MEC Mechanics - Calgary Board of Education

Document Sample
MEC Mechanics - Calgary Board of Education Powered By Docstoc
					                                                           MEC: MECHANICS
                                                       Scope and Sequence Mapping

                       Introductory                                    Intermediate                                  Advanced
         MEC1010: MODES & MECHANISMS                      MEC2010: VEHICLE DETAILING                  MEC3010: BUYING & SELLING
         Students research, design, build and test a      Students develop the skills required to     VEHICLES
         model of a transportation vehicle, using a       restore and enhance the exterior finishes   Students develop the skills required to
         simple power source, common materials            of a vehicle.                               make an informed purchase or sale of a
         and tools.                                       Prerequisite: None                          vehicle.
         Prerequisite: None                                                                           Prerequisite: None

         MEC1015: MECHANICS TOOLS &                       MEC2020: VEHICLE MAINTENANCE                MEC3020: VEHICLE VALUE
         MATERIALS                                        Students perform the basic service          APPRAISAL
         Students develop knowledge, skills and           requirements necessary to ensure            Students demonstrate the procedures
         attitudes in the safe use of specialty hand      adequate maintenance of a motor vehicle.    used by the vehicle repair industry to
         tools, measuring tools and fasteners.            Prerequisite:                               estimate the cost of a repair and the
         Prerequisite: None                               MEC1020: Vehicle Service & Care             market value of a vehicle.
                                                                                                      Prerequisite:
                                                                                                      MEC2020: Vehicle Maintenance

         MEC1020: VEHICLE SERVICE & CARE                  MEC2030: LUBRICATION & COOLING              MEC3030: ENGINE DIAGNOSIS
         Students develop the knowledge, skills           Students diagnose, maintain and service     Students learn to diagnose the condition of
         and attitudes to care for and service a          the lubrication and cooling systems of a    an engine for worn or damaged parts
         motor vehicle.                                   typical four-cycle gasoline engine.         and/or improper adjustments.
         Prerequisite: None                               Prerequisite:                               Prerequisite:
                                                          MEC1040: Engine Fundamentals                MEC1040: Engine Fundamentals

         MEC1040: ENGINE FUNDAMENTALS                     MEC2040: FUEL & EXHAUST SYSTEMS             MEC3040: ENGINE TUNE-UP
         Students investigate and describe                Students diagnose, maintain and service     Students diagnose service and repair
         operating principles, construction and           the fuel and exhaust system of a typical    engine, fuel, ignition, charging and starting
         applications of engines.                         four-cycle gasoline engine.                 systems.
         Prerequisite: None                               Prerequisite:                               Prerequisite:
                                                          MEC1040: Engine Fundamentals                MEC3030: Engine Diagnosis



TMT - MEC: MECHANICS - Scope and Sequence Mapping                                                                                         11/29/2011
Career and Technology Studies                                                                                                                    1/7
Calgary Board of Education
         MEC1090: ELECTRICAL                        MEC2050: ALTERNATIVE FUEL                   MEC3050: ENGINE REPLACEMENT
         FUNDAMENTALS                               ENGINES                                     Students remove and install an engine in a
         Students identify and describe the         Students determine alternative fuels used   chassis.
         operating principles and applications of   to power motor vehicles.                    Prerequisite:
         electricity.                               Prerequisite: None                          MEC1040: Engine Fundamentals
         Prerequisite: None

         MEC1110: PNEUMATICS &                      MEC2060: IGNITION SYSTEMS                   MEC3060: ENGINE RECONDITIONING
         HYDRAULICS                                 Students identify the basic components      – HEAD
         Students identify and describe the         and parts of ignition systems used on       Students determine the need for service
         operating principles and applications of   internal combustion engines and service     and perform the required service on the
         pneumatic and hydraulic systems.           and repair an ignition system.              cylinder head and related components of
         Prerequisite: None                         Prerequisite: None                          an engine.
                                                                                                Prerequisite:
                                                                                                MEC1040: Engine Fundamentals

         MEC1130: MECHANICAL SYSTEMS                MEC2070: EMISSION CONTROLS                  MEC3070: ENGINE RECONDITIONING –
         Students identify and describe the         Students describe the importance of         BLOCK
         operating principles and applications of   controlling emissions and the technology    Students determine the need for service
         mechanisms used to transmit and control    applied to vehicles to meet prescribed      and perform service on a cylinder block
         mechanical energy.                         standards.                                  assembly and related components of an
         Prerequisite: None                         Prerequisite: None                          engine.
                                                                                                Prerequisite:
                                                                                                MEC1040: Engine Fundamentals

         MEC1150: RIDE & CONTROL SYSTEMS            MEC2090: ELECTRICAL COMPONENTS              MEC3080: ALTERNATIVE ENERGY
         Students develop a basic knowledge of      Students identify and describe the basic    SYSTEMS
         ride and control systems associated with   use and testing of the electrical           Students describe why vehicle
         vehicles.                                  components of a typical motor vehicle.      manufacturers continue to build the crank-
         Prerequisite: None                         Prerequisite:                               piston internal combustion gasoline
                                                    MEC1090: Electrical Fundamentals            engine. Students also identify and
                                                                                                describe future engine designs.
                                                                                                Prerequisite:
                                                                                                MEC2050: Alternative Fuel Engines




TMT - MEC: MECHANICS - Scope and Sequence Mapping                                                                                 11/29/2011
Career and Technology Studies                                                                                                            2/7
Calgary Board of Education
         MEC1160: STRUCTURES &                      MEC2100: POWER ASSIST                         MEC3090: COMPUTER SYSTEMS
         MATERIALS                                  ACCESSORIES                                   Students provide an overview of the
         Students identify the types of materials   Students identify and explain the function    applications of computer management
         and components used in vehicle             of components and parts of power assist       systems used in modern vehicles.
         construction.                              accessories.                                  Prerequisite:
         Prerequisite: None                         Prerequisite:                                 MEC2070: Emission Controls
                                                    MEC1110: Pneumatics & Hydraulics

         MEC1165: MECHANICS WELDING                 MEC2110: BRAKING SYSTEMS                      MEC3100: SAFETY SYSTEMS
         FUNDAMENTALS                               Students develop the necessary                Students describe how safety systems can
         Students perform metal heating and         knowledge, skills and attitudes to diagnose   be tested, diagnosed, replaced or
         cutting operations safely using            service and maintain a braking system         repaired.
         oxyacetylene equipment, and perform        according to accepted trade practices.        Prerequisite: MEC2100: Power Assist
         non-structural welding using Gas Metal     Prerequisite:                                 Accessories
         Arc Welding (GMAW) equipment.              MEC1110: Pneumatics & Hydraulics
         Prerequisite:
         MEC1015: Mechanics Tools & Materials

         MEC1170: METAL FORMING &                   MEC2120: HYDRAULIC ACCESSORIES                MEC3110: CLIMATE CONTROL
         FINISHING                                  Students develop a basic knowledge of         Students expand their knowledge of the
         Students repair and re-form damaged        hydraulic components, applications and        purpose, operation and servicing of
         metal panels.                              servicing techniques.                         standard heating and air conditioning
         Prerequisite:                              Prerequisite:                                 systems.
         MEC1160: Structures & Materials            MEC1110: Pneumatics & Hydraulics              Prerequisite:
                                                                                                  MEC2030: Lubrication & Cooling

         MEC1190: SURFACE PREPARATION 1             MEC2130: DRIVE LINE                           MEC3120: POWER ASSISTING
         Students assess the state of a painted     Students identify the purpose, describe the   Students further develop their knowledge
         surface and use appropriate restoration    operation and perform the servicing of a      of the purpose, operation, service and
         procedures.                                vehicle drive line.                           repair of pneumatic, hydraulic and electric
         Prerequisite: None                         Prerequisite:                                 power assist devices.
                                                    MEC1130: Mechanical Systems                   Prerequisite:
                                                                                                  MEC2100: Power Assist Accessories




TMT - MEC: MECHANICS - Scope and Sequence Mapping                                                                                    11/29/2011
Career and Technology Studies                                                                                                               3/7
Calgary Board of Education
         MEC1910: MEC PROJECT A                     MEC2140: TRANSMISSIONS/                   MEC3130: AUTOMATIC
         Students develop project design and        TRANSAXLES                                TRANSMISSIONS
         management skills to extend and enhance    Students perform inspection service and   Students develop knowledge of automatic
         competencies and skills in other CTS       repair procedures on manual               transmissions and transaxles and skills in
         courses through contexts that are          transmissions, transaxles and clutch      diagnosing and executing minor automatic
         personally relevant                        assemblies.                               transmission and transaxle repair
         Prerequisite: None                         Prerequisite:                             requirements.
                                                    MEC2130: Drive Line                       Prerequisite:
                                                                                              MEC1110: Pneumatics & Hydraulics

                                                    MEC2150: SUSPENSION SYSTEMS               MEC3140: DRIVE TRAIN REPAIR
                                                    Students develop the knowledge, skills    Students perform overhauls on clutch,
                                                    and attitudes necessary to service and    transmission and differential assemblies.
                                                    maintain vehicle suspension systems.      Prerequisite:
                                                    Prerequisite:                             MEC2130: Drive Line
                                                    MEC1150: Ride & Control Systems

                                                    MEC2160: STEERING SYSTEMS                 MEC3150: WHEEL ALIGNMENT
                                                    Students develop the knowledge, skills    Students develop the knowledge, skills
                                                    and attitudes necessary to maintain a     and attitudes necessary for repairing and
                                                    steering system.                          aligning various vehicle steering systems.
                                                    Prerequisite:                             Prerequisite:
                                                    MEC1150: Ride & Control Systems           MEC2150: Suspension Systems


                                                    MEC2170: METAL REPAIR & FINISHING         MEC3160: BODY REPAIR ESTIMATION
                                                    Students analyze and repair metal         Students apply knowledge in estimating,
                                                    damage.                                   including paying close attention to detail in
                                                    Prerequisite:                             determining the cost of a repair.
                                                    MEC1170: Metal Forming & Finishing        Prerequisite:
                                                                                              MEC1160: Structures & Materials




TMT - MEC: MECHANICS - Scope and Sequence Mapping                                                                                 11/29/2011
Career and Technology Studies                                                                                                            4/7
Calgary Board of Education
                                                    MEC2180: TRIM REPLACEMENT                      MEC3170: DAMAGE ANALYSIS
                                                    Students demonstrate the removal and           Students identify and examine physical
                                                    repair of trim parts, with an emphasis on      damage caused by collisions and learn
                                                    removal and installation without damage.       cost estimating procedures.
                                                    Prerequisite: None                             Prerequisite:
                                                                                                   MEC2170: Metal Repair & Finishing

                                                    MEC2190: SURFACE PREPARATION 2                 MEC3180: DAMAGE REPAIR 1
                                                    Students perform advanced surface              Students examine the methods used to
                                                    preparations.                                  complete a repair involving removing,
                                                    Prerequisite:                                  replacing and aligning body parts.
                                                    MEC1190: Surface Preparation 1                 Prerequisite:
                                                                                                   MEC2170: Metal Repair & Finishing

                                                    MEC2200: REFINISHING 1                         MEC3190: DAMAGE REPAIR 2
                                                    Students demonstrate metal surface             Students examine methods used to
                                                    refinishing procedures.                        complete a collision repair involving
                                                    Prerequisite:                                  unibody parts replacement and frame
                                                    MEC2190: Surface Preparation 2                 correction
                                                                                                   Prerequisite:
                                                                                                   MEC3180: Damage Repair 1

                                                    MEC2210: TOUCH-UP & FINISHING                  MEC3200: REFINISHING 2
                                                    Students determine and use the                 Students demonstrate finishing skills and
                                                    appropriate materials, tools and processes     techniques related to the preparation and
                                                    for minor surface repairs.                     application of metallic paints.
                                                    Prerequisite:                                  Prerequisite:
                                                    MEC2200: Refinishing 1                         MEC2200: Refinishing 1

                                                    MEC2220: INTERIOR REPAIRS                      MEC3210: PLASTIC & FIBREGLASS
                                                    Students search for and use the                Students determine the types of plastic
                                                    appropriate products and techniques to         and fibreglass materials required for
                                                    maintain vehicle interior surface materials.   repairs and perform appropriate repair
                                                    Prerequisite:                                  procedures.
                                                    MEC1160: Structures & Materials                Prerequisite:
                                                                                                   MEC1160: Structures & Materials



TMT - MEC: MECHANICS - Scope and Sequence Mapping                                                                                    11/29/2011
Career and Technology Studies                                                                                                               5/7
Calgary Board of Education
                                                    MEC2910: MEC PROJECT B                       MEC3220: GLASS REPLACEMENT
                                                    Students develop project design and          Students demonstrate knowledge, skills
                                                    management skills to extend and enhance      and practice related to vehicle glass
                                                    competencies and skills in other CTS         installation and adjustment.
                                                    courses through contexts that are            Prerequisite:
                                                    personally relevant.                         MEC2180: Trim Replacement
                                                    Prerequisite: None

                                                    MEC2920: MEC PROJECT C                       MEC3230: REFINISHING 3
                                                    Students develop project design and          Students demonstrate knowledge and
                                                    management skills to extend and enhance      skills of advanced finishing techniques,
                                                    competencies and skills in other CTS         including custom painting, mixing, tinting,
                                                    courses through contexts that are            colour and texture matching.
                                                    personally relevant.                         Prerequisite: MEC3200: Refinishing 2
                                                    Prerequisite: None

                                                    MEC2950: MEC INTERMEDIATE                    MEC3910: MEC PROJECT D
                                                    PRACTICUM                                    Students develop project design and
                                                    Students apply prior learning and            management skills to extend and enhance
                                                    demonstrate the attitudes, skills and        competencies and skills in other CTS
                                                    knowledge required by an external            courses through contexts that are
                                                    organization to achieve a                    personally relevant.
                                                    credential/credentials or an articulation.   Prerequisite: None
                                                    Prerequisite: None

                                                                                                 MEC3920: MEC PROJECT E
                                                                                                 Students develop project design and
                                                                                                 management skills to extend and enhance
                                                                                                 competencies and skills in other CTS
                                                                                                 courses through contexts that are
                                                                                                 personally relevant.
                                                                                                 Prerequisite: None

                                                                                                 MEC3950: MEC ADVANCED
                                                                                                 PRACTICUM
                                                                                                 Students apply prior learning and
                                                                                                 demonstrate the attitudes, skills and
                                                                                                 knowledge required by an external
TMT - MEC: MECHANICS - Scope and Sequence Mapping                                                                                    11/29/2011
Career and Technology Studies                                                                                                               6/7
Calgary Board of Education
                                                    organization to achieve a
                                                    credential/credentials or an articulation.
                                                    Prerequisite: None




TMT - MEC: MECHANICS - Scope and Sequence Mapping                                       11/29/2011
Career and Technology Studies                                                                  7/7
Calgary Board of Education

				
DOCUMENT INFO
Shared By:
Categories:
Tags:
Stats:
views:4
posted:11/29/2011
language:English
pages:7