TRIUMPH ROCKET III SOLO RACK
INSTALLATION INSTRUCTIONS
#TR3010
1. Using the ignition key remove the driver’s seat. Remove the three bolts which secure the
passenger seat to the rear fender and remove the passenger seat.
2. Place the lock washers and washers onto the three 6 x 25mm bolts (supplied). Place the
solo rack onto the rear fender and align the bolt holes in the fender with the holes in the
solo rack. Starting with the two lower holes, place the black plastic spacers (two
supplied) between the fender and the solo rack. Next insert two of the bolts with the
washers thru the rack and spacers then thread into the fender several turns. At the upper
hole place the rubber washer (supplied) between the solo rack and the fender. Insert the
remaining bolt with washers thru the solo rack, rubber washer and thread into the fender.
Tighten all three bolts securely.
3. Reinstall driver’s seat.
CAUTION: DO NOT EXCEED 12 POUNDS OF WEIGHT ON THE SOLO RACK!
RIVCO Products Inc.
440 South Pine Street
Burlington, WI53105
262-763-8222 www.rivcoproducts.com