Your Federal Quarterly Tax Payments are due April 15th Get Help Now >>

downloading by hedongchenchen

VIEWS: 3 PAGES: 51

									Action   PCA ID        RDL Designation     RDL Designation (Key) Entity type
insert                                     DAILY DRILLING REPORT CLASS_OF_CLASS_OF_INDIVIDUAL
                       DAILY DRILLING REPORT DRILL BIT SIZE CLASS DRILL BIT SIZE CLASS
insert                 DRILL BIT FLOW AREA DRILL BIT FLOW AREA SINGLE_PROPERTY_DIMENSION
insert                 DRILLING RIG STANDPIPE                    CLASS_OF_INANIMATE_PHYSICAL_OBJEC
insert                 DRILLING FLUID CIRCULATION SYSTEM ASSEMBLYCLASS_OF_INANIMATE_PHYSICAL_OBJEC
UPDATE   RDS16454403   DRILL BIT 3 NS      DRILL BIT 3 NPS       CLASS_OF_INANIMATE_PHYSICAL_OBJEC
UPDATE   RDS16454448   DRILL BIT 3 1/2 NS  DRILL BIT 3 1/2 NPS   CLASS_OF_INANIMATE_PHYSICAL_OBJEC
UPDATE   RDS16454313   DRILL BIT 4 NS      DRILL BIT 4 NPS       CLASS_OF_INANIMATE_PHYSICAL_OBJEC
UPDATE   RDS16443462   DRILL BIT 6 1/8 NS  DRILL BIT 6 1/8 NPS   CLASS_OF_INANIMATE_PHYSICAL_OBJEC
UPDATE   RDS16443507   DRILL BIT 6 NS      DRILL BIT 6 NPS       CLASS_OF_INANIMATE_PHYSICAL_OBJEC
UPDATE   RDS16454358   DRILL BIT 5 7/8 NS  DRILL BIT 5 7/8 NPS   CLASS_OF_INANIMATE_PHYSICAL_OBJEC
UPDATE   RDS16453998   DRILL BIT 5 3/4 NS  DRILL BIT 5 3/4 NPS   CLASS_OF_INANIMATE_PHYSICAL_OBJEC
UPDATE   RDS16454043   DRILL BIT 5 5/8 NS  DRILL BIT 5 5/8 NPS   CLASS_OF_INANIMATE_PHYSICAL_OBJEC
UPDATE   RDS16454088   DRILL BIT 5 1/4 NS  DRILL BIT 5 1/4 NPS   CLASS_OF_INANIMATE_PHYSICAL_OBJEC
UPDATE   RDS16454133   DRILL BIT 4 7/8 NS  DRILL BIT 4 7/8 NPS   CLASS_OF_INANIMATE_PHYSICAL_OBJEC
UPDATE   RDS16454178   DRILL BIT 4 3/4 NS  DRILL BIT 4 3/4 NPS   CLASS_OF_INANIMATE_PHYSICAL_OBJEC
UPDATE   RDS16454223   DRILL BIT 4 1/2 NS  DRILL BIT 4 1/2 NPS   CLASS_OF_INANIMATE_PHYSICAL_OBJEC
UPDATE   RDS16454268   DRILL BIT 4 1/8 NS  DRILL BIT 4 1/8 NPS   CLASS_OF_INANIMATE_PHYSICAL_OBJEC
UPDATE   RDS16443417   DRILL BIT 6 1/4 NS  DRILL BIT 6 1/4 NPS   CLASS_OF_INANIMATE_PHYSICAL_OBJEC
UPDATE   RDS16443867   DRILL BIT 12 NS     DRILL BIT 12 NPS      CLASS_OF_INANIMATE_PHYSICAL_OBJEC
UPDATE   RDS16443957   DRILL BIT 11 NS     DRILL BIT 11 NPS      CLASS_OF_INANIMATE_PHYSICAL_OBJEC
UPDATE   RDS16444002   DRILL BIT 10 5/8 NS DRILL BIT 10 5/8 NPS CLASS_OF_INANIMATE_PHYSICAL_OBJEC
UPDATE   RDS16444047   DRILL BIT 9 7/8 NS  DRILL BIT 9 7/8 NPS   CLASS_OF_INANIMATE_PHYSICAL_OBJEC
UPDATE   RDS16444092   DRILL BIT 8 3/4 NS  DRILL BIT 8 3/4 NPS   CLASS_OF_INANIMATE_PHYSICAL_OBJEC
UPDATE   RDS16443552   DRILL BIT 8 1/2 NS  DRILL BIT 8 1/2 NPS   CLASS_OF_INANIMATE_PHYSICAL_OBJEC
UPDATE   RDS16443237   DRILL BIT 8 3/8 NS  DRILL BIT 8 3/8 NPS   CLASS_OF_INANIMATE_PHYSICAL_OBJEC
UPDATE   RDS16443282   DRILL BIT 7 7/8 NS  DRILL BIT 7 7/8 NPS   CLASS_OF_INANIMATE_PHYSICAL_OBJEC
UPDATE   RDS16443327   DRILL BIT 6 3/4 NS  DRILL BIT 6 3/4 NPS   CLASS_OF_INANIMATE_PHYSICAL_OBJEC
UPDATE   RDS16443372   DRILL BIT 6 1/2 NS  DRILL BIT 6 1/2 NPS   CLASS_OF_INANIMATE_PHYSICAL_OBJEC
UPDATE   RDS16443822   DRILL BIT 12 1/4 NS DRILL BIT 12 1/4 NPS CLASS_OF_INANIMATE_PHYSICAL_OBJEC
UPDATE   RDS16444407   DRILL BIT 23 NS     DRILL BIT 23 NPS      CLASS_OF_INANIMATE_PHYSICAL_OBJEC
UPDATE   RDS16444497   DRILL BIT 22 NS     DRILL BIT 22 NPS      CLASS_OF_INANIMATE_PHYSICAL_OBJEC
UPDATE   RDS16444542   DRILL BIT 20 NS     DRILL BIT 20 NPS      CLASS_OF_INANIMATE_PHYSICAL_OBJEC
UPDATE   RDS16444587   DRILL BIT 17 1/2 NS DRILL BIT 17 1/2 NPS CLASS_OF_INANIMATE_PHYSICAL_OBJEC
UPDATE   RDS16443912   DRILL BIT 17 NS     DRILL BIT 17 NPS      CLASS_OF_INANIMATE_PHYSICAL_OBJEC
UPDATE   RDS16443597   DRILL BIT 16 NS     DRILL BIT 16 NPS      CLASS_OF_INANIMATE_PHYSICAL_OBJEC
UPDATE   RDS16443642   DRILL BIT 15 1/2 NS DRILL BIT 15 1/2 NPS CLASS_OF_INANIMATE_PHYSICAL_OBJEC
UPDATE   RDS16443687   DRILL BIT 14 3/4 NS DRILL BIT 14 3/4 NPS CLASS_OF_INANIMATE_PHYSICAL_OBJEC
UPDATE   RDS16443732   DRILL BIT 13 3/4 NS DRILL BIT 13 3/4 NPS CLASS_OF_INANIMATE_PHYSICAL_OBJEC
UPDATE   RDS16443777   DRILL BIT 13 1/2 NS DRILL BIT 13 1/2 NPS CLASS_OF_INANIMATE_PHYSICAL_OBJEC
UPDATE   RDS16444362   DRILL BIT 24 NS     DRILL BIT 24 NPS      CLASS_OF_INANIMATE_PHYSICAL_OBJEC
UPDATE   RDS16444227   DRILL BIT 36 NS     DRILL BIT 36 NPS      CLASS_OF_INANIMATE_PHYSICAL_OBJEC
UPDATE   RDS16444272   DRILL BIT 30 NS     DRILL BIT 30 NPS      CLASS_OF_INANIMATE_PHYSICAL_OBJEC
UPDATE   RDS16444317   DRILL BIT 26 NS     DRILL BIT 26 NPS      CLASS_OF_INANIMATE_PHYSICAL_OBJEC
                Creator       Creation Date     Deleted   Registration status
ASS_OF_CLASS_OF_INDIVIDUAL
NGLE_PROPERTY_DIMENSION
ASS_OF_INANIMATE_PHYSICAL_OBJECT
ASS_OF_INANIMATE_PHYSICAL_OBJECT
                u20683        2005.02.09 15:05:10.000     Incomplete
                u20683        2005.02.09 15:05:10.000     Incomplete
                u20683        2005.02.09 15:05:09.000     Incomplete
                u20683        2005.02.09 14:40:46.000     Incomplete
                u20683        2005.02.09 14:40:47.000     Incomplete
                u20683        2005.02.09 15:05:09.000     Incomplete
                u20683        2005.02.09 15:05:06.000     Incomplete
                u20683        2005.02.09 15:05:06.000     Incomplete
                u20683        2005.02.09 15:05:07.000     Incomplete
                u20683        2005.02.09 15:05:07.000     Incomplete
                u20683        2005.02.09 15:05:08.000     Incomplete
                u20683        2005.02.09 15:05:08.000     Incomplete
                u20683        2005.02.09 15:05:09.000     Incomplete
                u20683        2005.02.09 14:40:46.000     Incomplete
                u20683        2005.02.09 14:40:51.000     Incomplete
                u20683        2005.02.09 14:40:52.000     Incomplete
                u20683        2005.02.09 14:40:53.000     Incomplete
                u20683        2005.02.09 14:40:53.000     Incomplete
                u20683        2005.02.09 14:40:54.000     Incomplete
                u20683        2005.02.09 14:40:47.000     Incomplete
                u20683        2005.02.09 14:40:42.000     Incomplete
                u20683        2005.02.09 14:40:44.000     Incomplete
                u20683        2005.02.09 14:40:45.000     Incomplete
                u20683        2005.02.09 14:40:45.000     Incomplete
                u20683        2005.02.09 14:40:50.000     Incomplete
                u20683        2005.02.09 14:40:57.000     Incomplete
                u20683        2005.02.09 14:40:58.000     Incomplete
                u20683        2005.02.09 14:40:58.000     Incomplete
                u20683        2005.02.09 14:40:59.000     Incomplete
                u20683        2005.02.09 14:40:51.000     Incomplete
                u20683        2005.02.09 14:40:48.000     Incomplete
                u20683        2005.02.09 14:40:48.000     Incomplete
                u20683        2005.02.09 14:40:49.000     Incomplete
                u20683        2005.02.09 14:40:49.000     Incomplete
                u20683        2005.02.09 14:40:50.000     Incomplete
                u20683        2005.02.09 14:40:56.000     Incomplete
                u20683        2005.02.09 14:40:55.000     Incomplete
                u20683        2005.02.09 14:40:55.000     Incomplete
                u20683        2005.02.09 14:40:56.000     Incomplete
Alternative designation   RDL Definition            Administrative note(s)
                          A daily drilling report class that is a class defined to be a drillbit with a specific size in the daily drillin

                                                   Definition high-pressure pathway for oilfield directory. (http://www.glossary.o
                          A rigid pipeline that provides thederived from Schlumbergerdrilling mud to travel approximately one
                                                   assembly of equipment providing the complete, circuitous path that the drillin
                          An artefact which is anDefinition derived from Schlumberger oilfield directory. (http://www.glossary.o
                          A drillbit with a nominal diameter of 3 inches.
                          A drillbit with a nominal diameter of 3 1/2 inches.
                          A drillbit with a nominal diameter of 4 inches.
                          A drillbit with a nominal diameter of 6 1/8 inches.
                          A drillbit with a nominal diameter of 6 inches.
                          A drillbit with a nominal diameter of 5 7/8 inches.
                          A drillbit with a nominal diameter of 5 3/4 inches.
                          A drillbit with a nominal diameter of 5 5/8 inches.
                          A drillbit with a nominal diameter of 5 1/4 inches.
                          A drillbit with a nominal diameter of 4 7/8 inches.
                          A drillbit with a nominal diameter of 4 3/4 inches.
                          A drillbit with a nominal diameter of 4 1/2 inches.
                          A drillbit with a nominal diameter of 4 1/8 inches.
                          A drillbit with a nominal diameter of 6 1/4 inches.
                          A drillbit with a nominal diameter of 12 inches.
                          A drillbit with a nominal diameter of 11 inches.
                          A drillbit with a nominal diameter of 10 5/8 inches.
                          A drillbit with a nominal diameter of 9 7/8 inches.
                          A drillbit with a nominal diameter of 8 3/4 inches.
                          A drillbit with a nominal diameter of 8 1/2 inches.
                          A drillbit with a nominal diameter of 8 3/8 inches.
                          A drillbit with a nominal diameter of 7 7/8 inches.
                          A drillbit with a nominal diameter of 6 3/4 inches.
                          A drillbit with a nominal diameter of 6 1/2 inches.
                          A drillbit with a nominal diameter of 12 1/4 inches.
                          A drillbit with a nominal diameter of 23 inches.
                          A drillbit with a nominal diameter of 22 inches.
                          A drillbit with a nominal diameter of 20 inches.
                          A drillbit with a nominal diameter of 17 1/2 inches.
                          A drillbit with a nominal diameter of 17 inches.
                          A drillbit with a nominal diameter of 16 inches.
                          A drillbit with a nominal diameter of 15 1/2 inches.
                          A drillbit with a nominal diameter of 14 3/4 inches.
                          A drillbit with a nominal diameter of 13 3/4 inches.
                          A drillbit with a nominal diameter of 13 1/2 inches.
                          A drillbit with a nominal diameter of 24 inches.
                          A drillbit with a nominal diameter of 36 inches.
                          A drillbit with a nominal diameter of 30 inches.
                          A drillbit with a nominal diameter of 26 inches.
                       Change description              Explanatory comment(s)            Unresolved issue
is a class defined to be a drillbit with a specific size in the daily drilling report.

                                                    Many large rigs are fitted with dual standpipes so that downtime
n derived from Schlumberger oilfield directory. (http://www.glossary.oilfield.slb.com/Display.cfm?Term=standpipe) is kept to a minimum if one standpipe r
                                                    Starting at the main rig pumps, major components include surface piping, the
n derived from Schlumberger oilfield directory. (http://www.glossary.oilfield.slb.com/Display.cfm?Term=circulation%20system) standpipe, the kelly hose
                                                    The diameter of the drill bit corresponds to the diameter of the hole it will create when used in drilling.
                                                    The diameter of the drill bit corresponds to the diameter of the hole it will create when used in drilling.
                                                    The diameter of the drill bit corresponds to the diameter of the hole it will create when used in drilling.
                                                    The diameter of the drill bit corresponds to the diameter of the hole it will create when used in drilling.
                                                    The diameter of the drill bit corresponds to the diameter of the hole it will create when used in drilling.
                                                    The diameter of the drill bit corresponds to the diameter of the hole it will create when used in drilling.
                                                    The diameter of the drill bit corresponds to the diameter of the hole it will create when used in drilling.
                                                    The diameter of the drill bit corresponds to the diameter of the hole it will create when used in drilling.
                                                    The diameter of the drill bit corresponds to the diameter of the hole it will create when used in drilling.
                                                    The diameter of the drill bit corresponds to the diameter of the hole it will create when used in drilling.
                                                    The diameter of the drill bit corresponds to the diameter of the hole it will create when used in drilling.
                                                    The diameter of the drill bit corresponds to the diameter of the hole it will create when used in drilling.
                                                    The diameter of the drill bit corresponds to the diameter of the hole it will create when used in drilling.
                                                    The diameter of the drill bit corresponds to the diameter of the hole it will create when used in drilling.
                                                    The diameter of the drill bit corresponds to the diameter of the hole it will create when used in drilling.
                                                    The diameter of the drill bit corresponds to the diameter of the hole it will create when used in drilling.
                                                    The diameter of the drill bit corresponds to the diameter of the hole it will create when used in drilling.
                                                    The diameter of the drill bit corresponds to the diameter of the hole it will create when used in drilling.
                                                    The diameter of the drill bit corresponds to the diameter of the hole it will create when used in drilling.
                                                    The diameter of the drill bit corresponds to the diameter of the hole it will create when used in drilling.
                                                    The diameter of the drill bit corresponds to the diameter of the hole it will create when used in drilling.
                                                    The diameter of the drill bit corresponds to the diameter of the hole it will create when used in drilling.
                                                    The diameter of the drill bit corresponds to the diameter of the hole it will create when used in drilling.
                                                    The diameter of the drill bit corresponds to the diameter of the hole it will create when used in drilling.
                                                    The diameter of the drill bit corresponds to the diameter of the hole it will create when used in drilling.
                                                    The diameter of the drill bit corresponds to the diameter of the hole it will create when used in drilling.
                                                    The diameter of the drill bit corresponds to the diameter of the hole it will create when used in drilling.
                                                    The diameter of the drill bit corresponds to the diameter of the hole it will create when used in drilling.
                                                    The diameter of the drill bit corresponds to the diameter of the hole it will create when used in drilling.
                                                    The diameter of the drill bit corresponds to the diameter of the hole it will create when used in drilling.
                                                    The diameter of the drill bit corresponds to the diameter of the hole it will create when used in drilling.
                                                    The diameter of the drill bit corresponds to the diameter of the hole it will create when used in drilling.
                                                    The diameter of the drill bit corresponds to the diameter of the hole it will create when used in drilling.
                                                    The diameter of the drill bit corresponds to the diameter of the hole it will create when used in drilling.
                                                    The diameter of the drill bit corresponds to the diameter of the hole it will create when used in drilling.
                                                    The diameter of the drill bit corresponds to the diameter of the hole it will create when used in drilling.
                                                    The diameter of the drill bit corresponds to the diameter of the hole it will create when used in drilling.
                                                    The diameter of the drill bit corresponds to the diameter of the hole it will create when used in drilling.
                                                    The diameter of the drill bit corresponds to the diameter of the hole it will create when used in drilling.
                       RDL adapted definition           Abbreviation          Note(s)         Examples


andpipes so that downtime is kept to a minimum if one standpipe requires repair.
 components include surface piping, the standpipe, the kelly hose (rotary), the kelly, the drillpipe, drill collars, bit nozzles, the various annular geometries o
 ds to the diameter of the hole it will create when used in drilling.
 ds to the diameter of the hole it will create when used in drilling.
 ds to the diameter of the hole it will create when used in drilling.
 ds to the diameter of the hole it will create when used in drilling.
 ds to the diameter of the hole it will create when used in drilling.
 ds to the diameter of the hole it will create when used in drilling.
 ds to the diameter of the hole it will create when used in drilling.
 ds to the diameter of the hole it will create when used in drilling.
 ds to the diameter of the hole it will create when used in drilling.
 ds to the diameter of the hole it will create when used in drilling.
 ds to the diameter of the hole it will create when used in drilling.
 ds to the diameter of the hole it will create when used in drilling.
 ds to the diameter of the hole it will create when used in drilling.
 ds to the diameter of the hole it will create when used in drilling.
 ds to the diameter of the hole it will create when used in drilling.
 ds to the diameter of the hole it will create when used in drilling.
 ds to the diameter of the hole it will create when used in drilling.
 ds to the diameter of the hole it will create when used in drilling.
 ds to the diameter of the hole it will create when used in drilling.
 ds to the diameter of the hole it will create when used in drilling.
 ds to the diameter of the hole it will create when used in drilling.
 ds to the diameter of the hole it will create when used in drilling.
 ds to the diameter of the hole it will create when used in drilling.
 ds to the diameter of the hole it will create when used in drilling.
 ds to the diameter of the hole it will create when used in drilling.
 ds to the diameter of the hole it will create when used in drilling.
 ds to the diameter of the hole it will create when used in drilling.
 ds to the diameter of the hole it will create when used in drilling.
 ds to the diameter of the hole it will create when used in drilling.
 ds to the diameter of the hole it will create when used in drilling.
 ds to the diameter of the hole it will create when used in drilling.
 ds to the diameter of the hole it will create when used in drilling.
 ds to the diameter of the hole it will create when used in drilling.
 ds to the diameter of the hole it will create when used in drilling.
 ds to the diameter of the hole it will create when used in drilling.
 ds to the diameter of the hole it will create when used in drilling.
 ds to the diameter of the hole it will create when used in drilling.
 ds to the diameter of the hole it will create when used in drilling.
 ds to the diameter of the hole it will create when used in drilling.
                      Submitting organisation           Submitter         Registrar         Registrar Authority



e drillpipe, drill collars, bit nozzles, the various annular geometries of the openhole and casing strings, the bell nipple, the flowline, the mud-cleaning equip
                      Stewardship         Stewardship contact           Error Code    Error Description



strings, the bell nipple, the flowline, the mud-cleaning equipment, the mud tanks, the centrifugal precharge pumps and, finally, the positive displacement m
e pumps and, finally, the positive displacement main rig pumps.
Action   PCA ID   RDL Designation (Key) Entity type
insert                                  CLASSIFICATION
insert                                  CLASSIFICATION
insert                                  CLASSIFICATION
insert                                  CLASSIFICATION
insert                                  CLASSIFICATION
insert                                  CLASSIFICATION
insert                                  CLASSIFICATION
insert                                  CLASSIFICATION
insert                                  CLASSIFICATION
insert                                  CLASSIFICATION
insert                                  CLASSIFICATION
insert                                  CLASSIFICATION
insert                                  CLASSIFICATION
insert                                  CLASSIFICATION
insert                                  CLASSIFICATION
insert                                  CLASSIFICATION
insert                                  CLASSIFICATION
insert                                  CLASSIFICATION
insert                                  CLASSIFICATION
insert                                  CLASSIFICATION
insert                                  CLASSIFICATION
insert                                  CLASSIFICATION
insert                                  CLASSIFICATION
insert                                  CLASSIFICATION
insert                                  CLASSIFICATION
insert                                  CLASSIFICATION
insert                                  CLASSIFICATION
insert                                  CLASSIFICATION
insert                                  CLASSIFICATION
insert                                  CLASSIFICATION
insert                                  CLASSIFICATION
insert                                  CLASSIFICATION
insert                                  CLASSIFICATION
insert                                  CLASSIFICATION
insert                                  CLASSIFICATION
insert                                  CLASSIFICATION
insert                                  CLASSIFICATION
insert                                  CLASSIFICATION
insert                                  CLASSIFICATION
insert                                  SPECIALIZATION
1. ROLE      1. Entity type
CLASSIFIED   CLASS_OF_INANIMATE_PHYSICAL_OBJECT
CLASSIFIED   CLASS_OF_INANIMATE_PHYSICAL_OBJECT
CLASSIFIED   CLASS_OF_INANIMATE_PHYSICAL_OBJECT
CLASSIFIED   CLASS_OF_INANIMATE_PHYSICAL_OBJECT
CLASSIFIED   CLASS_OF_INANIMATE_PHYSICAL_OBJECT
CLASSIFIED   CLASS_OF_INANIMATE_PHYSICAL_OBJECT
CLASSIFIED   CLASS_OF_INANIMATE_PHYSICAL_OBJECT
CLASSIFIED   CLASS_OF_INANIMATE_PHYSICAL_OBJECT
CLASSIFIED   CLASS_OF_INANIMATE_PHYSICAL_OBJECT
CLASSIFIED   CLASS_OF_INANIMATE_PHYSICAL_OBJECT
CLASSIFIED   CLASS_OF_INANIMATE_PHYSICAL_OBJECT
CLASSIFIED   CLASS_OF_INANIMATE_PHYSICAL_OBJECT
CLASSIFIED   CLASS_OF_INANIMATE_PHYSICAL_OBJECT
CLASSIFIED   CLASS_OF_INANIMATE_PHYSICAL_OBJECT
CLASSIFIED   CLASS_OF_INANIMATE_PHYSICAL_OBJECT
CLASSIFIED   CLASS_OF_INANIMATE_PHYSICAL_OBJECT
CLASSIFIED   CLASS_OF_INANIMATE_PHYSICAL_OBJECT
CLASSIFIED   CLASS_OF_INANIMATE_PHYSICAL_OBJECT
CLASSIFIED   CLASS_OF_INANIMATE_PHYSICAL_OBJECT
CLASSIFIED   CLASS_OF_INANIMATE_PHYSICAL_OBJECT
CLASSIFIED   CLASS_OF_INANIMATE_PHYSICAL_OBJECT
CLASSIFIED   CLASS_OF_INANIMATE_PHYSICAL_OBJECT
CLASSIFIED   CLASS_OF_INANIMATE_PHYSICAL_OBJECT
CLASSIFIED   CLASS_OF_INANIMATE_PHYSICAL_OBJECT
CLASSIFIED   CLASS_OF_INANIMATE_PHYSICAL_OBJECT
CLASSIFIED   CLASS_OF_INANIMATE_PHYSICAL_OBJECT
CLASSIFIED   CLASS_OF_INANIMATE_PHYSICAL_OBJECT
CLASSIFIED   CLASS_OF_INANIMATE_PHYSICAL_OBJECT
CLASSIFIED   CLASS_OF_INANIMATE_PHYSICAL_OBJECT
CLASSIFIED   CLASS_OF_INANIMATE_PHYSICAL_OBJECT
CLASSIFIED   CLASS_OF_INANIMATE_PHYSICAL_OBJECT
CLASSIFIED   CLASS_OF_INANIMATE_PHYSICAL_OBJECT
CLASSIFIED   CLASS_OF_INANIMATE_PHYSICAL_OBJECT
CLASSIFIED   CLASS_OF_INANIMATE_PHYSICAL_OBJECT
CLASSIFIED   CLASS_OF_INANIMATE_PHYSICAL_OBJECT
CLASSIFIED   CLASS_OF_INANIMATE_PHYSICAL_OBJECT
CLASSIFIED   CLASS_OF_INANIMATE_PHYSICAL_OBJECT
CLASSIFIED   CLASS_OF_INANIMATE_PHYSICAL_OBJECT
CLASSIFIED   CLASS_OF_INANIMATE_PHYSICAL_OBJECT
SUBCLASS     CLASS_OF_INANIMATE_PHYSICAL_OBJECT
                1. PCA ID 1. RDL Designation 1. Cardinality ID 1. Cardinality Name   2. ROLE    2. Entity type
                          DRILL BIT 3 NPS
                RDS16454403                                                          CLASSIFIER CLASS_OF_CLASS_OF_INDIVIDUAL
                          DRILL BIT 3 1/2 NPS
                RDS16454448                                                          CLASSIFIER CLASS_OF_CLASS_OF_INDIVIDUAL
                          DRILL BIT 4 NPS
                RDS16454313                                                          CLASSIFIER CLASS_OF_CLASS_OF_INDIVIDUAL
                          DRILL BIT 6 1/8 NPS
                RDS16443462                                                          CLASSIFIER CLASS_OF_CLASS_OF_INDIVIDUAL
                          DRILL BIT 6 NPS
                RDS16443507                                                          CLASSIFIER CLASS_OF_CLASS_OF_INDIVIDUAL
                          DRILL BIT 5 7/8 NPS
                RDS16454358                                                          CLASSIFIER CLASS_OF_CLASS_OF_INDIVIDUAL
                          DRILL BIT 5 3/4 NPS
                RDS16453998                                                          CLASSIFIER CLASS_OF_CLASS_OF_INDIVIDUAL
                          DRILL BIT 5 5/8 NPS
                RDS16454043                                                          CLASSIFIER CLASS_OF_CLASS_OF_INDIVIDUAL
                          DRILL BIT 5 1/4 NPS
                RDS16454088                                                          CLASSIFIER CLASS_OF_CLASS_OF_INDIVIDUAL
                          DRILL BIT 4 7/8 NPS
                RDS16454133                                                          CLASSIFIER CLASS_OF_CLASS_OF_INDIVIDUAL
                          DRILL BIT 4 3/4 NPS
                RDS16454178                                                          CLASSIFIER CLASS_OF_CLASS_OF_INDIVIDUAL
                          DRILL BIT 4 1/2 NPS
                RDS16454223                                                          CLASSIFIER CLASS_OF_CLASS_OF_INDIVIDUAL
                          DRILL BIT 4 1/8 NPS
                RDS16454268                                                          CLASSIFIER CLASS_OF_CLASS_OF_INDIVIDUAL
                          DRILL BIT 6 1/4 NPS
                RDS16443417                                                          CLASSIFIER CLASS_OF_CLASS_OF_INDIVIDUAL
                          DRILL BIT 12 NPS
                RDS16443867                                                          CLASSIFIER CLASS_OF_CLASS_OF_INDIVIDUAL
                          DRILL BIT 11 NPS
                RDS16443957                                                          CLASSIFIER CLASS_OF_CLASS_OF_INDIVIDUAL
                          DRILL BIT 10 5/8 NPS
                RDS16444002                                                          CLASSIFIER CLASS_OF_CLASS_OF_INDIVIDUAL
                          DRILL BIT 9 7/8 NPS
                RDS16444047                                                          CLASSIFIER CLASS_OF_CLASS_OF_INDIVIDUAL
                          DRILL BIT 8 3/4 NPS
                RDS16444092                                                          CLASSIFIER CLASS_OF_CLASS_OF_INDIVIDUAL
                          DRILL BIT 8 1/2 NPS
                RDS16443552                                                          CLASSIFIER CLASS_OF_CLASS_OF_INDIVIDUAL
                          DRILL BIT 8 3/8 NPS
                RDS16443237                                                          CLASSIFIER CLASS_OF_CLASS_OF_INDIVIDUAL
                          DRILL BIT 7 7/8 NPS
                RDS16443282                                                          CLASSIFIER CLASS_OF_CLASS_OF_INDIVIDUAL
                          DRILL BIT 6 3/4 NPS
                RDS16443327                                                          CLASSIFIER CLASS_OF_CLASS_OF_INDIVIDUAL
                          DRILL BIT 6 1/2 NPS
                RDS16443372                                                          CLASSIFIER CLASS_OF_CLASS_OF_INDIVIDUAL
                          DRILL BIT 12 1/4 NPS
                RDS16443822                                                          CLASSIFIER CLASS_OF_CLASS_OF_INDIVIDUAL
                          DRILL BIT 23 NPS
                RDS16444407                                                          CLASSIFIER CLASS_OF_CLASS_OF_INDIVIDUAL
                          DRILL BIT 22 NPS
                RDS16444497                                                          CLASSIFIER CLASS_OF_CLASS_OF_INDIVIDUAL
                          DRILL BIT 20 NPS
                RDS16444542                                                          CLASSIFIER CLASS_OF_CLASS_OF_INDIVIDUAL
                          DRILL BIT 17 1/2 NPS
                RDS16444587                                                          CLASSIFIER CLASS_OF_CLASS_OF_INDIVIDUAL
                          DRILL BIT 17 NPS
                RDS16443912                                                          CLASSIFIER CLASS_OF_CLASS_OF_INDIVIDUAL
                          DRILL BIT 16 NPS
                RDS16443597                                                          CLASSIFIER CLASS_OF_CLASS_OF_INDIVIDUAL
                          DRILL BIT 15 1/2 NPS
                RDS16443642                                                          CLASSIFIER CLASS_OF_CLASS_OF_INDIVIDUAL
                          DRILL BIT 14 3/4 NPS
                RDS16443687                                                          CLASSIFIER CLASS_OF_CLASS_OF_INDIVIDUAL
                          DRILL BIT 13 3/4 NPS
                RDS16443732                                                          CLASSIFIER CLASS_OF_CLASS_OF_INDIVIDUAL
                          DRILL BIT 13 1/2 NPS
                RDS16443777                                                          CLASSIFIER CLASS_OF_CLASS_OF_INDIVIDUAL
                          DRILL BIT 24 NPS
                RDS16444362                                                          CLASSIFIER CLASS_OF_CLASS_OF_INDIVIDUAL
                          DRILL BIT 36 NPS
                RDS16444227                                                          CLASSIFIER CLASS_OF_CLASS_OF_INDIVIDUAL
                          DRILL BIT 30 NPS
                RDS16444272                                                          CLASSIFIER CLASS_OF_CLASS_OF_INDIVIDUAL
                          DRILL BIT 26 NPS
                RDS16444317                                                          CLASSIFIER CLASS_OF_CLASS_OF_INDIVIDUAL
                          D
INANIMATE_PHYSICAL_OBJECT RILLING RIG STANDPIPE                                      SUPERCLASS CLASS_OF_INANIMATE_PHYSICAL_
            2. PCA ID 2. RDL Designation 2. Cardinality ID 2. Cardinality Name   Error Code
                      DAILY DRILLING REPORT DRILL BIT SIZE CLASS
CLASS_OF_CLASS_OF_INDIVIDUAL
                      DAILY DRILLING REPORT DRILL BIT SIZE CLASS
CLASS_OF_CLASS_OF_INDIVIDUAL
                      DAILY DRILLING REPORT DRILL BIT SIZE CLASS
CLASS_OF_CLASS_OF_INDIVIDUAL
                      DAILY DRILLING REPORT DRILL BIT SIZE CLASS
CLASS_OF_CLASS_OF_INDIVIDUAL
                      DAILY DRILLING REPORT DRILL BIT SIZE CLASS
CLASS_OF_CLASS_OF_INDIVIDUAL
                      DAILY DRILLING REPORT DRILL BIT SIZE CLASS
CLASS_OF_CLASS_OF_INDIVIDUAL
                      DAILY DRILLING REPORT DRILL BIT SIZE CLASS
CLASS_OF_CLASS_OF_INDIVIDUAL
                      DAILY DRILLING REPORT DRILL BIT SIZE CLASS
CLASS_OF_CLASS_OF_INDIVIDUAL
                      DAILY DRILLING REPORT DRILL BIT SIZE CLASS
CLASS_OF_CLASS_OF_INDIVIDUAL
                      DAILY DRILLING REPORT DRILL BIT SIZE CLASS
CLASS_OF_CLASS_OF_INDIVIDUAL
                      DAILY DRILLING REPORT DRILL BIT SIZE CLASS
CLASS_OF_CLASS_OF_INDIVIDUAL
                      DAILY DRILLING REPORT DRILL BIT SIZE CLASS
CLASS_OF_CLASS_OF_INDIVIDUAL
                      DAILY DRILLING REPORT DRILL BIT SIZE CLASS
CLASS_OF_CLASS_OF_INDIVIDUAL
                      DAILY DRILLING REPORT DRILL BIT SIZE CLASS
CLASS_OF_CLASS_OF_INDIVIDUAL
                      DAILY DRILLING REPORT DRILL BIT SIZE CLASS
CLASS_OF_CLASS_OF_INDIVIDUAL
                      DAILY DRILLING REPORT DRILL BIT SIZE CLASS
CLASS_OF_CLASS_OF_INDIVIDUAL
                      DAILY DRILLING REPORT DRILL BIT SIZE CLASS
CLASS_OF_CLASS_OF_INDIVIDUAL
                      DAILY DRILLING REPORT DRILL BIT SIZE CLASS
CLASS_OF_CLASS_OF_INDIVIDUAL
                      DAILY DRILLING REPORT DRILL BIT SIZE CLASS
CLASS_OF_CLASS_OF_INDIVIDUAL
                      DAILY DRILLING REPORT DRILL BIT SIZE CLASS
CLASS_OF_CLASS_OF_INDIVIDUAL
                      DAILY DRILLING REPORT DRILL BIT SIZE CLASS
CLASS_OF_CLASS_OF_INDIVIDUAL
                      DAILY DRILLING REPORT DRILL BIT SIZE CLASS
CLASS_OF_CLASS_OF_INDIVIDUAL
                      DAILY DRILLING REPORT DRILL BIT SIZE CLASS
CLASS_OF_CLASS_OF_INDIVIDUAL
                      DAILY DRILLING REPORT DRILL BIT SIZE CLASS
CLASS_OF_CLASS_OF_INDIVIDUAL
                      DAILY DRILLING REPORT DRILL BIT SIZE CLASS
CLASS_OF_CLASS_OF_INDIVIDUAL
                      DAILY DRILLING REPORT DRILL BIT SIZE CLASS
CLASS_OF_CLASS_OF_INDIVIDUAL
                      DAILY DRILLING REPORT DRILL BIT SIZE CLASS
CLASS_OF_CLASS_OF_INDIVIDUAL
                      DAILY DRILLING REPORT DRILL BIT SIZE CLASS
CLASS_OF_CLASS_OF_INDIVIDUAL
                      DAILY DRILLING REPORT DRILL BIT SIZE CLASS
CLASS_OF_CLASS_OF_INDIVIDUAL
                      DAILY DRILLING REPORT DRILL BIT SIZE CLASS
CLASS_OF_CLASS_OF_INDIVIDUAL
                      DAILY DRILLING REPORT DRILL BIT SIZE CLASS
CLASS_OF_CLASS_OF_INDIVIDUAL
                      DAILY DRILLING REPORT DRILL BIT SIZE CLASS
CLASS_OF_CLASS_OF_INDIVIDUAL
                      DAILY DRILLING REPORT DRILL BIT SIZE CLASS
CLASS_OF_CLASS_OF_INDIVIDUAL
                      DAILY DRILLING REPORT DRILL BIT SIZE CLASS
CLASS_OF_CLASS_OF_INDIVIDUAL
                      DAILY DRILLING REPORT DRILL BIT SIZE CLASS
CLASS_OF_CLASS_OF_INDIVIDUAL
                      DAILY DRILLING REPORT DRILL BIT SIZE CLASS
CLASS_OF_CLASS_OF_INDIVIDUAL
                      DAILY DRILLING REPORT DRILL BIT SIZE CLASS
CLASS_OF_CLASS_OF_INDIVIDUAL
                      DAILY DRILLING REPORT DRILL BIT SIZE CLASS
CLASS_OF_CLASS_OF_INDIVIDUAL
                      DAILY DRILLING REPORT DRILL BIT SIZE CLASS
CLASS_OF_CLASS_OF_INDIVIDUAL
                      RIGID PIPELINE
            RDS13016622
Error Description
Action   PCA ID   RDL Designation (Key) Entity type   Value
Error Code   Error Description
Action   PCA ID   RDL Designation (Key) Entity type   MC PCA ID
MC RDL Designation   Role Position   Mandatory   Cardinality ID   Cardinality Name
Error Code   Error Description
Action   PCA ID   RDL Designation (Key) Entity type   Role Position
Role PCA ID   Role RDL Designation MC PCA ID MC RDL Designation   Error Code
Error Description
Action   PCA ID   RDL Designation (Key) Entity type   Role Position
Position   MO PCA ID   MO RDL Designation   Role PCA ID Role RDL Designation
Error Code   Error Description
Action   PCA ID   RDL Designation (Key) Min   Max
Error Code   Error Description
Resp     DDR section             DDR section elements               PCA ID
                                 Start date -> Start of
Lillan   All relevant sections   reporting/operation                RDS328364025




                                 Duration" should be included for
Lillan   All relevant sections   all time intervals.


Pål      Bit data

Pål      Bit data                Size (in)                          RDS17789757




Pål      Bit data                Bit/Run number
Pål      Bit data                Make
Pål      Bit data                Model
Pål      Bit data                Serial number
Pål      Bit data                Bit TFA (in2)
Pål      Bit data                Date/Time In
Pål      Bit data                Date/Time Out
Pål      Bit data                Hours drilled (hrs)
Pål      Bit data                MD ln (mKB)
Pål      Bit data                MD Out (mKB)



Pål      Bit data                Dull grade
Pål      Bit data                Max WOB (m3)



Pål      Bit data                Max RPM (rpm)
Pål      Bit data                Max Circ rate (m3/min)
Pål      Bit data                Max SPP (bars)
Pål      Bit data                Hole Made (Run) (m)
Pål      Bit data                Hours drilled (Run) (hrs)


Pål      Bit data                ROP (m/hr)
Pål      Bit data                Max total WOB (m3)



Pål      Bit data                Max total RPM (rpm)
Pål     Bit data              Max total Circ rate (m3/min)
Pål     Bit data              Max total SPP (bars)
Pål     Bit data              Total Hole Made (Run) (m)
Pål     Bit data              Total Hours drilled (Run) (hrs)
Pål     Bit data              Total ROP (m/hr)



Magne   Casing/Liner/Tubing
Magne   Casing/Liner/Tubing   Type of pipe
Magne   Casing/Liner/Tubing   Casing Type
Magne   Casing/Liner/Tubing   Run Date/Time
Magne   Casing/Liner/Tubing   Description
Magne   Casing/Liner/Tubing   Nominal OD (in)                   RDS17659560
Magne   Casing/Liner/Tubing   Nominal ID (in)
Magne   Casing/Liner/Tubing   Nominal Weight (lbs/ft)
Magne   Casing/Liner/Tubing   Nominal Grade
Magne   Casing/Liner/Tubing   Nominal Connection
Magne   Casing/Liner/Tubing   Length (m)
Magne   Casing/Liner/Tubing   Top/Hanger MD (mKB)
Magne   Casing/Liner/Tubing   Bottom/Shoe MD (mKB)



        Cement


        Cement                Start Date/Time



        Cement                End Date/Time



        Cement                Job Type
        Cement                Job

        Cement                Casing string diameter
        Cement                Comments


        Cement                Top plug used (y/n)


        Cement                Bottom Plug used (y/n)



        Cement                Plug failed to bump (y/n)
        Cement                Plug Bump Pressure (bars)
          Report heading         MSL




          Cement                 Float Failed?

          Cement                 Pressure Release Date/Time




          Cement                 Full Returns (y/n)
          Cement                 Cement Volume Returns (m3)




          Cement                 Reciprocated (y/n)




          Cement                 Rotated (y/n)
          Cement Fluid Details




          Cement Fluid Details   Fluid Type
          Cement Fluid Details   Fluid Description


          Cement Fluid Details   Vol pumped (m3)
          Cement Fluid Details   Density (sg)
          Cement Fluid Details   Yield (ft3/sack)
          Cement Fluid Details   Mix Water Ratio (gal/sack)
          Cement Fluid Details   Free Water (%)


          Cement Fluid Details   Thick Time (hrs)
          Cement Fluid Details   Comments


Lillian   Report heading         Tight well
                           Report nr -> A sequence number.
                           Each day of operation is a new
Lillian   Report heading   number increment

                           HPHT - High Pressure - High
Lillian   Report heading   Temperatur
Lillian   Report heading   - Pressure

Lillian   Report heading   - Temperature




Lillian   Report heading   RIGTYPE
Lillian   Report heading   Period of operation
RDL Designation                                    RDL Definition

                                            A date and time
DATE AND TIME OF START OF DAILY DRILLING REPORT PERIOD that is the point in time at which a drilling report period




                                            A daily drilling report section class that
                                            groups classes specified to be bit data
DAILY DRILLING REPORT BIT DATA SECTION CLASSinformation in the Daily Drilling Report.
                                            A nominal outside diameter that is the
DRILL BIT NOMINAL OUTSIDE DIAMETER          nominal outside diameter of a drill bit.




DRILL BIT SEQUENCE NUMBER
MANUFACTURING COMPANY NAME REFERENCE
MANUFACTURERS PRODUCT IDENTIFICATION CODE
SERIAL NUMBER
                                        TFA (Total Flow Area) for bit



                                                   Measured depth at start of drilling with current bit




                                                   According to IADC. 7 qualifications




                                                   Max RPM for run
                                                   Max circ for run
                                                   Max SPP (Stand Pipe Pressure) in Run
                                                   Depth drilled accumulated (mMD)
                                                   Hours drilled accumulated


                                            Total for run
DRILL BIT RATE OF PENETRATION AT END OF REPORTING PERIOD




                                                   Max RPM for run
                                                   Max circ for run
                                                   Max SPP (Stand Pipe Pressure) in Run
                                                   Depth drilled accumulated (mMD)
                                                   Hours drilled accumulated
RUN DRILL BIT RATE OF PENETRATION                  Total for run

                                           A daily drilling report section class that
                                           groups classes specified to be casing type
                                           data
DAILY DRILLING REPORT CASING TYPE SECTION CLASSinformation in the Daily Drilling Report.
                                           C = Casing/ L = Liner/T=Tubing
                                           Selection of: top, intermediate, production

DAILY DRILLING REPORT CASING TYPE COMMENTA comment that is a description for a casing type in a daily drilling repo
                                           A nominal outside diameter that is the nominal outside diameter of a w
NOMINAL OUTSIDE DIAMETER OF WELL CASING STRING
                                           A nominal inside diameter that is the nominal inside diameter of a wel
NOMINAL INSIDE DIAMETER OF WELL CASING STRING
NOMINAL WEIGHT OF WELL CASING STRING




                                           A daily drilling report section class that
                                           groups classes specified te be cement data
                                           information in the Daily Drilling Report.
DAILY DRILLING REPORT CEMENT DATA SECTION CLASS
                                           A date and time for start of activity that is the
                                           date and time for an activity involwing
DATE AND TIME FOR START OF CEMENTING       cementing in a oil and gas well.
                                           A date and time for end of activity that is the
                                           date and time for an activity involwing
                                           cementing in a oil and gas well. (This is
DATE AND TIME FOR END OF CEMENTING         when the cement is in place)




                                                   Job type + casing string diameter
                                                   Casing string diameter of the casing
                                                   cemented
DAILY DRILLING REPORT CEMENT COMMENT               A comment that is a comment for a cement job in a daily dri
                                                   A boolean that indicates if a top plug is used
                                                   or not. If used, the value is "Yes/Y". If not
CEMENT TOP PLUG INDICATOR                          used, value is "No/Blank".
                                                   A boolean that indicates if a bottom plug is
                                                   used or not. If used, the value is "Yes/Y". If
CEMENT BOTTOM PLUG INDICATOR                       not used, value is "No/Blank".
                                                   A boolean that indicates if a cement plug in a
                                                   well bumped or not. If the plug failed to
                                                   bump, the value is "Yes/Y". If the plug
CEMENT PLUG BUMP FAILURE INDICATOR                 bumped, the value is "No/Blank".
                                                   - Mean Sea Level - A tidal datum. The
                                                   arithmetic mean of hourly heights observed
MEAN SEA LEVEL                                     over the National Tidal Datum Epoch (19


                                                   A boolean that indicates if a float failed or
                                                   not. If the float failed, the value is "Yes/Y". If
FLOAT FAILURE INDICATOR                            the float did not fail, the value is "No/Blank".
                                                   When cement pumping is stoped and
                                                   pressure bled off.
                                                   A boolean that indicates if some or all of the
                                                   mud/circulation fluid comes back to the
                                                   surface after beeing pumped down the drill
                                                   pipe on a drilling rig during a cementing job.
                                                   If all mud circulation fluid comes back, the
                                                   value is "Yes/Y". If not, the value is
CEMENTING FULL RETURN INDICATOR                    "No/Blank".

                                                   A boolean that indicates if a casing string is
                                                   reciprocated or not. If the casing string is
                                                   reciprocated, the value is "Yes/Y". If the
                                                   casing string is not reciprocated, the value is
CASING STRING RECIPROCATED INDICATOR               "No/Blank".

                                                   A boolean that indicates if a casing string is
                                                   rotated or not. If the casing string is rotated
                                                   the value is "Yes/Y". If the casing string is not
CASING STRING ROTATED INDICATOR                    rotated, the value is "No/Blank".




                                          Types of fluid used during a cementing
CEMENTING FLUID TYPE CLASS                activity
DAILY DRILLING REPORT CEMENT FLUID COMMENTA comment that is a description for a cement job in a daily drilling repo



CEMENT FLUID DENSITY                               Density of a cement slurry.
CEMENT SLURRY FLUID YIELD POINT                    The fluid yield point of a cement slurry.
CEMENT SLURRY MIX TO WATER RATIO


                                         The duration that a cement slurry remains in
CEMENT THICKENING TIME                   a fluid state and is capable of being pumped.
DAILY DRILLING REPORT CEMENT FLUID COMMENTcomment that is a comment about the cement fluid details in a daily
                                         A
                                         A boolean that indicates if a well is tight or
                                         not. If tight the value is "True/1". If not tight
TIGHT WELL INDICATOR                     value is "False/0".
                                        A sequence number that gives the sequence
DAILY DRILLING REPORT SEQUENCE NUMBER   of the Daily Drilling report.


                                        Boolean (y/n)
                                        A pressure that is the expected pressure at the bottom of a well
                                        A bottomhole temperature thet is the
                                        expected bottomhole temperature




                                        A period that is a period in a daily drilling report measured from the sp
              SUPER CLASS                          Issues                            Note

n time at which a drilling report period started
                                                   for all sections with start
                                                   and end date time:
                                                   operation
                                                   perforation information
                                                   cement

                                                   lengths:
                                                   operations (depth at start
                                                   and end + difference)


                                          Sjekk WITMSL
              DAILY DRILLING REPORT SECTION CLASS

                                                   Bit diameter = hull diameter
                                                   Bitidentifikasjonsnummer/R
                                                   unnummer
                                                   Se Ptils beskrivelse.
                                                   Definisjon i RDL må
                                                   "spisses"

                                           codeMfg
              INDIVIDUAL IDENTIFICATION CODE
                                           TFA = Total Flow Area



g with current bit

                                                   Dull grade?
                                                   Sjekk IADC
                                                   Sjekk WITSML
                                                   Enum liste?
                                                   What does WOB stand for?
                                                   Does 'max' refer to design
                                                   limit, or is it max obtained in
                                                   the actual time period?
                                                   RPM?
                                                   Does 'max' refer to design limit, or is it max obtained in the actual time period?


                                                   Sum of intervals?
                                                   In RDL, with wrong entity
                                                   See: Datum Reference I
                                                   (Slide from Magne)
                                                   What does WOB stand for?
                                                   Does 'max' refer to design
                                                   limit, or is it max obtained in
                                                   the actual time period?
                                                   RPM?
                                                  Does 'max' refer to design limit, or is it max obtained in the actual time period?


                                        Sum of intervals?
                                        Super class in RDL, but with wrong entity
            DRILL BIT RATE OF PENETRATION



                                                  Sjekk WITSML


                                                  split in start and end time date, and add duration
or a casing type in a daily drilling report.
              NOMINAL OUTSIDE DIAMETER                                          Slide to illustrate will be created
                                                  List of possible selections, API 5CT Edition 8, annex C (January 1. 2006)
              NOMINAL INSIDE DIAMETER                                           Slide to illustrate will be created
                                                  List of possible selections, API 5CT Edition 8, annex C (January 1. 2006)
              NOMINAL WEIGHT                                                    Slide to illustrate will be created
                                                  List of possible selections, API 5CT Edition 8, annex C (January 1. 2006)
                                                                                Slide to illustrate will be created
                                                  List of possible selections, API 5CT Edition 8, annex C (January 1. 2006)
                                                                                Slide to illustrate will be created
                                                  List of possible selections, API 5CT Edition 8, annex C (January 1. 2006)
                                                  MD
                                                  True, measured, which depth?
                                                  True, measured, which depth?



                                        activity cementing? Vs material cement
            DAILY DRILLING REPORT SECTION CLASS


            DATE AND TIME FOR START OF ACTIVITY



            DATE AND TIME FOR END OF ACTIVITY
                                       List of standard jobs (e.g.
                                        • Casing and liner          WITSML:
                                       • Cement squeeze             primary, plug,
                                       • Cement plug)               squeeze, unknown                   http://w3.energistics.org/schema/witsml
                                                                    Delete
                                       reference to the job + diamater

                                                  A casing string connects the cementing job to the casing
nt for a cement job in a daily drilling report.


            BOOLEAN


            BOOLEAN



            BOOLEAN
            Theoretical value                     Pressure required to make plug bump or the pressure
              BOOLEAN

                                                     Duration wanted - when does it start, when does it end - difference - which pressure



                                                                                  Definisjon fra
                                                                                  boreekspert: x m3
                                                                                  sement inn gir x m3
              BOOLEAN                                                             mud ut.
                                                     Return of excess cement




              BOOLEAN




              BOOLEAN
                                                     Part of cement section - What is the relation to cement/cementing?
                                                                                 Finnes mange
                                                                                 typer. "Ref API…"
                                                                                 Statoil er usikre på
                                                                                 om man trenger å
                                                     WITSML Fluid type: Mud,     spesifisere
                                                     Wash, Spacer, Cement        sementsammenset
                                                     Slurry                      ning
or a cement job in a daily drilling report.                                      Fritekst
                                                                                 Volum av hver
                                                                                 sement type
                                                                                 pumpet.
              DENSITY LIQUID


                                                     Volume %


                                                      Tested in lab               Schlumberger Oilfield Glossary http://www.glossary.oilfield.slb
out the cement fluid details in a daily drilling report.


              BOOLEAN
              SEQUENCE NUMBER
                                                    PSA has definition
                                                    Check WITSML

ressure at the bottom of a well                     Optional (use if HPHT)        UoM

                                                    Optional (use if HPHT)        UoM

                                                                                  e.g. Movable types:
                                                                                  VESSEL
                                                                                  JACK-UP 3 LEGS
                                                                                  SEMISUB STEEL
                                                   Fixed/moveable                 JACKET 4 LEGS
                                                                                  JACK-UP 4 LEGS
                                                   Spud date (A date
y drilling report measured from the spud date to the day of reporting that is the date that well drilling equipment begin to bore into the earth s
ctual time period?
ctual time period?




energistics.org/schema/witsml_v1.3.1_data/XML_Examples/cementJob.xml
erence - which pressure




 http://www.glossary.oilfield.slb.com/Display.cfm?Term=thickening%20time
t begin to bore into the earth s surface for the purpose of drilling a well or a pilot hole) - report date
        DRILL BIT DRILL BIT CLASS_OF_INANIMATE_PHYSICAL_OBJECT
RDS5764367                            u82237                      Recorded
                                             2001.09.10 12:11:02.000
        CORE BIT CORE BIT CLASS_OF_INANIMATE_PHYSICAL_OBJECT
RDS5764564                            u82237                      Recorded
                                             1999.12.13 13:20:31.000
RDS5764688                            u82237
                            SPECIALIZATION   1999.12.13 12:50:22.000
        PDC       PDC       CLASS_OF_INANIMATE_PHYSICAL_OBJECT
RDS16809502 CORE BIT CORE BIT         u20645                      Incomplete
                                             2005.09.06 11:12:08.000
RDS16809547                           u20645
                            SPECIALIZATION   2005.09.06 11:13:31.000
        DIAMOND CORE BIT CORE BIT u20645
RDS16809724                                  2005.09.06 14:23:49.000
                  DIAMOND CLASS_OF_INANIMATE_PHYSICAL_OBJECT      Recorded
RDS16809769                           u20645
                            SPECIALIZATION   2005.09.06 14:24:42.000
        ROLLER BIT
RDS5764519        ROLLER BIT          u20645 2005.09.06 14:31:07.000
                            CLASS_OF_INANIMATE_PHYSICAL_OBJECT    Recorded
RDS5764705                            u20683
                            SPECIALIZATION   1999.02.10 08:57:11.000
        MILLED TOOTH ROLLER BIT
RDS17430029                 CLASS_OF_INANIMATE_PHYSICAL_OBJECT
                                      u20645
                  MILLED TOOTH ROLLER BIT                         Recorded
                                             2005.11.30 14:03:11.000
RDS17430074                           u20645
                            SPECIALIZATION   2005.11.30 14:03:42.000
        ROLLER REAMING BIT
RDS17430125                 CLASS_OF_INANIMATE_PHYSICAL_OBJECT
                  ROLLER REAMING BIT  u20645                      Recorded
                                             2005.11.30 14:07:59.000
RDS17430170                           u20645
                            SPECIALIZATION   2005.11.30 14:06:18.000
        INSERT ROLLER BIT CLASS_OF_INANIMATE_PHYSICAL_OBJECT
RDS17429729       INSERT ROLLER BIT u20645                        Recorded
                                             2005.11.30 13:52:27.000
RDS17429961                           u20645
                            SPECIALIZATION   2005.11.30 13:53:34.000
        PERCUSSION BIT
RDS5994374                  CLASS_OF_INANIMATE_PHYSICAL_OBJECT
                  PERCUSSION BIT      u20645                      Recorded
                                             1999.06.24 09:04:57.000
RDS5994419                            u20645
                            SPECIALIZATION   1999.06.24 09:06:29.000
        FISHTAIL BIT
RDS5994436                  CLASS_OF_INANIMATE_PHYSICAL_OBJECT
                  FISHTAIL BIT        u20645                      Recorded
                                             1999.06.24 09:07:55.000
RDS5994481                            u20645
                            SPECIALIZATION   1999.06.24 09:09:17.000
        SCREWTYPE BIT
RDS5994498                  CLASS_OF_INANIMATE_PHYSICAL_OBJECT
                  SCREWTYPE BIT       u20645                      Recorded
                                             1999.06.24 09:12:00.000
RDS5994543                            u20645
                            SPECIALIZATION   1999.06.24 09:12:51.000
        PDC                           u20645 2005.09.06 14:05:25.000
RDS5994560 BIT PDC BIT CLASS_OF_INANIMATE_PHYSICAL_OBJECT         Candidate
RDS5994605                            u20645
                            SPECIALIZATION   1999.06.24 09:15:17.000
RDS16809564                           u20645
                            SPECIALIZATION   2005.09.06 11:13:33.000
        DRILL BIT 3 NPS BIT 3 NPS
RDS16454403       DRILL               u20683 2005.02.09 15:05:10.000
                            CLASS_OF_INANIMATE_PHYSICAL_OBJECT    Incomplete
RDS16612673                           u20683
                            SPECIALIZATION   2005.02.11 09:36:54.000
        DRILL BIT 3 1/2 NPS 3 1/2 NPS u20683
RDS16454448                                  2005.02.09 15:05:10.000
                  DRILL BIT CLASS_OF_INANIMATE_PHYSICAL_OBJECT    Incomplete
RDS16612690                           u20683
                            SPECIALIZATION   2005.02.11 09:36:54.000
        DRILL BIT 4 NPS BIT 4 NPS
RDS16454313       DRILL               u20683 2005.02.09 15:05:09.000
                            CLASS_OF_INANIMATE_PHYSICAL_OBJECT    Incomplete
RDS16612826                           u20683
                            SPECIALIZATION   2005.02.11 09:36:56.000
        DRILL BIT 6 1/8 NPS 6 1/8 NPS u20683
RDS16443462                                  2005.02.09 14:40:46.000
                  DRILL BIT CLASS_OF_INANIMATE_PHYSICAL_OBJECT    Incomplete
RDS16612843                           u20683
                            SPECIALIZATION   2005.02.11 09:36:56.000
        DRILL BIT 6 NPS BIT 6 NPS
RDS16443507       DRILL               u20683 2005.02.09 14:40:47.000
                            CLASS_OF_INANIMATE_PHYSICAL_OBJECT    Incomplete
RDS16612860                           u20683
                            SPECIALIZATION   2005.02.11 09:36:56.000
        DRILL BIT 5 7/8 NPS 5 7/8 NPS u20683
RDS16454358                                  2005.02.09 15:05:09.000
                  DRILL BIT CLASS_OF_INANIMATE_PHYSICAL_OBJECT    Incomplete
RDS16612877                           u20683
                            SPECIALIZATION   2005.02.11 09:36:57.000
        DRILL BIT 5 3/4 NPS 5 3/4 NPS u20683
RDS16453998                                  2005.02.09 15:05:06.000
                  DRILL BIT CLASS_OF_INANIMATE_PHYSICAL_OBJECT    Incomplete
RDS16612894                           u20683
                            SPECIALIZATION   2005.02.11 09:36:57.000
        DRILL BIT 5 5/8 NPS 5 5/8 NPS u20683
RDS16454043                                  2005.02.09 15:05:06.000
                  DRILL BIT CLASS_OF_INANIMATE_PHYSICAL_OBJECT    Incomplete
RDS16612911                           u20683
                            SPECIALIZATION   2005.02.11 09:36:57.000
        DRILL BIT 5 1/4 NPS 5 1/4 NPS u20683
RDS16454088                                  2005.02.09 15:05:07.000
                  DRILL BIT CLASS_OF_INANIMATE_PHYSICAL_OBJECT    Incomplete
RDS16612928                           u20683
                            SPECIALIZATION   2005.02.11 09:36:57.000
        DRILL BIT 4 7/8 NPS 4 7/8 NPS u20683
RDS16454133                                  2005.02.09 15:05:07.000
                  DRILL BIT CLASS_OF_INANIMATE_PHYSICAL_OBJECT    Incomplete
RDS16612945                           u20683
                            SPECIALIZATION   2005.02.11 09:36:58.000
        DRILL BIT 4 3/4 NPS 4 3/4 NPS u20683
RDS16454178                                  2005.02.09 15:05:08.000
                  DRILL BIT CLASS_OF_INANIMATE_PHYSICAL_OBJECT    Incomplete
RDS16612962                           u20683
                            SPECIALIZATION   2005.02.11 09:36:58.000
        DRILL BIT 4 1/2 NPS 4 1/2 NPS u20683
RDS16454223                                  2005.02.09 15:05:08.000
                  DRILL BIT CLASS_OF_INANIMATE_PHYSICAL_OBJECT    Incomplete
RDS16612979                           u20683
                            SPECIALIZATION   2005.02.11 09:36:58.000
        DRILL BIT 4 1/8 NPS 4 1/8 NPS u20683
RDS16454268                                  2005.02.09 15:05:09.000
                  DRILL BIT CLASS_OF_INANIMATE_PHYSICAL_OBJECT    Incomplete
RDS16612996                           u20683
                            SPECIALIZATION   2005.02.11 09:36:58.000
        DRILL BIT 6 1/4 NPS 6 1/4 NPS u20683
RDS16443417                                  2005.02.09 14:40:46.000
                  DRILL BIT CLASS_OF_INANIMATE_PHYSICAL_OBJECT    Incomplete
RDS16613013                           u20683
                            SPECIALIZATION   2005.02.11 09:36:59.000
        DRILL BIT 12 NPS
RDS16443867                 CLASS_OF_INANIMATE_PHYSICAL_OBJECT
                  DRILL BIT 12 NPS     u20683                      Incomplete
                                              2005.02.09 14:40:51.000
RDS16613030                            u20683
                            SPECIALIZATION    2005.02.11 09:36:59.000
        DRILL BIT 11 NPS
RDS16443957                 CLASS_OF_INANIMATE_PHYSICAL_OBJECT
                  DRILL BIT 11 NPS     u20683                      Incomplete
                                              2005.02.09 14:40:52.000
RDS16613047                            u20683
                            SPECIALIZATION    2005.02.11 09:36:59.000
        DRILL BIT 10 5/8 NPS10 5/8 NPS u20683
RDS16444002                                   2005.02.09 14:40:53.000
                  DRILL BIT CLASS_OF_INANIMATE_PHYSICAL_OBJECT     Incomplete
RDS16613064                            u20683
                            SPECIALIZATION    2005.02.11 09:36:59.000
        DRILL BIT 9 7/8 NPS 9 7/8 NPS u20683
RDS16444047                                   2005.02.09 14:40:53.000
                  DRILL BIT CLASS_OF_INANIMATE_PHYSICAL_OBJECT     Incomplete
RDS16613081                            u20683
                            SPECIALIZATION    2005.02.11 09:36:59.000
        DRILL BIT 8 3/4 NPS 8 3/4 NPS u20683
RDS16444092                                   2005.02.09 14:40:54.000
                  DRILL BIT CLASS_OF_INANIMATE_PHYSICAL_OBJECT     Incomplete
RDS16613098                            u20683
                            SPECIALIZATION    2005.02.11 09:36:59.000
        DRILL BIT 8 1/2 NPS 8 1/2 NPS u20683
RDS16443552                                   2005.02.09 14:40:47.000
                  DRILL BIT CLASS_OF_INANIMATE_PHYSICAL_OBJECT     Incomplete
RDS16613115                            u20683
                            SPECIALIZATION    2005.02.11 09:37:00.000
        DRILL BIT 8 3/8 NPS 8 3/8 NPS u20683
RDS16443237                                   2005.02.09 14:40:42.000
                  DRILL BIT CLASS_OF_INANIMATE_PHYSICAL_OBJECT     Incomplete
RDS16613132                            u20683
                            SPECIALIZATION    2005.02.11 09:37:00.000
        DRILL BIT 7 7/8 NPS 7 7/8 NPS u20683
RDS16443282                                   2005.02.09 14:40:44.000
                  DRILL BIT CLASS_OF_INANIMATE_PHYSICAL_OBJECT     Incomplete
RDS16613149                            u20683
                            SPECIALIZATION    2005.02.11 09:37:00.000
        DRILL BIT 6 3/4 NPS 6 3/4 NPS u20683
RDS16443327                                   2005.02.09 14:40:45.000
                  DRILL BIT CLASS_OF_INANIMATE_PHYSICAL_OBJECT     Incomplete
RDS16613166                            u20683
                            SPECIALIZATION    2005.02.11 09:37:00.000
        DRILL BIT 6 1/2 NPS 6 1/2 NPS u20683
RDS16443372                                   2005.02.09 14:40:45.000
                  DRILL BIT CLASS_OF_INANIMATE_PHYSICAL_OBJECT     Incomplete
RDS16613183                            u20683
                            SPECIALIZATION    2005.02.11 09:37:00.000
        DRILL BIT 12 1/4 NPS12 1/4 NPS u20683
RDS16443822                                   2005.02.09 14:40:50.000
                  DRILL BIT CLASS_OF_INANIMATE_PHYSICAL_OBJECT     Incomplete
RDS16613200                            u20683
                            SPECIALIZATION    2005.02.11 09:37:01.000
        DRILL BIT 23 NPS
RDS16444407                 CLASS_OF_INANIMATE_PHYSICAL_OBJECT
                  DRILL BIT 23 NPS     u20683                      Incomplete
                                              2005.02.09 14:40:57.000
RDS16613217                            u20683
                            SPECIALIZATION    2005.02.11 09:37:01.000
        DRILL BIT 22 NPS
RDS16444497                 CLASS_OF_INANIMATE_PHYSICAL_OBJECT
                  DRILL BIT 22 NPS     u20683                      Incomplete
                                              2005.02.09 14:40:58.000
RDS16613234                            u20683
                            SPECIALIZATION    2005.02.11 09:37:01.000
        DRILL BIT 20 NPS
RDS16444542                 CLASS_OF_INANIMATE_PHYSICAL_OBJECT
                  DRILL BIT 20 NPS     u20683                      Incomplete
                                              2005.02.09 14:40:58.000
RDS16613251                            u20683
                            SPECIALIZATION    2005.02.11 09:37:01.000
        DRILL BIT 17 1/2 NPS17 1/2 NPS u20683
RDS16444587                                   2005.02.09 14:40:59.000
                  DRILL BIT CLASS_OF_INANIMATE_PHYSICAL_OBJECT     Incomplete
RDS16613268                            u20683
                            SPECIALIZATION    2005.02.11 09:37:01.000
        DRILL BIT 17 NPS
RDS16443912                 CLASS_OF_INANIMATE_PHYSICAL_OBJECT
                  DRILL BIT 17 NPS     u20683                      Incomplete
                                              2005.02.09 14:40:51.000
RDS16613285                            u20683
                            SPECIALIZATION    2005.02.11 09:37:02.000
        DRILL BIT 16 NPS
RDS16443597                 CLASS_OF_INANIMATE_PHYSICAL_OBJECT
                  DRILL BIT 16 NPS     u20683                      Incomplete
                                              2005.02.09 14:40:48.000
RDS16613302                            u20683
                            SPECIALIZATION    2005.02.11 09:37:02.000
        DRILL BIT 15 1/2 NPS15 1/2 NPS u20683
RDS16443642                                   2005.02.09 14:40:48.000
                  DRILL BIT CLASS_OF_INANIMATE_PHYSICAL_OBJECT     Incomplete
RDS16613319                            u20683
                            SPECIALIZATION    2005.02.11 09:37:02.000
        DRILL BIT 14 3/4 NPS14 3/4 NPS u20683
RDS16443687                                   2005.02.09 14:40:49.000
                  DRILL BIT CLASS_OF_INANIMATE_PHYSICAL_OBJECT     Incomplete
RDS16613336                            u20683
                            SPECIALIZATION    2005.02.11 09:37:02.000
        DRILL BIT 13 3/4 NPS13 3/4 NPS u20683
RDS16443732                                   2005.02.09 14:40:49.000
                  DRILL BIT CLASS_OF_INANIMATE_PHYSICAL_OBJECT     Incomplete
RDS16613353                            u20683
                            SPECIALIZATION    2005.02.11 09:37:03.000
        DRILL BIT 13 1/2 NPS13 1/2 NPS u20683
RDS16443777                                   2005.02.09 14:40:50.000
                  DRILL BIT CLASS_OF_INANIMATE_PHYSICAL_OBJECT     Incomplete
RDS16613370                            u20683
                            SPECIALIZATION    2005.02.11 09:37:03.000
        DRILL BIT 24 NPS
RDS16444362                 CLASS_OF_INANIMATE_PHYSICAL_OBJECT
                  DRILL BIT 24 NPS     u20683                      Incomplete
                                              2005.02.09 14:40:56.000
RDS16613387                            u20683
                            SPECIALIZATION    2005.02.11 09:37:03.000
        DRILL BIT 36 NPS
RDS16444227                 CLASS_OF_INANIMATE_PHYSICAL_OBJECT
                  DRILL BIT 36 NPS     u20683                      Incomplete
                                              2005.02.09 14:40:55.000
RDS16613523                            u20683
                            SPECIALIZATION    2005.02.11 09:37:04.000
        DRILL BIT 30 NPS
RDS16444272                 CLASS_OF_INANIMATE_PHYSICAL_OBJECT
                  DRILL BIT 30 NPS     u20683                      Incomplete
                                              2005.02.09 14:40:55.000
RDS16613540                            u20683
                            SPECIALIZATION    2005.02.11 09:37:05.000
        DRILL BIT 26 NPS
RDS16444317                 CLASS_OF_INANIMATE_PHYSICAL_OBJECT
                  DRILL BIT 26 NPS     u20683                      Incomplete
                                              2005.02.09 14:40:56.000
RDS16613557                            u20683
                            SPECIALIZATION    2005.02.11 09:37:05.000
        TSD                            u20645 2005.09.06 14:06:37.000
RDS16809600 BIT TSD BIT CLASS_OF_INANIMATE_PHYSICAL_OBJECT         Recorded
RDS16809645                            u20645
                            SPECIALIZATION    2005.09.06 14:06:52.000
        DIAMOND BIT
RDS16809662             CLASS_OF_INANIMATE_PHYSICAL_OBJECT
                DIAMOND BIT      u20645                      Recorded
                                        2005.09.06 14:22:22.000
RDS16809707                      u20645
                        SPECIALIZATION  2005.09.06 14:18:36.000
RDS16809786                      u20645
                        SPECIALIZATION  2005.09.06 14:24:44.000
             An artefact which is the cutting or pulverizing tool or head in the end of a drillstring.
             A rotating hollow drill bit for cutting and removing plug shaped rock samples from the bottom of the wellbore.

Incomplete   A core bit having PDC cutters.

             A core bit that uses natural diamonds.

             A drill bit having one or more separately rotating cone shaped cutting tools. The bit uses a crushing motion to penet

             A roller bit where the cutting tools are teeth milled out on the roller cone surface.

             A reaming bit using roller cutters.

             A roller bit where the cutting tools are PDC or tungesten carbide inserts set in holes in the cone.

             A bit design to disintegrate a formation by repetitive striking action

             A bit with the cutting tool formed as a fish tail

             A bit with the cutting tool formed as a helix screw

                                                                                               with Schlumberger Oilfield milling
             A drill bit that uses polycrystalline diamond compact (PDC) cutters to shear rock Ref.:a continuos scraping orGlossa


Incomplete   A drillbit with a diameter of 3 inches.

Incomplete   A drillbit with a diameter of 3 1/2 inches.

Incomplete   A drillbit with a diameter of 4 inches.

Incomplete   A drillbit with a diameter of 6 1/8 inches.

Incomplete   A drillbit with a diameter of 6 inches.

Incomplete   A drillbit with a diameter of 5 7/8 inches.

Incomplete   A drillbit with a diameter of 5 3/4 inches.

Incomplete   A drillbit with a diameter of 5 5/8 inches.

Incomplete   A drillbit with a diameter of 5 1/4 inches.

Incomplete   A drillbit with a diameter of 4 7/8 inches.

Incomplete   A drillbit with a diameter of 4 3/4 inches.

Incomplete   A drillbit with a diameter of 4 1/2 inches.

Incomplete   A drillbit with a diameter of 4 1/8 inches.

Incomplete   A drillbit with a diameter of 6 1/4 inches.
Incomplete   A drillbit with a diameter of 12 inches.

Incomplete   A drillbit with a diameter of 11 inches.

Incomplete   A drillbit with a diameter of 10 5/8 inches.

Incomplete   A drillbit with a diameter of 9 7/8 inches.

Incomplete   A drillbit with a diameter of 8 3/4 inches.

Incomplete   A drillbit with a diameter of 8 1/2 inches.

Incomplete   A drillbit with a diameter of 8 3/8 inches.

Incomplete   A drillbit with a diameter of 7 7/8 inches.

Incomplete   A drillbit with a diameter of 6 3/4 inches.

Incomplete   A drillbit with a diameter of 6 1/2 inches.

Incomplete   A drillbit with a diameter of 12 1/4 inches.

Incomplete   A drillbit with a diameter of 23 inches.

Incomplete   A drillbit with a diameter of 22 inches.

Incomplete   A drillbit with a diameter of 20 inches.

Incomplete   A drillbit with a diameter of 17 1/2 inches.

Incomplete   A drillbit with a diameter of 17 inches.

Incomplete   A drillbit with a diameter of 16 inches.

Incomplete   A drillbit with a diameter of 15 1/2 inches.

Incomplete   A drillbit with a diameter of 14 3/4 inches.

Incomplete   A drillbit with a diameter of 13 3/4 inches.

Incomplete   A drillbit with a diameter of 13 1/2 inches.

Incomplete   A drillbit with a diameter of 24 inches.

Incomplete   A drillbit with a diameter of 36 inches.

Incomplete   A drillbit with a diameter of 30 inches.

Incomplete   A drillbit with a diameter of 26 inches.

                                                                                                Ref.: Schlumberger milling motion
             A drill bit that uses thermally stable diamond (TSD) cutters to shear rock with a continuos scraping orOilfield Glossa
                                                                                Ref.: Schlumberger Oilfield Glossa
A drill bit that uses natural diamonds to shear rock, the diamonds usually embedded into a carbide base matrix.
 m the bottom of the wellbore.




e bit uses a crushing motion to penetrate the rock.




holes in the cone.




  Ref.: Schlumberger Oilfield Glossary
Ref.: Schlumberger Oilfield Glossary
Ref.: Schlumberger Oilfield Glossary

								
To top