Removing and installing front door liner

Document Sample
Removing and installing front door liner Powered By Docstoc
					AR72.10-P-1000P                        Removing and installing front door liner                                                                     17.9.99
MODEL             203
Illustrated on model 203.0
1               Door handle
2               Screws
3               Lock trim surround
4               Door liner
E17/3           Left front door entrance and
                exit lamp
E17/4           Right front door entrance and
                exit lamp
H4/23           Left front door mirror triangle
                speaker
H4/24           Right front door mirror triangle
                speaker




                                                                                                                                                    P72.10-2177-06

Illustrated on model 203.7
2               Screws
3               Lock trim surround
4               Door liner
H4/23           Left front door mirror triangle
                speaker
H4/24           Right front door mirror triangle
                speaker




                                                                                                                                                    P72.10-2277-06




                                         P72.10-2178-01                                                P54.21-2070-01                               P72.10-2179-01

Illustrated on model 203.0                                     6             Control cable                              N69/1   Right front door control module
5       Clips                                                  7             Connectors                                 N69/2   Left front door control module




e d                              Removing, installing
Copyright DaimlerChrysler AG 11/27/07 G/03/07. This WIS printout will not be recorded by the update service.                                               Page 1
1                                Position assembly wedge at top of door                    Model 203.0 / 203.2
                                 handle (1) and press off                                  i Press not more than 10 mm out of the
                                                                                           catch.

                                                                                           l Assembly wedge                                    *110589035900

2                                Position assembly wedge at bottom of door                 Model 203.0 / 203.2
                                 handle (1) and press off
                                                                                           l Assembly wedge                                    *110589035900
3                                Take out door handle (1)                                  Model 203.0 / 203.2
4                                Unclip SRS cover
5                                Unscrew screws (2)
6                                Unhook front entrance and exit lamp and                   With code (611) 2 exit lamps in front doors
                                 disconnect connector                                      i Left front door entrance and exit lamp
                                                                                           (E17/3), right front door entrance and exit
                                                                                           lamp (E17/4).

7                                Remove door mirror triangle speaker                       With code (810) sound system                        AR82.62-P-7850P
                                                                                           i Left front door mirror triangle speaker
                                                                                           (H4/23), right front door mirror triangle speaker
                                                                                           (H4/24).
8                                Remove lock trim surround (3)                             l Torx bit set                                      *000589011000

9                                Press door liner (4) off of inner door panel at           p Inspect clips for damage.
                                 bottom, front and rear in area of clips (5) with
                                 assembly wedge
                                                                                           l Assembly wedge                                    *110589035900
10                               Use assembly wedge to lift top of door liner              l Assembly wedge                                    *110589035900
                                 (4) out of inner sealing rail
11                               Unhook control cable (6) from inner door
                                 actuation
12                               Detach connectors (7)                                     i On left front door control module (N69/1),
                                                                                           right front door control module (N69/2).
13                               Lay door liner (4)down
14                               Install in the reverse order




           110 589 03 59 00                               000 589 01 10 00

             Assembly wedge                                   Torx bit set




Copyright DaimlerChrysler AG 11/27/07 G/03/07. This WIS printout will not be recorded by the update service.                                                     Page 2

				
DOCUMENT INFO
Shared By:
Categories:
Tags:
Stats:
views:8
posted:12/24/2011
language:English
pages:2