Your Federal Quarterly Tax Payments are due April 15th Get Help Now >>

PHILIPS TV SERVICE WAY by sisusy

VIEWS: 6 PAGES: 2

									PHILIPS TV SERVICE WAY


This afternoon I got a call for service tv at my friend.
After I visit his house was ready on the table two
pieces for my tv service. Both tv's turned out my
friend factory work required for the service.
Having seen the look tv philips branded. After
unloading my tv and my test was not a flame.
Adventure continued, I began measuring power
regulator section. Apparently there is no problem.
The second measurement continues to put out the
power regulator. There I was supposed to nemuin
voltage 110-113v turned into 70-80V. From there I
began to suspect, checking of components especially
elco about the voltage I do. And found elco
100uf/160v leak at the bottom. After the
replacement was finished I tried to turn on the tv.
And mak pyak flame .. alhamdulillah ... tv show
pictures as well. After that I did testing and found
the function keys are less good. Finally made
replacement keys. Now the tv is back to normal
again.
Proceed to the second tv, tv story is a program error.
So the channels can not move. Then I just replace it
with a new channel button. After replacing the keys
back to normal and the channel can be moved up or
down.
Done, just waiting for payment

								
To top