Cluster Bracelet
Materials
• 7-8” Large Link Sterling Chain
• 1 Large Lobster Clasp
• 1 100pc package of 1 ½” thin Headpins
• 150 Spacer Beads
• 150 Pearls
• 150 Firepolish Beads
Tools
• Wirecutter
• Round Nose Pliers
• Chain Nose Pliers
Step One
Attach clasp to one end of chain.
Step Two
Add ½” of beads to headpins.
Step Three
Grip Headpin wire with the tip of the chain nose plier just above the beads and
beads and bend to a 90 degree angle.
Step Four
Using the round nose plier turn the wire up and around to form a loop, bringing
the wire back to a right angle.
Step Five
Slip the loop into the link of the chain.
Step Six
Using the chain nose plier, hold loop and wrap the wire several times around
until it reaches the base of the bead.
Remember to keep the wire at a right angle while wrapping. This will ensure an
an even coil.
Step Seven
Trim excess wire, and tuck the end down with the chain nose plier. This can
be tricky, use the tip of the plier on the tip of the wire and gently press into the
direction of the coil.
Step Eight
Repeat the process until desired fullness is achieved. Usually 2 dangles
from each chain link.
WWW.Beadmecca.com 423 S Main St, Canyonville, 97417 1-888-66-BEADS