Docstoc

Awesome

Document Sample
Awesome Powered By Docstoc
					Awesome
  origami
  from origami-fun.com
 Horse                                                                                                                                                   Awesome Origami
                                                                                                                                        Copyright R Hondow origami-fun.com
                                                                                                                                                     may not be reproduced




1. Start with a square piece of               2. Turn the paper over to the                       3. Using the creases you have made, bring the
paper, coloured side up. Fold the             white side.                                         top 3 corners of the model down to the
paper in half, crease well and                Fold the paper in half, crease well                 bottom corner. Flatten model.
open, and then fold again in the              and open, and then fold again in
other direction.                              the other direction. Your creases
                                              should look like this.
1. Start with a square piece of               2. Turn the paper over to the                       3. Using the creases you have made, bring the
paper, coloured side up. Fold the             white side.                                         top 3 corners of the model down to the
paper in half, crease well and                Fold the paper in half, crease well                 bottom corner. Flatten model.
open, and then fold again in the              and open, and then fold again in
other direction.                              the other direction. Your creases
                                              should look like this.




4. Fold upper layer’s outside         5. Cut only top layer       6. Fold the “legs”               7. Fold outside edges toward                   8. Turn model over and
corners toward centre line, then      up to the top crease.       upwards along the                the centre.                                    repeat steps 4-7 on other
fold the top downward along the                                   creases shown.                                                                  side. The model should now
crease shown. Unfold.                                                                                                                             look like this.


4. Fold upper layer’s outside         5. Cut only top layer       6. Fold the “legs”               7. Fold outside edges toward                   8. Turn model over and
corners toward centre line, then      up to the top crease.       upwards along the                the centre.                                    repeat steps 4-7 on other
fold the top downward along the                                   creases shown.                                                                  side. The model should now
crease shown. Unfold.                                                                                                                             look like this.




9. Rotate model and           10. Inside Reverse Fold          Optional Step:
make creases as               the head and the tail.           Blunt the 4 feet of the horse by
shown. Unfold.                Finished Horse!                  folding the tips upward on the
                                                               inside of the model.
                                                                                                                   To make the horse do a somersault,
                                                                                                                   sharply tap upwards under his tail.
9. Rotate model and           10. Inside Reverse Fold          Optional Step:        2
make creases as               the head and the tail.           Blunt the 4 feet of the horse by
shown. Unfold.                Finished Horse!                  folding the tips upward on the
 Star Box                                                                                                                                              Awesome Origami
                                                                                                                                      Copyright R Hondow origami-fun.com
                                                                                                                                                   may not be reproduced




1. Start with a square piece of          2. Turn the paper over to the           3. Using the creases you have made, Bring         4. Flatten model.
paper, coloured side up.                 white side.                             the top 3 corners of the model down to the        This is a Square Base
                                                                                 bottom corner.
Fold the top corner of the paper         Fold the paper in half, crease
down to the bottom corner.               well and open, and then fold
Crease and open again. Then fold         again in the other direction
1. Start with half sideways.
the paper in a square piece of           2. Turn the paper over to the           3. Using the creases you have made, Bring         4. Flatten model.
paper, coloured side up.                 white side.                             the top 3 corners of the model down to the        This is a Square Base
                                                                                 bottom corner.
Fold the top corner of the paper         Fold the paper in half, crease
down to the bottom corner.               well and open, and then fold
Crease and open again. Then fold         again in the other direction
the paper in half sideways.




5. Rotate Square Base so              6. Fold the uppermost outer flaps in to          7. Repeat Step 6           8. Fold each flap up toward the outer
the open end is at the top.           meet the centre line.                            on the back side           edge of the model and crease well.




5. Rotate Square Base so              6. Fold the uppermost outer flaps in to          7. Repeat Step 6           8. Fold each flap up toward the outer
the open end is at the top.           meet the centre line.                            on the back side           edge of the model and crease well.




9. Open out the flaps, and flatten.            10. Repeat Steps 8 &             11. Tuck the top flaps behind                 12. Repeat Step 11           13. Fold bottom
                                               9 on the back side.              themselves. Crease well.                      on the back side, so         of model upwards.
                                                                                                                              the model now                Crease very well
                                                                                                                              looks like this.             then unfold.
                                                                                  3

9. Open out the flaps, and flatten.            10. Repeat Steps 8 &             11. Tuck the top flaps behind                 12. Repeat Step 11           13. Fold bottom
                                          9 on the back side.        themselves. Crease well.   on the back side, so       of model upwards.
                                                                                                the model now              Crease very well
                                                                                                looks like this.           then unfold.
 Star Box                      continued                                                                                 Awesome Origami
                                                                                                        Copyright R Hondow origami-fun.com
                                                                                                                     may not be reproduced




14. Push in the base of the model,    15. Fold each             Finished Star Box!
along the creases you just made.      point of the star
                                      downwards.
This will form the base of the box.




                                                                       4
 Crane                                                                                                                                                  Awesome Origami
                                                                                                                                       Copyright R Hondow origami-fun.com
                                                                                                                                                    may not be reproduced




                                             2. Turn the paper over to the
1. Start with a square piece of              white side.                               3. Using the creases you have made, Bring the
paper, coloured side up.                                                               top 3 corners of the model down to the bottom
                                             Fold the paper in half, crease            corner. Flatten model
Fold the top corner of the paper             well and open, and then fold
down to the bottom corner.                   again in the other direction
Crease and open again. Then
fold the paper in half sideways.             2. Turn the paper over to the
1. Start with a square piece of              white side.                               3. Using the creases you have made, Bring the
paper, coloured side up.                                                               top 3 corners of the model down to the bottom
                                             Fold the paper in half, crease            corner. Flatten model
Fold the top corner of the paper             well and open, and then fold
down to the bottom corner.                   again in the other direction
Crease and open again. Then
fold the paper in half sideways.




4. Fold top triangular             5. Fold top of model             6. Open the uppermost flap of the model, bringing it                   7. Turn model over
flaps into the centre              downwards, crease                upwards and pressing the sides of the model inwards at                 and repeat Steps 4-6
and unfold                         well and unfold                  the same time. Flatten down, creasing well.                            on the other side.



4. Fold top triangular             5. Fold top of model             6. Open the uppermost flap of the model, bringing it                   7. Turn model over
flaps into the centre              downwards, crease                upwards and pressing the sides of the model inwards at                 and repeat Steps 4-6
and unfold                         well and unfold                  the same time. Flatten down, creasing well.                            on the other side.




  8. Fold top flaps into               9. Repeat on other side.        10. Fold both ‘legs’ of          11. Inside Reverse
  the centre.                                                          model up, crease very            Fold the “legs” along
                                                                       well, then unfold.               the creases you just
                                                                                       5                made.
8. Fold top flaps into            9. Repeat on other side.   10. Fold both ‘legs’ of    11. Inside Reverse
the centre.                                                  model up, crease very      Fold the “legs” along
Crane                    continued
                                                             well, then unfold.         the creases you just
                                                                                        made.                                    Awesome Origami
                                                                                                                Copyright R Hondow origami-fun.com
                                                                                                                             may not be reproduced




         12. Inside Reverse Fold one                                  Finished Crane!
         side to make a head, then fold
         down the wings




                                                                             6
 Bunny                                                                                                                                                    Awesome Origami
                                                                                                                                         Copyright R Hondow origami-fun.com
                                                                                                                                                      may not be reproduced




1. Start with your paper        2. Turn the paper over and                  3. Holding the points shown, bring them both                    4. Fold front triangles in
white side up. Fold in          fold in half diagonally and                 down to the centre point on the bottom line.                    to centre line.
half, then in half again,       in both directions. Crease
as shown. Crease well,          well and open out once                      Flatten model. This is called a waterbomb base.
then open out again.            again.
1. Start with your paper        2. Turn the paper over and                  3. Holding the points shown, bring them both                    4. Fold front triangles in
white side up. Fold in          fold in half diagonally and                 down to the centre point on the bottom line.                    to centre line.
half, then in half again,       in both directions. Crease
as shown. Crease well,          well and open out once                      Flatten model. This is called a waterbomb base.
then open out again.            again.


   diagram is
   enlarged




   diagram is
   enlarged


      5. Fold edges to                         6. Fold front flaps of top                       7. Fold again, diagonally, then tuck               8. Turn over and fold
      centre line.                             triangles downwards,                             into pockets.                                      bottom corners in to centre.
                                               creasing well.


      5. Fold edges to                         6. Fold front flaps of top                       7. Fold again, diagonally, then tuck               8. Turn over and fold
      centre line.                             triangles downwards,                             into pockets.                                      bottom corners in to centre.
                                               creasing well.




9. Fold front flap          10. Crease front        11. Move top                 12. Move the                 13. Crease top           14. Move top              15. Fold top
to the left.                flap into toward        flap to the                  next flap to                 flap in toward           flap to the               layers outward
                            centre line.            right.                       the right                    centre line.             left.                     along creases
                                                                                                                                                                 shown.
                                                                                       7
9. Fold front flap          10. Crease front        11. Move top                 12. Move the                 13. Crease top           14. Move top              15. Fold top
9. Fold front flap    10. Crease front   11. Move top       12. Move the   13. Crease top    14. Move top
 Bunny
                                                                                                                       15. Fold top
to the left.          flap into toward   flap to the        next flap to   flap in toward    flap to the               layers outward
                     continued
                      centre line.       right.             the right      centre line.      left.                     along creases
                                                                                                                Awesome Origami
                                                                                                                       shown.
                                                                                               Copyright R Hondow origami-fun.com
                                                                                                            may not be reproduced




16. Open out           17. Fold nose     18. To inflate                     Finished Puffy
the ears.              under to form     bunny, blow into                   Bunny!
                       crease shown.     its nose!
                       Then fold back
                       again.




                                                                 8
 Lily                                                                                                                                                        Awesome Origami
                                                                                                                                            Copyright R Hondow origami-fun.com
                                                                                                                                                         may not be reproduced




1. Start with your paper            2. Turn the paper over and                    3. Holding the points shown, bring them both
coloured side up.                   fold in half diagonally and in                down to the centre point on the bottom line.
                                    both directions. Crease well
Fold in half, then in half          and open out once again.                      Flatten model. This is called a waterbomb base.
again, as shown. Crease
1. Start with your paper
well, then open out again.          2. Turn the paper over and                    3. Holding the points shown, bring them both
coloured side up.                   fold in half diagonally and in                down to the centre point on the bottom line.
                                    both directions. Crease well
Fold in half, then in half
1. Start with your paper            and open out once again.
                                    2. Turn the paper over and                    Flatten model. This is called a waterbombboth
                                                                                  3. Holding the points shown, bring them base.
coloured shown. Crease
again, as side up.                  fold in half diagonally and in                down to the centre point on the bottom line.
well, then open out again.          both directions. Crease well
Fold in half, then in half          and open out once again.                      Flatten model. This is called a waterbomb base.
again, as shown. Crease
well, then open out again.




4. Fold the top triangle into the centre and unfold.                 5. You’ll need to repeat step 4 on all four        6. On the uppermost diamond, fold the
Using this crease, open out the triangle and flatten.                of the flaps of the waterbomb base. The            outside corners into the centre line,
                                                                     model will now look like this.                     crease well then open.

4. Fold the top triangle into the centre and unfold.                 5. You’ll need to repeat step 4 on all four        6. On the uppermost diamond, fold the
Using this crease, open out the triangle and flatten.                of the flaps of the waterbomb base. The            outside corners into the centre line,
                                                                     model will now look like this.                     crease well then open.
4. Fold the top triangle into the centre and unfold.                 5. You’ll need to repeat step 4 on all four        6. On the uppermost diamond, fold the
Using this crease, open out the triangle and flatten.                of the flaps of the waterbomb base. The            outside corners into the centre line,
                                                                     model will now look like this.                     crease well then open.



                                 diagram is
                                 enlarged




                                 diagram is
                                 enlarged
7. Fold the model in half                          8. Using the creases made in step 6 and 7,                      9. Repeat steps 6, 7        10. Now fold down each
and open.                                          lift the bottom point of the model (the                         and 8 on each if the        of these triangles, on all
                                 diagram is        uppermost layer only) up to the top point,                      four sides. The             four sides.
                                 enlarged
                                                   bringing in the sides of the model at the                       model should now
                                                   same time, as shown.                                            look like this.
7. Fold the model in half                          8. Using the creases made in step 6 and 7,                      9. Repeat steps 6, 7        10. Now fold down each
and open.                                          lift the bottom point of the model (the                         and 8 on each if the        of these triangles, on all
                                                   uppermost layer only) up to the top9point,                      four sides. The             four sides.
7. Fold the model in half                          8. Using in the sides of the model at the
                                                   bringing the creases made in step 6 and 7,                      model should now
                                                                                                                   9. Repeat steps 6, 7        10. Now fold down each
                                          uppermost layer only) up to the top point,             four sides. The           four sides.
                                          bringing in the sides of the model at the              model should now

 Lily
                                          same time, as shown.                                   look like this.
                continued                                                                                                                Awesome Origami
                                                                                                                        Copyright R Hondow origami-fun.com
                                                                                                                                     may not be reproduced




11. Rotate model upside down.   12. Fold the outer flaps          13. Repeat step 12     14. Fold down all petals.   Completed Lily!
                                toward the centre and             on all four sides of
                                flatten.                          the model. The
                                                                  model should now
                                                                  look like this.




                                                                             10
    Heart                                                                                                                                              Awesome Origami
                                                                                                                                      Copyright R Hondow origami-fun.com
                                                                                                                                                   may not be reproduced

   1. Start with your paper          2. Fold the top and                    3. Fold the two bottom                4. Now fold the 2 top                    5. Fold the outside
   white side up. Fold in            the bottom edges                       corners up to the top                 corners down to the                      edges in to the
   half and unfold.                  into the centre line                   centre point and unfold               bottom centre point                      points shown and
                                                                                                                  and unfold.                              unfold.
   Fold in half the
   opposite way and
   unfold.                                                                  3. Fold the two bottom
   1. Start with your paper          2. Fold the top and                                                        4. Now fold the 2 top                    5. Fold the outside
   white side up. Fold in            the bottom edges                       corners up to the top               corners down to the                      edges in to the
   half andwith your paper
   1. Start unfold.                  into thethe top line
                                     2. Fold centre and                     centre point and unfold             bottom fold the 2 top
                                                                                                                4. Now centre point
                                                                            3. Fold the two bottom
                                                                                                                and unfold. to the
                                                                                                                                                         points the outside
                                                                                                                                                         5. Foldshown and
   white side up. Fold in            the bottom edges                       corners up to the top               corners down                             unfold.in to the
                                                                                                                                                         edges
   half in half the
   Foldand unfold.                                                          centre point and unfold
   opposite way and                             top line
                                     into the centre view                                              top view bottom centre point            side view points shown and
                                                                                                                and unfold.                              unfold.
   unfold. half the
   Fold in
   opposite way and
   unfold.

                                               top view                                                  top view                              side view
   6. Fold all four              7. Now we are going to form the heart.                 8. Still holding the model together, bring         9. The model should now look
   corners in to the                           top view                                                  top view
                                                                                        the outside edges toward each other.                    side view
                                                                                                                                           something like this.
   creases just made.            Hold the model by the corners, as shown,
                                 and bring these corners together                                                                          Push the bottom diamond
                                                                                                                                           together underneath the model.

   6. Fold all four              7. Now we are going to form the heart.                 8. Still holding the model together, bring         9. The model should now look
   corners in to the                                                                    the outside edges toward each other.               something like this.
   creases all four
   6. Fold just made.            7. Now we are going to form the shown,
                                 Hold the model by the corners, asheart.                8. Still holding the model together, bring         9. The model should now look
   corners in to the             and bring these corners together                       the outside edges toward each other.               Push the bottom diamond
                                                                                                                                           something like this.
   creases just made.            Hold the model by the corners, as shown,                                                                  together underneath the model.
                                 and bring these corners together                                                                          Push the bottom diamond
                                                                                                                                           together underneath the model.
   side view




   side view

   side view
10. Lay flat on the table.    11. Use these creases          12. Fold the uppermost                      13. Fold the triangles
                              to inside reverse fold         flaps down. Then fold                       back up.
Fold the two top corners      these corners.                 the tips inward                                                              Finished heart!
down to the crease and                                                                                                                    Give it to someone you love!
unfold

10. Lay flat on the table.    11. Use these creases          12. Fold the uppermost
                                                                                 11                      13. Fold the triangles
                              to inside reverse fold         flaps down. Then fold                       back up.
 Blossom                                                                                                                                                  Awesome Origami
                                                                                                                                         Copyright R Hondow origami-fun.com
                                                                                                                                                      may not be reproduced

                                           2. Turn the paper over to the
1. Start with a square piece of            coloured side.                             3. Using the creases you have made, Bring the top 3 corners
paper, white side up.                                                                 of the model down to the bottom corner. Flatten model
                                           Fold the paper in half, crease
Fold in half and open. Then fold in        well and open, and then fold
half the other way.                        again in the other direction

                                           2. Turn the paper over to the
1. Start with a square piece of            coloured side.                             3. Using the creases you have made, Bring the top 3 corners
paper, white side up.                                                                 of the model down to the bottom corner. Flatten model
                                           2. Turn the paper over crease
                                           Fold the paper in half, to the
1. Start half and open.piece of in
Fold in with a square Then fold            coloured side. and then fold
                                           well and open,                             3. Using the creases you have made, Bring the top 3 corners
paper, white side up.
half the other way.                        again in the other direction               of the model down to the bottom corner. Flatten model
                                           Fold the paper in half, crease
Fold in half and open. Then fold in        well and open, and then fold
half the other way.                        again in the other direction




4. Rotate model so the open           5. Fold top triangular flaps into the centre.        6. Turn model over and repeat      7. Fold the bottom corner upwards to the
part is at the top.                                                                        this step on the other side.       point shown. Crease very well and unfold.




4. Rotate model so the open           5. Fold top triangular flaps into the centre.        6. Turn model over and repeat      7. Fold the bottom corner upwards to the
part is at the top.                                                                        this step on the other side.       point shown. Crease very well and unfold.
4. Rotate model so the open           5. Fold top triangular flaps into the centre.        6. Turn model over and repeat      7. Fold the bottom corner upwards to the
part is at the top.                                                                        this step on the other side.       point shown. Crease very well and unfold.




8. Open out the front and             9. You can then fold the               Finished Blossom!
back petals.                          stem in half backwards to
                                      make the petals stay in
As you open the front and             place.
back petals, the side petals
should open up too,
revealing the colour inside.
8. Open out the front and             9. You can then fold the               Finished Blossom!
back petals.                          stem in half backwards to                       12
                                      make the petals stay in
 Fortune Teller                                                                                                                                                         Awesome Origami
                                                                                                                                                       Copyright R Hondow origami-fun.com
                                                                                                                                                                    may not be reproduced

1. Start with white side                                                                                             3. Turn over and again            4. Fold in half along
up. Fold diagonally in                         2. Fold each corner into                                              fold each corner into the
                                               the centre point.                                                                                       creases shown, both
both directions.                                                                                                     centre point.                     ways, and open.




1. Start with white side                                                                                        3. Turn over and again                 4. Fold in half along
1. Start with white side
up. Fold diagonally in                         2. Fold each corner into
                                               2. Fold each corner into
                                                                                                                3. Turn over and into the
                                                                                                                fold each corner again                 4. Fold in half along
                                                                                                                                                       creases shown, both
up. Fold diagonally in                         the centre will
                                                        You point.
                                                                                                                fold each corner into the
                                                                                                                centre point.                          creases shown, both
both directions.                               the centre point.will
                                                       get “A” on You                                           centre point.                          ways, and open.
both directions.                                                                                 Here are some fortunes:                               ways, and open.
                        1     2                             a test be rich
                                                                                                                                                         red       blue
                    8             3
   diagram is                                                                                    1. You will get an “A” on a test.                                gre
   enlarged         9             4                                                              2. You will be rich.                                  pink     en
                        6     5                                                                  3. You will have very good luck today.
                                                          You will
                                                                                                 4. You will have many friends.
                                                         get “A” on You will
                                                          You will                               Here are some fortunes:
                                                                                                 5. Do a good deed today.
                   1 2
5. Number each segment from 1-8.
                                                              a test be rich
                                                         get “A” on You will
                                                       6. Open up each flap
                                                              a test be rich                     Here are some fortunes:                                  red      b
                                                                                                                                                 7. Turn thedmodelblue and
                                                                                                                                                                    over
                                                                                                                                                                     lue
                   1 2                                                                           6. Someone will call you today.                          re
                 8         3                           and write a fortune in                                                                    write a colour on each flap
                 8         3                           each segment.                                         get an party soon.
                                                                                                 7. You will go to a“A” on a test.
                                                                                                 1.                                              as shown.
   diagram is
   diagram is
   enlarged      9         4                                                                     1. You will get an “A” on a test.                              gre
   enlarged      9         4                                                                     8. You will beon Tuesday.
                                                                                                 2. Be careful rich.                                   pink
                                                                                                                                                       pink
                                                                                                                                                                green
                   6 5                                                                           2. You will be rich.                                               en
                   6 5                                                                           3. You will have very good luck today.
                                                                                                 3. You will have very good luck today.
                                                                                                 4. You will have many friends.
                                                                                                 4. You will have many friends.
                                                                                                 5. Do a good deed today.
5. Number each segment from 1-8.                       6. Open up each flap                      5. Do a good deed today.                        7. Turn the model over and
5. Number each segment from 1-8.                       and write a each flap
                                                       6. Open up fortune in                     6. Someone will call you today.                 write a the model over and
                                                                                                                                                 7. Turn colour on each flap
                                                       and write a fortune in                    6. Someone will call you today.                 write a colour on each flap
                                                       each segment.                             7. You will go to a party soon.                 as shown.
                                                       each segment.                             7. You will go to a party soon.                 as shown.
                                                                                                 8. Be careful on Tuesday.
                                                                                                 8. Be careful on Tuesday.



                                                                                red           blue
                                                                                                                Fortune Teller in action.
                                                                                      1   2
                                                                                      6   5   gre
                                                                               pink       en

                                                                                                          red           blue
                            Finished Fortune Teller!                                                            7   8
                                                                                red           blue
                                                                                red           blue              Fortune Teller in action.
                                                                                      1   2                     Fortune Teller in action.
                                                                                                                4   3
                            Use fingers to open.
                                                                                                                        gre
                                                                                      1   2              pink        en
                                                                                      6   5
                                                                               pink   6   5
                                                                                          gre
                                                                                          green
                                                                               pink           en
                                                                                                                        blue
                                                                                                       13 red           blue
                                                                                                          red
                            Finished Fortune Teller!                                                            7   8
                            Finished Fortune Teller!
 Lucky Star                                                                                                                                           Awesome Origami
                                                                                                                                     Copyright R Hondow origami-fun.com
                                                                                                                                                  may not be reproduced




                                                                                                           3. Fold the end of the strip down
 1. Tie a “knot” in the end of                                                                             and tuck it into the knot. You can
 your paper.                                  2. Pull gently to tighten, then flatten.                     cut a bit of it off if it is too long.




                                                                                                                                                    If you are having a lot
                                                                                                                                                    of trouble, try different
                                                                                                                                                    papers, or try
                                                                                                                                                    wrapping the strip of
                                                                                                                                                    paper around without
                                                                                                                                                    creasing it too much.
                                                                                                                                                    This helps a bit!

4. Now wrap the other end of     5. Keep wrapping until you get               6. Now to make this little         And you should have a
the strip around and around      to the end of the strip.                     pentagon into a star,             lovely little lucky star! It
this pentagon you have formed,   Tuck the last bit of the strip into          very gently and slowly            may take some practise to
creasing gently as you go.       the pouch. You should be left                use your fingernail to            get the star to puff out
                                 with a cute little pentagon.                 press on the centre of            perfectly, but stick with it...
                                                                              each of its edges. The            you’ll get it!
                                                                              star should puff out.




                                                                         14
 Dragon                                                                                                                                                       Awesome Origami
                                                                                                                                             Copyright R Hondow origami-fun.com
                                                                                                                                                          may not be reproduced




1. Start with a square piece of              2. Turn the paper over to
                                             the white side.                           3. Using the creases you have made, Bring the top 3
paper, coloured side up. Fold the                                                      corners of the model down to the bottom corner.
top corner of the paper down to                                                        Flatten model
the bottom corner. Crease and                Fold the paper in half,
open again. Then fold the paper              crease well and open, and
in half sideways.                            then fold again in the
                                             other direction

1. Start with a square piece of              2. Turn the paper over to
                                             the white side.                           3. Using the creases you have made, Bring the top 3
paper, coloured side up. Fold the                                                      corners of the model down to the bottom corner.
top corner of the paper down to                                                        Flatten model
the bottom corner. Crease and                Fold the paper in half,
open again. Then fold the paper              crease well and open, and
in half sideways.                            then fold again in the
                                             other direction



4. Fold top triangular              5. Fold top of model                   6. Open the uppermost flap of the model, bringing it upwards                7. Turn model over
flaps into the centre               downwards, crease                      and pressing the sides of the model inwards at the same time.               and repeat Steps 4-6
and unfold                          well and unfold                        Flatten down, creasing well.                                                on the other side.




4. Fold top triangular              5. Fold top of model                   6. Open the uppermost flap of the model, bringing it upwards                7. Turn model over
flaps into the centre               downwards, crease                      and pressing the sides of the model inwards at the same time.               and repeat Steps 4-6
and unfold                          well and unfold                        Flatten down, creasing well.                                                on the other side.




8. Bring one leg                       9. Fold this inside leg down diagonally along                       10. Now use this crease to           11. Repeat Steps 8-10 on the
upwards, inside the                    the crease shown, crease well and unfold.                           inside reverse fold the leg          other half of the model, so now it
model, and flatten.                                                                                        downwards into place                 looks like this.
                                                                                       15
 Dragon
8. Bring one leg
upwards, inside the
                                      9. Fold this inside leg down diagonally along
                             continued shown, crease well and unfold.
                                  the crease
                                                                                                             10. Now use this crease to
                                                                                                             inside reverse fold the leg
                                                                                                                                                   11. Repeat Steps 8-10 on the
                                                                                                                                                   other half of the model, so now it
                                                                                                                                                                 Awesome Origami
model, and flatten.                                                                                          downwards into place                  looks like this.
                                                                                                                                                Copyright R Hondow origami-fun.com
                                                                                                                                                               may not be reproduced




 12. To make the Tail: Fold tail                             13. Use this crease to inside                                  14. Tuck the outside edges of
 upwards along this crease, but                              reverse fold the tail upwards.                                 the tail into itself along the
 do not fold the triangle in front.                                                                                         crease shown. Crease very well.
 Crease well and Unfold.




                                                                                                                                           Squash this point



15. Outside reverse fold                 16. Inside reverse fold                       17. Crease the lower triangle forward to
along the crease                         the very tip of the tail,                     make the back leg. This will bring down
shown.                                   as shown.                                     some of the tail, which you will need to
                                                                                       squash flat.

                                                                                       This will also bend the wing forward, but
                                                                                       ignore that for the moment.




                                  hold here.
 18. To make the front leg, make this short                      19. Now fold back along the                    20. Fold wing down.
 crease, pull over and hold down.                                crease shown, and squash down.


                                                                                        16
  18. To make the front leg, make this short                    19. Now fold back along the                       20. Fold wing down.
  crease, pull over and hold down.                              crease shown, and squash down.

  Dragon                       continued                                                                                                                        Awesome Origami
                                                                                                                                               Copyright R Hondow origami-fun.com
                                                                                                                                                            may not be reproduced




21. Repeat Steps 17-20            22. Fold centre triangle down                            23. To make the neck,                24. Crease the sides of the neck, and
on the back side of the           and tuck behind wing, into the                           inside reverse fold along            fold outwards.
model, trying to line up          body.                                                    the crease shown. (Lift
the legs and wing the                                                                      up the wings so you can
same as the other side.                                                                    see the dragon take
                                                                                           shape.)




                                                   diagram is
                                                   enlarged




25. Outside                26. Outside reverse
Reverse fold along         fold once again along                27. Inside reverse fold                            28. Roll Fold the nose under twice.
the crease shown.          this crease.                         along this crease.




The wings can be folded a variety of
different ways to create different effects.
Experiment with different folds to see
which ones you like best.


                                                                                          17

				
DOCUMENT INFO
Shared By:
Categories:
Tags:
Stats:
views:6
posted:11/30/2011
language:English
pages:17