Get documents about "Instructions
Document Sample
INSTRUCTIONS K9DCI@arrl.net noskosteve@yahoo.com Vers 3.6bcu
Set up Set the Com port name and baud rate in the Control Sheet over by cell U1.
NOTE: To change baud rate on the Radio use menu 56 then cycle the radio power to change it.
CONTROL SHEET
A - Tune VFO A You can enter a Frequency, Mode & Filter setting in the spreadsheet by typing, pasting, etc.
With the "Tune VFO A box checked, clicking on a row will tune the radio to that frequency.
Click away, use arrow keys - whatever selects cells and it'll tune.
Leave Tune VFO A Box checked and the radio will tune the VFO to the selected frequency when you
B - Read radio Select an EMPTY row and click the "Read Radio" button and the radio's Frequency, Mode and Filter set
C - Filter Prefs Click the Filter "Prefs" button and you can select the filter settings for the Narrow, Mid and Wide setting
Because of the complexity of this feature of the radio, I chose to have the Wide, Medium and Narrow
E. MENU Settings The pop up menus change the current menu values.
MENU A / B
When you change between MENU A and B, all the pop-um menus in the sheet are updated from the
Copying From Control Sheet to Memory Sheet
You can copy the Control Sheet comment into the Memory Sheet Name, but only 7 characters are sto
Copy both frequency and Mode. When you download to the memories, the other fields will auto fill w
MEMORIES
E - Memory "Channels" [ I prefer "Memory Locations" or just plain "Memories". ]
You can Upload the Memories from the Radio and Download them back into the Radio.
You specify a start and end memory for upload and download to transfer a smaller section of memory.
Tune Mem You can tune to any radio memory with a Click. Select anywhere in the appropriate row and click the Tu
OR Check the "Tune Mem" Box and just select anywhere in a memory Row, similar to the operatio
Leave the Tune Mem box checked and the radio will return to the selected memory in the radio w
You can enter and edit memories in the sheet using any normal Excel techniques Please ONLY Paste V
HOWEVER, if you paste, only Paste VALUES; to keep the formatting.
You only need to enter Frequency and Mode for simple operation. Other fields will fill with defaults when
Enter frequencies in kHz.
Enter Offset and freq. Step in KHz.
When you enter Mode, the default step for that mode appears.
NOTE: Frequency step does not make any sense in memory mode; UNLESS you transfer it to VFO [
For Split operation, enter both the Receive and Transmit frequency and mode.. Freq AND Mode may b
To use the Auto-Offset for repeaters, enter the offset, but DO NOT enter transmit frequency.
To use Tx Shift, Offset and Reverse, There must be NO Transmit freq. entered.
Note: Offset, Reverse, CTCSS, DCS, Scan Skip and Scan Group parameters are shown and held in the
For reverse you can enter *, r or R. Enter anything else, and it will change to "Rev" when you download
For Skip, you can enter *, s, or S. Enter anything else, and it will change to "skip" when you download to
You can enter abbreviations for Mode. There is a list to the right of memory zero.
You can enter CTCSS frequencies without the decimal part. e.g. 114 for 114.8 It self corrects when yo
Some items are self correcting when you enter them (Name length, Mode, Step, CTCSS values,
If left blank, some items will fill with defaults when you download them into the radio. (Step, Offset Subau
You can save many of these sheets with your frequencies.
You can even have two or more running at once.
Special NOTE: If you leave the Sub receiver in memory mode, EVEN IF IT IS OFF, you will not be able to change the
DO NOT change any of the cells to the right of the memory data.
SATELLITE MEMORIES
D - Sat Memory Upload satellite memories from the radio and set up an area in the sheet to save them [Click in an EM
Management The state of the radio is restored when complete [the operating registers are needed for Sat mem ope
Select a blank cell in the area where you want the data to go BELOW the gray row and below any pre
They all go DIRECTLY BELOW EACH OTHER [Column widths are automatically re-adjusted to m
Then click the Upload button.
CAUTION: This version allows you to overwrite previously saved memory banks, so BE CAREFUL w
You can have many groups of 10 Satellite memories in that sheet.
Download satellite memories to the radio from the sheet.
The state of the radio is restored when complete [the operating registers are needed for Sat mem ope
Click anywhere in the desired Satellite data area, then click the Download button.
Data uploaded from the radio is stored in raw format and may be edited in Excel.
NOTE: You can use several memories to store frequencies adjusted for Doppler and just change
Remember, at AOS you listen high and transmit low. Then, you gradually listen lower and lower a
I may add Doppler correction for the transmit frequency, based on the receiver tuning, later.
****** NOTE **** At the top of the satellite sheet, the Sat memory "set up" area [is now complete in this version] has Po
You may use it.
Please note that if you have the speech synthesizer installed,
It will "stutter", saying "VFO, VFO" because there are several commands to set Frequency,
Mode and Filter settings and each command triggers a speech readout.
Because this takes varying times, I am unable to silence it and return so only the last appropriate th
IF there is an error message, you can dismiss it and save the sheet. No data will be lost. Then QUIT Ex
If you have continuing errors OR an Error message pops up, do the following.
1 Note what you were doing
2 Copy the message in the dialog box. Screen shot by pressing ALT-Prnt Scrn; Paste into email or
3 If a message box pops up with e button, click it and copy the line that is Yellow.
4 You can close and save the worksheet and quit Excel. You shouldn't loose any data.
5 Send me all the above information AND the sheet, if possible.
Version History and notes.
Version information and notes
1 Command tester from TH-F6 sheet
5 Adapted 706 sheet
6 Start filter Preferences.
6rel Released version
Added instructions page & removed un used routines.
7 Expand Prefs. Add Menu Pop ups.
8 Fixed some popup value ranges
Added Command list sheet with sort buttons.
Added RF Gain
1.0 Start Satellite memory management
Added the headings and column width MACROS.
1.1 First working version of radio state reading and restoring.
Get to memory zero routine finished.
Rearrange subroutines and improve Send Cmd and Interrogate Radio subs.
Read Sat memories routine functional.
Add restoration of Mem mode and number if initially enabled.
Find start of data area routine.
1.2 Start doing Download to radio routine(s)
Coded Doweled, but not debugged.
Started Same-Band check.
1.A1443 New same band mitigation method
Removed the MULT-CH part of the SA commend.
Turn Beep off during Sat Mem ops, Restore to sheet
Cleaned up for general release
1.3 released
1.4 Added TNC On/Off & Baud for Alvaro.
Added TNC BaudComboBox w/list, 2 TNC_prefs w/ named cells & 2 TNC routines in Sheet1) & 1 TN
Completed the Sat men set up area
Fixed and tested the Same-Band prevention. Solved the TNC turn-off problem.
Added the Update radio to sheet message box.
Added some hazard prevention Message boxes.
1.4 Released to Alvaro.
Removed the command list sheet and its sorting module.
2.0 Start normal memory investigations
Mode finder / corrector
Subaudible freq finder and corrector
PL & DCS lookups
Raw Read mems done
Sheet fill done
Improved step tables
VFO limit memories readable with memory routine, but not altered.
Mem 300 (Call) readable, but needs location change routine.
2.1 Building of memory write string looks ok, could use testing for unusual situations.
Such as out of range freqs, LOWER CASE entries.
Non DCS codes
2.2 Preliminary Memory-Write routing done
Fixed Mode spell auto-correct with "Target"
TNC on/off slave checkbox added to Satl memory sheet (it double executes, but that's ok)
PL Type auto correct done.
PL Freq auto correct done
DCS Code auto correct done
Error Handler added to ThisWorkbook module, Worksheet_Change Sub.
Raw data columns named
2.3 Added Progress Dialog box to Radio Read & sheet update routines.
2.4 Progress Bar completed.
Fixed errors in command forming PL type lookup (non-integer) and Name repeat.
Verified non-existence and Removed Tx Step code.
Combine Temp1 & Temp2 now that Tx Step code is gone.
Make Radio write functional, but NOTE: By Leaving the two command string columns, you can h
2.4-B Final investigation for Tx Step completed.
Fixed non split sheet filling > blank Tx Fr, Mode & Step on non split
Program them as zeros, but they read same as Rx, so don't fill sheet Tx stuff.
Determined max offset to be 59950 (50 kc steps only)
Split can now be different Freq and/or modes.
Added correction for Mem name length. This Beep doesn't work. Application.EnableSound = Tru
Beep
Dual step code restored (can't verify validity of dual step BECAUSE I can't program CH 24 & 25.
Looking .................
Auto entry default / corrections made in the Command String forming routine for Step, Offset, Revers
Added Progress Bar Download
Changed the Control Sheet red-cell run flag to an X. Search "ColorIndex" ~ 9 places
2.5 Add Progress bar to memory Write.
Set to VFO A for tuning
Removed Temp2
3 Auto-default on download for PL & DCS tones.
Added rounding of Offset to nearest 50 kc
Variables for Rcol & Tcol
Step entries put on an auto correct lookup with defaults and limits
Changed Satellite set up area border.
Added auto formatting when opening the sheet.
Alvaro has problems Uploading, I suspect rapid fire commands...
Added fast compute delay loop to SendACmd, SendACmd2 and Interrogate1 & 2.
Timer tests conducted
17 ms delay installed in Interrogate 2.
17 ms delay added to SendACmd2
18 ms delay added to SendACmd. Released to Alvaro, But it didn't work correctly
3.1 Added Display Brightness ComboBox
Main Dial Tuning rate
Added CW Sidetone Freq
3.2 Interleaved the row convert and memory write.
Interleaved the memory read and row update.
Fixed (Removed) remaining Tx Step instruction
Added auto correction to memory limit numbers.
Added Main dial Tune rate pref.
Added antenna selection prefs. (I can't get the non-operation fix working)
Got rid of trailing spaces when entering and getting Memories from Radio, for pasting into Control Sh
Changed Freq on Memories to kHz for Cut / Paste compatibility with the Control Sheet.
Removed source of the 1501/CW problem - fast compute delay loop to SendACmd, SendACmd2 an
General Cleanup.
3.3 Added Tune Mem, but cleaned up and messed up something. Restarted with vers 32.
3.4 Added Memory Tune with a Click
Added Memory Tune by selection just like Control sheet
Made the Update on start up dialog appear over the control sheet.
3.5 Added the Update Sheet/Radio/None Dialog (Form) & the functionality.
Added Read version of all existing Radio Functions EXCEPT TX MonitorOn/Off sub. It is a synthesized f
Puzzled by some Prefs Cells being String and some numbers.
***** CW Pitch IF Filter sub Needs CW mode check
Added Menu Select w/auto-Updating & Wait Cursor.
Return to default cursor at all close ports
Added switch to mode when changing sheets
Turned off Events during Satellite sheet formatting
3.6 Corrected default Mode Codes to 0 & 1 (from 1 & 2) in Module T_R-1 Mode section.
Organized Debug.Print statements for each subroutine.
Added auto Offset code:
(1 loop, 2 Subs in Sheet3 Memories and citation in Workbook_Open) from David L. Salomon, KG4F
Also added Sub entry tags for his.
Other minor cleanup.
3.6a Added Multi-Freq Paste Auto Default Offset. Also removed ".Value"
3.6b Added 1240 offset, -20MHz. in common use
Added dual bound band limits for Auto Offset.
Added Auto-Mode FM for 2M, 220 & 440 FM bands
Added Freq check for auto Mode.
3.6bc Added PL Un-Aware MsgBox. Cleaned Code
Other features to consider:
General
Add settings
Step size
Transverter ON/OFF
PF key function
MULT-ch tuning on off
Equalizer
DSP Filter BW
RIT Freq.
Make a universal Error box subroutine that shows the error message.
Memory Sheet
Work on non-response errors (disconnect radio)
Should lock cells containing tables.
Do a save and restore radio state when loading / Saving normal memories.
Column sort buttons
Random order listing
Auto-BandPlan Offsets WITH BOTH bounds to prevent invalid Tx freq error.
Fast baud too fast. Remove delay. Needs to read radio for non-complete situations.
Satellite Sheet
Not necessary to Add Progress bar to Satellite memory opns because operations are shown.
Fix the error at the end of a download. ?; is received to an EX015 (Speech level -0 command+D2
Control Sheet
VFO A, B, C Default & per location
Settings per frequency
Figure out how to fix the non-operation problem.
Need to arrange SendACmd for the Non-operate detect and normal tuning operations.
Vers 3.6bcu
e radio power to change it.
typing, pasting, etc.
to that frequency.
he selected frequency when you return to this sheet.
Frequency, Mode and Filter setting will be loaded into that row.
e Narrow, Mid and Wide settings
e the Wide, Medium and Narrow choices with selectable settings.
the sheet are updated from the radio.
me, but only 7 characters are stored in TS-2000 memory Names.
es, the other fields will auto fill with defaults.
into the Radio.
a smaller section of memory.
appropriate row and click the Tune Mem button.
mory Row, similar to the operation of the Control Sheet.
e selected memory in the radio when you return to this sheet.
chniques Please ONLY Paste VALUES to preserve formatting.
er fields will fill with defaults when you Download to the Radio.
UNLESS you transfer it to VFO [M>VFO button] .
mode.. Freq AND Mode may be different.
enter transmit frequency.
t freq. entered.
meters are shown and held in the Radio's memories whether used or not.
ge to "Rev" when you download to the radio.
e to "skip" when you download to the radio.
r 114.8 It self corrects when you enter.
de, Step, CTCSS values,
to the radio. (Step, Offset Subaudible, Scan skip, Scan Group)
ou will not be able to change the memory it is on.
et to save them [Click in an EMPTY AREA FIRST}
ers are needed for Sat mem operations].
the gray row and below any previously saved data tables.
e automatically re-adjusted to make sure data is readable].
mory banks, so BE CAREFUL where you select before Uploading to the sheet.
ers are needed for Sat mem operations].
sted for Doppler and just change memory to follow the bird's Doppler.
radually listen lower and lower and transmit higher and higher.
n the receiver tuning, later.
omplete in this version] has Pop-Up Menus to allow easy setup for initially downloading into the radio.
nds to set Frequency,
rn so only the last appropriate thing is spoken.
data will be lost. Then QUIT Excel and restart it.
LT-Prnt Scrn; Paste into email or Word doc.
that is Yellow.
ldn't loose any data.
TNC routines in Sheet1) & 1 TNC Update Button & 1 routine in Sheet1
e executes, but that's ok)
nd Name repeat.
mand string columns, you can have revert to last uploaded..
Application.EnableSound = True
can't program CH 24 & 25.
routine for Step, Offset, Reverse, Tones, Skip, Group.
didn't work correctly
adio, for pasting into Control Sheet
the Control Sheet.
to SendACmd, SendACmd2 and Interrogate1 & 2.
d with vers 32.
rOn/Off sub. It is a synthesized function from the level.
) from David L. Salomon, KG4FJH, July 12 2007.
d Tx freq error.
plete situations.
ause operations are shown.
5 (Speech level -0 command+D254) Wait:Wait added. Hope it helps.
mal tuning operations.
Ain't None
Frequency KHz. Mode Filter Note Tune VFO A Read Radio
14195.000 USB Mid Read Radio won't exit without radio conne
145410.000 FM Mid Tune does not require a radio to be connected
7150.000 LSB Mid It only uses VFO A
29.000 Out of Range ? Vers 3.6bcu
30.000 LSB Mid /
60000.000 AM Mid /
61000.000 Out of Range ? /
142000.000 USB Mid /
151999.999 USB Mid Levels {
31.000 LSB Mid \ Tx Monitor *
420000.000 USB Mid \
Processor * {
449999.999 USB Mid \
QSOs TCTNC \
7178.000 LSB Mid 9600
EX47 TNC Baud
7180.000 LSB Mid
3705.660 LSB Mid RIT
RT * EXT Ant
3648.000 LSB Mid Updating sheet
5000.010 USB Mid Ideas
5000.000 AM Mid An RF Gain "Set to S-Meter level" function which is togg
5000.010 LSB Mid
15000.000 AM Mid
20000.000 AM Mid
AM Band North East Illinois
540 AM wide
560 AM wide WIND
580 AM wide
620 AM wide WTMJ Compound Stoc
670 AM wide WSER
720 AM wide WGN
780 AM wide WBBM
820 AM wide Catholic Madison Day
850 AM wide WCPT
890 AM wide WLS
1000 AM mid ESPN Radio
1030 AM wide
1050 AM wide WIP/B
1060 AM wide
1110 AM wide
1130 AM wide WISN Milwaukee
1160 AM mid
1200 AM wide
1230 AM wide
1360 AM wide
1380 AM wide
1400 AM wide
1550 AM wide
1600 AM wide WMCW
1620.000 AM mid
1950.000 AM Mid
2000.000 AM Mid
2200.000 AM Mid
Short wave Broadcast
Short Wave Stations Heard English unless noted.
3185.000 AM Wide
3220.000 AM Wide
5050.000 AM mid
5070.000 AM Mid HCJB Quito Ecuador (World Wide Christian Radio)
5810.000 AM Mid WEWN
5860.000 AM Wide
5935.000 AM Mid
5960.000 AM Mid
6854.800 AM Mid
7415.020 USB Wide WBCQ wbcq.com Off at 11:43 pm
7520.000 AM Wide
7780.000 AM Wide German
9575.000 AM Wide VOA
9820.010 LSB Wide Radio Havana Cuba
9830.000 LSB Wide German
3330.000 AM Narrow CHU Tune OffsetError
3329.007 AM Narrow 1.000 0.007
3331.007 LSB Narrow
12080.000 USB Mid VOA
13730.000 USB Mid Australia
2500.000 AM Mid WWV
5000.000 AM Mid WWV
10000.000 AM Mid WWV
15000.000 AM Mid WWV
20000.000 AM Mid WWV
7335.000 USB Mid CHU
3330.000 USB Mid CHU
3485.000 USB Mid
10051.000 USB Mid
1940.000 LSB Mid
1919 LSB Mid
1850.000 LSB Mid
1860 LSB Mid
Read Radio Filter Prefs Menu Update Set the port and Baudrate
dio won't exit without radio connected !
e a radio to be connected
Radio Menu & Settings
12
RG RF Gain
EX 12 Button Beep Level
1
EX 13 Sidetone Level - CW
0
EX 14 DRU Level
0
EX 15 Speech Level
1
Tx Monitor *
ML 0
ML * Monitor Level (PullDown Changing checkBox causes two commands See Radio_Functions.TxMonLvlSub
PLxx__ * Compressor Input Level Cut/Paset or drag causes
4
Processor * {
PL__xx * Compressor Output Level these to be sent.
5 all RF Gain S-Meter
2
EX 0 Display Brightness 1
EX 02 Main Dial Tuning Rate (500 / 1000)
Hi 3
850 31 * CW Pitch & IF offset
EX 5
EXT18
Ex Ant 1
AN * HF Antenna 7
A
Updating sheet MF Menu Select 9
* Radio Beeps for these. 20
40
60
Array filling has problems
It gets cleared between Prefs close
and click the Tune box.
(Appears to be an WinNT thing)
S-Meter level" function which is toggled on-off to a level setting.
www.kollamhamfest.com
et the port and Baudrate here --> Port= COM1 Baud= 57600 1060 com_port handle
Preference setting tables.
Pull-Dn SSB & FM CW CW AM
Index Upper Lower BW Offset Upper Lower
0 1400 0 50 400 2500 0
1 1600 50 80 450 3000 100
2 1800 100 100 500 4000 200
3 2000 200 150 550 5000 500
4 2200 300 200 600
5 2400 400 300 650 These are the pop-up menu lists
o_Functions.TxMonLvlSub() 6 2600 500 400 700
7 2800 600 500 750
RF Gain 8 3000 700 600 800
203-210 9 3400 800 1000 850
179-186 10 4000 900 2000 900
147-157 11 5000 1000 950
136-141 12 1000
111-126
84-88 Current Preference Values
62-63 Narrow 2600 500 200 850 2500 500
46 Mid 3000 300 1000 850 3000 200
Wide 5000 0 2000 850 5000 0
Default 850
Indices 6 6 0 3
SSB 8 4 1 2
AM 11 0 3 0
FM
0 Tx_Mon_Lvl_Pref 2 Bright_Pref
1 Beep_Lvl_Pref Hi TuneRate_Pref
0 Sidetone_Lvl_Pref 850 CWPitch_Pref
0 DRU_Lvl_Pref 1 RxAnt_Pref
1 Speech_Lvl_Pref
12 RF_Gain_Pref
4 Comp_In_Lvl_Pref
5 Comp_Out_Lvl_Pref A MenuSelect_Pref
com_port handle Call CloasComPort(1060)
setting tables.
FM RTTY On/Off TNC Baud Tune
Upper Lower BW Baud_List 57600 Lo
250 OFF 1200 38400 Hi
500 ON 9600 19200
1000 9600
1500 4800
These are the pop-up menu lists
ference Values
2600 400 250
3000 300 500
5000 0 1500
6 5
8 4
11 0
FALSE TNC_OnOff_Pref
9600 TNC_Baud_Pref
CW Pitch Menu
400 A
450 B
500
550
600
650
700
750
800
850
900
950
1000
1 2 3 4 5 6 7 8 9 10 11 12
Prototype memory sheet Read From Radio Tune Mem Write to radio
0 First Mem Select Row 0 First Mem
READING Radio 100 Last Mem Then 100 Last Mem
Takes ~ 5.2s Vers 3.6bcu T une Me m
U ploa d to She e t
0-59950 *
-2 7 char max Receive Step Transmit Tx Tx Offset R Subaudible
Mem Name Freq kHz. Mode KHz. Freq kHz. Mode Shift x50 kHz. Rev Type
0 WWV 2.5 2500.00 LSB 1.0kc … .0kc off
1 WWV 5 5000.00 AM 12.5kc … .0kc off
2 WWV 10 10000.00 AM 12.5kc … .0kc off
3 WWV 15 15000.00 AM 12.5kc … .0kc off
4 WWV 20 20000.00 AM 12.5kc … .0kc off
5 CHU 14 14670.00 USB 1.0kc … .0kc off
6 CHU 7 7335.00 USB 1.0kc … .0kc off
7 CHU 3 3330.00 USB 1.0kc … .0kc off
8 Volmet 3485.00 USB 1.0kc … .0kc off
9 Volmet 6604.00 USB 1.0kc … .0kc off
10 Volmet 10051.00 USB 1.0kc … .0kc off
11 Volmet 13270.00 USB 1.0kc … .0kc off
12 Antioc 145290.00 FM 10.0kc – 600.0kc T
13 N9HEP 145330.00 FM 10.0kc – 600.0kc T
14 KB9I v 145410.00 FM 10.0kc – 600.0kc T
15 Rokford 146610.00 FM 10.0kc – 600.0kc off
16 Crystlk 146655.00 FM 10.0kc – 600.0kc T
17 WAFAR 146670.00 FM 10.0kc – 600.0kc T
18 CFMC 146760.00 FM 10.0kc – 600.0kc T
19 WhtWtr 146820.00 FM 10.0kc – 600.0kc off
20 ESDA 146835.00 FM 10.0kc – 600.0kc T
21 SARA 146880.00 FM 10.0kc – 600.0kc T
22 APRS HF = .0kc
23
24
25 Test 7250.00 FM 5.0kc = .0kc T
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83 Copy 29675.00 FM 5.0kc – 100.0kc
84 all 7 53975.00 FM 5.0kc – 1700.0kc
85 Then 146940.00 FM 15.0kc – 600.0kc
86 just 223975.00 FM 5.0kc – 1600.0kc
87 repaste 448550.00 FM 25.0kc – 5000.0kc
88 to chec 919675.00 FM 25.0kc – 25000.0kc
89 Offsets 1260375.00 FM 25.0kc – 20000.0kc
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300 29.60 FM 6.25kc + .0kc DCS
6M
2M
70cm
13 14 15 16 17 # 19 20 21 22 23 TS-2000 26 27
15 Computer Delay PL PL Table
Entry Code # Tone #
126 18 1 67.0 1
Takes ~ 4.1s 21 2 71.9 2
D ownloa d to R a dio
Actual 18 3 74.4 3
Subaudible Scan 123.0 4 77.0 4
T# CT# DCS# Skip Group 5 79.7 5
67 67 23 0 Mode Abbreviations 6 82.5 6
67 67 23 0 a AM 7 85.4 7
67 67 23 0 c CW WB Step 8 88.5 8
67 67 23 0 w CW Entry Code 9 91.5 9
67 67 23 0 wr CWr 10 2 10 94.8 10
67 67 23 0 f FM 11 97.4 11
67 67 23 0 m FM Actual 12 100.0 12
67 67 23 0 k FSK 10 13 103.5 13
67 67 23 9 kr FSKr 14 107.2 14
67 67 23 0 l LSB 15 110.9 15
67 67 23 0 u USB NB Step 16 114.8 16
67 67 23 0 b USB Entry Code 17 118.8 17
107.2 107.2 23 0 others LSB 1 0 18 123.0 18
107.2 107.2 23 0 19 127.3 19
107.2 107.2 23 0 Code Mode Actual 20 131.8 20
67 67 23 0 1 LSB 1 21 136.5 21
107.2 107.2 23 0 2 USB 22 141.3 22
107.2 67 23 0 3 CW 23 146.2 23
107.2 107.2 23 0 4 FM 24 151.4 24
67 67 23 0 5 AM 25 156.7 25
91.5 91.5 23 0 6 FSK 26 162.2 26
107.2 67 23 0 7 CW-R 27 167.9 27
8 na 28 173.8 28
9 FSK-R 29 179.9 29
30 186.2 30
123 31 192.8 31
32 203.5 32
33 210.7 33
34 218.1 34
35 225.7 35
36 233.6 36
37 241.8 37
38 250.3 38
39 1750 39
79.7 88.5 74 0
28 29 TH-F6A & TS-2000 32 33 34 35 # 37 38 39 55
DCS DCS Table string Match Table WB Step Table
Entry Code # Tone # AM FM
23 000 000 23 000 1750 39 0 5.0kc 0
001 25 001 250.3 38 1 6.25kc 1
Actual 002 26 002 241.8 37 2 10.0kc 2
23 003 31 003 233.6 36 3 12.5kc 3
004 32 004 225.7 35 4 15.0kc 4 =
005 36 005 218.1 34 5 20.0kc 5 ####
006 43 006 210.7 33 6 25.0kc 6 ####
007 47 007 203.5 32 7 30.0kc 7 ####
008 51 008 192.8 31 8 50.0kc 8 ####
009 53 009 186.2 30 9 100.0kc 9 ####
010 54 010 179.9 29 ####
011 65 011 173.8 28 ####
012 71 012 167.9 27 NB Step Table
013 72 013 162.2 26 SSB CW FSK
014 73 014 156.7 25 0 1.0kc 0
015 74 015 151.4 24 1 2.5kc 1
016 114 016 146.2 23 2 5.0kc 2
017 115 017 141.3 22 3 10.0kc 3
018 116 018 136.5 21
019 122 019 131.8 20
020 125 020 127.3 19
021 131 021 123.0 18 Mode Table
022 132 022 118.8 17 M
Code ode Code
023 134 023 114.8 16 1 LSB 1
024 143 024 110.9 15 2 USB 2
025 145 025 107.2 14 3 CW 3
026 152 026 103.5 13 4 FM 4
027 155 027 100.0 12 5 AM 5
028 156 028 97.4 11 6 FSK 6
029 162 029 94.8 10 7 CW-R 7
030 165 030 91.5 9 8 na 8
031 172 031 88.5 8 9 FSK-R 9
032 174 032 85.4 7
033 205 033 82.5 6
034 212 034 79.7 5
035 223 035 77.0 4
036 225 036 74.4 3
037 226 037 71.9 2
038 243 038 67.0 1
039 244 039
040 245 040
041 246 041
042 251 042
043 252 043
044 255 044
045 261 045
046 263 046
047 265 047
048 266 048
049 271 049
050 274 050
051 306 051
052 311 052
053 315 053
054 325 054
055 331 055
056 332 056
057 343 057
058 346 058
059 351 059
060 356 060
061 364 061
062 365 062
063 371 063
064 411 064
065 412 065 ####
066 413 066 ####
067 423 067 ####
068 431 068 ####
069 432 069 ####
070 445 070 ####
071 446 071 ####
072 452 072 ####
073 454 073 ####
074 455 074 ####
075 462 075 ####
076 464 076
077 465 077
078 466 078
079 503 079
080 506 080
081 516 081
082 523 082
083 526 083
084 532 084
085 546 085
086 565 086
087 606 087
088 612 088
089 624 089
090 627 090
091 631 091
092 632 092
093 654 093
094 662 094
095 664 095
096 703 096
097 712 097
098 723 098
099 731 099
100 732 100
101 734 101
102 743 102
103 754 103
56
Takes ~5.5 sec @ 57600 baud
MW00000000000000000000000000000000000000;
MW00000000000000000000000000000000000000;
Takes ~ 25 sec @ 9600 baud
Rx
?;
123456789_123456789T123456789_123456789_121345678
57
This is a development area ONLY
Tx
?;
123456789_123456789T123456789_123456789_121345678
Read From Radio 58
Refresh Sheet
Upload From Radio
Form Commands Rx
MW0
Write to Radio
59
Tx
MW1
Satellite Memory Management Sheet TNC Sub MessageReadError
Select a blank area first. Click in a data table first. 9600 Leave UN-Checked
Not Tested Yet ->
U ploa d From R a dio D ownloa d to R a dio T one ca pa ble
T one ca pa ble
Use this area for Satellite memory set up. Set it up then Download to radio.
Downlink (Rx) Uplink (Tx) Uplink CTRL Trace
MEM Name VFO A Mode VFO B Mode Main/Sub main/sub On/Off
1
Vers Sub Sub On
Frequency Frequency
0 3.6bcu Main Main Off
0 Oscar 52 145.900 LSB
1.000 435.250 USB 2 Sub 1 Main 0 On 1
1 ARISS 145.800 USB
2.000 437.800 LSB 1 Sub 1 Main 0 On 1
2 Oscar 29 435.850 USB
2.000 145.950 LSB 1 Sub 1 Main 0 Off 0
3 29bcnAOS 435.803 CW
3.000 1296.000 n/ a 8 Sub 1 Main 0 Off 0
4 Oscar 27 436.795 FM
4.000 145.850 FM 4 Sub 1 Main 0 Off 0
5 Oscar 51 435.150 FM
4.000 145.880 FM 4 Sub 1 Main 0 Off 0
6 Oscar 51 435.300 FM
4.000 145.920 FM 4 Sub 1 Main 0 Off 0
7 Oscar 51 435.300 FM
4.000 1268.700 FM 4 Sub 1 Main 0 Off 0
8 Oscar 50 436.795 FM
4.000 145.850 FM 4 Sub 1 Main 0 Off 0
Quick 9 Os55 BCN 436.8375 CW 1296.000
3.000 8 n/ a
1 Sub
0 Off 0 Main
Select a cell below this row then click the above button to Upload Satellite memories from the radio.
Just some things for testing...
Mem Text Down Link Up Link Up Link CTRL Trace
Num Name Freq Mode Freq Mode Side Side On
0 Sat 0 51.001 4 1296.001 4 1 0 0
1 Sat 1 50.111 4 1296.111 4 1 0 0
2 Sat 2 50.222 4 1296.222 4 1 0 0
3 Sat 3 50.333 4 1296.333 4 1 0 0
4 Sat 4 50.444 4 1296.444 4 1 0 0
5 Sat 5 50.555 4 1296.555 4 1 0 0
6 Sat 6 50.665 4 1296.665 4 1 0 0
7 Sat 7 50.777 4 1296.777 4 1 0 0
8 Sat 8 50.888 4 1296.888 4 1 0 0
9 Sat 9 50.999 4 1296.999 4 1 0 0
Test #1 for Same-Band test.
Mem Text Down Link Up Link Up Link CTRL Trace
Num Name Freq Mode Freq Mode Side Side On
0 Sat A 51.001 4 145.900 4 1 0 0
1 Sat B 145.900 4 435.250 4 1 0 0
2 Sat C 440.222 4 1296.222 4 1 0 0
3 Sat D 50.333 4 1296.333 4 1 0 0
4 Sat E 145.444 4 1296.444 4 1 0 0
5 Sat 5 445.555 4 1296.555 4 1 0 0
6 Sat 6 145.666 4 1296.665 4 1 0 0
7 Sat 7 50.777 4 1296.777 4 1 0 0
8 Sat 8 50.888 4 1296.888 4 1 0 0
9 Sat 9 50.999 4 1296.999 4 1 0 0
Enter a name for this group of Satellite memories.
Mem Text Down Link Up Link Up Link CTRL Trace
Num Name Freq Mode Freq Mode Side Side On
0 Oscar 52 145.9 1 435.25 2 1 0 0
1 ARISS 145.8 2 437.8 1 1 0 1
2 Oscar 29 435.85 2 145.95 1 1 0 0
3 29bcnAOS 435.803 3 1296 1 1 0 0
4 Oscar 27 436.795 4 145.85 4 1 0 0
5 Oscar 51 435.15 4 145.88 4 1 0 0
6 Oscar 51 435.3 4 145.92 4 1 0 0
7 Oscar 51 435.3 4 1268.7 4 1 0 0
8 Oscar 50 436.795 4 145.85 4 1 0 0
9 Os55 BCN 436.8375 3 1296 4 1 0 0
Select here to SAVE another group of Sat. memories FROM radio
Enter a name for this group of Satellite memories.
Mem Text Down Link Up Link Up Link CTRL Trace
Num Name Freq Mode Freq Mode Side Side On
0 Oscar 52 145.9 1 435.25 2 1 0 0
1 ARISS 145.8 2 437.8 1 1 0 1
2 Oscar 29 435.85 2 145.95 1 1 0 0
3 29bcnAOS 435.803 3 1296 1 1 0 0
4 Oscar 27 436.795 4 145.85 4 1 0 0
5 Oscar 51 435.15 4 145.88 4 1 0 0
6 Oscar 51 435.3 4 145.92 4 1 0 0
7 Oscar 51 435.3 4 1268.7 4 1 0 0
8 Oscar 50 436.795 4 145.85 4 1 0 0
9 Os55 BCN 436.8375 3 1296 4 1 0 0
Select here to SAVE another group of Sat. memories FROM radio
Sub MessageReadError .ColorIndex = 0 causes an error
Leave UN-Checked Upload takes ~ 3.5 sec @ 57600 Baud
ested Yet -> Download takes ~ 2.5 sec @ 57600 Baud
T one ca pa ble Firmwa re
T one ca pa ble Firmwa re
Linked Cell Area for Memory Setup section.
Trace MULT/CH Subaudable Downlink Uplink Uplink CTRL
Sum/Diff Tune/MEM Type Code Mode Mode Main/Sub main/sub
Rev/Norm T xx
Rev-Sum Mem # CT xx Sub Sub
Nor-Diff VFO DCS xxx Main Main
Sum 0 Off 0 LSB USB Sub Main
Diff 1 Off 0 USB LSB Sub Main
Sum 0 This Off 0 USB LSB Sub Main
Sum 0 byte Off 0 CW n/a Sub Main
Sum 0 not Off 0 FM FM Sub Main
Sum 0 needed Off 0 FM FM Sub Main
Sum 0 T 1 67 FM FM Sub Main
Sum 0 Not loaded T 1 67 FM FM Sub Main
Sum 0 or read T 1 67 FM FM Sub Main
Sum 0 Off 0 CW n/a Sub Main
from the radio.
Trace Subaudable
Sense Type Freq
0 Code Mode
0 1 LSB
0 2 USB
0 3 CW
0 4 FM
0 5 AM
0 6 FSK
0 7 CW-R
0 8
0 9 FSK-R
Trace Subaudable
Sense Type Freq
0
0
0
0
0
0
0
0
0
0
Trace Subaudable
Sense Type Freq
0
1
0
0
0
0
0
0
0
0
Trace Subaudable
Sense Type Freq
0
1
0
0
0
0
0
0
0
0
for Memory Setup section.
Trace Trace
On/Off Sum/Diff
T
On Rev CT
Off Non DCS Drop down menu area Not
Uplink Used
On Sum Off Mode CTRL Trace Trace Mult/CH ToneType
On Diff Off Main Off Sum Tune Off 0
Off Sum Off LSB Sub On Diff Mem # T 1
Off Sum Off USB CT 2
Off Sum Off CW DCS 3
Off Sum Off FM 4
Off Sum T AM 5
Off Sum T FSK 6
Off Sum T CW-R 7
Off Sum Off n/a 8
FSK-R 9
Vers 3.6bcu
Extended Command Queries
0 1 2 3 4 5 6 7 8
Bright EX0000000 OFF 1 2 3 4
Key Illum EX0010000 OFF ON
Tune Rate EX0020000 500 1000 Per revolution
Mult-CH Tune EX0030000 OFF ON
M-CH Rounds EX0040000 OFF ON
9 kHz AM EX0050000 OFF ON
Mem-SPLIT EX0060100 OFF ON
Mem Tune EX0060200 OFF ON
Part Slow EX0070000 OFF ON
Scan Slow Range EX0080000 100 200 300 400 500
Scan Hold EX0090000 OFF ON
Scan Resume EX0100000 CO TO
Visual Range EX0110000 31 61 91 181
Beep Level EX0120000 OFF 1 2 3 4 5 6 7 8
Sidetone Level EX0130000 OFF 1 2 3 4 5 6 7 8
DRU Level EX0140000 OFF 1 2 3 4 5 6 7 8
Voice Level EX0150000 OFF 1 2 3 4 5 6 7 8
Spkr Config EX0160000 OFF 0 1 2
Spkr Rev EX0170000 OFF ON
Aux Ant EX0180000 OFF ON
S-Meter squelsh EX0190100 OFF ON
S-Squelch Hang EX0190200 OFF 125 250 500
Rx Equalizer EX0200000 OFF H F B C U
Tx Equalizer EX0210000 OFF H F B C U
Tx Bw EX0220000 2.0 2.2 2.4 2.6 2.8 3.0
Fine Power EX0230000 OFF ON
Time-Out time EX0240000 OFF 3 5 10 20 30
Transverter EX0250000 OFF ON
Tx Hold Tuner EX0260000 OFF ON
Rx tuner on EX0270000 OFF ON
Linear HF EX0280100 OFF 1 2
Linear 6M EX0280200 OFF 1 2
Linear 2M EX0280300 OFF 1 2
Linear 440 EX0280400 OFF 1 2
Linear 1.2 EX0280500 OFF 1 2
Playback repeat EX0290100 OFF ON
Playback EX0290200 1 2 3 4 5 6 7 8 9
Key Priority EX0300000 OFF ON
CW Pitch EX0310000 400 450 500 550 600 650 700 750 800
CW Rise time EX0320000 1 2 4 6
CW Ratio EX0330000 auto 2.5 2.6 2.7 2.8 2.9 3 3.1 3.2
CW rev ratio EX0340000 OFF ON
CW Bug EX0350000 OFF ON
CW in SSB EX0360000 OFF ON
CW SSB shift EX0370000 OFF ON
FSK Shift EX0380000 170 200 425 850
FSK polarity EX0390000 N Rev
FSK Freq EX0400000 1275 2125
Mic Gain FM EX0410000 Low Mid Hi
Tone Mode EX0420000 Burst Cont
Auto Offset EX0430000 OFF ON
Hold 1750 EX0440000 OFF ON
DTMF Mem EX0450100 OFF ON
DTMF Speed EX0450200 Slow Fast
DTMF Pause EX0450300 100 250
Mic Control EX0450400 OFF ON
TNC Rx EX0460000 Main Sub
TNC Speed EX0470000 1200 9600
DCD Rx EX0480000 TNC M/S
Cluster tune EX0490100 Auto Man
Cluster conf tone EX0490200 OFF Morse Voice
Packet Filter EX0500100 OFF ON
Packet in Level EX0500200 0 1
Packet out lvl Main EX0500300 0 1
Packet out lvl Sub EX0500400 0 1
TNC Ext Rx EX0500500 Main Sub
TNC Ext Speed EX0500600 1200 9600
Front Panel PF keyEX0510100 00-99 Menu Number
PF1 EX0510200 00-99 Menu Number
PF2 EX0510300 00-99 Menu Number
PF3 EX0510400 00-99 Menu Number
PF4 EX0510500 00-99 Menu Number
Slave Transfer EX0520000 OFF ON
Split Transfer EX0530000 OFF ON
Tx Inhibit EX0540000 OFF ON
TNC ON EX0550000 n/a ON
COM Port Speed EX0560000 4800 9600 19200 38400 57600
Auto Power off EX0570000 OFF ON
RC-2000 Font EX0580000 OFF ON
RC-2000 Contrast EX0590000 OFF ON
RC-2000 Mode EX0600000 Neg Pos
Repeater Mode EX0610100 OFF Lock Cross
Repeater Tx Hold EX0610200 OFF ON
Remote ID EX0610300 000-999
Remote ACK EX0610400 OFF ON
Remote EX0610500 OFF ON
Commander Call EX0620100
Transporter Call EX0620200
Sky Cmd Tone EX0620300 See PL Toned
Sky Cmd Speed EX0620400 1200 9600
Sky Cmd Mode EX0620500 OFF Client Cmd T-Port
9
9
9
9
9
10 ~60
850 900 950 1000
3.3 3.4 3.5 ~4
