Embed
Email

iWAY 500C Safety Mode Insert

Document Sample

Shared by: gegeshandong
Categories
Tags
Stats
views:
0
posted:
12/9/2011
language:
pages:
2
WARNING!

Vehicle drivers should never attempt to configure, adjust or

enter information into the GPS unit while driving!

This mapping GPS receiver has a Safety Mode to prevent vehicle

drivers from operating the GPS while the vehicle is in motion. The unit

will navigate and play music while moving, but the keyboard and

touch-screen buttons are temporarily disabled. The keyboard and

screen buttons become responsive when the vehicle stops.

However, if a passenger is available to act as navigator, Safety Mode

can be turned off. This switches the unit to Passenger Mode and allows

the passenger to operate the unit while the vehicle is moving.

Here's how to disable Safety Mode and switch to Passenger Mode:

1. Turn on the unit by pressing the POWER key.

2. Wait while the unit powers up. Close the opening warning message

by pressing the X in the upper right corner of the screen.

3. Access the Main Menu by pressing MENU, then choose MAIN MENU from

the options on-screen. The Main Menu will appear, as shown in the

following image. (In manuals with part number 988-0148-541, the Main

Menu on page 35 shows a Set Local Time button instead of the Safety

Mode button. Customers with those manuals should note that the Set

Local Time button works as described, but the button is found on the

Units of Measure menu.)









The iWAY Main Menu.

Printed in USA 101504 1 Pub. 988-0148-661

4. The Safety Mode button will show if the safety feature is on or off.

Tap the Safety Mode button and the following menu and warning

message appears:









Safety Mode disable menu.

5. Tap YES to disable Safety Mode and return to the Main Menu. Press

the X button to close the menus and return to the map display.

6. To leave Passenger mode and turn on Safety mode, choose SAFETY

MODE on the Main Menu, and the following message appears. You can

close the message by pressing X, or wait a few seconds and it will close

automatically. Press the X button to close the remaining menus and

return to the map display.









Safety Mode enable message.

WARNING:

When a GPS unit is used in a vehicle, the

vehicle operator is solely responsible for

operating the vehicle in a safe manner. Vehicle

operators must maintain full surveillance of all

pertinent driving conditions at all times. An

accident or collision resulting in damage to

property, personal injury or death could occur

if the operator of a GPS-equipped vehicle fails

to pay full attention to travel conditions and

vehicle operation while the vehicle is in

motion.

Do not attempt to configure, adjust or enter

information into your GPS unit while driving.



Printed in USA 101504 2 Pub. 988-0148-661



Related docs
Other docs by gegeshandong
Chapter 10 Slides-Cavico
Views: 1  |  Downloads: 0
100 Mile Club tracking sheet
Views: 4  |  Downloads: 0
lit11-12
Views: 1  |  Downloads: 0
Terranora Primary.xlsx
Views: 1  |  Downloads: 0
Study Guide Chp 17_ 19-20
Views: 2  |  Downloads: 0
8
Views: 8  |  Downloads: 0
1735-1250240321-jh09cp_ladies_footwear_wk24
Views: 1  |  Downloads: 0
By registering with docstoc.com you agree to our
privacy policy

You are almost ready to download!

You are almost ready to download!