WIZARD
APPLICATION NOTES
Sliding doors
PRODUCT ID Dims: 10.25" W x 2.38" H x 1.81" D
TECHNICAL Supply voltage 12 to 24 VAC / VDC: -5% to +10%
SPECIFICATION Power consumption <3W
Mounting height (both available in one sensor)
Standard 5’9” to 8’2”
High 8’2” to 13”
Operating temperature range -30°F to +131°F
Degree of protection NEMA 3S / (IP54)
Product conformity R&TTE 1999/5/EC & EMC 89/336/EEC
BZT Germany, TÜV
Dimensions 10.25" W x 2.38" H x 1.81" D
Technology Microwave Transmitter frequency :24.125 GHz
(two technologies in one sensor) Focused Active Infrared
Microwave (Activation) Pattern 13’0” W x 6’6” D (wide antenna)
(two antennas provided) 6’6” W x 8’2” D (narrow antenna)
Infrared (Threshold Safety) Pattern 6’6” W x 13.75” D (wide lens)
(two lenses provided) 3’3” W x 13.75” D (narrow lens)
Housing Black (standard): may be painted non-metallic by consumer
ABS plastic & LURAN S
Minimum detection speed 2.2in/sec. (measured in axis)
APPLICATION
NOTES The Wizard sensor is a dual technology sensor used to provide activation and safety for sliding doors.
Microwave provides the motion detection, and active infrared provides the presence detection. The safety zone
along the threshold is comprised of two infrared curtains that remain on at all times, regardless of door position.
This sensor is fully programmable by remote control.
Other Notes:
1. Sensor may be painted non-metallic paint by consumer. Infrared lens must not be painted.
2. Sensor may be recessed (but exposed) in drop ceiling, but must be positioned so that it may meet
ANSI requirements (contact BEA for additional instructions). Sensor cannot be placed behind
anything.
3. Sensor cover has no exposed screws (snap fit).
4. All wiring is concealed within sensor.
5. Sensor must not be placed near metal halide lights.
6. Aesthetically pleasing because two technologies in one housing
Meets ANSI 156.10-2005 Standard for activation and safety:
Infrared can reach within 3” of the face of the door. No safety beams are required for this system (one
Wizard on each side of the door).
Sensor never shuts off. Reduces hold open time from 2.5 to 1.5 seconds creating energy efficiency.
Microwave can detect movement as slow as 2.2 inches per second, exceeding ANSI.
*Note to specifier: BEA Inc. does not sell to the end user, nor do we bid on projects. Our products are distributed
throughout over 2000 independent door distributors, as well as door manufacturers. Competitive bidding is ensured when
specifying BEA products.