Starting the Pocket PC
• Press Power on button to
start the Pocket PC
• Owner’s screen is first
• Tap screen to bring up
Main Program Screen
• Tap start to bring up
Additional Program Screen
• Tap Pocket Navigator icon
to start the
Pocket Navigator
marine navigation program
Touch Screen GPS 1/20
part 2 of 9 copyright
Tool Bar
• After few seconds a map will
show up
• Tap the green circle at bottom
left to bring up the tool bar.
Touch Screen GPS 2/20
part 2 of 9 copyright
ZOOM IN
#1 click ZOOM OUT
#4 click
SCALE IN SCALE OUT
#2 click #3 click
Touch Screen GPS 3/20
part 2 of 9 copyright
ZOOM OUT
#4 click
Touch Screen GPS 4/20
part 2 of 9 copyright
Set up Route Entering
Press MENU
Select Overlay
Select Create
Select Route
Touch Screen GPS 5/20
part 2 of 9 copyright
Entering the Route
Points by touching
Touch screen at
successive spots to create
the route I went south
where I expected the
highway to be.
When you reach the end
hold (Press) the stylus
instead of Tapping (Click)
to terminated the route
entry process.
Touch Screen GPS 6/20
part 2 of 9 copyright
Route for west side approach
to Leathem Smith
Touch Screen GPS 7/20
part 2 of 9 copyright
Correcting the Route
by grab and drag
•Put stylus on waypoint
that needs to be moved.
•slide till waypoint is at
new/corrected position.
Touch Screen GPS 8/20
part 2 of 9 copyright
Add Waypoints to a Route
•Highlight the route to pop
up the route menu.
•Select the option you wish
to perform.
•If you select Insert WP” it
will then ask you to select
where.
Touch Screen GPS 9/20
part 2 of 9 copyright
Navigating the Route
• Route is from
Pick-N-Save to 1336 Utah.
•We start at Pick-N-Save
•Points to next waypoint
•To right first
•Then to left sharply
•Now to left slightly
•Then a sharp right Opps
•Now to rear starboard quarter
•This boat only goes to QD
Touch Screen GPS 10/20
part 2 of 9 copyright