19.3 km/h)
  4WD Forward ............................................................................................... 0-7.5 mph (12.1 km/h)
  Reverse ........................................................................................................... 0-5 mph (8.1 km/h)



3. MOWER                                                   YES             NO

  Reel Number, Size and Speed..................................... (7) 7 in. dia. x 22 in.(17.8 x 55.9 cm); 1,480 rpm
  Blades and Cutting Frequency....................9 heavy-section fairway blades, .078 in./mph (1.98 mm/km/h)
  Cutting Width ........................................................................................................ 139 in. (3.53 m)
  Height of Cut...................................................................................... 3/8 in.-1-1/8 in. (9.5-28.5 mm)


4. DIMENSIONS                                              YES         NO

  Length (catchers off) .............................................................................................. 108 in. (2.74 m)
  Height (without ROPS) ........................................................................................ 58.75 in. (1.49 m)
  Width

                                                                          21
  Mow Position ......................................................................................................... 155 in. (3.93 m)
  Transport Position ..................................................................................................... 87 in. (2.2 m)

5. WEIGHT                                                 YES          NO

  Overall....................................................................................................... 3,450 lbs. (1,565 kg)


6. ACCESSORIES                                            YES         NO

  Two-post rollover protection structure (ROPS) with seat belt, cruise control kit, canopy/sunshade. This product has
  been tested and complies with B71.4-1999 ANSI voluntary safety specifications for commercial turf equipment.


7. WARRANTY
   Please state all warranties




  Name and Model Number: Jacobsen 4677 7 gang

  List all part numbers required for complete assembly.




  Please list items you do not meet specifications on and give complete details of what you are
  offering.




                                                                           22
                                                                                                                NINE

                                                                                                                Price: $8,333.00
                                                                                                                       TIECO

                                             SPECIFICATIONS FOR A
                                         16HP 800 LB. CAPACITY HAULER

                          •     Please circle YES if you meet or exceed this specification
                          •     Please circle NO if you do not meet this specification
                          •     Failure to circle YES or NO could disqualify your bid



1. ENGINE                                  YES                    NO

  Engine .................................... 16 hp (11.9 kW) rated, 4-cycle, 29.2 cu. in. (480 cc), twin-cylinder, air-cooled
  Valve Train ..................................................................................................................... Overhead valve
  Lubrication ........................................................... Pressurized oil system; replaceable automotive-type filter
  Carburetor ........................................................................ Fixed-jet float bowl with remote-pulse fuel pump
  Air-Cleaning System ……........................................................... Replaceable dry cartridge with remote intake
  Ignition ............................................................... Magnetron™ ignition with self-contained transistor module


2. OTHER FEATURES                          YES                    NO

  Electrical System....External starter/generator; 12-volt, maintenance-free battery; 515 CCA; 82-minute reserve
  Drivetrain .... High-efficiency differential with helical gears and differential lock; 13.32:1 ground speed governor
  Transaxle ....................................... Automatic, continuously variable transmission (CVT) forward and reverse
  Brakes .......... Dual rear-wheel, self-adjusting hydraulic drum brakes; hand-operated parking brake mounted in
  center console
  Suspension.............................................................................. Leaf springs with hydraulic shock absorbers
  Steering ..................................................................... Self-compensating, single-reduction rack-and-pinion
  Seating..........Individual bucket seats for operator and one passenger with vacuum-formed, fabric-backed vinyl
  covers over cushion foam
  Fuel Capacity......................................................................................... 6 gal. (3.7 l) tank; 31 lbs. (14 kg)
  Speed ................................................................................................... Factory-set to 15 mph maximum
  Tires .......................................................................................................... 20 x 10-10 Turf Saver® tires
  Load Bed ..............Tilts for complete access to drive package; electric dump; removable sides and tailgate; full
  bed and tailgate liner
  Chassis……………….…………………………………………………………………………………... Welded, high-yield-strength tubular steel
  Body
  Front ................................................................................................. Flexible, impact-resistant front cowl
  Rear ................................................................................................ Replaceable, lightweight steel panels
  Finish.................................................................................................... DuraShield™ primer and top coat
  Body Protection................... Flexible front flare and rear fenders; tubular-steel front bumper with brush guards


  Operation……………….... Key switch, reverse warning indicator, “dead-man” accelerator control, hand grip and hip
  restraints, halogen headlights, horn, powertrain skid plate Instrument Panel Four drink holders, analogue fuel
  gauge, low oil indicator light, 12-volt power outlet
  Control Console ...... Manual forward/reverse switch, parking brake handle, choke lever, differential lock control
  Steering Wheel..................................................................................................................... Sport model
  Additional Features …........................... Headlights, brush guard for engine and drive belt, trailer hitch without
  ball, front and rear receiver


3. DIMENSIONS                                          YES                    NO

  Weight................................................................................................................. 1,050 lbs. (476 kg) dry


                                                                      23
   Length.................................................................................................................... 110.5 in. (280.6 cm)
   Width......... 48 in. (122 cm) at bed
   Height... 49 in. (125 cm) at steering wheel
   Floor Height...................................................................................................................... 15 in. (38 cm)
   Load Bed Height................................................................................................................ 34 in. (86 cm)
   Ground Clearance............................................................................................ 6 in. (15 cm) at differential
   Seat Height...................................................................................................................... 33 in. (84 cm)
   Wheelbase...................................................................................................................... 77 in. (196 cm)
   Turning Clearance Diameter.............................................................................................. 23.5 ft. (7.2 m)
   Load Capacity ....... 800 lbs. (363 kg), including operator, passengers, accessories and cargo; 500 lbs. (227 kg)
   max. cargo bed load
   Load-Bed Size............................................... 48 in. wide, 40 in. long, 12 in. deep; 13.3 cu. ft. (0.49 cu. yd.)


4. OPTIONS                                              YES                    NO

   Lighting................................................................................................................. Taillights, brake lights
   Weather Enclosures................ Sun canopy kit – white; windshield kit – split or one piece, Lexan or acrylic (sun
   canopy required); weather protection package – white or tan
   Cargo Bed.................................................................................................. Heavy-duty aluminum toolbox
   Tires...................................................................................... 22 x 9-10 Stryker®; 21 x 9-10 Work Mate®



5. WARRANTY

Please state all warranties




Name and Model Number: Jacobsen 4800 Hauler
List all part numbers required for complete assembly.




Please list items you do not meet specifications on and give complete details of what you are offering.




                                                                       24
                                                                                                                         TEN

                                                                                                                         Price: $8,983.00
                                                                                                                                TIECO

                                            SPECIFICATIONS FOR A
                                     WALK BEHIND ELECTRIC GREENS MOWER

                                •     Please circle YES if you meet or exceed this specification
                                •     Please circle NO if you do not meet this specification
                                •     Failure to circle YES or NO could disqualify your bid


1. ELECTRICAL POWER                                          YES         NO
   Voltage..................................................................................................................... 48-volt DC
   Motors ......................................... Two 48-volt, brushless DC with built-in, sealed-control electronics
   Batteries ........... Four 12-volt, sealed lead-acid, wired in series; removable battery pack in plastic case
   Charger (standard)..................................... 2-amp, 48-volt; dual-voltage 115/230-volt AC, 50/60 Hz

2. TRACTION AND REEL DRIVE SYSTEM                            YES        NO
   Traction Drive .................................... Independent motor to two synchronous belts to traction drum
   Traction Reduction Ratio ..................................................................................................15.15:1
   Mowing Speed ...................................................................... 0.75 to 3.4 mph (1.21 to 5.47 km/h)
   Rear Drive Drum ..... Two machined, aluminum alloy; 7.745 in. (197 mm) O.D. x 10.97 in. (278 mm) L
   Differential .............................................................. Full automotive-type; housed in traction drum
   Transport Tires ......................... Two bi-directional, pneumatic, 11 in. x 4 in. (279.4 mm x 101.6 mm)
   Brakes ...................................................................... Band on each side of drum; handle-actuated
   Reel Drive .................................................................................. Independent motor (direct drive)
   Operator Presence Control (OPC)........................ Integral OPC design; controls reel and traction drive

3. MOWER                                                      YES       NO
   Type................................................................................................................................. Reel
   Number of Blades................................................................................................................... 11
   Reel Speed (factory setting) ........................................................................................ 2,200 rpm
   Frequency of Cut............................................................................................ Variable (see chart)
   Ground Speed Cutting Frequency
   3.4 mph (5.47 km/h) 0.148 in. (3.76 mm)
   3.2 mph (5.15 km/h) 0.14 in. (3.56 mm)
   3 mph (4.83 km/h) 0.131 in. (3.33 mm)
   2.8 mph (4.51 km/h) 0.122 in. (3.1 mm)
   2.6 mph (4.18 km/h) 0.113 in. (2.87 mm)
   2.4 mph (3.86 km/h) 0.105 in. (2.67 mm)
   2.2 mph (3.54 km/h) 0.096 in. (2.44 mm)
   2 mph (3.22 km/h) 0.087 in. (2.21 mm)
   Width of Cut ................................................................................................... 22 in. (557.5 mm)
   Height-of-Cut Range ...................................................... 3/64 in. to 7/16 in. (1.2 mm to 11.1 mm)
   Reel Diameter..................................................................................................... 5 in. (127 mm)
   Reel Shaft Diameter ..................................................................................... 15/16 in. (23.8 mm)
   Blade Material.................................................................. Hardened, high-manganese carbon steel
   Reel Bearing ......................................................................... Spring-loaded Timken tapered roller
   Side-Frame Material ........................................................................................... Aluminum alloy

4. BEDKNIVES                                                 YES       NO
   Bedknife Material .............................................................................. Hardened, high-carbon steel
   High Profile (optional) ................................ 0.25 in. (6.36 mm) thick; allows 5/32 in. (3.96 mm) cut
   Low Profile (optional) ..................................... 0.2 in. (5.1 mm) thick; allows 7/64 in. (2.77 mm) cut
   Tournament (optional) .............................. 0.175 in. (4.45 mm) thick; allows 5/64 in. (1.98 mm) cut
   Super Tournament (standard) .................... 0.053 in. (1.34 mm) thick; allows 3/64 in. (1.19 mm) cut
   Catcher ................................................................................................................. Polyethylene

5. WEIGHT                                                     YES      NO


                                                                             25
  Overall (with battery pack)
  on green with catcher and machined-aluminum grooved roller ............................ 223 lbs. (101.2 kg),
  Adjustable Front Roller Weight
  (with aluminum grooved roller) .............................................. 35 lbs. to 45 lbs. (15.9 kg to 20.4 kg)

6. BATTERIES (four required)                                  YES       NO
   Type ................................................................................................ 20 amp-hr. sealed lead-acid
   Physical Dimensions ........................ 7.13 in L x 2.99 in W x 6.57 in H (181 mm x 76 mm x 167 mm)
   Part Number ............................................................................................................... 4121377

7. OPTIONS                                                   YES      NO
   Charger .......................................................................................................................... 5 amp
   Work Light ....................................................................................................... 48 volt headlight
   Wheel Kit..........................................................................................................................62293

8. WARRANTY
  Please state all warranties




  Name and Model Number: Jacobsen Electric

  List all part numbers required for complete assembly.




  Please list items you do not meet specifications on and give complete details of what you are
  offering.




                                                                            26
                                                                                                         ELEVEN

                                                                                                         Price: $16,380.00
                                                                                                                TIECO

                                            SPECIFICATIONS FOR A
                                       RIDING 18 HP GAS GREENS MOWER

                            •    Please circle YES if you meet or exceed this specification
                            •    Please circle NO if you do not meet this specification
                            •    Failure to circle YES or NO could disqualify your bid
1.ENGINE                                                     YES         NO
  Model........................... Briggs & Stratton® Vanguard™ V-twin, 4-cycle, 2-cylinder, OHV
  Horsepower (@ 3,600 rpm) .................. 18 hp (13.4 kW)
  Displacement ................................. 34.8 cu. in. (570 cc)
  Air Cleaner ............................. Replaceable dual element
  Cooling ......................................................... Air-cooled
  Lubrication .......................................... Fully pressurized
  Oil Filter ................................ Replaceable, spin-on type
  Electrical System ......................... 12-volt Bendix starter; 16-amp alternator; key start

2. VEHICLE                                            YES      NO
   Tires ..................... 18 x 9.5-8, 2-ply, pneumatic, tubeless
   Brakes ....................... Automotive-type on drive wheels, internal expanding, 7 in. (178 mm); hand-operated
   parking brake locks service brake in engaged position

3. SPEED                                              YES       NO
   Mowing ............................... 0 to 3.7 mph (0 to 6 km/h)
   Transport ........................ 0 to 6.6 mph (0 to 10.6 km/h)
   Reverse ............................ 0 to 3.5 mph (0 to 5.6 km/h)

4. DRIVE                                                   YES       NO
   Transmission .................................................. Hydraulic
   Traction Drive ..................................... Hydraulic torque motor on each drive wheel; integral, full-differential
   action

5. REELS                                                    YES      NO
   Reel Drive............................. Gear-type hydraulic motor; dual direction on each reel
   Reel Lift .......................................Individual reel control; hydraulic, double-action cylinders

6. STEERING                                               YES        NO
   Greens Mower....................... Power, rear wheel; round tilt steering wheel
   Hydraulic System ....................... 5 gal (18.9 l) reservoir;
   Filter ...................................25-micron, full-flow filtration

7. MOWERS                                                    YES       NO
   Number and Size .................. Three 22 in. (0.56 m) reels; 5 in. (127 mm) diameter
   Number of Blades .......................................... …9 or 11
   Blade Material .... Hardened, high-manganese carbon steel
   Cutting Frequency (11-blade reels) .................. 0 to 0.18 in. (0 to 4.57 mm)
   Cutting Width ......................... 22 in. (0.56 m) each unit; 62 in. (1.57 m) overall
   Rollers ................................................ Solid or grooved
   Height-of-Cut Range ....................... 0.052 in. (1.32 mm) to 0.437 in. (11.1 mm), depending on turf conditions
   and bedknife installed
   Grass Catchers .......................................... Polyethylene

8. BEDKNIVES                                              YES    NO
   High Profile.............................. 0.25 in. (6.35 mm) thick, 0.132 in. (3.35 mm) cutting height
   Low Profile ................................. 0.2 in. (5.1 mm) thick, 0.109 in. (2.77 mm) cutting height
   Tournament 0.175 in. (4.45 mm) thick, 0.083 in. (2.11 mm) cutting height
   Super Tournament ................ 0.155 in. (3.94 mm) thick, 0.052 in. (1.32 mm) cutting height


                                                                   27
  Bedknife Adjustment ....................... Opposed screw type
  Bedknife Material ................. Hardened, high-manganese carbon steel

9. DIMENSIONS                                             YES      NO
   Weight
   Gas – Traction Unit Only (wet) ........... 900 lbs. (408.2 kg)
   Gas – With Cutting Units (wet) ......... 1,074 lbs. (487.2 kg)
   Length ................................... 99.5 in. (2.53 m), catchers on; 87.5 in. (2.22 m), catchers off
   Wheelbase .......................................... 52.8 in. (1.34 m)
   Height.......................... 51.5 in. (1.28 m)
   Width.................................... 50.5 in. (1.28 m) across wheels,
   41.5 in. (1.05 m) tread; 70 in. (1.78 m) with mowers in mowing position
   Turning Radius .............................. 20 in. (51 cm) uncut circle; 34 in. (86 cm) to centerline of tractor

10. ACCESSORIES                                    YES       NO
   Grooved disc roller; smooth roller; grooved, machined steel roller; grooved, machined aluminum roller; 22 in.
   front-roller, finebristle brush; 22 in. steel machined, rear roller brush; deluxe support seat; armrests; 9- and 11-
   blade reels; high cut roller kit (over 0.875 in./22.2 mm height of cut); Turf Groomer® (0.25 in. spacing or 0.50 in.
   spacing); vertical mowers; spiker attachment; GreenSentry™ oil system monitor; traction tire conversion kit;
   variable step-cut device; light kit

11. WARRANTY
  Please state all warranties




  Name and Model Number: Jacobsen G.K. IV Plus (gas)

  List all part numbers required for complete assembly.




  Please list items you do not meet specifications on and give complete details of what you are
  offering.




                                                                28
                                                                                                          TWELVE

                                                                                                         Price: $18,322.00
                                                                                                                TIECO
                                          SPECIFICATIONS FOR A
                                    RIDING 19 HP DIESEL GREENS MOWER

                            •    Please circle YES if you meet or exceed this specification
                            •    Please circle NO if you do not meet this specification
                            •    Failure to circle YES or NO could disqualify your bid


1. ENGINE                                                  YES       NO
  Model .......................... Kubota® D662 3-cylinder diesel
  Horsepower (@ 3,600 rpm) .................. 19 hp (14.2 kW)
  Displacement ............................... 40.03 cu. in. (656 cc)
  Air Cleaner .................................... Dry type, Donaldson
  Cooling ..................... Pressurized, sealed cooling system; coolant capacity: 3 qt. (2.85 l)
  Lubrication .......................................... Fully pressurized
  Oil Filter ................................ Replaceable, spin-on type
  Electrical System ......................... 12-volt Bendix starter; 14-amp alternator; key start

2. VEHICLE                                            YES      NO
   Tires ..................... 18 x 9.5-8, 2-ply, pneumatic, tubeless
   Brakes ....................... Automotive-type on drive wheels, internal expanding, 7 in. (178 mm); hand-operated
   parking brake locks service brake in engaged position

3. SPEED                                              YES       NO
   Mowing ............................... 0 to 3.7 mph (0 to 6 km/h)
   Transport ........................ 0 to 6.6 mph (0 to 10.6 km/h)
   Reverse ............................ 0 to 3.5 mph (0 to 5.6 km/h)

4. DRIVE                                                   YES        NO
   Transmission .................................................. Hydraulic
   Traction Drive ..................................... Hydraulic torque motor on each drive wheel; integral, full-differential
   action

5. REELS                                                    YES       NO
   Reel Drive............................. Gear-type hydraulic motor; dual direction on each reel
   Reel Lift .......................................Individual reel control; hydraulic, double-action cylinders

6. STEERING                                               YES         NO
   Greens Mower ....................... Power, rear wheel; round tilt steering wheel
   Hydraulic System ....................... 5 gal (18.9 l) reservoir;
   Filter ...................................25-micron, full-flow filtration

7. MOWERS                                                    YES        NO
   Number and Size .................. Three 22 in. (0.56 m) reels; 5 in. (127 mm) diameter
   Number of Blades .......................................... 9 or 11
   Blade Material .... Hardened, high-manganese carbon steel
   Cutting Frequency (11-blade reels) .................. 0 to 0.18 in. (0 to 4.57 mm)
   Cutting Width ......................... 22 in. (0.56 m) each unit; 62 in. (1.57 m) overall
   Rollers ................................................ Solid or grooved
   Height-of-Cut Range ....................... 0.052 in. (1.32 mm) to 0.437 in. (11.1 mm), depending on turf conditions
   and bedknife installed
   Grass Catchers .......................................... Polyethylene

8. BEDKNIVES                                              YES     NO
   High Profile.............................. 0.25 in. (6.35 mm) thick, 0.132 in. (3.35 mm) cutting height
   Low Profile ................................. 0.2 in. (5.1 mm) thick, 0.109 in. (2.77 mm) cutting height
   Tournament 0.175 in. (4.45 mm) thick, 0.083 in. (2.11 mm) cutting height


                                                                   29
  Super Tournament ................ 0.155 in. (3.94 mm) thick, 0.052 in. (1.32 mm) cutting height
  Bedknife Adjustment ....................... Opposed screw type
  Bedknife Material ................. Hardened, high-manganese carbon steel

9. DIMENSIONS                                             YES       NO
   Weight
   Diesel – Traction Unit Only (wet) ..... 1,166 lbs. (528.9 kg)
   Diesel – With Cutting Units (wet) .... 1,340 lbs. (607.8 kg)
   Length ................................... 99.5 in. (2.53 m), catchers on;
   87.5 in. (2.22 m), catchers off
   Wheelbase .......................................... 52.8 in. (1.34 m)
   Height………………………………………………………….51.5 in. (1.28 m)
   Width.................................... 50.5 in. (1.28 m) across wheels, 41.5 in. (1.05 m) tread; 70 in. (1.78 m) with
   mowers in mowing position
   Turning Radius .............................. 20 in. (51 cm) uncut circle; 34 in. (86 cm) to centerline of tractor

10. ACCESSORIES                                    YES       NO
   Grooved disc roller; smooth roller; grooved, machined steel roller; grooved, machined aluminum roller; 22 in.
   front-roller, finebristle brush; 22 in. steel machined, rear roller brush; deluxe support seat; armrests; 9- and 11-
   blade reels; high-cut roller kit (over 0.875 in./22.2 mm height of cut); Turf Groomer® (0.25 in. spacing or 0.50 in.
   spacing); vertical mowers; spiker attachment; GreenSentry™ oil system monitor; traction tire conversion kit;
   variable step-cut device; light kit

11. WARRANTY
  Please state all warranties




  Name and Model Number: Jacobsen G.K. IV Plus (diesel)

  List all part numbers required for complete assembly.




  Please list items you do not meet specifications on and give complete details of what you are
  offering.




                                                               30
                                                                                                                                                      THIRTEEN

                                                                                                                                                      Price: $14,983.00
                                                                                                                                                             TIECO

                                                         SPECIFICATIONS FOR A
                                                     3-WHEEL DRIVE, SANDTRAP RAKE
                                                               18 HP GAS

                                   •       Please circle YES if you meet or exceed this specification
                                   •       Please circle NO if you do not meet this specification
                                   •       Failure to circle YES or NO could disqualify your bid


1. ENGINE CHOICES                                                        YES                            NO

  Gas ......................................................................................... Two-cylinder, air-cooled Briggs & Stratton® Vanguard™ V-twin gas
  Horsepower (@ 3,600 rpm) .................................................................................................................................... 18 hp (13. 4 kW)
  Charging System …………………………………............................................................. 12-volt, 16-amp alternator; full-size battery
  Air Cleaner ................................................................................................................................... Donaldson-type; remote-mounted
  Diesel ............................................................................................................................................................. Kubota Three-Cylinder
  Horsepower (@ 3,600 rpm) ................................................................................................................................... 19.2 hp (14.3 kW)
  Charging System ............................................................................................................ 12-volt, 40 amp alternator; full-size battery
  Air Cleaner ………………………………….................................................................................... Donaldson-type; remote-mounted


2. PERFORMANCE                                                           YES                            NO

  Forward Speed ........................................................................................................................... 0 to 10 mph, transport and working
  Reverse Speed ...............................................................................................................................................................0 to 3.5 mph


3. HYDRAULIC SYSTEM                                                      YES                            NO

  Drive .......................................................................................................................... Hydrostatic, three-spool valve for accessories
  Hydraulic Oil Capacity ...................................................................... 12 qt. (11.4 l) Greenscare 68 Biodegradeable, 25-micron filter
  Hydraulic System Oil Cooler ………………………………................................................................ Side location; isolation-mounted
  Brakes ............................................................................................................... Hydrostatic braking, with mechanical parking brake
  Steering ......................................................................................................... Hydraulic power steering with automotive style wheel
  Tires ..................................................................................................................... Three 20 x 11.00-10 tubeless, knobby-tread tires


4. DIMENSIONS                                                            YES                            NO

  Length (with rake) ......................................................................................................................................................... 90 in. (2.3 m)
  Maximum Width (with rake) ……………………………………..................................................................................... 73.5 in. (1.9 m)
  Ground Clearance ....................................................................................................................................................... 7.5 in. (20 cm)
  Wheelbase ....................................................................................................................................................................... 40 in. (1 m)
  Outside Wheel Tread .................................................................................................................................................... 59 in. (1.5 m)
  Turning Radius .......................................................................................................................................................... 70.5 in. (1.8 m)
  Weight (with rake)…………..………..Three-Wheel Drive - 984 lbs./ 446.3 kg for gas model & 1017 lbs./ 461.3 kg for Diesel model
  Fuel Capacity ............................................................................................................................................................. 4.5 gal. (17.1 l)


5. OVERALL DIMENSIONS                                                    YES                            NO

  Width ............................................................................................................................................................................. 62 in. (1.6 m)
  Length ....................................................................................................................................................................... 28 in. (711 mm)
  Height ....................................................................................................................................................................... 20 in. (506 mm)
  Weight (shipping) ……………………………………................................................................................................ 220 lbs. (99.8 kg)


6. ACCESSORIES                                                           YES                            NO



                                                                                              31
   Front blade; rear-mount rake; drag mat hydraulic; mid-mount scarifier with full-width leveling blade.


7. WARRANTY

   Please state all warranties


Name and Model Number: Cushman Groom Master II (gas)
List all part numbers required for complete assembly.




Please list items you do not meet specifications on and give complete details of what you are offering.




                                                                 32
                                                                                                                   FOURTEEN

                                                                                                                   Price: $17,778.00
                                                                                                                          TIECO
v


                                             SPECIFICATIONS FOR A
                                         3-WHEEL DRIVE, SAND TRAP RAKE
                                                  19 HP DIESEL
                            •     Please circle YES if you meet or exceed this specification
                            •     Please circle NO if you do not meet this specification
                            •     Failure to circle YES or NO could disqualify your bid


1. ENGINE CHOICES                                        YES                    NO

    Diesel .................................................................................................................. Kubota Three-Cylinder
    Horsepower (@ 3,600 rpm) .......................................................................................... 19.2 hp (14.3 kW)
    Charging System ..................................................................... 12-volt, 40 amp alternator; full-size battery
    Air Cleaner ........................................................................................... Donaldson-type; remote-mounted


2. PERFORMANCE                                           YES                    NO

    Forward Speed …................................................................................ 0 to 10 mph, transport and working
    Reverse Speed ....................................................................................................................0 to 3.5 mph


3. HYDRAULIC SYSTEM                                      YES                    NO

    Drive ................................................................................... Hydrostatic, three-spool valve for accessories
    Hydraulic Oil Capacity ..................................... 12 qt. (11.4 l) Greenscare 68 Biodegradeable, 25-micron filter
    Hydraulic System Oil Cooler …………............................................................. Side location; isolation-mounted
    Brakes ……….................................................................. Hydrostatic braking, with mechanical parking brake
    Steering ………............................................................. Hydraulic power steering with automotive style wheel
    Tires ………....................................................................... Three 20 x 11.00-10 tubeless, knobby-tread tires


4. DIMENSIONS                                            YES                    NO

    Length (with rake) ………..................................................................................................... 90 in. (2.3 m)
    Maximum Width (with rake) ………...................................................................................... 73.5 in. (1.9 m)
    Ground Clearance ………..................................................................................................... 7.5 in. (20 cm)
    Wheelbase ………................................................................................................................... 40 in. (1 m)
    Outside Wheel Tread ……….................................................................................................. 59 in. (1.5 m)
    Turning Radius ………........................................................................................................ 70.5 in. (1.8 m)
    Weight (with rake)..….Three-Wheel Drive - 984 lbs./ 446.3 kg for gas model & 1017 lbs./ 461.3 kg for Diesel
    model
    Fuel Capacity ................................................................................................................. 4.5 gal. (17.1 l)


5. OVERALL DIMENSIONS                                    YES                      NO
   Width .............................................................................................................................. 62 in. (1.6 m)
   Length ......................................................................................................................... 28 in. (711 mm)
   Height .......................................................................................................................... 20 in. (506 mm)
   Weight (shipping) ........................................................................................................ 220 lbs. (99.8 kg)


6. ACCESSORIES                                           YES                    NO

    Front blade; rear-mount, rake; drag mat, hydraulic; mid-mount scarifier with full-width leveling blade.


                                                                         33
7.   WARRANTY

     Please state all warranties




Name and Model Number: Cushman Groom Master II (diesel)
List all part numbers required for complete assembly.




Please list items you do not meet specifications on and give complete details of what you are offering.




                                                         34
                                                                                                                    FIFTEEN

                                                                                                                    Price: $32,443.00
                                                                                                                           TIECO
                                                 SPECIFICATIONS FOR A
                                              3-GANG 44 HP ROTARY MOWER

                              •     Please circle YES if you meet or exceed this specification
                              •     Please circle NO if you do not meet this specification
                              •     Failure to circle YES or NO could disqualify your bid



1. ENGINE                                                  YES             NO

  Model ................................................................................. 4-cylinder, liquid-cooled Kubota® diesel
  Horsepower (@ 3,000 rpm) .................................................................................. 44.2 hp (32.9 kW)
  Displacement ................................................................................................. 91.4 cu. in. (1498 cc)
  Cooling ............................................. Pressurized; 8 qt. (7.6 l) capacity; 15.75 in. (40 cm) 8-blade fan
  Lubrication ........................................................... Full-pressure system with spin-on, full-flow oil filter
  Electrical System ............................................................ 12-volt starter; 40-amp alternator/regulator



2. VEHICLE                                                 YES          NO

  Traction Drive
  Four-Wheel Drive ......................................... Variable-displacement, servo-controlled hydrostatic drive;
  four high-torque wheel motors; on-demand electrically controlled, hydraulic,
  four-wheel-drive valve with constant downhill speed
  Cutter Drive ....... Hydraulic cutting units driven by fixed-displacement motors directly coupled to cutting blades
  Hydraulic System ................... 14 gal (53 l) capacity; 10-micron charge filter; 10-micron return line filter
  Steering ............................................................................. Hydrostatic power steering with tilt wheel
  Fuel Tank ................................................................................................................ 17 gal. (64.3 l)
  Tires
  Front ........................................................................................ Two 26 x 12.00-12, 6-ply, turf tread
  Rear ........................................................................................... Two 20 x 10.00-8, 4-ply, turf tread
  Brakes
  Service ............................................................................. Hydrostatic drive provides positive braking
  Parking ........................................................................... 9.25 in. (260 mm) front disc; foot-operated
  Frame .................................................................................................. Welded tubular construction
  Seat ..... High-back, vinyl-covered, deluxe suspension seat; 5 in. (127 mm) forward/backward adjustment
  Speed
  Mowing Speed (max. four-wheel drive) .................................................... 0 to 7.5 mph (0 to 12 km/h)
  Transport Speed (two-wheel drive) ....................................................... 0 to 15 mph (0 to 24.1 km/h)
  Reverse Speed ....................................................................................... 0 to 5.6 mph (0 to 9 km/h)



3. MOWERS                                                  YES           NO

  Deck Number and Size ................................... Three 35 in. (89 cm), rear-discharge rotary cutting decks
  Cutting Blades .................................................................................... (Two per deck) 18 in. (46 cm)
  Construction ................................................................................. Heavy-duty, welded, pressed steel
  Cutting Unit Lift ............................... Single lift arm to all units; intermediate and transport lift positions
  Suspension ................................................................................................................ Floating head
  Cutting Width
  Three Decks ............................................................................................................. 92 in. (2.3 m)
  Two Decks (front, center)......................................................................................... 63.3 in. (1.6 m)
  One Deck (front) ................................................................................................. 34.9 in. (886 mm)


                                                                          35
  Height of Cut ...................................... 1 in. (25 mm) to 4 in. (102 mm) in 0.5 in. (12 mm) increments;
  no tools required for adjustment
  Cutting Capacity ............................................................ 7.5 acres/hr. at 7.5 mph (3 ha/h at 12 km/h)

4. DIMENSIONS                                           YES          NO

  Overall Length ......................................................................................................... 133 in. (3.4 m)
  Overall Height ........................... 58.7 in. (1.5 m) to top of steering wheel; 80.5 in. (2 m) to top of ROPS
  Overall Width
  Mowing ................................................................................................................. 93.6 in. (2.4 m)
  Transport ................................................................................................................ 60 in. (1.5 m)
  Weight ............................................................................................................ 2,930 lbs. (1329 kg)
  Instruments: Hour meter, coolant temperature gauge, fuel gauge, engine oil pressure light, battery charge light,
  hydraulic oil level light, hydraulic oil filter light, glow-plug light, air cleaner indicator
  Controls: Key ignition switch, hand throttle, parking brake lock and release, left and right steering assist
  brakes with brake lock bar, mow speed limiter, traction assist switch, hydraulic oil level alarm switch,
  forward/reverse foot treadle, infinitely variable speed control, cutting deck lift lever, mower switch, two-wheel/
  Four-wheel-drive switch, hydraulic weight transfer traction assist control, tilt steering lever



5.ACCESSORIES                                           YES          NO

  Two-post rollover protection structure (ROPS) with seat belt; headlights; suspension seat with armrests; one-piece,
  high-back seat; canopy/sunshade; cruise control



6. WARRANTY
   Please state all warranties




  Name and Model Number: Jacobsen HR 4600

  List all part numbers required for complete assembly.




  Please list items you do not meet specifications on and give complete details of what you are
  offering.




                                                                      36
                                                                                                                    SIXTEEN

                                                                                                                    Price: $38,562.00
                                                                                                                           TIECO
                                          SPECIFICATIONS FOR A
                                  SELF-CONTAINED 11’ CUT ROTARY MOWER

                              •     Please circle YES if you meet or exceed this specification
                              •     Please circle NO if you do not meet this specification
                              •     Failure to circle YES or NO could disqualify your bid


1. ENGINE                                                  YES            NO

  Model ..................................................................... Kubota® V2203D 4-cylinder, liquid-cooled diesel
  Horsepower (@ 2,800 rpm) .................................................................................... 49 hp (36.5 kW)
  Displacement ............................................................................................... 134.1 cu. in. (2197 cc)
  Torque (@ 1,200 rpm) .................................................................................................... 109 ft.-lb.
  Air Cleaner ....................................................................................... Remote Cyclopac cartridge type
  Cooling ......................... Pressurized, sealed cooling system; 7-blade fan; coolant capacity: 2 gal. (7.6 l)
  Lubrication ........................................................................................................... Fully pressurized
  Oil Filter ................................................................................................... Replaceable, spin-on type
  Electrical System ................................ 45-amp alternator; 750 CCA heavy-duty battery; circuit breaker



2. VEHICLE                                                 YES            NO

  Traction System ..................................... Hydrostatic, closed-loop system; variable-displacement piston
  pump; fixed-displacement piston motor to front differential axle with integral gear reduction; motors on rear
  wheels electro-hydraulically engage/disengage for four-wheel drive
  Differential .............................................. Single-speed, differential lock electro-hydraulically activated
  PTO Drive ....................................................................................................................... Hydraulic
  Steering ................................................................................. Power; rear wheel; tilt steering wheel
  Tires
  Front (drive) ................................................................................................................ 26 x 12-12
  Rear (steering) ........................................................................................................... 23 x 10.5-12
  Service Brakes ...................... Dynamic braking from transmission; hydraulic disc brakes on front wheels
  Parking Brake ................................................................................... Independent disc on drive line
  Hydraulic System ................................. 17 gal (64.3 l) reservoir; “O” ring-face seal fittings; charge and
  return filters; suction screen at tank; oil cooler; diagnostic test ports
  Speeds
  Forward (two-wheel drive) .................................................................... 0 to 15 mph (0 to 24.1 km/h)
  Forward (four-wheel drive) .................................................................. 0 to 8.4 mph (0 to 13.5 km/h)
  Reverse (two-wheel drive) ....................................................................... 0 to 6 mph (0 to 9.6 km/h)
  Reverse (four-wheel drive) ............................................................................................. Locked out
  Instruments .......................... Voltmeter, hour meter, tachometer, water temperature gauge, fuel gauge
  Indicators ................ Glow plug, engine oil pressure, water temperature, air filter restriction, hydraulic oil
  filter pressure, oil temperature, hydrostatic low charge pressure, filter pressure
  Controls ............................................... Throttle, hydraulic lift/lower, ignition switch, glow-plug switch,
  PTO switch, individual mower switches, hydro pedal, brake, differential lock switch
  Fuel Capacity ......................................................................................................... 20 gal. (75.7 l)
  Seat ............................................................................................ Adjustable, high-back suspension
  ROPS ............................................................................................ Standard two-post with seat belt




3. DECKS                                                   YES           NO

  Size ................... One 64 in. (1.62 m) full-floating front deck;two 42 in. (1.06 m) full-floating wing decks


                                                                          37
  Blades ......................................................................................................... Seven 23 in. (0.58 m)
  Blade Drive .................................................... Hydraulic motors with integral bearings; self-lubricating
  Cutting Width ............................................ 134 in. (3.4 m); 99 in. (2.51 m) with one wing deck raised;
  64 in. (1.62 m) with both wing decks raised
  Discharge ...................................................................................................................... Rearward
  Caster Wheels ........................................................................................ Ten 4 x 11 pneumatic tires
  Cutting Height .................................................................... 1 in. to 5 1/2 in. (24.5 mm to 139.7 mm)

4. DIMENSIONS                                              YES            NO

  Weight (transport) ........................................................................................... 3,381 lbs. (1534 kg)
  Height (with ROPS) ................................................................................................. 81 in. (2.05 m)
  Width (mowing) ..................................................................................................... 139 in. (3.53 m)
  Width (transport) .................................................................................................. 93.5 in. (2.37 m)
  Length .................................................................................................................. 144 in. (3.66 m)
  Turning Radius (uncut circle) ...................................................................................... 20 in. (51 cm)
  Wheelbase ......................................................................................................... 67.75 in. (1.72 m)
  Ground Clearance ....................................................................................................... 8 in. (20 cm)



5. ACCESSORIES                                             YES           NO

  Canopy, working lights, headlights and flashers, rear-wheel steering weights



6. WARRANTY
   Please state all warranties




  Name and Model Number: Jacobsen HR 5111
  List all part numbers required for complete assembly.




  Please list items you do not meet specifications on and give complete details of what you are
  offering.




                                                                          38
                                                                                                                  SEVENTEEN

                                                                                                                  Price: $35,875.00
                                                                                                                         TIECO

                                              SPECIFICATIONS FOR A
                                          60 HP 10½ CUT ROTARY MOWER

                          •     Please circle YES if you meet or exceed this specification
                          •     Please circle NO if you do not meet this specification
                          •     Failure to circle YES or NO could disqualify your bid

1. POWERTRAIN                               YES                    NO

  Engine .................................................................. Liquid-cooled Perkins® 4-cylinder Turbo Charged diesel
  Power .......................................................................................................... 60 hp (44 kW) @ 2800 rpm
  Displacement……...................................................................................................... 135.2 cu in (2213 cc)
  Cooling System……………………………………….................................................................... 1.3 gal (4.9 l) capacity
  Oil Capacity. ….................................................................................................................... 8.7 at (8.2 l)
  Fuel Capacity ……. 17 gal. (45.6 l); High Density polyethylene tank; 10-micron in-line prefilter and canister filter
  Hydraulic System and Fluid ….……................................... 5 gal (19 l); 10-micron filter and test ports; 10W-30
  Transmission.................... Servo Controlled variable disaplacment; hydraulic pump directly mounted to engine
  Drive .................................................................... Full-time four-wheel drive; two-wheel drive for transport
  Electrical ………..….……...................................................... 12-volt automotive battery with 40 amp alternator
  Tires………….…………..……………………………………………..Front - 24 x 13-12 tubeless turf; Rear - 20 x 10-8 tubeless turf
  Ground Pressure............................................................................................................................14 psi
  Operating Speeds
  Transport (in two-wheel drive) ................................................................................... 14 mph (22.5 km/h)
  Mowing ....................................................................................................................... 7 mph (11 km/h)
  Reverse ................................................................................................................. 4 mph (7 km/h) max


2. OPERATOR COMFORT, SAFETY AND CONTROL                                                   YES                     NO

  Throttle ............................................................................................................... Console-mounted lever
  Brakes ................................................................................................. Hydrostatic through traction drive
  Parking Brake ................................................................................. Wed hydraulic disc brakes; hand lever
  Speed Control ..................... Foot-pedal variable forward/reverse speeds; individual mow & transport positions
  Console Gauges ................Water temperature, fuel, oil pressure; warning, hydraulic oil temperature, glow plug
  indicator, alternator lamp, hour meter
  Operator Controls ………......... Throttle, Two-wheel/four-wheel drive, PTO on/off, horn, engine start; 3-individual
  deck, Lift levers; wing deck latches
  Deck Lift/Lower ………………….………………………........................................................................... Rocker switch
  Steering …………............................................ Hydrostatic power steering to rear wheels; w/tilt steering wheel
  Seat …………………………………………………..................... Vinyl-covered, high-back, height, back/forward adjustments
  Entry/Exit Steps ................................................................... Left/right steps for safe cockpit entry and exit


3. MOWERS                                   YES                    NO

  Cutting Width.............................................................................................................................. 127 in.
  Cutting Height .............................................................................Operator-adjustable from 1 in. to 4.75 in.
  Cutting Speed…..…………...................................................................................................7 mph (11 km/h)
  Deck Construction ………... 10-gauge steel with welded 7-gauge deck skirts; 1-in.round steel reinforcement wrap
  Deck Drive...................................................................................................... Single L-L poly section belt
  Deck Lift Positions
  Center Deck…..…...................................................................................................... 6 in. lift for transport
  Wing Decks ….................................... Individual controls with full lift and lock to vertical for transport/storage
  Productivity .......................................................................... 6.8 acres/hr. (2.8 ha/hr) at 7 mph (11 km/h)
  Deck Cutting Width


                                                                       39
    Center Deck……………………………………………………….................................................................................. 60 in.
    Wing Decks .................................................................................................................. 40.5 in (103 cm)
    Overall Cutting Width....................................................................................................... 127 in (3.23 m)
    Blades ................................................................................................. Seven; 21 in (53 cm) heat treated
    Spindles...................................................................... 1.25 in (3.2 cm) diameter w/double-sealed bearings


    Anti-Scalp Rollers
    Center Deck …......................................................................................................... Three front; two rear
    Wing Decks.....................................................................................................................Optional wheels
    Center Deck ................................................................................................ Two 11 x 4.0 foam filled tires
    Each Wing Deck............................................................................................. Two 9 x 3.5 foam filled tires
    Weight Transfer System............... Patented system: transfers up to 200 lbs. from mowing decks to tractor for
    improved stability and traction


4. DIMENSIONS                                            YES                    NO

  Transport Width ………………………………………………………………........................................................ 61 in. (155 cm)
   Height ........................................................................................................................... 53 in. (135 cm)
Length with Decks ............................................................................................................. 122 in. (310 cm)
Weight with Decks ……................................................................................................... 3,476 lbs. (1577 kg)
Operator Sound Level ................................................................................................. 92 dB(A) at 2,800 rpm
Certifications ........................................................................................... ANSI B71.4-1990 Safety Standards
European Community Directives and Amendments
Options: Two-post ROPS and canopy


5. WARRANTY

Please state all warranties




Name and Model Number: Jacobsen 6010
List all part numbers required for complete assembly.




Please list items you do not meet specifications on and give complete details of what you are offering.




                                                                        40
                                                                                                           EIGHTEEN

                                                                                                           Price: $56,895.00
                                                                                                                  TIECO

                                             SPECIFICATIONS FOR A
                                      16’ 4-WHEEL DRIVE ROTARY MOWER

                            •    Please circle YES if you meet or exceed this specification
                            •    Please circle NO if you do not meet this specification
                            •    Failure to circle YES or NO could disqualify your bid


1. ENGINE                                             YES           NO

  Model ...................... Detroit Diesel D704LT 4-cylinder, liquid-cooled,turbocharged, direct-injection diesel
  Horsepower (@ 3,000 rpm) ..................................................................................... 87 hp (64.9 kW)
  Air Cleaner ...................... Heavy-duty, centrifugal type with visual service indicator; replaceable element
  Lubrication ........................................................... Pressure-lubricated system; 7.5 qt. (7.1 l) capacity
  Radiator and Oil Cooler ............... Easily removable, mid-mounted air intake grill and shielding for access
  to ag-type radiator; oil cooler swings out for easy service
  Electrical System ................ 12-volt, automotive-type, dual battery; 1,260 CCA, 55-amp alternator; seat
  switch, PTO, parking brake and traction neutral interlock system; overload protection through automotive-type
  fuses and resettable circuit breaker



2. VEHICLE                                            YES           NO

  Traction System ............ Variable-displacement, hydrostatic drive to two high-torque, front-wheel motors
  and two high-torque rear-wheel motors; single foot-operated traction pedal with adjustable speed stop; four-wheel
  drive when mowing; four-wheel-drive reverse on demand
  Steering .............................................. Tilt steering wheel to hydrostatic power steering at rear wheels
  Tires
  Front ......................................................................................... Two 29 x 14.0-15, 12-ply turf tires
  Rear ............................................................................................. Two 24 x 12.0-12, 6-ply turf tires
  Brakes ...................................................... Front enclosed drum brakes; mechanical turn-assist brakes
  through two pedals; hand lever for parking brake; dynamic braking through hydrostatic transmission
  Hydraulic System ................. 55 gal. (208.2 l) system capacity, with 35 gal. (132.5 l) reservoir capacity;
  low oil level warning system; water collection/drain plugs; filtration: 10-micron return filter and 10-micron charge
  system filter
  Speed
  Mowing ................................................................................................... 0 to 8.5 mph (13.7 km/h)
  Transport .................................................................................................. 0 to 20 mph (32.2 km/h)
  Reverse (two-wheel drive) .............................................................................. 0 to 6 mph (9.6 km/h)
  Reverse (four-wheel drive) ............................................................................. 0 to 4 mph (6.4 km/h)
  Indicators ................................. Water temperature and fuel level gauges; hour meter; low hydraulic oil
  level indicator light and audible warning; no battery charge, low engine oil pressure, hydraulic oil filter service and
  glow-plug indicator lights; high engine temperature audible warning
  Controls ...................... Individual deck lift levers, throttle, ignition, PTO switch, four-wheel-drive switch,
  parking brake lever, turn-assist pedals, foot-operated traction pedal, weight transfer dial, steering wheel tilt
  release
  Fuel Capacity ........................................................................................................ 35 gal. (132.5 l)



3. CUTTING DECKS                                      YES          NO

  Size .................................................................... One 92 in. (2.34 m) out-front, multi-flex front deck;
  two 59 in. (1.5 m) swept-forward wing decks


                                                                     41
  Blades
  Front Deck ...................................... Five blades, 21 in. (5.3 m) long; heat-treated and interchangeable
  Wing Deck .................................... Three blades, 21 in. (5.3 m) long; heat-treated and interchangeable
  Overall Cutting Width ............................................................................................. 192 in. (4.88 m)
  Height-of-Cut Range ....................................................................... 1 in. to 5.5 in. (2.5 cm to 14 cm)
  Trimming Ability .................................................................................... 18 in. (45.7 cm) uncut circle
  Caster Wheels ............... Two 13 x 6.5-6, 4-ply, pneumatic (front deck); ten 11 x 4-5.0, 4-ply, pneumatic

4. DIMENSIONS                                              YES         NO

  Weight ........................................................................................................... 6,350 lbs. (2880 kg)
  Height
  Top of Cutting Units Raised ....................................................................................... 94 in. (2.39 m)
  Top of Optional ROPS ............................................................................................... 85 in. (2.16 m)
  Width
  Mowing ................................................................................................................ 198 in. (5.03 m)
  Transport ............................................................................................................... 95 in. (2.41 m)
  Overall Length ...................................................................................................... 174 in. (4.42 m)



5. ACCESSORIES                                             YES          NO

  Two-post ROPS with seat belt and canopy, cruise control



6. WARRANTY
   Please state all warranties




  Name and Model Number: Jacobsen 9016

  List all part numbers required for complete assembly.




  Please list items you do not meet specifications on and give complete details of what you are
  offering.




                                                                          42
                                                                                                                          NINETEEN

                                                                                                                          Price: $29,890.63
                                                                                                                          Jerry Pate Turf

                                                    SPECIFICATIONS FOR A
                                                 FAIRWAY 5-GANG 2WD MOWER

                                •     Please circle YES if you meet or exceed this specification
                                •     Please circle NO if you do not meet this specification
                                •     Failure to circle YES or NO could disqualify your bid


1. ENGINE                                                  YES         NO
   Diesel .............................. Kubota® D1105E 3-cylinder, liquid-cooled diesel rated at 26 hp; pressurized,
   sealed cooling system; dry-type air filter with service indicator; 40-amp alternator
   Fuel System ............................................................................................................ 12 gal capacity

2. VEHICLE                                                       YES         NO
   Traction Drive ...................... Variable-displacement, hydrostatic pump with 2 high-torque wheel motors;
   Travel Speed
   Forward – 2-Wheel Drive ............................................................................................ 0 to 10.5 mph
   Reverse ........................................................................................................................ 0 to 4 mph
   Reel Drive .......................................... Tandem gear pump with 2 solenoid-controlled spool-type valves;
   gear-type hydraulic motors mounted on each reel; pressure-compensated backlapping standard
   Steering ................................................................................ Rear-wheel, hydrostatic power steering
   Lift System ........................................................ Electro-hydraulic system with double-acting cylinders
   lift to cross-cut position only; touch-lift joystick
   Hydraulic System                                                    8 gal capacity; Greens Care biodegradable hydraulic fluid;
   ...................................................................................oil monitor with low-oil audible alarm standard
   Tires
   Front .............................................................. 24 x 13.00-12 tubeless Goodyear Softrac II Terra Tires
   (with special rounded shoulders)
   Rear .................................................................................................. 18 x 9.50-8 tubeless rib-tread
   Brakes
   Service ........................................................................................ Dynamic, through-traction system
   Parking ...................................................................................................................... (2) front disc
   Frame ...................................................... Welded, tubular construction, utilizing Turfcat® 500 chassis
   Styling .......................................... Jacobsen “family appearance,” utilizing a common operator’s station
   Seat ..................................................................... High-back, standard suspension seat with armrests
   Headlights .................................................................................................................. (2) standard
   Mower Weight Transfer ............................................................................ Spring-biased to rear roller

3. DIMENSIONS                                              YES          NO
   Overall Length ................................................................................................ 106" with catchers on
   Overall Height ................................................................... Approximately 56" to top of steering wheel
   Width – Mowing ....................................................................................................................... 88"
   Width – Transport .................................................................................................................... 88"
   Weight – 2-Wheel Drive ............ 2,115 lbs. (less operator), with minimum fuel in tank and mowers raised

4. MOWERS                                                     YES         NO
   Number ..................................................................................................................................... 5
   Width ..................................................................................................................................... 18"
   Overall Cutting Width ........................................................................................... Approximately 80"
   Reel Diameter ........................................................................................................................... 5"
   Height-of-Cut Range ........ 0.30" to 0.70" (up to 15/16" with Hi-Cut kit), using low-profile, heavy bedknife
   Reel ................................. 11-blade, using greens mower section; 8-blade, using fairway mower section
   Reel Speed ............................................................................................... Approximately 2,000 rpm
   Rear Roller ........................... 2" diameter, heavy-duty smooth (shortened to minimize overlap striping);
   roller scraper standard


                                                                              43
  Front Roller Options .................................. 2" diameter groomer-type, grooved front rollers;

5. OPTIONS/ACCESSORIES                      YES               NO
   Two-post ROPS, canopy, deluxe suspension for seat

6. WARRANTY
  Please state all warranties




  Name and Model Number: TORO Reel Master 5200-D 2-wd
  List all part numbers required for complete assembly.




  Please list items you do not meet specifications on and give complete details of what you are
  offering.




                                                               44
                                                                                                                         TWENTY

                                                                                                                         Price: $33,299.42
                                                                                                                         Jerry Pate Turf

  SPECIFICATIONS FOR A
                      FAIRWAY 5-GANG 4WD MOWER

                                •     Please circle YES if you meet or exceed this specification
                                •     Please circle NO if you do not meet this specification
                                •     Failure to circle YES or NO could disqualify your bid

1. ENGINE                                                  YES           NO
   Diesel ............................... Kubota® D1105E 3-cylinder, liquid-cooled diesel rated at 26 hp; pressurized, sealed
   cooling system; dry-type air filter with service indicator; 40-amp alternator
   Fuel System ........................................................................................................... 12 gal capacity

2. VEHICLE                                                       YES           NO
   Traction Drive ....................... Variable-displacement, hydrostatic pump with 2 high-torque wheel motors; 4-
   wheel-drive option available
   Travel Speed
   Forward........................................................................................................................ 0 to 6 mph
   Reverse ....................................................................................................................... 0 to 4 mph
   Mow Speed – 4-Wheel Drive .................................................................................................. 6 mph
   Reel Drive .......................................... Tandem gear pump with 2 solenoid-controlled spool-type valves;
   gear-type hydraulic motors mounted on each reel; pressure-compensated backlapping standard
   Steering ................................................................................ Rear-wheel, hydrostatic power steering
   Lift System ....................................................... Electro-hydraulic system with double-acting cylinders;
   lift to cross-cut position only; touch-lift joystick
   Hydraulic System                                                    8 gal capacity; Greens Care biodegradable hydraulic fluid;
   ...................................................................................oil monitor with low-oil audible alarm standard
   Tires
   Front .............................................................. 24 x 13.00-12 tubeless Goodyear Softrac II Terra Tires
   (with special rounded shoulders)
   Rear .................................................................................................. 18 x 9.50-8 tubeless rib-tread
   Brakes
   Service ........................................................................................ Dynamic, through-traction system
   Parking ...................................................................................................................... (2) front disc
   Frame ...................................................... Welded, tubular construction, utilizing Turfcat® 500 chassis
   Styling ......................................... Jacobsen “family appearance,” utilizing a common operator’s station
   Seat ..................................................................... High-back, standard suspension seat with armrests
   Headlights .................................................................................................................. (2) standard
   Mower Weight Transfer ............................................................................ Spring-biased to rear roller

3. DIMENSIONS                                              YES            NO
   Overall Length ................................................................................................ 106" with catchers on
   Overall Height .................................................................. Approximately 56" to top of steering wheel
   Width – Mowing ....................................................................................................................... 88"
   Width – Transport ................................................................................................................. 88"
   Weight – 4-Wheel Drive ............ 2,200 lbs. (less operator), with minimum fuel in tank and mowers raised

4. MOWERS                                                     YES         NO
   Number ..................................................................................................................................... 5
   Width ..................................................................................................................................... 18"
   Overall Cutting Width ........................................................................................... Approximately 80"
   Reel Diameter ........................................................................................................................... 5"
   Height-of-Cut Range ........ 0.30" to 0.70" (up to 15/16" with Hi-Cut kit), using low-profile, heavy bedknife
   Reel ................................. ………………………………………………………………8-blade, using fairway mower section
   Reel Speed ............................................................................................... Approximately 2,000 rpm
   Rear Roller ......... 2" diameter, heavy-duty smooth (shortened to minimize overlap striping); roller scraper
   standard

                                                                              45
  Front Roller ………………….............................................. 2" diameter groomer-type, grooved front rollers;

5.OPTIONS/ACCESSORIES                      YES              NO
  Two-post ROPS, canopy, deluxe suspension for seat

6. WARRANTY
  Please state all warranties




  Name and Model Number: TORO Reel Master 5200-D 4-wd

  List all part numbers required for complete assembly.




  Please list items you do not meet specifications on and give complete details of what you are
  offering.




                                                               46
                                                                                                                          TWENTY-ONE

                                                                                                                          Price: $5,338.40
                                                                                                                          Jerry Pate Turf


                                                   SPECIFICATIONS FOR A
                                                WALK BEHIND GREENS MOWER

                                •     Please circle YES if you meet or exceed this specification
                                •     Please circle NO if you do not meet this specification
                                •     Failure to circle YES or NO could disqualify your bid


1. ENGINE                                                    YES         NO
  Model .................................................................. Honda® GX-120 K1QX 4-cycle, OHV, air-cooled
  Horsepower ........................................................................................................ 4 hp (2.98 kW)
  Maximum Torque (@ 2,500 rpm) ................................................................... 5.4 ft.-lbs. (7.5 Nm)
  Carburetor .................................................................................. Horizontal-type, butterfly valve
  Fuel Capacity.......................................................................................................0.66 gal. (2.5 l)
  Starter..................................................................................................................... Recoil rope
  Noise Level/Operator’s Ear ........................................................................ 79 dBa (while mowing)

2. TRACTION AND DIFFERENTIAL                                  YES       NO
   Traction Clutch .......................................................................................... Automotive-disc type
   Traction Reduction Ratio ...................................................................................................... 24:1
   Traction and Reel Drives ................................................................Chain drive in oil-tight housing
   Transport Tires. ..........................................................................................Two pneumatic 11 x 4
   Differential. .............................................................................Full automotive type, self-contained
   Rear Drive Rollers ......................................................................... Two machined-aluminum alloy;
   7.75 in. O.D. x 9.8 in. (197 mm x 249 mm)
   Travel Speed (@ 3,000 rpm) .......................................................................... 2.9 mph (4.7 km/h)

3. MOWER                                                      YES       NO
   Type................................................................................................................................. Reel
   Cutting Frequency ..........................................................................................0.205 in. (5.2 mm)
   Reel Clutch ................................................................................................... Separate cog type
   Cutting Width .................................................................................................. 22 in. (559 mm)
   Height of Cut ................................................................. 3/64 in. to 7/16 in. (1.19 mm to 11 mm),
   depending on turf conditions and bedknife installed

4. REELS                                                   YES        NO
   Reel Diameter .................................................................................................... 5 in. (127 mm)
   Reel Shaft Diameter ............................................................................... . . 15/16 in. (23.8 mm)
   Number of Blades .................................................................................................................. 11
   Blade Material .......................................................... Hardened, high-manganese, high-carbon steel
   Reel Bearing .......................................................................... Spring-loaded Timken tapered roller
   Reel Reduction Ratio ........................................................................................................ 2.25:1
   Side Frame Material ...................................................................................... Cast-aluminum alloy

5. BEDKNIVES                                                 YES       NO
   Bedknife Material ....................................................................................... Hardened carbon steel
   High Profile ............................................................................. 5/32 in. (3.97 mm) cutting height
   Low Profile ............................................................... 7/64 in. (2.78 mm) cutting height (standard)
   Tournament ............................................................................. 5/64 in. (1.98 mm) cutting height
   Super Tournament .................................................................... 3/64 in. (1.19 mm) cutting height
   Grass Catchers ....................................................................................................... Polyethylene
   Weight ............................................................................................................ . 178 lbs. (81 kg)
   (All weights on green with catcher and machined-aluminum grooved roller.)



                                                                              47
6. ACCESSORIES                                YES   NO
   Solid front roller, grooved front roller

7. WARRANTY
  Please state all warranties




  Name and Model Number: TORO Green Master 1000

  List all part numbers required for complete assembly.




  Please list items you do not meet specifications on and give complete details of what you are
  offering.




                                                         48
                                                                                                                       TWENTY-TWO

                                                                                                                       Price: $8,060.69
                                                                                                                       Jerry Pate Turf

                                         SPECIFICATIONS FOR A 22”
                                    Walk Behind Floating Head Greens Mower

                    • Please circle YES if you meet or exceed this specification.
                    • Please circle NO if you do not meet this specification.
                    • Failure to circle YES or NO could disqualify your bid.

1. ENGINE                                                      YES        NO
   Model .......................................................... 1-cylinder, overhead-valve Honda® GX-120 K1QX gas
   Maximum Rated Horsepower (@ 3,600 rpm) .............................................................. 4 hp (2.98 kW)
   Displacement .................................................................................................... 7.3 cu. in. (119 cc)
   Bore and Stroke .......................................................................... 2.4 in. x 1.7 in. (60 mm x 42 mm)
   Cooling ...................................................................................................... Air-cooled
   Air Filter .............................................................................................................................. Dual-element
   Torque (@ 2,800 rpm) ..................................................................................................... 5.4 ft-lb (7.5 Nm)
   Starter ........................................................................................................................... Recoil rope-type
   EC-Guaranteed Sound Power Level ................................................................................................ 100 dBA
   Fuel Capacity ............................................................................................................. 0.66 U.S. gal. (2.5 l)

2. TRACTION SYSTEM                                            YES       NO
   Drive Clutch ............................................................................................................................... Disc-type
   Traction and Reel Drive ..................................................................................................... Steel spur gears
   Mowing Speed (@ 3,000 rpm) ...................................................................................... 2.9 mph (4.68 km/h)
   Traction Reduction Ratio ............................................................................................................... 21.14:1
   Differential ............................................................................... Full automotive-type; housed in traction drum
   Rear Drive Rollers ................................. Aluminum-alloy castings; 6.93 in. (176 mm) O.D. x 10.5 in. (267 mm) L
   Transport Tires ......................... Two bi-directional, pneumatic, 12.7 in. x 4 in. (322.6 mm x 104.1 mm)
   Operator Presence Control (OPC)................................. Integral OPC/clutch design; controls reel and traction
   drive


3. MOWER                                                      YES       NO
   Type ............................................................................................................................................. Reel
   Number of Blades .................................................................................................................................9
   Reel Clutch .................................................................................................................... Separate cog-type
   Frequency of Cut .................................................................. 0.065 in @ 1 mph walk speed (1.03 mm 1 km/h)
   Width of Cut ................................................................................................................ 22 in. (557.5 mm)
   Reel Diameter ................................................................................................................. 4 in. (101.6 mm)
   Reel Shaft Diameter ........................................................................................................... 1 in. (25.4 mm)
   Blade Material .......................................................................................................................... Alloy steel
   Reel Bearing ....................................................................................................................... Tapered roller
   Reel Reduction Ratio ...................................................................................................................... 1.74:1
   Side-Frame Material................................................................................................. Aluminum-alloy casting
   Catcher .................................................................................................................... Acrylic vinyl chloride


4. BEDKNIVES                                              YES NO
   Bedknife Material ................................................................................................................ Alloy tool steel
   Blade Type Thickness Height of Cut Range
   Standard Blade 1/16 in (1.5 mm) 5/64 in. & below to 25/64 in. (1.9 mm to 10.0 mm)
   Option 13/64 in. (5 mm) 3/16 in. & below to 25/64 in. (4.8 mm to 10.0 mm)




                                                                            49
5. DIMENSIONS                                                 YES NO
   Length ........................................................................................................50 in. (1270 mm), with catcher
   Height ....................................................................................................................... 46.5 in. (1000 mm)
   Width (with tires) ........................................................................................................... 36.5 in (930 mm)
   Width (without tires) ......................................................................................................... 35 in. (930 mm)


6. WEIGHT                                                     YES       NO
   Overall ........................................................................................................................ 206 lbs. (93.5 kg)
   With Groomer Kit .......................................................................................................... 215 lbs. (97.5 kg)
   (All weights on green with catcher and roller)
   Transport Tires ................................................................................................................. 15.5 lbs. (7 kg)


7. GROOMERS:                                                YES      NO
 Turf Groomers Installed

8. WARRANTY:
 Please state all warranties




  Name and Model Number: TORO Green Master Flex 21

  List all part numbers required for complete assembly.




  Please list items you do not meet specifications on and give complete details of what you are
  offering.




                                                                            50
                                                                                                                  TWENTY-THREE

                                                                                                                  Price: $19,459.00
                                                                                                                         TIECO

                                               SPECIFICATIONS FOR A
                                             4-WHEEL TURF TRUCKSTER
                                              4-SPEED MANUAL, DIESEL

                          •     Please circle YES if you meet or exceed this specification
                          •     Please circle NO if you do not meet this specification
                          •     Failure to circle YES or NO could disqualify your bid

1. STANDARD FEATURES                                   YES                     NO

  Orange; heavy-duty, carbon-steel channel frame; one-piece polyethylene, dent-resistant, rustproof front body;
  front storage area with hinged and latched polyurethane hood; fuel gauge; tachometer; hour meter;
  temperature gauge; low oil pressure light; low brake fluid light; voltmeter; governor and hand throttle
  controls; light switch; horn; keyed ignition switch; phone/cup holder; 12-volt power-plug outlet; glove box
  area; bucket-type, high-back seats with ergonomically placed hand and foot controls; open floor area;
  Cushman® pin disconnect system; hydraulic system with bed-lift cylinder and auxiliary power outlets; parking
  brake light; headlights; taillight and brake light; hip restraints; hand-hold; power steering; hi/low option pump
  5 G.P.M./9 G.P.M.


2. POWER                                               YES                     NO

   Diesel Model
  Engine ................................................................ Perkins® 103-10 diesel, 3-cylinder, 4-cycle, liquid-cooled
  Horsepower (@ 3,200 rpm) .......................................................................................... 22.3 hp (16.6 kW)
  Horsepower (max. @ 3,600 rpm) .................................................................................. 23.5 hp (17.5 kW)
  Torque (@ 2,900 rpm) ............................................................................................................. 39 ft.-lbs.
  Displacement ........................................................................................................... 58.2 cu. in. (954 cc)
  Oil Capacity ...................................................................................................................... 3.7 qt. (3.5 l)
  Governor Type ...................................................................................................... Mechanical centrifugal
  Air Cleaner ............................................................ Self-cleaning centrifugal precleaner with paper cartridge
  Lube Oil Filter ............................................................................................ Full flow with spin-on oil filter
  Lubrication ........................................................................................................ Full-pressure lubrication
  Starting System .............................................................................................................. 12-volt starter
  Fuel Type ............................................................................................................... Diesel ASTM no. 2-D
  Fuel Capacity .................................................................................................... 6.5 gal. in polyolefin tank
  Fuel Filter .......................................................................................... Prefilter, water separator, final filter



3. PAYLOAD CAPACITY                                    YES                     NO

  Rated Capacity ............................ 2,850 lbs. (1293 kg), includes 200 lbs. for each operator, passenger and
  box


4. DRIVETRAIN                                          YES                     NO

  Clutch
  Diesel Models 7.1 in. (180 mm), dry, single disc and pressure plate
  Transmission
  Manual ........................................ Four-speed truck manual transmission with low-low (creeper) first gear;
  synchronized in all forward gears



                                                                       51
5. ELECTRICAL SYSTEM                                      YES                    NO

    Preheat
    Diesel Model .................... Automatic glow-plug activation before ignition; instrument panel light indicates
    when glow plugs are heating the combustion chambers


6. STEERING                                               YES                    NO

    Automotive power steering


7. SUSPENSION                                             YES                    NO

    Front .............................................. Double A-arm independent suspension with spring-over shock absorbers
    Rear ....................................................................... Heavy-duty, multiple leaf springs with shock absorbers


8. SEATS                                                  YES                    NO

    Two contoured, bucket-type seats with hip restraints and hand-holds


9. BRAKES                                          YES                NO
    Service ............................. Heavy-duty, hydraulic, 7.9 in. (200 mm) duo-servo, self-adjusting brakes on all
    wheels, with dual master cylinder and remote trunk-mounted master cylinder reservoir


10. TIRES                                                YES                      NO
    Front .......................................................................................................... 20 x 10-10, 4-ply rib tread
    Rear .......................................................................................................... 24 x 13-12, 4-ply turf tread



11. REAR AXLE                                YES                NO
    Diesel Models: 11.16:1 ratio, two-speed transaxle; 7.1 in. (180mm) hypoid ring gear; bevel differential gears;
    integral 3.2:1 auxiliary gear set; semi-floating axles with splined five-bolt wheel hubs; heavy-duty wheel
    bearings


12. DIMENSIONS                                            YES                    NO

      Ground Clearance ....................................................................................................... 7.5 in. (190 mm)
      Overall Height .............................................................................................................. 50.5 in. (1.3 m)
      Overall Height with ROPS and Cab .................................................................................. 74.7 in. (1.9 m)
      Overall Length ........................................................................................................... 114.2 in. (2.9 m)
      Overall Width .............................................................................................................. 63.5 in. (1.6 m)
      Inside Clearance Circle …………………………………………………............................................................ 41 in. (1 m)
      Outside Clearance Circle ........................................................................................... 20 ft. 2 in. (6.1 m)
      Wheelbase .................................................................................................................. 88.2 in. (2.2 m)
      Wheel Tread ................................................................................................................ 50.6 in. (1.3 m)
      Front ............................................................................................................................. 42 in. (1.1 m)
      Rear .............................................................................................................................. 56 in. (1.3 m)
      Weight
      Diesel .................................................................................................................... 1,604 lbs. (727 kg)


13. PERFORMANCE                                           YES                    NO


      22.3 hp Diesel 3,200 rpm: 1st 1.7 (2.8) 5.5 (8.8); 2nd 3.2 (5.2) 10.3 (16.5); 3rd 4.4 (7.1) 14.1 (22.6); 4th
      6.3 (10.1) 20 (32.2)

                                                          YES                    NO



                                                                         52
14.   60” hydraulically power flatbed and steel boxes, 4-post metal cab with seat belts, windshield with wipers &
      back glass (safety) both with flip-open latches

                                               YES               NO
15.    Capable to install quick aerator, core harvester, top dresser, Vicon spreader, GA-60 with 5th wheel hitch and
       Envirojet 160 gallon sprayer, capable of towing 1,500 to 4,500 lbs with 5th wheel hitch.


      16. WARRANTY


      Please state all warranties




Name and Model Number: Cushman Truckster (manual) (diesel)
List all part numbers required for complete assembly.




Please list items you do not meet specifications on and give complete details of what you are offering.




                                                         53
                                                                                                                  TWENTY-FOUR

                                                                                                                  Price: $18,883.00
                                                                                                                         TIECO
                                               SPECIFICATIONS FOR A
                                             4-WHEEL TURF TRUCKSTER
                                             AUTOMATIC TRANSMISSION

                          •     Please circle YES if you meet or exceed this specification
                          •     Please circle NO if you do not meet this specification
                          •     Failure to circle YES or NO could disqualify your bid



1. STANDARD FEATURES                                   YES                     NO

  Orange; heavy-duty, carbon-steel channel frame; one-piece polyethylene, dent-resistant, rustproof front body;
  front storage area with hinged and latched polyurethane hood; fuel gauge; tachometer; hour meter;
  temperature gauge; low oil pressure light; low brake fluid light; voltmeter; governor and hand throttle
  controls; light switch; horn; keyed ignition switch; phone/cup holder; 12-volt power-plug outlet; glove box
  area; bucket-type, high-back seats with ergonomically placed hand and foot controls; open floor area;
  Cushman® pin disconnect system; hydraulic system with bed-lift cylinder and auxiliary power outlets; parking
  brake light; headlights; taillight and brake light; hip restraints; hand-hold; power steering; hi/low option pump
  5 G.P.M./9 G.P.M.


2. POWER                                               YES                     NO

  32 hp Gas Model
  Engine ......................... Suzuki® 660 EFI, 3-cylinder, 4-cycle, 12-valve, liquid-cooled, electronic fuel injection
  Horsepower (@ 4,450 rpm) ............................................................................................ 32 hp (23.1 kW)
  Horsepower (max. @ 6,000 rpm) ................................................................................. 50.3 hp (37.5 kW)
  Torque (@ 3,550 rpm) .......................................................................................................... 44.7 ft.-lbs.
  Displacement. .......................................................................................................... 40.1 cu. in. (657 cc)
  Oil Capacity ...................................................................................................................... 3.3 qt. (3.1 l)

3. SPECIFICATIONS                                      YES                     NO

  Governor Type ................................................................. Mechanical centrifugal (Cushman® ground speed
  governor)
  Air Cleaner ............................................................ Self-cleaning centrifugal precleaner with paper cartridge
  Lube Oil Filter ............................................................................................. Full flow with spin-on oil filter
  Lubrication ......................................................................................................... Full-pressure lubrication
  Starting System ............................................................................................................... 12-volt starter
  Fuel Type ........................................................................................................ Unleaded regular gasoline
  Fuel Capacity .................................................................................................... 6.5 gal. in polyolefin tank
  Fuel Filter .............................................................................. 30-micron prefilter and 10-micron final filter


4. PAYLOAD CAPACITY                                    YES                     NO

  Rated Capacity .......................... 2,850 lbs. (1293 kg), includes 200 lbs. for each operator, passenger and box


5. DRIVETRAIN                                          YES                     NO

  Clutch
  EFI Model .................................................................. 6.7 in. (170 mm), dry, single disc and pressure plate
  Transmission


                                                                       54
   Automatic ..................................... Three-speed automotive automatic transmission with reverse gear weight
   Gear Selector Dash-mounted, right-hand shifter


6. ELECTRICAL SYSTEM                                    YES                    NO

   Charging
   32 hp Gas Model 55-amp, heavy-duty alternator
   Lights ................................................................... Two sealed high/low-beam headlights; stoplight/taillight
   Warning System .............................. Thermal sensing-activating warning buzzer indicates engine overheating

7. STEERING                                             YES                    NO

   Automotive power steering


8. SUSPENSION                                           YES                    NO

   Front .............................................. Double A-arm independent suspension with spring-over shock absorbers
   Rear ....................................................................... Heavy-duty, multiple leaf springs with shock absorbers


9. SEATS                                                YES                    NO

   Two contoured, bucket-type seats with hip restraints and hand-holds


10. BRAKES                                              YES                    NO

    Service ..... Heavy-duty, hydraulic, 7.9 in. (200 mm) duo-servo, self-adjusting brakes on all wheels, with dual
    master cylinder and remote trunk-mounted master cylinder reservoir


11. TIRES                                               YES                    NO

    Front ........................................................................................................... 20 x 10-10, 4-ply rib tread
    Rear ........................................................................................................... 24 x 13-12, 4-ply turf tread




12. REAR AXLE                                YES               NO
    32 hp Gas Model: 14.21:1 ratio, two-speed transaxle; 7.1 in. (180 mm) hypoid ring gear; bevel differential
    gears; integral 3.2:1 auxiliary gear set; semi-floating axles with splined five-bolt wheel hubs; heavy-duty
    wheel bearings



13. DIMENSIONS                                          YES                    NO

    Ground Clearance ....................................................................................................... 7.5 in. (190 mm)
    Overall Height .............................................................................................................. 50.5 in. (1.3 m)
    Overall Height with ROPS and Cab .................................................................................. 74.7 in. (1.9 m)
    Overall Length ........................................................................................................... 114.2 in. (2.9 m)
    Overall Width ............................................................................................................... 63.5 in. (1.6 m)
    Inside Clearance Circle ....................................................................................................... 41 in. (1 m)
    Outside Clearance Circle ........................................................................................... 20 ft. 2 in. (6.1 m)
    Wheelbase .................................................................................................................. 88.2 in. (2.2 m)
    Wheel Tread ................................................................................................................ 50.6 in. (1.3 m)
    Front ............................................................................................................................. 42 in. (1.1 m)
    Rear .............................................................................................................................. 56 in. (1.3 m)
    Weight
    32 hp Gas, Automatic ............................................................................................... 1,619 lbs. (734 kg)




                                                                       55
14. PERFORMANCE                              YES               NO

      3-Speed Automatic
      32 hp Gas, 4,450 rpm 1st 2.5 (3.4) 8 (10.7); 2nd 4.4 (6) 14.2 (19); 3rd 6.8 (11) 21.8 (35.1)


                                             YES               NO

15.      60” hydraulically power flatbed and steel boxes, 4-post metal cab with seat belts, windshield with wipers &
         back glass (safety) both with flip-open latches


                                             YES               NO

16.      Capable to install quick aerator, core harvester, top dresser, Vicon spreader, GA-60 with 5th wheel hitch
         and Envirojet 160 gallon sprayer, capable of towing 1,500 to 4,500 lbs with 5th wheel hitch.



17.       WARRANTY

      Please state all warranties




Name and Model Number: Cushman Truckster (Automatic) (gas
List all part numbers required for complete assembly.




Please list items you do not meet specifications on and give complete details of what you are offering.




                                                         56
                                                                                                                  TWENTY-FIVE

                                                                                                                  Price: $16,983.00
                                                                                                                         TIECO
                                             SPECIFICATIONS FOR A
                                           4-WHEEL TURF TRUCKSTER
                                        4-SPEED MANUAL TRANSMISSION

                          •     Please circle YES if you meet or exceed this specification
                          •     Please circle NO if you do not meet this specification
                          •     Failure to circle YES or NO could disqualify your bid


1. STANDARD FEATURES                                   YES                     NO

  Orange; heavy-duty, carbon-steel channel frame; one-piece polyethylene, dent-resistant, rustproof front body;
  front storage area with hinged and latched polyurethane hood; fuel gauge; tachometer; hour meter;
  temperature gauge; low oil pressure light; low brake fluid light; voltmeter; governor and hand throttle
  controls; light switch; horn; keyed ignition switch; phone/cup holder; 12-volt power-plug outlet; glove box
  area; bucket-type, high-back seats with ergonomically placed hand and foot controls; open floor area;
  Cushman® pin disconnect system; hydraulic system with bed-lift cylinder and auxiliary power outlets; parking
  brake light; headlights; taillight and brake light; hip restraints; hand-hold; power steering; hi/low option pump
  5 G.P.M/9 G.P.M.


2. POWER                                               YES                     NO

  32 hp Gas Model
  Engine ...................................... Suzuki® 660 EFI, 3-cylinder, 4-cycle, 12-valve, liquid-cooled, electronic fuel
  injection
  Horsepower (@ 4,450 rpm) ............................................................................................. 32 hp (23.1 kW)
  Horsepower (max. @ 6,000 rpm) …………………………………………………………….............................. 50.3 hp (37.5 kW)
  Torque (@ 3,550 rpm) .......................................................................................................... 44.7 ft.-lbs.
  Displacement. ……………………………………………………………...................................................... 40.1 cu. in. (657 cc)
  Oil Capacity ...................................................................................................................... 3.3 qt. (3.1 l)


3. SPECIFICATIONS                                      YES                     NO

  Governor Type ................................................................. Mechanical centrifugal (Cushman® ground speed
  governor)
  Air Cleaner ……………………………………………………………......... Self-cleaning centrifugal precleaner with paper cartridge
  Lube Oil Filter …………………………………………………………….......................................... Full flow with spin-on oil filter
  Lubrication …………………………………………………………....................................................... Full-pressure lubrication
  Starting System ............................................................................................................... 12-volt starter
  Fuel Type ........................................................................................................ Unleaded regular gasoline
  Fuel Capacity .................................................................................................... 6.5 gal. in polyolefin tank
  Fuel Filter .............................................................................. 30-micron prefilter and 10-micron final filter


4. PAYLOAD CAPACITY                                    YES                     NO

  Rated Capacity ...................... 2,850 lbs. (1293 kg), includes 200 lbs. for each operator, passenger and box


5. DRIVETRAIN                                          YES                     NO

  Clutch
  EFI Model ............... 6.7 in. (170 mm), dry, single disc and pressure plate
  Transmission


                                                                       57
    Manual ................. Four-speed truck manual transmission with low-low (creeper) first gear; synchronized in all
    forward gears

6. ELECTRICAL SYSTEM                                     YES                    NO

    Charging
    32 hp Gas Model 55-amp, heavy-duty alternator
    Lights ................................................................... Two sealed high/low-beam headlights; stoplight/taillight
    Warning System .............................. Thermal sensing-activating warning buzzer indicates engine overheating


7. STEERING                                              YES                    NO

    Automotive power steering


8. SUSPENSION                                            YES                    NO

    Front .............................................. Double A-arm independent suspension with spring-over shock absorbers
    Rear ....................................................................... Heavy-duty, multiple leaf springs with shock absorbers


9. SEATS                                                 YES                    NO

    Two contoured, bucket-type seats with hip restraints and hand-holds


10. BRAKES                                YES             NO
    Service ……Heavy-duty, hydraulic, 7.9 in. (200 mm) duo-servo, self-adjusting brakes on all wheels, with dual
    master cylinder and remote trunk-mounted master cylinder reservoir


11. TIRES                                                YES                      NO
    Front ........................................................................................................... 20 x 10-10, 4-ply rib tread
    Rear ........................................................................................................... 24 x 13-12, 4-ply turf tread




12. REAR AXLE                                            YES                    NO

      32 hp Gas Model: 14.21:1 ratio, two-speed transaxle; 7.1 in. (180 mm) hypoid ring gear;
      bevel differential gears; integral 3.2:1 auxiliary gear set; semi-floating axles with splined five-bolt wheel hubs;
      heavy-duty wheel bearings

13. DIMENSIONS                                           YES                      NO
    Ground Clearance ....................................................................................................... 7.5 in. (190 mm)
    Overall Height .............................................................................................................. 50.5 in. (1.3 m)
    Overall Height with ROPS and Cab .................................................................................. 74.7 in. (1.9 m)
    Overall Length ........................................................................................................... 114.2 in. (2.9 m)
    Overall Width ............................................................................................................... 63.5 in. (1.6 m)
    Inside Clearance Circle ....................................................................................................... 41 in. (1 m)
    Outside Clearance Circle ............................................................................................ 20 ft. 2 in. (6.1 m)
    Wheelbase .................................................................................................................. 88.2 in. (2.2 m)
    Wheel Tread ................................................................................................................ 50.6 in. (1.3 m)
    Front ............................................................................................................................. 42 in. (1.1 m)
    Rear .............................................................................................................................. 56 in. (1.3 m)
    Weight
    32 hp Gas, Manual ................................................................................................... 1,572 lbs. (713 kg)

14. PERFORMANCE                                          YES                    NO

      Four-Speed Manual: 1st 1.7 (2.7) 5.4 (8.7); 32 hp Gas, 4,450 rpm 2nd 2.9 (4.7) 9.3 (14.9); 3rd 4.6 (7.5)
      14.9 (23.9); 4th 6.8 (11) 21.8 (35.1)



                                                                         58
                                              YES               NO

15.   60” HYDRAULICALLY POWER FLATBED AND STEEL BOXES, 4-post metal cab with seat belts, windshield with
      wipers & back glass (safety) both with flip-open latches

                                              YES               NO

      16.   Capable to install quick aerator, core harvester, top dresser, Vicon spreader, GA-60 with 5th wheel hitch
            and Envirojet 160 gallon sprayer, capable of towing 1,500 to 4,500 lbs with 5th wheel hitch.


      17.   WARRANTY



      Please state all warranties




Name and Model Number: Cushman Truckster (manual) (gas)
List all part numbers required for complete assembly.




Please list items you do not meet specifications on and give complete details of what you are offering.




                                                          59
                                                                                                        TWENTY-SIX

                                                                                                        Price: $15,239.00
                                                                                                        Huntsville Tractor
                                                                                                        and Equipment
                                             SPECIFICATIONS FOR A
                                         26 HP, DIESEL, 4 WHEEL DRIVE
                                        OUTFRONT MOWER W/72” DECK


                           •    Please circle YES if you meet or exceed this specification
                           •    Please circle NO if you do not meet this specification
                           •    Failure to circle YES or NO could disqualify your bid


1. ENGINE                                            YES          NO

  Kubota® D1105-EB 4-cycle, 3-cylinder, liquid-cooled, low emissions-certified diesel; 26 hp (19.4 kW)
  Cooling ......... Pressurized, sealed cooling system; system monitor; coolant capacity: 6.8 qt. (6.4 l)
  Lubrication ................................ Full-pressure system with full-flow oil filter; oil capacity: 3.5 qt. (3.3 l)



2. VEHICLE                                           YES         NO

  Transmission
  Four-Wheel Drive ............... Variable-displacement hydraulic pump directly mounted to engine;
  full-time four-wheel-drive control; front and rear wheel motors
  Speed
  Transport Four-Wheel Drive ..................... 0 to 10 mph (16 km/h)
  Mowing ................................................... 0 to 6 mph (9.7 km/h)
  Reverse Four-Wheel Drive ......................... 0 to 4 mph (6.4 km/h)
  Hydraulic System ..................... Separate 3 gal. (11.3 l) reservoir; full-flow filter with oil cooler
  Brakes ....... Foot-operated, mechanical, drum-style service brakes; foot pedal-actuated parking brake
  Steering ................................................ Hydraulic power steering
  Seat .............................................. High-back, vinyl-covered; 5 in. (12.7 cm) fore and aft adjustment
  Tires
  Front .............................................. 23 x 10.50, 4-ply, turf tread
  Rear ................................................. 18 x 8.50, 4-ply, turf tread
  Bumper ....................... Standard rear bumper and weight bracket with tie-down holes
  Controls .............................. Key-operated ignition, hand throttle, deck lift lever; forward/reverse
  foot pedal with safety interlock, cutter deck switch, brake pedal
  Instruments .................... Fuel gauge, engine temperature gauge, hour meter, oil pressure light, alternator light



3. ROTARY MOWER DECKS                                YES          NO

  Construction .................. 11-gauge steel with 7-gauge side skirts
  Drive
  Hydraulic PTO ............................. Hydraulic gear pump and motor with electro-hydraulic control valve
  Spindles ......................... Top-mounted, 1 in. (25.4 mm) diameter shaft on maintenance-free ball bearings in
  machined housing
  Caster Wheels ........... Two 11 x 4.00-5 pneumatic, tubeless, 4-ply
  Weight Transfer .................................. Transfers 180 lbs. (82 kg) from cutting deck to tractor
  Height of Cut .................... 1 in. to 4.75 in. (25.4 mm to 121 mm) in 0.25 in. (6 mm) increments




                                                                  60
4. POWER UNIT DIMENSIONS                                  YES         NO

  Width ...................................................................52 in. (1.3 m)
  Length ................................................................ 88 in. (2.2 m)
  Weight
  Four-Wheel Drive ..........................................1,559 lbs. (707 kg)
  Height (top of seat) ......................................... 52.5 in. (1.33 m)
  Wheelbase ......................................................... 52 in. (1.32 m)
  Front-Wheel Tread .............................................. 41 in. (1.04 m)
  Rear-Wheel Tread .............................................. 40 in. (1.01 m)
  Ground Clearance
  Four-Wheel-Drive Models ................................. 6.5 in. (16.5 cm)
  Turning Radius
  Four-Wheel-Drive Models .................................. 12 in. (30.5 cm)



5. MOWER DECK SPECIFICATIONS                              YES               NO

  Anti-Scalp Rollers
  All Rotaries .............................................. Eight 3 in. (7.6 cm)
  Productivity Rate, per Hour at 5.5 mph (9 km/h)
  72 in. ................................................. Up to 4 acres (1.6 ha)
  Height of Cut
  All Rotaries ...................... 1 in. to 4.75 in. (2.5 cm to 12.1 cm) in 0.25 in. (6 mm) increments
  Blades
  72 in. - Three 25 in. (63.5 cm) x 0.25 in. (6.35 mm) thick
  three 24 in. (60.7 cm) x 0.134 in. (3.4 mm) thick
  Width (chute down)
  72 in. Side Discharge ..................................... 85.5 in. (2.2 m)
  Weight
  72 in. Side Discharge ................................... 505 lbs. (229 kg)



6. ACCESSORIES                                            YES              NO

  Rollover protection structure (ROPS) with seat belt, deluxe suspension seat with canopy



7. WARRANTY
   Please state all warranties




  Name and Model Number: Kubota F-3060 w/rc-f 30 deck
  List all part numbers required for complete assembly.



  Please list items you do not meet specifications on and give complete details of what you are
  offering.




                                                                         61
                                                                                 TWENTY-SEVEN


                                                                                 Price: $14,625.00
                                                                                        TIECO

                               Specifications For A
                          84” Cut, 16 HP Gas Reel Mower


      •   Please circle YES if you meet or exceed this specification.
      •   Please circle NO if you do not meet this specification.
      •   Failure to circle YES or NO could disqualify your bid.

                                       YES              NO

1.    ENGINE………………………..…...Briggs & Stratton Vanguard 16 HP twin cylinder, electric start, ducted air flow

                             YES          NO
2.    TRANSMISSION…………………………………………………..Eaton Model 11 variable displacement hydrostatic pump

                             YES        NO
3.    DRIVE MOTOR……………………………………………………………………………………Eaton T series geroler hydraulic motor

                             YES        NO
4.    STEERING………………………………………………………………………………………………………………………Eaton Power Steering

                             YES        NO
5.    OIL TANK…………………………………………………………………………………………………………………………………………..5 gallons

                             YES        NO
6.    GAS TANK…………………………………………………………………………………………………………………………………………..5 gallons

                            YES        NO
7.    FRAME…………………………………………………………………………………………………………Welded tubular steel construction

                             YES        NO
8.    MOWING SPEED…………………………………………………………………………………………………………………………….0 – 7 mph

                              YES        NO
9.    TRANSPORT SPEED………………………………………………………………………………………………………………………………7 mph

                              YES        NO
10.   REVERSE SPEED…….…………………………………………………………………………………………………….3 mph approximately

                             YES        NO
11.   TIRES…………………………………………………………………………………….full pneumatic, front – 16/650 x 8; rear 8 x 12

                            YES        NO
12.   WEIGHT……………………………………………………………………………………………………………………………………….…….1150 lbs

                                          YES                 NO
13.   CONTROLS……………...Foot-operated traction pedal for forward & reverse; hand-operated throttle & choke
      controls; free wheeling tow valve; electric clutch for cutting units, hand-operated parking brake

                                  YES              NO
14.   CUTTING UNITS………..…Three 30” power-driven units free floating to follow ground contours with dial-a-
      height adjusters


                                                  62
                                YES        NO
15.      REEL…………………………………………………………………………………………………….8” diameter; 6 alloy blades; 310” long

                                 YES         NO
16.      REEL BEARINGS………………………………………………….Timken tapered roller bearings on reel shaft; adjustable


                                 YES        NO
17.      BED KNIFE………………………………………………………………………….……..13/64” x 2” with upturned lip of alloy steel

                                 YES        NO
18.      WIDTH OF CUT………………………………………………………………………………………………………………………………………….84”

                                YES        NO
19.      HOC….……………………………………………………………………………………………………………..5/8” to 2 ¼”” reel to bed knife

                                YES        NO
20.      CAPACITY………………………………………………………………………………………………………………………...3 ½ acres per hour

21.      WARRANTY
         One year warranty




Name and Model Number: NATIONAL 8400


List all parts required for complete assembly:




Please list items you do not meet specifications on and give complete details of what you are offering.




                                                         63
                                                                               TWENTY-EIGHT

                                                                               Price: $12,991.00
                                                                                      TIECO

                              Specifications For A
                         70” Cut, 16 HP Gas Reel Mower


      •   Please circle YES if you meet or exceed this specification.
      •   Please circle NO if you do not meet this specification.
      •   Failure to circle YES or NO could disqualify your bid.
                                      YES              NO

1.    ENGINE………………………………Briggs & Stratton Vanguard 16 HP twin cylinder, electric start, ducted air flow

                                      YES              NO

2.    TRANSMISSION……………………………………………………Eaton Model 11 variable displacement hydrostatic pump

                                      YES              NO

3.    WHEEL MOTORS……………………………………………….…………….Char-lynn Low Speed – High Torque 2000 Series

                                      YES              NO

4.    STEERING……………………………………………………………………………………………………………………………..U-shaped wheel

                                      YES              NO

5.    OIL TANK………………………………………………………………………………………………………………………………………..5 gallons

                                      YES              NO

6.    GAS TANK……………………………………………………………………………………………………………………………………….5 gallons

                                      YES              NO

7.    FRAME…………………………………………………………………………………………………….7-gauge welded steel construction

                                      YES              NO

8.    MOWING SPEED……………………………………………………………………………………………………………..0 – 6 mph variable

                                      YES              NO

9.    TRANSPORT SPEED……………………………………………………………………………………………………………………………7.3 mph

                                      YES              NO

10.   REVERSE SPEED…………………………………………………………………………………………………………….………..2 mph approx.

                                      YES              NO

11.   TIRES……………………………………………………………………….Full pneumatic, front – 20-10 x 8; rear – 18 x 8.5 x 8

                                      YES              NO

12.   WEIGHT…………………………………………………………………………………………………………………………..………………….1185 lbs


                                                 64
                                             YES               NO

13.     CONTROLS……….Foot-operated traction pedal for forward & reverse; hand-operated throttle and choke
        controls; free wheeling tow valve; electric clutch for cutting units; hand-operated parking brake; foot-
        operated hydraulic lift with auto stop/start feature
                                             YES                NO

14.     CUTTING UNITS…………………………..Three 25” power-driven units free floating to follow ground contours

                                             YES               NO

15.     REEL…………………….7” diameter, 6 blade alloy blades with grooved front rollers and solid steel back rollers

                                             YES               NO

16.     REEL BEARINGS………………………………………………..…Timken tapered roller bearings on reel shaft, adjustable

                                             YES               NO

17.      BED KNIFE…………………………………………………….……………………………13/64” x 2” with upturned lip of alloy steel

                                             YES               NO

18.      WIDTH OF CUT……………………………………………………………………………………………………………………………………………70”

                                             YES               NO

19.     HOC…………………………………..…………………………………………………………………………………..1/2” to 2” reel to bed knife

                                             YES               NO

20.      CAPACITY…………………………………………………………………………………………………………..………………1¾ acres per hour

                                             YES               NO

21.      GRASS CATCHERS


22.     WARRANTY

         Free pick-up and delivery to Authorized Service Center for 1 year.

Name and Model Number: NATIONAL HYDRO

List all part numbers required for complete assembly:




Please list items you do not meet specifications on and give complete details of what you are offering.




                                                         65
                                                                                    TWENTY-NINE

                                                                                    Price: $23,950.00
                                                                                           TIECO

                               SPECIFICATIONS FOR A
                                7.2 Cubic Yard Sweeper


     •   Please circle YES if you meet or exceed this specification.
     •   Please circle NO if you do not meet this specification.
     •   Failure to circle YES or NO could disqualify your bid.

1.   POWER TRAIN

     540-RPM Tractor PTO Input (Minimum 40 hp); Dual constant Velocity drive shaft from tractor to Big Vac;
     5 V-belt drive to vacuum fan; Multiple V-belt drive to hydraulic pump; 1 ½” diameter hardened steel
     blower drive shaft; 1 ½” diameter hardened steel jackshaft; Hydraulic power to drive motors on Sweeper-
     Vac head; Hydraulic fluid capacity: 10 gallon (38 liters); Remote lubrication system


2.   HOPPER

     7.2 Cubic yards (6.5 cu meters); steel framework; ABS Composite sides with slick finish interior; Tapered
     front to back for easy dumping; Hydraulic dump from tractor hydraulics; Independent of fan operation


3.   DIMENSIONS

     Length………………………………………………………………………………………………………………………….180” (458 cm)
     Width………………………………………………………………………………………………………………………………84” (214 cm)
     Height…………………………………………………………………………………………………………………………….87” (221 cm)

4.   SOUND LEVEL

     92 dba at driver’s location


5.   SAFETY

     Safety engineered; designed and built in accordance with all acceptable ANSI, CE and ASAE standards


6.   VACUUM

     34” (86 cm) diameter, 8 blade vacuum fan; high strength steel vacuum fan housing with replaceable high
     wear liner

7.   TIRES AND WHEELS

     2 – 26.5-1400 x 12 fairway-type turf tires

8.   COMBINATION VERTI-CUT AND SWEEPER HEAD

     L – 78” (198 cm), W – 39” (99 cm), H – 18” (46 cm); steel and scalp roller
     Verti-Cut Reel: 72” wide (183 cm); hydraulic driven from main pump to drive motor; 72 hardened steel
     flail knives for verti-cutting




                                                    66
          Sweeper Reel: 72” wide (183 cm); hydraulic driven from main pump to drive motor; 4 rows of 6” long
          fingers, 24 fingers per row; adjustable height, using roller and cster adjustments; (4) adjustable caster
          wheels: 12-600 x 6 solid rubber


          RUBBER FINGER SWEEPER HEAD

          L – 78” (198 cm), W – 18” (46 cm), H – 18” (46 cm)
          Sweeper Reel: 72” wide (183 cm); hydraulic driven from main pump to drive motor; 4 rows of 6” long
          fingers, 22 fingers per row; adjustable height using caster adjustments; (4) adjustable caster wheels; 12-
          600 x 6 solid rubber


    9.        35’ (8 mm) HAND HELD VACUUM HOSE WITH SUCTION NOZZLE


    10.       WARRANTY
              Free of Defects in Material and Workmanship for 1 year; Free Pick-up and Delivery to Authorized
              Service Center for warranty or repair work performed for 2 years.

Name and Model Number: SMITHCO BIG VAC



List all part numbers required for complete assembly:




Please list items you do not meet specifications on and give complete details of what you are offering.




                                                          67
                                                                                   THIRTY

                                                                                   Price: $13,736.00
                                                                                          TIECO

                        SPECIFICATIONS FOR A
                      3-WHEEL DRIVE, 18 HP, GAS
                        3-WHEELED MACHINE


•     Please circle YES if you meet or exceed this specification.
•     Please circle NO if you do not meet this specification.
•     Failure to circle YES or NO could disqualify your bid.


1.       DRIVE                      YES                NO

         3-Wheel drive with step-through chassis design

2.       POWER                      YES                NO

         18 HP (13.5 kW) gasoline vanguard OHV engine

3.       DRIVE SYSTEM               YES                NO

         Hydrostatic power from piston pump via acceleration and deceleration valves to geroller wheel
         motor and hydraulic rear axle

4.       DRIVE CONTROL              YES                NO

         Hydrostatic foot pedal; instant forward or reverse; hydrostatic control system linked directly to
         engine throttle to automatically increase or decreae engine speed to desired level

5.       BRAKES            YES                NO

         Dynamic braking through the hydrostatic drive system with parking brake

6.       STEERING                   YES                NO

         10:1 Ratio mechanical steering; 13” steering wheel; 7.6 adjustable tilt

7.       ELECTRICAL                 YES                NO

         12-volt, 15 amp flywheel alternator; electronic start; key start; solid state ignition; one neutral
         start switch

8.       SEAT                       YES                NO

         High back, adjustable position; for operator comfort, safety

9.       FRAME                      YES                NO

         Structural steel tubing; all welded w/9” ground clearance

10.      SPEED                      YES                NO



                                                 68
                  Infinitely variable; 0-10 mph (0-10kph)

         11.      TIRES                      YES                NO

                  Three – 22 , 11.00 . 10 LP tubeless; on demountable rims



         12.      FLUIDS CAPACITY                               YES              NO

                  Fuel – 5 gallons; hydraulic fluid – 5 gallons/ both corrosion-proof polyethylene tanks

         13.     AIR FILTRATION                                 YES              NO

                  Triple filtration; B & S 2-stage cleaner, plus cyclopac

         14.      ATTACHMENT CONTROLS                           YES              NO

                  Hydraulic operated belly-mount attachment and hydraulic operated rear attachment

         15.      SAFETY                                        YES              NO

                  Manufactured in compliance with The European Machinery Directive and all amendments

         16.      DIMENSIONS                                    YES              NO

                  Length – 64”; width – 57”, with rake attachment; height – 47”

         17.      WEIGHT                                        YES              NO

                  860 lbs.

         18.      HYDRAULIC OPERATED BELLY-MOUNTED SCARIFIER WITH GAUGE WHEELS

         19.      WARRANTY

                  Free of Defects in Material and Workmanship for 1 year. Free pick-up and delivery to Authorized
                  Service Center for warranty or repair work performed for 1 year.



Name and Model Number: SMITHCO SUPER STAR 3-wd
         20.      MANUAL FRONT ALUMINUM PLOW                    YES              NO

         21.      REAR RAKE                                     YES              NO

         22.      DRAG MAT & CARRIER                            YES              NO




List all part numbers required for complete assembly:




Please list items you do not meet specifications on and give complete details of what you are offering.




                                                          69
                                                                                  THIRTY-ONE

                                                                                  Price: $11,460.00
                                                                                         TIECO


                  SPECIFICATIONS FOR A
                2-WHEEL DRIVE, 16 HP, GAS
         3-WHEELED ATHLETIC FIELD CONDITIONER


     •   Please circle YES if you meet or exceed this specification.
     •   Please circle NO if you do not meet this specification.
     •   Failure to circle YES or NO could disqualify your bid.

                                       YES              NO

1.   DRIVE………………..…………………………………………………………………2-wheel drive with step-through chassis design

                                       YES              NO

2.   POWER…………………………………..……………………………………………..16 HP (12 kW) gasoline Vanguard OHV engine

                                       YES               NO

3.   DRIVE SYSTEM…………..…Hydrostatic power from piston pump via acceleration and deceleration valves to
     geroller wheel motor and hydraulic rear axle

                                       YES              NO

4.   DRIVE CONTROL…..Hydrostatic foot pedal; instant forward or reverse; hydrostatic control system linked
     directly to engine throttle to automatically increase or decrease engine speed to desired level

                                       YES              NO

5.   BRAKES………………………………….Dynamic braking through the hydrostatic drive system, with parking brake


                                       YES              NO

6.   STEERING……….………10:1 RATIO Mechanical Front wheel steering; 13” steering wheel; 7.6 adjustable tilt

                                       YES              NO

7.   ELECTRICAL……………12-volt, 15 amp flywheel alternator; electronic start; key start; solid state ignition;
     one neutral start switch

                                       YES              NO

8.   SEAT……………………………………………………………High back, adjustable position; for operator comfort and safety

                                       YES              NO

9.   FRAME………………………………………………………………Structural steel tubing; all welded with 9” ground clearance

                                       YES              NO


                                                   70
10.     SPEED……………………………………………………………………………………………..Infinitely variable; 0-12 mph (0-19 kph)

                                           YES               NO

11.     TIRES………………………………………….…………………….Three – 22 x 11.00 x 10 LP tubeless; on demountable rims


                                           YES               NO

12.     FLUIDS CAPACITY…………………………….………………………………………Fuel – 5 gallons; hydraulic fluid – 5 gallons

                                           YES               NO

13.     AIR FILTRATION……………………………………….…………….Triple filtration; briggs 2-stage cleaner, plus cyclopac

                                           YES               NO

14.     ATTACHMENT CONTROLS…………..…..Hydraulic operated belly-mount attachment and hydraulic operated
        rear attachment

                                           YES               NO

15.     SAFETY…………....Manufactured in compliance with The European Machinery Directive and all amendments

                                           YES               NO

16.     DIMENSIONS…………………………………….……..Length – 64”; width – 57”, with rake attachment; height – 47”

                                           YES               NO

17.     WEIGHT…………………………………………………………………………………………………………………………………………….….860 lbs

                                           YES               NO

18.     Hydraulic operated belly-mounted vertical scarifier with gauge wheels.


                                           YES               NO

19.     Manual front aluminum plow

                                           YES               NO

20.     Rear rake

                                           YES               NO

21.     Drag mat & carrier


22.     WARRANTY
        Free of degects in material and workmanship for 1 year. Free pick-up and delivery to Authorized Service
        Center for warranty or repair work performed for 1 year.

Name and Model Number: SMITHCO SUPER STAR 2-wd

List all part numbers required for complete assembly:




      Please list items you do not meet specifications on and give complete details of what you are offering.




                                                        71
                                                                                        THIRTY-TWO

                                                                                        Price: $14,983.00
                                                                                               TIECO

                               SPECIFICATIONS FOR A
                                Four Cubic Yard Sweeper


     •   Please circle YES if you meet or exceed this specification.
     •   Please circle NO if you do not meet this specification.
     •   Failure to circle YES or NO could disqualify your bid.

1.   POWERTRAIN                                    YES               NO

     Two cylinder liquid cooled engine; full pressure lubrication; 20 amp alternator; fuel – 5 gallons (19 liters);
     multiple V-belt drive with electric clutch to vacuum fan; multi V-belt drive to hydraulic pump; hydraulic
     fluid – 3 gallons (11 liters); remote system for easy lubrication


2.   TIRES AND WHEELS                              YES               NO

     Two 24-1300 x 12 Fairway-type turf tires; caster wheels (on debris head): 9-3.5 x 4


3.   HOPPER                                        YES               NO

     4 Cubic yards (3.5 cu meters); steel framework, sides tailgate; tapered top to bottom; hydraulic dump
     from main hydraulic system


4.   DIMENSIONS                                    YES               NO

     Length – 161” (384 cm); Width – 66” (172 cm); Height – 87” (221 cm)


5.   SOUND LEVEL                                   YES               NO

     At ear level – 98dB; at 30 ft (9 m) – 66dB


6.   BATTERY                                       YES               NO

     12-volt automotive type 45 required; minimum 480 CCA


7.   VACUUM                                        YES               NO

     18½” (47 cm) diameter, 8 blade vacuum fan; high strength steel vacuum fan housing with replaceable
     high wear liner; clean hatch on fan housing


8.   HYDRAULIC SYSTEM                              YES               NO

     Parker hydraulic pump, multiple V-belt drive to electric clutch; Parker hydraulic motor on debris
     head, fitted with quick couplers for heads removal/service; 3-gallon (11 liters) hydraulic reservoir




                                                      72
9.       SAFETY                                         YES             NO

         Safety engineered, designed and built in accordance with all acceptable ANSI, CE, and ASAE standards

                                                        YES             NO

10.      Rubber finger sweeper head – 62” (158 cm); length 64” (162 cm); width 14” (35.5 cm); height 12” (30.5
         cm) Sweeper Reel; 62” (158 cm) wide; hydraulic driven from main pump to drive motor; 4 rows of 6” long
         fingers, 20 fingers per row; adjustable height using caster adjustments; (4) adjustable caster wheels; 9-
         3.50 x 4 pneumatic


                                                        YES             NO

11.      Clevis hitch for tractors and other vehicles



                                                        YES             NO
12.      Remote vacuum for hose with nozzle 12.5’



13.     WARRANTY

         Free pick-up and delivery to Authorized Service Center for warranty or repair work performed for 2 years.
         Free of defects in material and workmanship for 1 year

Name and Model Number: SMITHCO MID VAC




List all part numbers required for complete assembly:




Please list items you do not meet specifications on and give complete details of what you are offering.




                                                          73
                                                                              THIRTY-THREE

                                                                              Price: $15,963.00
                                                                                     TIECO

                             SPECIFICATIONS FOR A
                               SOIL RELIEVER 54”

      •   Please circle YES if you meet or exceed this specification.
      •   Please circle NO if you do not meet this specification.
      •   Failure to circle YES or NO could disqualify your bid.

                              YES             NO

1.    MACHINE WEIGHT (without P.T.O. or Optional Equipment)……………………………………………………………928 lbs

                              YES             NO

2.    WORKING WIDTH……………………………………………………………………………………………………………………………………..54”

                              YES             NO

3.    WORKING DEPTH (adjustable)………………………………………………………………………………………………………….1” – 10”

                              YES             NO

4.    HOLE SPACING(on the machine)………….…….Large tines (¾” and greater): 4”; Small tines ½” shank): 2
      ½”

                              YES             NO

5.    CAPACITY-GREENS………………………………………………………………………………………………………….36,000 Sq. Ft./Hr.

                              YES             NO

6.    RECOMMENDED TRACTOR SIZE ……………………………………………………………………………….……From 16 – 18 HP

                              YES             NO

7.    RECOMMENDED LIFT CAPACITY (at the lift ends)………………………………………………………………….…..1200 lbs

                              YES             NO

8.    RECOMMENDED COUNTER WEIGHT(on the front of the tractor)……………………………………………………150 lbs

                              YES             NO

9.    RECOMMENDED P.T.O. SPEED (while operating)…………………………………………………………….up to 500 R.P.M.

                              YES             NO

10.   LIFT SYSTEM……………………………………………………………………………………………………………………….Standard 3 Point

                              YES             NO

11.   NO creeper gear is required for 4 – inch patterns.

                              YES             NO



                                                 74
12.     REAR ROLLER

                                    YES               NO

13.     HYDRAULIC TRANSPORT SYSTEM

                                    YES               NO

14.     HYDRAULIC TOP LINK


                                    YES               NO

15.      PRICE OUT OPTIONS

         Core Collector____________________________
         Rear Roller ____________________________
         Hydraulic Transport System_________________
         Hydraulic Top Link_________________________

16.      WARRANTY
         Free of defects in material and workmanship for 1 year. Free pick-up and delivery to Authorized Service
         Center for warranty or repair work performed for three years.

Name and Model Number: SOIL RELIEVER SR 54

List all part numbers required for complete assembly:




Please list items you do not meet specifications on and give complete details of what you are offering.




                                                         75
                                                                                                           THIRTY-FOUR

                                                                                                           Price: $10,995.00
                                                                                                                  TIECO

                                    SPECIFICATIONS FOR A
                                  SPORTS TURF TOP DRESSER

        •    Please circle YES if you meet or exceed this specification.
        •    Please circle NO if you do not meet this specification.
        •    Failure to circle YES or NO could disqualify your bid.

                                                    YES                   NO

1.      HOPPER CAPACITY…….…………………………………………………………………………2.25 cubic yards (60.75 cubic feet)

                                                    YES                   NO

2.      HOPPER DIMENSIONS…………………………………………………Top 80” x 65-1/2; Bottom 60” x 46”; Depth 18.5”

                                                    YES                   NO

3.      SPREADING WIDTH………………………………………………………………………………………………………………………………….60”

                                                    YES                   NO

4.      TOP DRESSING SPEED…………………………………………………………………………………………Up to 8 mph when loaded

                                                    YES                   NO

5.      CONVEYOR BELT………………………………………………………….………..60” rubber composition with chevron pattern

                                                    YES                   NO

6.      BRUSH………………………………………………………………………………………………………..9” diameter polypropylene bristle

                                                    YES                   NO

7.      METERING GATE………………………………………………………………………………………..Opening adjustable up to 2-1/4”

                                                    YES                   NO

8.      CONTROLS……Electrically operated clutch for conveyor and brush drive; metering gate opening adjusted
        by hand

                                                    YES                   NO

9.      DRIVE………………………………………………………………………………………………………………………………………..Ground driven

                                                    YES                   NO

10.     WHEELS………………………………………………………………………………………………..Two – 33/15.50 x 16.5 flotation tires

                                                    YES                   NO

11.     HITCH.............................................................................................Adjustable height clevis pin
hitch

                                                    YES                   NO


                                                                  76
12.     ELECTRICAL REQUIREMENTS………….12 Volt direct current, negative ground (Electrical power provided
        by the tow vehicle

                                             YES               NO

13.      EMPTY WEIGHT…………………………………………………………………………………………………………………………………2000 lbs


                                             YES               NO

14.     MAXIMUM LOAD WEIGHT…………………………………………………………………………………………………………….6000 lbs


                                             YES               NO

15.     TOTAL MAXIMUM COMBINED WEIGHT…………………………………………………………………………………..….8000 lbs


                                             YES               NO

16.     MAXIMUM ANGLE OF OPERATIONS………………………………………………………………………………………………..…..15˚

                                             YES               NO

17.     TRACTOR REQUIREMENTS…………………………………………………………………………………………………………………25 HP


18.     WARRANTY
        Free of defects in material and workmanship for 3 years. Free pick-up and delivery to Authorized Service
        Center for warranty repair work performed for 3 years.

Name and Model Number: TURFCO X. L. SPORTS TURF
List all part numbers required for complete assembly:




Please list items you do not meet specifications on and give complete details of what you are offering.




                                                         77
                                                                                                           THIRTY-FIVE

                                                                                                           Price: $8,513.00
                                                                                                                  TIECO

                                       SPECIFICATIONS FOR A
                                            White Truck

        •    Please circle YES if you meet or exceed this specification.
        •    Please circle NO if you do not meet this specification.
        •    Failure to YES or NO could disqualify your bid.

                                                    YES                   NO

1.      STANDARD FEATURES…………White, 4 wheel; AM/FM radio; heater/defroster; full instrumentation;light;
        halogen headlights; backup/brake lights; turn signals; hazard lights; safety belts; full size cab doors with
        locks and roll down windows; sunvisor; windshield wipers; horn; 4-wheel hydraulic brakes (disc – front,
        drum – rear) with parking brake; side marking lights; spare tire and jack; front tow hitch; heavy duty
        battery; drop-down/removable sides and tailgate

                                                    YES                   NO

2.      ENGINE…………………………………………………………………………………………………… E.F.I/gas 4L, OHC, water-cooled

                                                    YES                   NO

3.      HORSEPOWER..............................................................................................................45hp,
890cc

                                                    YES                   NO

4.      TRANSMISSION………….…………………………………………..Manual, 3-speed synchromesh forward and 1 reverse

                                                    YES                   NO

5.      FUEL CAPACITY………………………………………………………………………………………………………………………………….9.8 gals

                                                    YES                   NO

6.      CAPACITY…………………………………………………………………………………………………………………………………………..1950lbs

                                                    YES                   NO

7.      SPEED…………………………………………….………Up to 25 mph; maximum speed controlled by electronic governor

                                                    YES                   NO

8.      CARGO AREA….…………………………………………………………………………………………………………94.29” x 54.25” x 12.8”


9.      WARRANTY
        1 year

Name and Model Number: VANTAGE

List all part numbers required for complete assembly:



                                                                  78
Please list items you do not meet specifications on and give complete details of what you are offering.




                                                         79
                                                                                                 THIRTY-SIX

                                                                                                 Price: $9,730.00
                                                                                                        TIECO

                                 SPECIFICATIONS FOR A
                                 WIDE SPIN TOP DRESSER

     •    Please circle YES if you meet or exceed this specification.
     •    Please circle NO if you do not meet this specification.
     •    Failure to YES or NO could disqualify your bid.

                                  YES          NO
1.   ENGINE…….……………………………………………………………………….9.0 HP (6.71 kw) HONDA engine with recoil start

                                                     YES                     NO
2.   HOPPER CAPACITY............................................................................21 cubic feet (0.6 cubic meter)

                                        YES              NO
3.   HOPPER SIZE………………………..72” X 37” (1.83m x 0.94m) at top, tapering to 50” x 18” (1.24m x 0.46m)

                                                   YES                      NO
4.   SPREADING WIDTH......................................................................................variable to 30’ (914m)

                                         YES             NO
5.   SPREAD APPLICATION….More than ¼” (6.35mm) up to 15’ (4.57m); extremely light up to 30’ (9.14m)

                                   YES        NO
6.   TOP DRESSING SPEED……………………………………………………………………………………………Up to 8mph (12.8km/h)

                                   YES            NO
7.   TRANSPORT SPEED…………………….……………………Up to 15mph (24km/h) empty; 8 mph (12.8km/h) loaded

                                       YES               NO
8.   CONVEYOR BELT………………18” (0.46m) wide, pebble surface composition with heavy-duty polyester cord

                                  YES        NO
9.   METERING GATE……………………………………………………………………………………………………….Full manual adjustment

                                           YES               NO
10. CONTROLS……Electrically operated independent belt and spinner place shut off. Manual independent belt
    and spinner plate speed control.

                                YES         NO
11. DRIVE…………………………………………………………………………………Hydraulic system powers belt and spinner plates

                                   YES        NO
12. MATERIAL HANDLING OPTION……………………………………………………Replaces removable spinner assembly

                                YES        NO
13. WHEELS………………………………………………………………………………………………………Two 26.5 x 14-12 NHS turf tires

                                YES        NO
14. HITCH…………………………………………………………………………………………………………………….…….Heavy-duty pin hitch

                                 YES        NO
15. EMPTY WEIGHT…………………………………………………………………………………………………………………930 lbs (422 kg)


                                                           80
                                  YES        NO
  16. SPINNERS………………………………………………………………………………………………………….Adjustable angle up & down


  17. WARRANTY
      Free of defect in material and workmanship for 3 years. Free pick-up and delivery for warranty work
      performed for 3 years.

Name and Model Number: TURFCO WIDE SPIN




      List all part numbers required for complete assembly:




      Please list items you do not meet specifications on and give complete details of what you are offering.




                                                      81

				
DOCUMENT INFO
Shared By:
Categories:
Tags:
Stats:
views:2
posted:1/11/2012
language:
pages:85