Innovation in Appliances Use and Care Instructions
WARNING: This is an electrical appliance. To reduce the risk of
fire, electrical shock, or injury, basic safety precautions should always
be followed, including the following: Visit www.sensor-temp.com
1 Do not immerse the Universal Electronic Base,
plug or lead in water or other liquid, or place
switched on. Always place the Kettle on the
Shark Cordless Super Sweeper EP2110 EP2110S EP2110B
on a wet surface, or use in a damp room (such
as a bathroom) or outdoors. 9 The base and kettle body will be hot. Lift the
kettle only by the handle. Do not touch the
Double-Action Brush Rollers clean up those little mishaps 50% faster
and with half the effort. The Shark Cordless Rechargeable Super Sweeper
Plastic Polished Brushed
Stainless Steel Stainless Steel Kettle
2 Do not place the Kettle, base or cord on or base unless the Kettle is in position. spins the brushes in opposite directions creating a double pass in one
near any hot surface such as hot plate, burner clean sweep. Great for tight corners, against the wall & under almost
or hob. 10 Take care when opening the Lid. There may anything. It’ll pick up virtually anything too. With up to 45 minutes use
be considerable steam. Using the Lid Release per charge, it’s the ultimate cleaner.
3 Never operate any electrical appliance with Button will keep your fingers away from the
a damaged plug or cord or if the unit steam.
malfunctions, is dropped in water, or is
damaged in any way. 11 Take care when pouring. Do not over-tilt the
Kettle and pour slowly.
4 If damaged in any way, return the Kettle, Shark Cordless Handvac
Universal Electronic Base and cord to 12 Make sure the lid is closed before placing on
Specialised Sales & Marketing Ltd for the Universal Electronic Base. So much power in such a small body. Sleek, swift and ruthlessly efficient,
examination, repair or adjustment. 13 Ensure that the Kettle contains sufficient water the Shark Cordless Handvac is perfect for your caravan, boat, holiday
before placing on the base. Water level must home or around the house. The horizontal motorised head cleans up all
5 The Sensor-Temp Kettle is designed to those annoying little messes. Even hard-to-shift pet hair just disappears.
continuously heat water to a desired never be allowed to drop below the 'minimum'
mark. And what’s more, it’ll make short work of big jobs too.
temperature. Any hot water is dangerous, so
keep the Kettle and Universal Electronic Base 14 Do not overfill the Kettle. Make sure the water
away from the edge of worktops and out of level does not go above the 'maximum' mark.
the reach of children.
15 Remove the Kettle from the base before filling Big Shark Steam Duck
6 Never allow the power cord to hang over the or pouring.
edge of a work top or table. Make sure the A mean green steam machine, the Big Shark Steam Duck makes cleaning
cord is wound into the base to keep it as tidy 16 Use the Kettle only with the supplied Universal easy and chemical-free. Just add water! This powerful, lightweight,
and safe as possible. Electronic Base – and vice versa. hand-held steam cleaner is perfect for degreasing, disinfecting, stain
removal, neutralisation of dust mites and allergens. Great for general
7 Supervision is required when electrical 17 DO NOT set the Universal Electronic Base to cleaning around the home – just add water, wait 30 seconds and you’re
appliances are used around children or people Boiling and Hold for an extended period, in action!
with infirmities. – do not leave unattended. otherwise the Kettle will eventually boil dry.
8 Never leave the Universal Electronic Base 18 Do not use the Kettle for any purpose other
uncovered for long periods with the power than heating water.
Shark Entertainment Fridge
Read all instructions before using your Sensor-Temp Kettle Sleek, stylish and very cool, the Shark Entertainment Fridge is the ultimate
entertainment accessory. All year round. With its huge capacity the Shark
Entertainment Fridge can hold over 150 x 355ml or over 120 x 375ml
cans, or with its baskets, conveniently stack any combination of cans,
Before Use bottles and food. The perfect companion for your BBQ.
1 Ensure you remove all packaging from all components.
2 Position the Power Base as close to a wall socket as For information or assistance:
possible and shorten the cord by winding it into the
cavity beneath the Power Base.
Shark Intelligent Electronic Iron SPECIALISED SALES & MARKETING LTD
3 Before the first use – and after prolonged storage – fill
the Kettle to the 'maximum' mark. To fill, push the Lid At last – an iron that thinks! The Shark Intelligent Electronic Iron tells Australia 41-51 Monash Drive, Lyndhurst, 3975 Victoria
Release Button to open the lid and hold the Kettle under you when the temperature is right for your fabric. It will even shut itself
a tap (picture, left). off from any position (sideways or flat within 7-9 seconds, or upright
Freephone 1800 750 045
4 Place the Kettle on the base, push the Power Button after 7 minutes). Add the X-TendedTM Steam Burst for the most powerful New Zealand 21 Jipcho Road, Sockburn, PO Box 10-312 Christchurch
steam function on the market . . . now that’s really smart!
on, bring to boil by simply pressing the Variable Electronic Freephone 0800 963 963
Temperature Control – you will see marching lights trace
the letter ‘S’ shape. After a couple of minutes, discard For more information on this and other great Shark products, visit www.sensor-temp.com
the boiling water and rinse out with fresh cold water.
Operating the Shark Sensor-Temp Kettle Controlling the Water Temperature TWO (2) YEAR LIMITED WARRANTY
1 Make sure the Kettle has sufficient water, but 5 The Kettle will automatically switch off when Boiling water is too hot for many of the beverages Recommended temperatures are:
do not overfill. Place it on the base. the selected temperature is reached. we drink today – it can burn coffee beans and tea 35º to 40º – Reheating previously boiled water to
leaves, damaging the flavour. The Shark Sensor- mix with powdered baby formula.
2 Plug the cord into the mains supply. 6 If you wish to maintain the water at the selected Temp Kettle can control the water temperature to
temperature, push the ‘Hold’ Button on. make a perfect beverage, allowing you to enjoy 60º to 80º – Green tea/herbal tea, depending on
3 On the Universal Electronic Base, push the 7 You will notice that when the Kettle is removed the flavour as it should be. type and flavour preference.
Power Button on. from the Universal Electronic Base, the LED 85º – Instant coffee/plunger coffee
(For a short cut to boiling water, simply press the
4 Turn the Electronic Variable Temperature
Temperature Display shows an 'EE' message. Variable Electronic Temperature Control.) 95º – Black tea. Models EP2110, EP2110S, EP2110B
This is normal.
Control to select the desired temperature (seen SHARK warrants this product to be free from defects in material and workmanship for a period of two
in the LED Temperature Display). Refer to the 8 Always replace the Kettle on the Universal
Electronic Base. Never leave the base (2) years from the date of the original purchase, when utilized for normal household use, subject to
temperature guide on the Universal Electronic The Water Filter the following conditions, exclusions and exceptions.
Base. When boiling water, simply press the uncovered.
Electronic Variable Temperature Control – 9 DO NOT set the Universal Electronic Base to If your appliance fails to operate properly while in use under normal household conditions within the
you see marching lights trace the letter ‘S’ Boiling and Hold for an extended period, Depending on the hardness of your water supply, warranty period, return the complete appliance and accessories to your Shark local Electrical Retailer.
PUSH LID FORWARD If the appliance is found by SHARK to be defective in material or workmanship, SHARK will, AT ITS
shape. otherwise the Kettle will eventually boil dry. scale particles may be present that give the water
a cloudy or greasy appearance. The Water Filter OWN DISCRETION, repair or replace it free of charge. Proof of purchase date must be included. Where
is designed to trap these scale particles and prevent a replacement product is supplied, this shall be guaranteed for the balance of the original warranty
Lid Release Button them from passing into your drink. period. Repairs outside the warranty period will be at your cost.
The Water Filter should be cleaned on a regular Non-durable parts or parts which normally require replacement are specifically excluded from the
basis. To do this, follow these steps: warranty.
Lid Lug 1 Make sure that the Kettle is empty or contains The liability of SHARK is limited solely to the cost of the repair or replacement of the unit at our option.
only cold water. This warranty does not cover normal wear of parts and does not apply to any unit that has been
tampered with or used for commercial purposes. This limited warranty does not cover damage caused
2 Press the Lid Release Button to open the lid. by misuse, abuse, negligent handling or damage due to faulty packaging or mishandling in transit.
3 Pull the Lid towards the front and lift upwards This warranty does not cover damage or defects caused by or resulting from damages from shipping
to remove it completely. or repairs, services or alternations to the product or any of its parts, which have been performed by
a repair person not authorised by SHARK.
4 Hold the Lid in one hand and squeeze the This warranty is extended to the original purchaser of the unit and excludes all other legal and/or
sides of the Water Filter with the other. conventional warranties. The responsibility of SHARK, if any, is limited to the specific obligations
Side Lug expressly assumed by it under the terms of the limited warranty. In no event is SHARK liable for
5 Rinse the Water Filter under a tap while
Handle brushing with a soft bristle brush. incidental or consequential damages of any nature whatsoever. Some states do not permit the exclusion
or limitation of incidental or consequential damages, so the above may not apply to you.
6 Rinse the Kettle with fresh water. This warranty gives you specific legal rights, and you may also have other rights which vary from state
7 Replace the Water Filter onto the to state.
Lid, making sure it connects with Consumers are advised that the manufacturer does not undertake that repair facilities and
the back support and that the spare parts will be available for this product.
two side lugs fit in the holes.
If any of the provisions of the foregoing are contrary to any relevant legislation then that provision shall
8 Replace the Lid, making sure that be deemed to be excluded from the guarantee and the balance of the provisions will continue to apply.
the slots click into place. We are constantly striving to improve our products, therefore the specifications contained herein are
RINSE UNDER TAP subject to change without notice.
Care & Cleaning IMPORTANT: PLEASE RETAIN THIS GUARANTEE CARD
Regular cleaning will prevent scale build-up and 1 Empty the Kettle when not in use, especially
discolouration. Follow the instructions for the Water overnight. NAME:
Cord Tidy (under base) Filter above. Wipe the Ketlle with a damp cloth – 2 Use filtered water in preference to ordinary tap
inside and out. A little household detergent may water. ADDRESS:
be necessary, but be sure to rinse thoroughly
afterwards. 3 Descale the Kettle regularly. Use a proprietary
Universal brand of descaler that is suitable for plastic
Electronic products (Model EP2110). Follow the
Avoiding Scale Buildup instructions on the packet. PURCHASED FROM:
Scale buildup can cause the element to overheat 4 After descaling, rinse out the Kettle several SUBURB:
and the thermostat to cut out prematurely. Any times. Fill with fresh water, heat to maximum,
failure directly attributable to scale buildup will not then empty. This should remove any chemical NAME OF PRODUCT:
‘Hold’ Button Power Button Variable Electronic be covered by the warranty. Fortunately, scale residue.
Temperature Control buildup can be easily minimised by following these • In areas of hard water, descaling may be DATE OF PURCHASE: MODEL No:
Display steps: necessary as often as once a month.