Stadium®
(Knocked Down Version)
Locker Assembly
Instructions
Part No.
86190
(See Page 2 for Optional Security Box & Footlocker) Page 1 of 2
Assembly of Stadium Locker
All bolts are to be inserted on outside of locker while all nuts are to be placed on the inside of the locker. Each
Stadium locker is assembled as a stand-alone unit. Individual units can be joined together for placement in a row.
1. Place back panel on a pair of saw horses.
Optional
Security
2. Bolt hooks to back panel.
Box 3. Bolt one side panel to the inside of a back panel flange.
4. Bolt bottom to side and back panel.
5. Bolt second side panel to bottom and to the inside of the other back panel flange.
6. Loosely bolt shelf and rod holders to side panels and insert rod into rod holder
holes.
7. Bolt top to the inside of the side panels and to the inside of the back panel.
8. Tighten bolts that anchor shelf and rod holders (leave bolts loose if installing Security
Box).
9. Place locker frame over outside edge of side panels, bottom and top and bolt
together.
10.Stand locker upright and install on a level surface.
11. Line up number plate with holes at front of shelf and rivet into place.
Optional All lockers must be anchored to the floor and / or wall.
Footlocker
See page 2 for assembly of optional Security Box and Footlocker.
View of locker
with back on floor
or saw horses. Top
Number
Locker Plate
Frame Shelf
Rod Holder
Rod
Side Panel Hooks
Back
Panel
Side Panel
Bottom Back Panel
Flanges
Penco Products, Inc. • 1-800-562-1000 • Fax 800-248-1555
www.pencoproducts.com
Page 1 of 2
Stadium® Locker Assembly Part No.
(Knocked Down Version) Instructions 86190
Optional Security Box & Footlocker Page 2 of 2
Box Side Assembly of Optional
Door Pull Security Box
1. Loosely bolt box side to shelf and top.
2. Open door to door frame assembly.
3. Bolt the door frame assembly to
the side panel, top and box side.
4. Bolt door pull to door (if installing
built-in lock, replace door pull
with built-in lock).
Door 5. Tighten all loose bolts.
Frame
6. Close door and check alignment.
Assembly
Rubber
Optional Security Box Bumpers
Seat
with
Hinge
Close up of Rubber
Side Seat Bumpers
Support Slot
Side
Seat
Support
Front
Optional Footlocker Lock
Footlocker Lock Strike
Strike
Panel Plate
Plate
Assembly of Optional Foot Locker
1. When installing locker frame (see page 1, step 9) leave bolts off bottom section.
2. Loosely bolt side seat supports (with support slot towards front of locker) to side panels.
3. Slide front footlocker panel down until downward bend on the top of the footlocker panel fits into side seat
support slot. Loosely bolt front footlocker panel to locker frame.
4. Loosely bolt seat with hinge to side seat supports.
5. Align seat and hinge to front footlocker panel.
6. Tighten all loose bolts.
7. Insert rubber bumpers in holes at top of footlocker front panel and where open seat meets back panel.
8. Attach lock strike plate to front footlocker panel with supplied rivets.
Penco Products, Inc. • 1-800-562-1000 • Fax 800-248-1555
www.pencoproducts.com
Page 2 of 2 instructions\stadium\StadiumKD-Assembly-8.indd 10/07