TURNKEY OVERHEAD LIFTING _ RELATED EQUIPMENT

Document Sample
TURNKEY OVERHEAD LIFTING _ RELATED EQUIPMENT Powered By Docstoc
					                 Bridge Cranes                  Overhead
  Overhead
                 Single Girder Heavier Design    Lifting
   Cranes

Work Station
  Cranes

 Jib Cranes

  Runways                 www.engliftsystems.com

  Spreader
   Beams

    Load
    Beams

   Mentor                       TURNKEY
  Transfer
   CarTs

 Intelligent
   LiftING
                             OVERHEAD
   Devices

   Hoists                      LIFTING &
   Magnet


                                 RELATED
   Lifters

   Radio
  Controls

Vacuum Lifting
  Equipment                EQUIPMENT
   Tooling
 Integration

 Lift Assists
OVERHEAD                    Bridge Cranes
 LIFTING               Mentor Single Girder Standard Design            www.engliftsystems.com



                                                         Top Running Cranes
                                                         Capacities to 5 Ton
                                                         Spans 10 to 36 Feet

                                                         Under Running Cranes
                                                         Capacities to 5 Ton
                                                         Spans 10 to 36 Feet

                                                         Overhead Travelling Top Running
                                                         Cranes allow for an increase in high
                                                         hook over the under running style.
                                                         Runway systems for these cranes
                                                         are usually supported on indepen-
                                                         dent columns or saddles off appro-
                                                         priately sized building columns.

                                                         Overhead Travelling Under Running
                                                         Cranes help improve hook side ap-
                                                         proach by having the bridge girder
                                                         extend beyond the runway center
                                                         line.

                                                         For both styles of Standard Duty
                                                         Cranes, customers can order the
                                                         hoist of their choice. ELS can incor-
                                                         porate the bridge drive, trolley and
                                                         hoist controls into a single pendant
                                                         or radio controls. Optional speed
                             Hoists Brands
                                                         controls are available.
                             •	 Stahl
                             •	 Budgit                        Overhead lifting
                             •	 CM
                             •	 Coffing	
                                                              for crane bays and
                             •	 Shaw-Box                      warehouses. Built
                             •	 Kito                          for Class C duty
                             •	
                                                              service.
  Contact Info: Phone 519-669-5545 | Toll 1-800-263-9823 | E-Mail: els@engliftsystems.com
                                           Bridge Cranes                         OVERHEAD
       www.engliftsystems.com            Mentor Single Girder HD Design           LIFTING

Top Running Cranes
Capacities to 20 Ton
Spans 10 to 60 Feet


HD Top Running cranes have greater
capacity and span range over Stan-
dard Duty cranes.

More commonly used than Under
Running Cranes. Endtruck design
is more rigid and is built for heavier
loads.

Under Running Cranes
Capacities 20 Ton
Spans 10 to 60 Feet
HD Under Running Cranes are
selected for lifting applications for
best side approach.
Quick Disconnect            is stan-
dard on SD and HD Cranes, comes
prewired designed for speedy
change out of pendant with no
electrician required. If it has been
prewired, a radio can be substitued
in place of the wired pendant.
Hoists Brands
•	 Stahl
•	 Budgit
•	 CM
•	 Coffing	
•	 Shaw-Box
•	 Kito
•	
        Contact Info: Phone 519-669-5545 | Toll 1-800-263-9823 | E-Mail: els@engliftsystems.com
OVERHEAD                        Bridge Cranes
 LIFTING                          Mentor Custom Cranes                 www.engliftsystems.com



                                                         Run-Out Beams
                                                         Capacities & Spans To Suit


                                                         Runout Beams are custom designed
                                                         to extend the hoist hook beyond
                                                         the area of the runway. This allows
                                                         the crane to service a larger work
                                                         area than a conventional crane.




                                                         Low Profile Cranes
                                                         Capacities & Spans To Suit

                                                         Various designs to choose from,
                                                         these custom cranes are design to
                                                         improve hook height for low head-
                                                         room applications.
                                                         • Notched girders
                                                         • Notched runways available
                                                         • Double girder Cranes with Nest-
                                                            ed Trolleys




                                                            Custom cranes to
                                                               suit unique
                                                              applications;
                                                           extended reach and
                                                             low headroom.
  Contact Info: Phone 519-669-5545 | Toll 1-800-263-9823 | E-Mail: els@engliftsystems.com
                                      Bridge Cranes                             OVERHEAD
       www.engliftsystems.com         Mentor Box Girder Design                   LIFTING

Box Girder Cranes
Single or Double Girder
Capacities & Spans To Suit
This type of crane is used for long
spans and heavier capacities. Most
often they are of top running de-
sign.




 Customized design
 for long spans and
 heavier capacities.
       Contact Info: Phone 519-669-5545 | Toll 1-800-263-9823 | E-Mail: els@engliftsystems.com
OVERHEAD                     Runway Systems
 LIFTING                    Building Supported & Free Standing          www.engliftsystems.com



                                                          Design Considerations
                                                          If the building structure has been
                                                          designed for overhead lifting, run-
                                                          ways are built with support intervals
                                                          to suit and are engineered to acco-
                                                          modate the rated load of the bridge
                                                          crane.	Electrification	is	integrated	
                                                          into the runway design providing
                                                          power for the crane, hoist and trol-
                                                          ley when required.




   Runways for overhead travelling bridge cranes
provide the structure for the bridge crane’s horizontal
                      movement.
   Contact Info: Phone 519-669-5545 | Toll 1-800-263-9823 | E-Mail: els@engliftsystems.com
                                    Interlock Switches                           OVERHEAD
       www.engliftsystems.com           Engaging Bridges to Monorails             LIFTING

Design Considerations
Most commonly latch block/in-
terlock are manually operated by
workers to connect bridge crane
beams to monorail beams.

Typically latch block/interlocks al-
low transfer of hoist trolleys and/or
trolleys carrying parts. Paint booths
and part storage on monorail spurs
use interlock switches.




                                                Engaging bridge cranes to
                                                monorails for the transfer
                                                   of trolleys carrying
                                                    hoists and parts.
        Contact Info: Phone 519-669-5545 | Toll 1-800-263-9823 | E-Mail: els@engliftsystems.com
OVERHEAD                    Monorail Beams
 LIFTING                    Ceiling Mounted & Free Standing            www.engliftsystems.com



                                                         Monorail Beams
                                                         Capacities & Spans To Suit


                                                         Unlike bridge cranes, monorails
                                                         remain stationary and have hoists
                                                         that travel along the beam’s length.
                                                         Various hoists can be selected such
                                                         as electric chain hoists, air pow-
                                                         ered, or wire rope depending on
                                                         the application requirements.

                                                         Curved beams are used when the
                                                         path of the beam, (where loads
                                                         travel), need to change direction.




              Stationary overhead lifting
          for work stations and work areas -
 either straight or curved or a combination of both.

  Contact Info: Phone 519-669-5545 | Toll 1-800-263-9823 | E-Mail: els@engliftsystems.com
                                        Work Station                            OVERHEAD
       www.engliftsystems.com           Bridge Cranes                            LIFTING

              Ceiling Mounted
        Capacities: Up to 4,000 lbs
                Spans: Up to 30 ft
Ceiling-mounted systems require a
building with an adequate overhead
structure to support the crane. ELS
will design and engineer the struc-
ture to suit the application.

Design Features:
• Rigid runways provide for supe-
  rior positioning of loads
• Mixed capacity bridge crane sys-
  tems are possible
• Types of Track: steel and alumi-
  num track in various sizes to suit
  support centers.

Options:
• Tractor Drives
• Telescoping Bridges
• Tool Support Trolleys
• Maintenance Gates




   With ceiling mounted systems, supporting steel does
          not interfere with handling operation.
        Floor area remains unobstructed allowing
              for better utilization of space.
       Contact Info: Phone 519-669-5545 | Toll 1-800-263-9823 | E-Mail: els@engliftsystems.com
OVERHEAD                     Work Station
 LIFTING                     Bridge Cranes                             www.engliftsystems.com



                                                         Free Standing
                                                         Capacities: Up to 4000 lbs
                                                         Spans: up to 30 ft
                                                         Free Standing systems are easily in-
                                                         stalled and can be relocated. These
                                                         systems require a reinforced con-
                                                         crete floor of at least 5 inches.

                                                         Design Features:
                                                         • Rigid runways provide for supe-
                                                           rior positioning of loads
                                                         • Mixed capacity bridge crane sys-
                                                           tems are possible
                                                         • Types of Track: steel and alumi-
                                                           num track in various sizes to suit
                                                           support centers.

                                                         Options:
                                                         • Tractor Drives
                                                         • Telescoping Bridges
                                                         • Tool Support Trolleys
                                                         • Maintenance Gates




                                                           Rectangular work
                                                            area coverage.
                                                             They increase
                                                         productivity and help
                                                                reduce
                                                            worker injuries.
  Contact Info: Phone 519-669-5545 | Toll 1-800-263-9823 | E-Mail: els@engliftsystems.com
                                          Work Station                           OVERHEAD
       www.engliftsystems.com
                                           Jib Cranes                             LIFTING

Ergonomic Jibs
For Lighter Loads

Various Work Station Jibs to choose
from.

Types:
•	 WSJ200 - Wall mounted jib with
   200 º radial coverage
• WSJ360 - Free Standing jib with
   360 º radial coverage
•	 Pivot	Pro - Free standing or wall
   mounted jibs. Articulating arm
   with vacuum lifting system
•	 Tool	Support - Free Standing or
   wall mounted jibs. Tool support
   can also be a linear monorail




 For work areas that
require radial lifting
       coverage.
  Ergonomic work
  station cranes are
easy to install, move
    and position.
        Contact Info: Phone 519-669-5545 | Toll 1-800-263-9823 | E-Mail: els@engliftsystems.com
OVERHEAD
 LIFTING
                                  Jib Cranes                             www.engliftsystems.com



                                                         FS and AJ Jibs
                                                         For Heavier Loads


                                                         Gorbel Work Station
                                                         Jib Cranes
                                                         FS300 Design:
                                                         • Capacities up to 5 ton
                                                         • Spans up to 20 feet
                                                         • Position beaneath bridge cranes
                                                            for local work area coverage
                                                         • Indoor or outdoor applications
                                                         • Great for loading dock applica-
                                                            tions or machining and assembly
                                                            operations.
                                                         • Overlap coverage area with an-
                                                            other jib for staged operations.

                                                         Articulating	Design:
                                                         • Capacities up to 2,000 lbs
                                                         • Spans up to 16 feet
                                                         • Mounting Styles: free standing,
                                                            wall mounted*, ceiling mount-
                                                            ed*
                                                         • Applications: for reaching
                                                            around or under obstructions,
                                                            reaching through doorways
                                                         • Tool Support Trolleys
                                                         • Ergonomic design makes for
                                                            superior ease of movement and
                                                            precise positioning
                                                         * A structurally adequate wall/column, ceiling

Radial work area coverage for
                                                         support, or foundation is needed to support the
                                                         AJ200 and AJ360 articulating jib cranes.

     heavier capacities.
  Contact Info: Phone 519-669-5545 | Toll 1-800-263-9823 | E-Mail: els@engliftsystems.com
                                                                                   OVERHEAD
         www.engliftsystems.com
                                                  Jib Cranes                        LIFTING

WBFC & WBT Jibs
For Heavier Loads


Mentor Work Station
Jib Cranes
WBFC Design:
• Wall Mounted Full Compression
• Capacities up to 5 ton
• Spans up to 30 feet
• Mounting Style: Wall or column*
• Position beaneath bridge cranes
  for local work area coverage
• Rotation: 200 º radial coverage

WBT Design:
• Wall Bracket Tie-Rod
• Capacities up to 5 ton
• Spans up to 30 feet
• For application with high head
  room

Applications:
• Welding Stations
• Material Transfer areas
• Fabrication work zones

* A structurally adequate wall/column, ceiling
support, or foundation is needed to support the
WBFC and WBT articulating jib cranes.




                                                  Radial work area coverage for
                                                       heavier capacities.
          Contact Info: Phone 519-669-5545 | Toll 1-800-263-9823 | E-Mail: els@engliftsystems.com
OVERHEAD
 LIFTING
                               Gantry Cranes                            www.engliftsystems.com



                                                          Floor or Rail Mounted
                                                          Utility, Full and Semi-Gantry
                                                          Designs
                                                          Full	Gantry	Design:
                                                          • Capacities up to 20 ton
                                                          • Spans up to 60 feet
                                                          • Floor or rail mounted
                                                          • Indoor or outdoor applications
                                                          • Applications: service repair cen-
                                                             ters, material transfer station,

                                                          Semi	Gantry	Design:
                                                          • Capacities up to 20 ton
                                                          • Spans up to up to 60 feet
                                                          • Designed with one leg tracking
                                                            on rail and the other mounted
                                                            on a runway.

                                                          Utility	Gantry	Design:
                                                          • Capacities up to 5 tons
                                                          • Spans up to 30 feet
                                                          • Fixed or adjustable designs
                                                          • An economical way to lift mate-
                                                             rials anywhere in a facility




Rectangular work area coverage
for light and heavier capacities.
   Contact Info: Phone 519-669-5545 | Toll 1-800-263-9823 | E-Mail: els@engliftsystems.com
                                        Manipulators                            OVERHEAD
       www.engliftsystems.com                 Rigid Column                       LIFTING

Mounted on Work Station
Cranes or Over Head Rail
Design:
Offset loads are controlled with
the rigid column solution. Verti-
cal travel requirements combined
with changes in part orientation are
easily handled with end effector
tooling mounted to the rigid mast.
The rigid column can be suspended
from overhead rail or bridge sys-
tems providing area coverage for
processes.




       Contact Info: Phone 519-669-5545 | Toll 1-800-263-9823 | E-Mail: els@engliftsystems.com
OVERHEAD
 LIFTING
                               Process Arms                            www.engliftsystems.com



                                                         Mounted on Work Station
                                                         Cranes or Over Head Rail
                                                         Design:
                                                         • Process arms integrate with the
                                                           manufacturing process. Arms
                                                           provide extended reach and
                                                           control of the load through the
                                                           artculating arm structure and
                                                           traveling carriage.
                                                         • End of arm tooling provides con-
                                                           trol for attaching, manipulating,
                                                           positioning and release of the
                                                           load.

                                                         Options:
                                                         • Air accuation
                                                         • Vacuum attachment
                                                         • Operator handle controls



                                                              High cycling &
                                                              repetitive lifting
                                                                applications.




  Contact Info: Phone 519-669-5545 | Toll 1-800-263-9823 | E-Mail: els@engliftsystems.com
                                                                                Hoist Based
       www.engliftsystems.com
                                         Lifting Beams                            Lifting

Single and Two Point Lift
Light to Heavy Lifting

Lifting	Beams:
• Capacities to suit
• Spans to suit
• Attach to the crane hook or
    paired hoist hooks
• Can have 1 or multiple load
    points
• Designs: I-Beam, box girder,
    round tube, square tube

Spreader Beams:
• Designed to suit
• For applications with high head-
   room
Load	Beams:
• Designed to suit
• Applications: Die Transfer
• Designed to bolt directly to the
   die




       Contact Info: Phone 519-669-5545 | Toll 1-800-263-9823 | E-Mail: els@engliftsystems.com
Hoist Based
  Lifting                     Ergo Lifters                              www.engliftsystems.com



                                                          Lift Assists for Parts


                                                          Design:
                                                          End effector tooling is designed and
                                                          manufactured specifically for the
                                                          part handling applications where
                                                          attachment features, motion fea-
                                                          tures, ergonomics, controls and
                                                          system integration are considered.

                                                          Applications:
                                                          • Tanks
                                                          • Molded fiberglass
                                                          • Rubber bails
                                                          • Automotive parts



                                                               High cycling &
                                                               repetitive lifting
                                                                 applications.




   Contact Info: Phone 519-669-5545 | Toll 1-800-263-9823 | E-Mail: els@engliftsystems.com
                                                                                Hoist Based
      www.engliftsystems.com
                                          Ergo Lifters                            Lifting

Lift Assists for Rolls


Models:
• Roll center lifters & tilters
• Horizontal roll lift
• Roll turners - manual & electric
• Custom Designs

Design Options:
• Mandrel sizes
• Leveling
• Anti-telescoping attachments

Applications:
• Loading rolls into machines
• Palletizing and de-palletizing
• Roll craddles



    High cycling &
    repetitive lifting
      applications.




       Contact Info: Phone 519-669-5545 | Toll 1-800-263-9823 | E-Mail: els@engliftsystems.com
OVERHEAD
 LIFTING                Intelligent Assist                             www.engliftsystems.com



                                                   Intellient Lifting Devices
                                                   •	 G-Force
                                                   •	 Easy Arm
                                                   Design:
                                                   A new type of material handling equip-
                                                   ment that uses exclusive patented tech-
                                                   nology and an industrial processor con-
                                                                       system.
                                                   trolled servo drive systems.

                                                   Features:
                                                   • Infinite speed control
                                                   • Pinpoint precision
                                                   • Anti-recoil technology
                                                   • Capacity overload protection
                                                   • Power loss protection
                                                   • Float mode option

                                                   Applications:
                                                   • Automotive parts such as seats, brake
                                                     drums, motors, hydro formed parts
                                                   • Machining processes
                                                   • Tooling Integration




                                                           High Cycling &
                                                          Repetitive Lifting
                                                            Applications.
                                                               •	 Speed
                                                             •	 Precision
                                                             •	 Strength
  Contact Info: Phone 519-669-5545 | Toll 1-800-263-9823 | E-Mail: els@engliftsystems.com
                                                Hoists                          OVERHEAD
      www.engliftsystems.com             Electric Chain & Wire Rope              LIFTING

Brand Names
•	 Electric Chain Hoists
•	 Air Driven Chain Hoists
•	 Wire Rope




       Contact Info: Phone 519-669-5545 | Toll 1-800-263-9823 | E-Mail: els@engliftsystems.com
OVERHEAD
 LIFTING                Vacuum Systems                                 www.engliftsystems.com



                                                         Vacuum Tube Systems
                                                          Design:
                                                          VT tube lifting systems attach to
                                                          the load (via vacuum suction), sup-
                                                          port, lift and lower the load, all by a
                                                          single operator control.

                                                          Vacuum	Lifters:
                                                          • Mechanical
                                                          • Electrical
                                                          • Air Powered

                                                          Applications:
                                                          • Any object
                                                          • Any material
                                                          • Any shape
                                                          • Any action
                                                          • Any environment
                                                          • Lift, tilt or manipulate




  Contact Info: Phone 519-669-5545 | Toll 1-800-263-9823 | E-Mail: els@engliftsystems.com
                                                                                    FLOOR
                                        Transfer Carts                              BASED
       www.engliftsystems.com              On-Rail & Steerable
                                                                                   LIFTING
For Material &
Equipment
Design:
Standard & Custom designs. Vari-
ous deck configurations. Operator
walk beside hand held controls.

Features:
• Capacities up to 55 tons
• Mechanical & Electrical Options
• AC or DC powered

Applications:
• Moveable platform for produc-
  tion assembly
• Stable moveable machine base
• Material and equipment trans-
  fer between crane bays
• Die transfer
• Coil and Roll Transfer
• Tank transfer
• Pipe transfer




       Contact Info: Phone 519-669-5545 | Toll 1-800-263-9823 | E-Mail: els@engliftsystems.com
 FLOOR
 BASED
                   Shaft & Roll Handling
                                  Mobile Carts                        www.engliftsystems.com
LIFTING
                                                 Ergo Lifter
                                                  For lifting, turning and transporting rolls
                                                  and shafts.

                                                  Models:
                                                  • Manual
                                                  • Electrical

                                                  Benefits:
                                                  • Inexpensive
                                                  • Easy to use
                                                  • Increase productivity
                                                  • Reduce worker injury




 Contact Info: Phone 519-669-5545 | Toll 1-800-263-9823 | E-Mail: els@engliftsystems.com
                                                                                     FLOOR
                                            Roll Handling                            BASED
       www.engliftsystems.com                   Mobile Dollies
                                                                                    LIFTING
Ergo Lifter
For lifting, turning and transporting
rolls. Use in combination with roll carts
to make lifting and transporting rolls
easy and safe.

Models:
“V” cradle design securely supports your
roll. Easily and inexpensively transport
rolls.

Custom sizes available.

Capacities to 1,000lbs (453kg)

Benefits:
• Reduce worker injuries
• Minimize lost production time
• Reduce material damage
• Keep roll materials clean




  Ergonomic Roll &
   Shaft Handling
      Systems


        Contact Info: Phone 519-669-5545 | Toll 1-800-263-9823 | E-Mail: els@engliftsystems.com
 FLOOR
 BASED             Portable Work Stations                             www.engliftsystems.com
LIFTING
                                         Ergo Lifter
                                         Mobile workstation carts designed for frequent
                                         lifting of light or heavy loads. Rugged construc-
                                         tion with ergonomically designed handles. Electric
                                         hydraulic system provides the vertical lift.

                                         Options:
                                         • Variety of lift stroke lengths
                                         • Custom table sizes
                                         • Custom fixtures, workholders and load engage-
                                           ment devices
                                         • Stainless steel construction
                                         • Frame modifications
                                         • Load capacities to 500 lbs.

                                         Benefits:
                                         • Easy to use
                                         • Increase productivity
                                         • Reduce worker injury


                                                                   Make your
                                                                 workplace safer
                                                                   and more
                                                                    efficient.




 Contact Info: Phone 519-669-5545 | Toll 1-800-263-9823 | E-Mail: els@engliftsystems.com
        www.engliftsystems.com
                                              Engineering                          SERVICES

Your source for lifting
SOLUTIONS!
List	of	Services:
• Design
• Structural Analysis
• Equipment Certification
• Load Testing
• Redesign of Existing Equipment

Qualifications:
Our design solutions are certified by
on Staff Professional Engineers to
comply with all applicable regulato-
ry codes and established engineer-
ing standards.

ELS designs its equipment to rigor-
ous criteria, which includes but is
not limited to the following:

•   National Building Code of Canada
•   Canadian Electrical Code
•   Steel Design Code (CSA S16.1)
•   CMAA #74 -Specification for Top Run-
    ning & Under Running Single Girder
    Electric Traveling Cranes Utilizing
    Under Running Hoists
•   CMAA #70 -Specification for Top Run-
    ning Bridge & Gantry Type Multiple
    Girder Electric Overhead Traveling
    Cranes
•   Occupational Health and Safety Act
    (O. Reg. 851) for Industrial Establish-
    ments
•   Welded Steel Construction Code (CWB
    W59)



         Contact Info: Phone 519-669-5545 | Toll 1-800-263-9823 | E-Mail: els@engliftsystems.com
SERVICES
                   Fabrication,	Modifica-
                     tion & Installation                               www.engliftsystems.com



                                                          Workmanship & Quality
                                                          is our Focus!
                                                          Manufacturing and installations are
                                                          performed by trained work staff
                                                          qualified to:
                                                          • Canadian Welding Bureau CSA
                                                             Standard W47.1
                                                          • Licensed electricians
                                                          • esa inspects specified equip-
                                                             ment on completion of manu-
                                                             facturing.

                                                           ELS warrants its equipment for one
                                                          year, when shipped, and their work
                                                          (including installation, construc-
                                                          tion, repair and start-up), when
                                                          performed, will meet specifications
                                                          agreed to in writing, will be of good
                                                          quality and will be free from de-
                                                          fects in material and workmanship.




  Contact Info: Phone 519-669-5545 | Toll 1-800-263-9823 | E-Mail: els@engliftsystems.com

				
DOCUMENT INFO
Shared By:
Categories:
Tags:
Stats:
views:5
posted:12/27/2011
language:English
pages:29