PRODUCT RANGE GUIDE Pg 1/3
03/11
Metallic
Description
Waterborne Metallic Acrylic Enamel
Special Features & Properties
• Available in Gold, Silver, Copper and a range of striking colours.
• A variety of application techniques can be used to enhance and develop colour and metallic reflectance
of this product. The striking radiance of the metallic is emphasised by the choice of application. They
look stunning when applied with texture, over textured surfaces and on surfaces that have a less than
perfect finish.
• Rheology modified to allow textured application and reduce the risk of sagging.
• High opacity means the application of coloured base coats is unnecessary.
• Block resistance – can be safely used where paint is in contact with other paint such as doors and windows.
• Excellent water resistance – ideal for bathrooms and laundries.
• Low odour – reduction in inconvenience and discomfort when re-painting.
Typical Uses
• Movie/TV set construction materials
• Furniture & cabinetry
• General living areas
• Commercial interior fit outs
• Textured wall coverings
Application Methods
• Airless spray: This method will give the finest finish. Best results are obtained using double atomising tips.
• HVLP: Low air volumes will create a textured finish. Higher air volumes will create finer finishes.
• Roller: Not generally recommended.
• Brush application: Not generally recommended.
Application Rates
12 – 15 square metres per litre per coat; paint requirements will be governed by texture requirements.
Gloss Levels
Gold ≈ 80%
Silver ≈ 80%
Product specifications change from time to time and may differ from those published.
PRODUCT RANGE GUIDE Pg 2/3
03/11
Scrub Resistance
The American Society for Testing and Materials – ASTM D2486
Gold 380 scrub cycles
Silver 500 scrub cycles
Volatile Organic Compounds Levels
The American Society for Testing and Materials – ASTM D3960
Gold 7 gms/litre
Silver 7 gms/litre
Surface Preparation
• General preparation of the surface to be coated should be completed before commencing application.
• All loose material must be removed and surface damage or imperfections made good.
• The surface must be clean, dry and free of contaminants.
• On previously painted or coated surfaces compatibility should be evaluated before proceeding.
• The surface must be clean, dry and free of contaminants.
• Previously painted enamel and polyurethane – sand with stearate free sandpaper to remove gloss
and clean with a lint free cloth.
• Unpainted surfaces must have a coat of primer, sealer or undercoat applied.
Painting Requirements
New Paper-faced Wall board
Prep Coat Apply 1 – 2 coats of Easy Sand. When dry, sand with stearate free sandpaper
and clean with a lint free cloth.
Top Coat 2 coats of Metallic at 12 – 15 square metres per litre per coat.
One protective over coat of AcryGlaze Gloss may be applied to enhance durability.
New Timber joinery and doors
Prep Coat Apply 1 coat of Quick Prep, Easy Sand. When dry, sand with stearate free
sandpaper and clean with a lint free cloth.
Top Coat 2 coats of Metallic at 12 – 15 square metres per litre per coat.
One protective over coat of AcryGlaze Gloss may be applied to enhance durability.
Previously painted acrylic surfaces
All loose material must be removed and surface damage or imperfections made good.
Fill all cracks and nail holes, sand with stearate free sandpaper and wipe clean with a lint free cloth.
Product specifications change from time to time and may differ from those published.
PRODUCT RANGE GUIDE Pg 3/3
03/11
Stopping Repairs
The surface must be clean, dry and free of contaminants.
Areas with a build up of grime must be cleaned with sugar soap (or quality equivalent).
Prep Coat Apply 1 – 2 coats of Easy Sand. When dry, sand with stearate free sandpaper
and clean with a lint free cloth.
Top Coat 2 coats of Metallic at 12 – 15 square metres per litre per coat.
One protective over coat of AcryGlaze Gloss may be applied to enhance durability.
Enamel and Polyurethane
Sand with stearate free sandpaper to remove gloss and clean with a lint free cloth.
Prep Coat Apply 1 – 2 coats of Easy Sand. When dry, sand with stearate free sandpaper
and clean with a lint free cloth.
Top Coat 2 coats of Metallic at 12 – 15 square metres per litre per coat.
One protective over coat of AcryGlaze Gloss may be applied to enhance durability.
Thinning
Thinning not generally recommended, however for some applications a reduction in viscosity may
aid application.
To maintain optimum coating performance, reduce viscosity with AcryGlaze Gloss up to 100mls
per litre or alternatively add clean water up to a maximum of 50mls per litre.
Drying Times
Depending on such factors as film thickness, ambient air temperatures, humidity levels and air circulation the
general dry times are:
Touch Dry 15 minutes
Re-Coat Time 2 hours
Curing Time 7 days
Application of this product is not recommended where the surface and/or air temperature is less than 10˚C.
Clean Up
All equipment can be cleaned in water.
Product specifications change from time to time and may differ from those published.