SOLARIS INSTALLATION STEPS Login to the server console by using hyperterminal / Tera Term. Below are the Screenshots of the All the steps which Come During Installation. 1)
2) Select 0 for English.
3) Select the type of terminal ,3 for DEC VT100.
4) Press Esc + 2 to Continue.
5) Select Network Interface bge0. And Press Esc + 2 to Continue.
6) Select Subnet for bge0 by Selecting Yes & Press Esc + 2 to continue.
7) Enter Net mask 255.255.255.0 for bge0 & Press Esc + 2 to continue.
8) Select No to Disable IPv6 & Press Esc + 2 to continue.
9) Set the Default Root for Bge0 by Choosing specify One Option & Press Esc + 2 to continue.
10) Enter the Router IP Address for bge0 & Press Esc + 2 to continue.
11) Confirmation Screen will pop up for the Information Entered & Press Esc + 2 to continue.
12) Specify No to Use Standard UNIX Security & Press Esc + 2 to continue.
13) Press Esc + 2 to continue.
14) Name Service is not Used so select None & Press Esc + 2 to continue.
15) Press Esc + 2 to continue.
16) Select Time Zone & Press Esc + 2 to continue.
17) Select Country & Press Esc + 2 to continue.
18) Enter Date & Time & Press Esc + 2 to continue.
19) Press Esc + 2 to continue.
20) Enter Root Password & Press Esc + 2 to continue.
21) Press Esc + 2 to continue.
22) Select Yes to Enable Remote Services & Press Esc + 2 to continue.
23)
24) Press Esc + 2 to continue with Standard Installation.
25) Select Automatically eject CD/DVD & Press Esc + 2 to continue.
26) Press Esc + 4 to continue with Initial Option.
27) Press Esc + 2 to Accept License & Continue.
28) Select Required Geographic Regions & Press Esc + 2 to continue.
29) Select System Locale POSIX C (C) Press Esc + 2 to continue.
30) Select Sun Validation Test Suite & Press Esc + 2 to continue.
31) Select the Solaris Software to Install on the system which is Entire Distribution plus OEM support & Press Esc + 2 to continue.
32) Select Disk Device for installing solaris which is clt0d0 & Press Esc + 2 to continue.
33) Select the Boot Disk for Installing Root (/) file system of Solaris which is clt0d0 & Press Esc + 2 to continue
34) To Reconfigure EEPROM Press Esc + 2 to continue.
35) Press Esc + 2 to continue.
36) Press Esc + 2 to continue.
37) Press Esc + 2 to continue.
38) Enter the size of Mount Points & Press Esc + 2 to continue.
39) Press Esc + 2 to continue.
40) Press Esc + 2 to continue.
41) Press Esc + 2 to continue.
42) Press Press Esc + 2 to continue.
43) Press Press Esc + 2 to continue.
44)
45)
46)
47) Press Y to Override the System’s Default NFS Version 4 domain Name.
48)
49) After the above steps completed successfully you will be able to see the # Shell.