zEvo by keralaguest

VIEWS: 1 PAGES: 7

									zEvo 2.2l Technical Specifications

Engine

- New 4G63 Cylinder Block (MN137516)

- New Oil Pan

- New Overhaul Gasket Set (1000A175)

- New Oil Jets

- New Oil Jet Check Valves

- New Oil Pump Sprocket

- New Alternator

- New Alternator Belt | Special length

- Blue Printed

- - Bored to 85.5mm

- - Honed to 85.52mm

- - Line Honed

- - Balanced/Weight adjusted Crank shaft

- - Balanced/Weight adjusted Crank pulley

- - Balanced/Weight adjusted Flywheel

- - Weight adjusted Conrods

- - Weight adjusted Pistons

- Removed: Balance Shafts

- Removed: Mechanical Water Pump

- Removed: Thermostat

- New Electrical Water Pump

- - CNC milled Water Pump Plate (sits on the block)

- Cosworth CNC ported Big Valve Cylinder head
- - +1mm Stainless Steel Intake Valves (1800 degrees max.)

- - +1mm Inconel Exhaust Valves (2400 degrees max.)

- - Performance Valve Springs

- - Titanium Retainers

- JUN 94mm 2.2L Billet Steel Crankshaft | 15.9kg

- - Manley I-Beam Extra Long Connecting Rods | 694g

- - JE custom pistons

- Hypertune Intake Manifold

- - Hypertune 3inch Throttle Body with Wiggins Clamp

- JUN 272 10.8mm Solid Camshafts

- Tomei Solid Lifters

- ACL Race Conrod Bearings

- ACL Race Main Bearings

- Power Enterprise MAG POWER II Oil Filter

- HKS Cam Sprockets

- HKS Steal Head Gasket 1.2mm

- HKS Fine Tune Timing Belt

- ARP Head Studs

- ARP Main Studs

- Custom Oil Catch Can | -10AN inlet

- ATI Super Damper

- Modified Aluminum Valve Cover

- - 1x -10AN Crankcase Ventilation Connector

- - Plugged PCV




Turbo/Intercooler
- Full Race Twin Scroll T4 Turbo Manifold (robotic TIG welded)

- Billet Turbochargers SB68-GTQ Twin Scroll T4 | 68mm ind. | 102mm exd. | .84 a/r T04 | anti surge
ported

- Bell Intercoolers custom 28x14x4.5 inch | 3 inch in/out with Wiggins clamps

- 40mm Aluminum Radiator

- Spal Dual 10 inch Low Profile Fans

- Custom 3 inch intercooler piping

- Synapse Engineering Dual 50mm Wastegates

- Synapse Engineering 50mm Blow Off Valve

- BMC Twin Air Conical Metal Top | 100mm




Electronics

- MoTeC M880

- - MAP

- - EMAP

- - EGT

- - IAT

- - LA

- - FP

- - FT

- - FL

- - OP

- - OT

- - AEM Boost Solenoid

- MoTeC CDI/8

- MoTeC SDL

- MoTeC SLM
- Odyssey PC925MJ Battery (11.1kg) re-located to the trunk with 35kvm cable

- CNC Mill Solid Aluminium Battery Mounting Bracket, special made for Odyssey 925

- Custom fuse/relay box under the dash board




Fuelling

- 2x Walbro 255 in tank

- 1x MagnaFuel ProTuner 625

- 1 liter catch tank

- JEG’S Billet In-Line Fuel Filter -8AN 10 Micron (Blue) | After filter

- MagnaFuel ProStar EFI Regulator MP-9950-B

- Bosch 1600cc Injectors

- Hypertune Dual Feed Fuel Rail (-8AN in, -6AN out)

- JEG’S Fuel Delivery Hose: -8AN

- JEG’S Fuel Return Hose: -6AN

- JEG’S/Earls Fuel Hose Ends




Exhaust

- 4 inch Down-pipe with v-band clamps

- Special made 3 inch Mid-pipe witch v-band clamp

- RS*R GT-II SS 80mm Cat Back

- 2x WasteGate Scream Pipes Routed back in the downpipe




Transmission

- Tilton Carbon/Carbon Clutch
- Tilton hudralic release bearing

- Steel Braided Clutch Line

- SQS Racing SEQSHIFT (SQSE)

- Gear Linkage Metal Bushings

- RS Transferee Case

- - Carbonetic Carbon front LSD

- RS Rear Differential Housing

- - Carbonetic Carbon rear LSD




Chassis

- Moton Triple Adjustable.

- HKS 2-way Camber/Caster Solid front upper mounts

- HKS Solid rear upper mounts

- Power Flex: Front Upper Engine Mount

- Power Flex: Front Lower Engine Mount

- CUSCO Carbon Strut Bar Front

- CUSCO Carbon Strut Bar Rear

- Custom Rear Solid Diff Hanger

- Whiteline: Bush kit-control arm front (W0593)

- Whiteline: Bush kit control arm front upper inner (W0590)

- Whiteline: Bush kit control arm lower shock mount (0589)

- Whiteline: Bush kit-control arm rear upper inner (W0591)

- Whiteline: Bush kit-toe arm inner (W0588)

- Whiteline: Bush kit-trailing arm front lower (W0594)

- Whiteline: Bush kit-diff mount (W0592)

- Whiteline: Roll center adjuster (KCA395)
- Whiteline: Bump steer correction kit (KCA388)

- Whiteline: Steering precision kit (KCA390)

- Whiteline: Swaybar-hevy duty (BMF48)

- Whiteline: Swaybar-h/duty Blade adjustable (BMR65Z)

- Whiteline: Link kit-heavy duty ball joint (KLC39)

- Whiteline: Swaybar link kit-spherical bearing (KLC002)




Wheels and brakes

- Volk CE28N 10.5 x 18 ET18 Rims (Black)

- ARP Extended Studs

- Skunk2 Lug Nuts

- Yokohama A948 295/35-18

- AP Racing 3-pedal box

- - AP Racing Clutch Cylinder

- - AP Racing Brake Cylinders

- - AP Racing Brake Bias Adjuster

- Endless Front Big Brake Kit | 6 Piston | 370mm

- Stock Brembo Rear Brakes | Powder Coated Satin Black



x ABS Removed




Interior

- Keys Racing Steering Wheel

- Works Bell Hub kit (normal length)

- Works Bell Rapfix II (Black)
- MoTeC SDL with Backlight (Dash)

- MoTeC SLM (Shift Light Module)

- SQS Racing Gear Indicator

- Custom housing for the dash and gear indicator in leather trim

- Leather Dash

- Sparco WRC Full Roll Cage (CrMoly)

- Custom Leather Door Cards

- Custom black carpet

- STÄTUS Racing Ring Alcantara Seats

								
To top