Docstoc

annex a (DOC)

Document Sample
annex a (DOC) Powered By Docstoc
					                                                                                          Annex A


  MALAYSIAN STANDARDS APPROVED ON 04/10/2011 BY THE MINISTRY
    OF SCIENCE, TECHNOLOGY AND INNOVATION IN ACCORDANCE
         WITH THE STANDARDS OF MALAYSIA ACT (ACT 549)


New Malaysian Standard

ISC A : Agriculture

1. MS 2431:2011
Fresh durian - Specification



ISC B : Chemicals and Materials

1. MS ISO 11339:2011
Adhesives - T-peel test for flexible-to-flexible bonded assemblies (ISO 11339:2010, IDT)

2. MS ISO 25179:2011
Adhesives - Determination of the solubility of water-soluble or alkali-soluble pressure-sensitive
adhesives (ISO 25179:2010, IDT)

3. MS ISO 26842-1:2011
Adhesives - Test methods for the evaluation and selection of adhesives for indoor wood products
- Part 1: Resistance to delamination in non-severe environments (ISO 26842-1:2009, IDT)

4. MS ISO 26842-2:2011
Adhesives - Test methods for the evaluation and selection of adhesives for indoor wood products
- Part 2: Resistance to delamination in severe environments (ISO 26842-2:2009, IDT)



ISC D : Building, Construction and Civil Engineering

1. MS EN 1097-1:2011
Tests for mechanical and physical properties of aggregates -Part 1: Determination of the
resistance to wear (micro-Deval)

2. MS EN 1097-3:2011
Tests for mechanical and physical properties of aggregates - Part 3: Methods for the
determination of loose bulk density and voids

3. MS EN 1097-9:2011
Tests for mechanical and physical properties of aggregates – Part 9: Determination of the
resistance to wear by abrasion from studded tyres - Nordic test
4. MS EN 1367-1:2011
Tests for thermal and weathering properties of aggregates- Part 1: Determination of resistance to
freezing and thawing

5. MS EN 1744-5:2011
Tests for chemical properties of aggregates- Part 5: Determination of acid soluble chloride salts

6. MS EN 1744-6:2011
Tests for chemical properties of aggregates- Part 6: Determination of the influence of recycled
aggregate extract on the initial setting time of cement

7. MS EN 40-1:2011
Lighting Columns - Part 1:Definitions and terms

8. MS EN 40-2:2011
Lighting Columns - Part 2: General requirements and dimensions

9. MS EN 40-3-1:2011
Lighting Columns - Part 3-1: Design and verification -Specification for characteristics loads

10. MS EN 40-3-2:2011
Lighting Columns - Part 3-2: Design and verification -Verification by testing

11. MS EN 933-10:2011
Tests for geometrical properties of aggregates: Part 10: Assessment of fine — Grading of filler
aggregates (air jet sieving)

12. MS EN 933-11:2011
Tests for geometrical properties of aggregates: Part 11: Classification test for the constituents of
coarse recycled aggregate

13. MS EN 933-4:2011
Tests for geometrical properties of aggregates: Part 4: Determination of particle shape - Shape
index

14. MS EN 933-8:2011
Tests for geometrical properties of aggregates: Part 8: Assessment of fine — Sand equivalent
test

15. MS EN 933-9:2011
Tests for geometrical properties of aggregates: Part 9: Assessment of fine — Methylene blue test
ISC E : Generation, Transmission and Distribution of Energy

1. MS 62055-21:2011
Electricity metering - Payment systems - Part 21: Framework for standardisation

2. MS IEC 62055-31:2011
Electricity metering – Payment systems – Part 31: Particular requirements – Static payment
meters for active energy (classes 1 and 2)

3. MS IEC 62109-1:2011
Safety of power converters for use in photovoltaic power systems – Part 1: General requirements



ISC W : Occupational Safety and Health

1. MS 2430-1:2011
Safety in woodworking machinery - Part 1: General requirements

2. MS 2430-2:2011
Safety in woodworking machinery - Part 2: Sawing operation

3. MS 2430-3:2011
Safety in woodworking machinery - Part 3: Planing operation

4. MS 2430-4:2011
Safety in woodworking machinery - Part 4: Routing operation



5. MS 2430-5:2011
Safety in woodworking machinery - Part 5: Moulding operation



Revised Malaysian Standard

ISC A : Agriculture

1. MS 586:2011
Swine Feeds - Specification (First Revision)
ISC J : Plastics and Plastics Products

1. MS 1241:2011
One-piece glass fibre reinforced polyester (GRP) water tanks - Nominal capacity of 100 000 litres
and below - Specification (First revision)

2. MS 1418:2011
Glass-fibre reinforced plastics underground storage tanks for petroleum products, alcohols and
alcohol gasoline mixtures - Specification (First revision)



ISC D : Building, Construction and Civil Engineering

1. MS 888:2011
White portland cement - Compositions, specifications and conformity criteria (Second revision)



ISC L : Road Vehicles

1. MS 150:2011
Road vehicles - Determination of bead unseating resistance of a tubeless passenger car tyre

				
DOCUMENT INFO
Shared By:
Categories:
Tags:
Stats:
views:3
posted:12/26/2011
language:
pages:4