SATA-IO Slimline ECN Tracker
Last updated 10/11/2006
Submitted/
Under Sent to BoD
ECN # Description Subteam Development for Approval
Changes in measurement
methodology between Gen1i and
001 Gen2i have led to inconsistencies. Logo 9/29/2006
ECN Tracker
0/11/2006
Available to
Date BoD Users Available publicly
Approved for Review alongside spec download
SATA-IO ECN Tracker
Last updated 11/2/2006
Submitted/ Available to
Under Sent to BoD Date BoD Users Available publicly
ECN # Description Subteam Development for Approval Approved for Review alongside spec download
1 Host retransmission of COMWAKE Digital 10/31/2005
2 DCO clarifications Digital 12/19/2005
3 Link and Transport state machine typo corrections Digital X 2/9/2006 3/13/2006
4 Rise time changes for TDR measurements CabCon X 2/2/2006 3/2/2006
5 Cabcon measurement methodology clarifications CabCon X 2/27/2006 3/27/2006
6 PIO updates, all registers updated when PIO Setup received Digital X 3/31/2006 5/1/2006
7 SDB clearing all SActive bits on error Digital 3/31/2006 5/1/2006
8 SYNC Escape transition added to PIO transport Digital 4/16/2006 5/22/2006
9 Impedance balance equation correction Phy 3/20/2006 3/20/2006 4/20/2006
10 20 Dword latency clarification Digital 3/31/2006 5/1/2006
11 PIO ICRC clarification Digital X 4/16/2006 5/22/2006
12 Asynchronous signal recovery clarifications Digital X
13 Fit and compatibility improvement for eSATA cable connector CabCon X 6/7/2006 6/8/2006 6/9/2006 --------------------
REVISED to include clarification on the new bump dimension 0.25
13 + - 0.05 mm. CabCon X 6/28/2006 6/29/2006 7/5/2006
13 REVISED to include two new features CabCon X 9/21/2006 9/21/2006 9/22/2006 10/25/3006
14 OOB detection Phy X X 4/27/2006 8/4/2006 9/11/2006
Address an issue where when in state LT6:L_SendHold, there is
no way to transition to LT7:L_SendCRC when the Transport layer
15 determines the data transmission is complete. Digital X 6/1/2006 6/9/2006 6/9/2006 7/13/2006
errata includes a clarification to the state machines ensuring that a
Register FIS with the device signature is returned to the host in all
hardware reset scenarios, with or without COMRESET being a
part of the OOB sequence. Additionally, this errata provides
changes for consistency in terminology for hardware/hard resets
16 and COMRESET. Digital 6/26/2006 7/17/2006
17 Disparity Agnostic LBP Phy 7/26/2006 --- --- ---
18 Disparity Agnostic LBP - alternate proposal Phy 7/27/2006 9/6/2006 9/7/2006 9/11/2006 10/17/2006
19 than 8/2/2006 using BIST 8/24/2006 9/7/2006 10/17/2006
The non-compliant patterns section 7.2.4.1 requires patterns longer Phy 2 Dwords to be tested8/21/2006 Activate FIS with Far-End Transmit Mode. This mode only supports up to 2 D
20 SATA connector bump size errata CabCon 8/14/2006 9/21/2006 9/21/2006 9/22/2006
REVISED to correct the inadequate tolerance stack for the SATA
20 receptacle's "bump" and SATA plug's "slot" CabCon 10/26/2006 11/2/2006 11/3/2006
21 Phy 8/25/2006
Changes in measurement methodology between Gen1i and Gen2i have led to inconsistencies. 9/14/2006 9/21/2006 9/22/2006 10/24/2006
22 Section 6.1.10.1 Housing and contact electrical requirements CabCon 8/30/2006 9/20/2006
23 Phy 9/8/2006 9/14/2006 9/21/2006 9/22/2006 10/24/2006
Common mode return loss specification needs to be relaxed do to the uncontrolled nature of the common mode performance of the SATA connector.
24 Phy 9/8/2006 9/14/2006
Addition of a description of the state of the transmitter or the amplitude of the applied TDR step. 9/21/2006 9/22/2006 10/24/2006
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
SATA-IO Design Guide Tracker
Last Updated 9/24/2006
Available
publicly
alongside
Under Sent to BoD Date BoD Available to Users spec
Supp# Description Subteam Development for Approval Approved for Review download
ESD Design Guide - implementing eSATA esternal
storage system CabCon 2/27/2006
1 Software Settings Preservation impact on security Digital X 5/19/2006 6/26/2006
2 SRST impact on Port Multiplier initialization Digital 3/20/2006 4/20/2006
3 HOLD latency impact with longer interconnects Digital 5/8/2006 6/26/2006
4 Signature FIS return Digital 8/21/2006 8/21/2006 8/24/2006 8/24/2006 9/24/2006
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
SATA-IO Spec Tracker
Last updated 9/21/2006
Sent to Available to
Submitted/ BoD for Date BoD Users Available
Spec Description Subteam Under Development Approval Approved for Review Publicly
SATA Mini Multi Lane System Revision 0.921 RC CabCon 5/11/2006 5/11/2006 5/12/2006 NA
Serial ATA Extend Data Center
usage Model to Include
Gen1m/Gen2mLevel Rev 0.9 CabCon/Phy 5/25/2006
Serial ATA Revision 2.6 Draft 0.3 Tech Integration 5/30/2006 6/9/2006 6/9/2006 NA
SATA Slim 1.8" SATA Connector Draft 0.5 CabCon 8/10/2006 8/10/2006 8/10/2006
Serial ATA Revision 2.6 Draft 0.5 Tech Integration 8/1/2006 8/10/2006 9/10/2006
Serial ATA Revision 2.6 Draft 0.6 Tech Integration 8/23/2006 8/24/2006 8/25/2006
Serial ATA Revision 2.6 Draft 0.7 Tech Integration 9/20/2006 9/21/2006 9/21/2006
SATA-IO Proposal Tracker
Last updated 10/24/2006
Available to
Submitted/ Sent to BoD Date BoD Users Available
Proposal Description Subteam Under Development for Approval Approved for Review Publicly
BIST Enhancements Digital
Make Phy testing and BIST Activate support more consistent 5/1/2006 5/11/2006 5/12/2006 NA
Interop Unified Test_v1_RC2 Revised after Feb 2006 IWLogo 5/25/2006
attempts Marketing/Digital 6/7/2006 6/8/2006 6/9/2006 NA
Usage Model Naming Propsoal Revision 0.5 to integrate the terms eSATA, xSATA, and ClickConnect into the appropriate definition areas within the specification.
Interop Scope Rev 1.1 Logo
v0.5 level scope & milestones 6/8/2006 6/8/2006 6/9/2006 NA
Technical
ATA/8 definition Integration
T13 requests for additional items to share for the ATA/8 definition 5/30/2006 6/8/2006
Disparity Agnostic LBP Phy 7/25/2006
Signature FIS Digital 8/30/2006 8/31/2006 host following all OOB sequences which includ
new requirement for SATA Revision 2.6 which requires that devices return a Signature FIS to the8/31/2006
attempts to Digital 9/18/2006 9/21/2006 9/21/2006 NA
Usage Model Naming Propsoal Revision 0.62 integrate the terms eSATA, xSATA, and ClickConnect into the appropriate definition areas within the specification.
Interop Program Description v0.9 Logo 9/25/2006
Interop Program Policy v0.9 Logo 9/25/2006
Interop Program Unified Test Document v0.9 Logo 9/25/2006