Safety S
PED-LOK
School Bus Loading Brake
SSC's PED-LokTM Loading Brake System
automatically applies the vehicle's service brakes
when the automated lights are flashing and the
loading door opens. This ensures the bus is secure
during loading/unloading and does NOT rely upon
the driver to do anything outside their normal drive
routine. In the absence of an automatic brake system,
some drivers could forget to utilize the SPB as
written in their State. Further, fatigue caused by the
setting and releasing of the SPB may result in some
driver's unconsciously electing not to follow proper
operating procedures. In either case, if an accident
occurs, the liability issue is raised.
PED-Lok is offered in two style kits. The standard kit engages as described above and disengages when the
loading door is closed or the Automateds are turned "Off". The kit is also available with a "push-button"
release. This version works just like the standard system, but to release the brakes the driver must first close
the loading door or turn "Off" the automateds and then press a dash mounted "release" button. PED-LokT
benefits go beyond the obvious safety issues. It also reduces the potential for Carpal Tunnel Syndrome by
reducing the number of times a driver pushes in and pulls out the dash parking brake valve.
PED-Lok comes standard with " radio mute ".
When wired this way, the control module removes
power from the AM/FM radio when the PED-Lok
brakes are applied. This removes a possible driver
distraction during the loading sequence. The PED-
Lok ECM also automatically turns "On" the brake
lights when the PED-Lok system is activated.
If you're looking for an interlock on an air-brake bus,
ask about our PED-Lok SPB interlock.