Docstoc

9132 Use hand and power tools required for signmaking

Document Sample
9132 Use hand and power tools required for signmaking Powered By Docstoc
					                                                                                9132 version 6
                                                                                   Page 1 of 3

Use hand and power tools required for signmaking

Level                             2

Credits                           4

Purpose       People credited with this unit standard are able to: use hand tools for a
              specified purpose in signmaking; maintain hand tools for signmaking; use
              electric powered tools for a specified activity in signmaking; and maintain
              electric powered tools for signmaking.


Subfield                           Graphic Arts

Domain                             Signmaking

Status                             Registered

Status date                        16 December 2003

Date version published             23 January 2009

Planned review date                31 December 2010

Entry information                  Open.

Accreditation                      Evaluation of documentation by NZQA and industry.

Standard setting body (SSB)        Creative Trades Industry Training Organisation

Accreditation and Moderation Action Plan (AMAP) reference                   0066
This AMAP can be accessed at http://www.nzqa.govt.nz/framework/search/index.do.

Special notes

1   All work practices shall meet the requirements of relevant legislation, including Health
    and Safety in Employment Act 1992, Resource Management Act 1991, Electricity Act
    1992, and the requirements of industry codes of practice and documented enterprise
    procedures in respect to health, safety, and environmental matters.

2   Company practices refer to behavioural norms or procedures generally accepted, but
    not necessarily documented, within the company.




                                                                New Zealand Qualifications Authority 2011
                                                                                9132 version 6
                                                                                   Page 2 of 3

Elements and performance criteria

Element 1

Use hand tools for a specified purpose in signmaking.

Performance criteria

1.1       The hand tools are selected for a specified activity according to project brief and
          company practices.

1.2       The hand tools are used for a specified activity according to project brief and
          company practices.

Element 2

Maintain hand tools for signmaking.

Performance criteria

2.1       Cutting edges and points are maintained according to manufacturer’s
          recommendations.

2.2       Tools are maintained in working order and are free from rust and dirt.

2.3       Damaged or broken tools are repaired or replaced.

Element 3

Use electric powered tools for a specified activity in signmaking.

Performance criteria

3.1       Power tools are selected and set up for their specified use.

3.2       Power tools are used in accordance with manufacturer’s recommendations.

Element 4

Maintain electric powered tools for signmaking.

Performance criteria

4.1       Cutting edges and points are maintained in accordance with manufacturer’s
          recommendations.

4.2       Power tools are maintained in working order and are free from rust and dirt.

4.3       Damaged or broken tools are identified as in need of repair or replacement.




                                                                New Zealand Qualifications Authority 2011
                                                                               9132 version 6
                                                                                  Page 3 of 3

Please note

Providers must be accredited by NZQA, or an inter-institutional body with delegated
authority for quality assurance, before they can report credits from assessment against
unit standards or deliver courses of study leading to that assessment.

Industry Training Organisations must be accredited by NZQA before they can register
credits from assessment against unit standards.

Accredited providers and Industry Training Organisations assessing against unit standards
must engage with the moderation system that applies to those standards.

Accreditation requirements and an outline of the moderation system that applies to this
standard are outlined in the Accreditation and Moderation Action Plan (AMAP). The
AMAP also includes useful information about special requirements for organisations
wishing to develop education and training programmes, such as minimum qualifications for
tutors and assessors, and special resource requirements.

Comments on this unit standard

Please contact the Creative Trades Industry Training Organisation painting@xtra.co.nz if
you wish to suggest changes to the content of this unit standard.




                                                               New Zealand Qualifications Authority 2011

				
DOCUMENT INFO
Shared By:
Categories:
Tags:
Stats:
views:7
posted:12/7/2011
language:
pages:3