1. CONTRACT ID CODE P AGE OF P AGES
AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT
2. AMENDMENT/MODIFICATION NO. 3. EFFECTIVE DATE 4. REQUISITION/P URCHASE REQ. NO. 5. P ROJECT NO.(If applicable)
0003 SEE SCHEDULE
6. ISSUED BY CODE N61331 7. ADMINISTERED BY (If other than item 6) CODE
NSWC PANAMA CITY (M. KOPP)
MATTHEW.KOPP@NAVY.MIL See Item 6
110 VERNON AVENUE
PANAMA CITY FL 32407-7001
8. NAME AND ADDRESS OF CONT RACT OR (No., Street, County, State and Zip Code) X 9A. AMENDMENT OF SOLICIT AT ION NO.
X 9B. DAT ED (SEE IT EM 11)
10A. MOD. OF CONT RACT /ORDER NO.
10B. DAT ED (SEE IT EM 13)
CODE FACILIT Y CODE
11. T HIS IT EM ONLY APPLIES T O AMENDMENT S OF SOLICIT AT IONS
X The above numbered solicitation is amended as set forth in Item 14. The hour and date specified for receipt of Offer is extended, X is not extended.
Offer must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation or as amended by one of the following methods:
(a) By completing Items 8 and 15, and returning 1 copies of the amendment; (b) By acknowledging receipt of this amendment on each copy of the offer submitted;
or (c) By separate letter or telegram which includes a reference to the solicitation and amendment numbers. FAILURE OF YOUR ACKNOWLEDGMENT TO BE
RECEIVED AT THE P LACE DESIGNATED FOR THE RECEIP T OF OFFERS P RIOR TO THE HOUR AND DATE SP ECIFIED MAY RESULT IN
REJECTION OF YOUR OFFER. If by virtue of this amendment you desire to change an offer already submitted, such change may be made by telegram or letter,
provided each telegram or letter makes reference to the solicitation and this amendment, and is received prior to the opening hour and date specified.
12. ACCOUNT ING AND APPROPRIAT ION DAT A (If required)
13. T HIS IT EM APPLIES ONLY T O MODIFICAT IONS OF CONT RACT S/ORDERS.
IT MODIFIES T HE CONT RACT /ORDER NO. AS DESCRIBED IN IT EM 14.
A. T HIS CHANGE ORDER IS ISSUED PURSUANT T O: (Specify authority) T HE CHANGES SET FORT H IN IT EM 14 ARE MADE IN T HE
CONT RACT ORDER NO. IN IT EM 10A.
B. T HE ABOVE NUMBERED CONT RACT /ORDER IS MODIFIED T O REFLECT T HE ADMINIST RAT IVE CHANGES (such as changes in paying
office, appropriation date, etc.) SET FORT H IN IT EM 14, PURSUANT T O T HE AUT HORIT Y OF FAR 43.103(B).
C. T HIS SUPPLEMENT AL AGREEMENT IS ENT ERED INT O PURSUANT T O AUT HORIT Y OF:
D. OT HER (Specify type of modification and authority)
E. IMPORT ANT : Contractor is not, is required to sign this document and return copies to the issuing office.
14. DESCRIPT ION OF AMENDMENT /MODIFICAT ION (Organized by UCF section headings, including solicitation/contract subject matter
The purpose of this amendment is to add Question 4 to Section J.
All offerors must acknow ledge this amendment.
Except as provided herein, all terms and conditions of the document referenced in Item 9A or 10A, as heretofore changed, remains unchanged and in full force and effect.
15A. NAME AND T IT LE OF SIGNER (T ype or print) 16A. NAME AND T IT LE OF CONT RACT ING OFFICER (T ype or print)
MARY F. HINES / CONTRACTING OFFICER
TEL: 850-235-5389 EMAIL: email@example.com
15B. CONT RACT OR/OFFEROR 15C. DAT E SIGNED 16B. UNIT ED ST AT ES OF AMERICA 16C. DAT E SIGNED
(Signature of person authorized to sign) (Signature of Contracting Officer)
EXCEPT ION T O SF 30 30-105-04 ST ANDARD FORM 30 (Rev. 10-83)
APPROVED BY OIRM 11-84 Prescribed by GSA
FAR (48 CFR) 53.243
Page 2 of 2
SECTION SF 30 BLOCK 14 CONTINUATION PAGE
SUMMARY OF CHANGES
SECTION J - LIST OF DOCUMENTS, EXHIBITS AND OTHER ATTACHMENTS
The following have been modified:
Question 1. “I cannot seem to locate DWG 631-6800343 for the paint requirement, could you please provide the
Answer 1. Drawing 6800343 will be sent by email as an encrypted file to provide the paint specifications.
Question 2. “On drawing #7646757 C there is a piece of bar stock at the top that says it is 0.400 this is not a stock
size. Should it be .375?”
Answer 2. This item is not being requested as bar stock according to the drawing. The item in question is Item No. 3
(Vertical Plate). There is a note in the drawing stating that this item is fabricated from Item No. 6 (Plate, AL SH - 48
X 96 X .125 THK).
Question 3. Adapter plate drawing #7646757, General note #7 references paint in accordance with DWG 631-
6800343 Area 7. On drawing #631-6800343, sheet 6, area 7 shows "Paint Areas", as Not Used. Are these adapters
to be painted?
Answer 3. The painting requirement is for a powder coating on the adapter plates. Use FED-STD-595 color 37038
(RGB hex code 051111) which is a flat black.
Question 4. On drawing 7646757, sheet 1 there is a question on three of the notes. Note 7 calls out that it is to be
painted in accordance with dwg. 631-6800343 area 7, we did not receive the drawing or does it not get painted at
this time? Note 8 calls out Install Rivets per 7614-947913 and we do not have this spec. Note 9 calls out Fabrication,
Welding, and Inspection shall be per NAVSEA 0900-LP-060-4010 and we do not have this either.
Answer 4. Revise Note 7 to read "Paint using powder coat process with FED-STD-595 color 37038 (RGB hex code
051111), flat black. Revise Note 8 to read "Install rivets in accordance with rivet manufacturer's instructions."
Revise Note 9 to read "Fabrication welding and inspection shall be per ANSI/AWS B2.1/B2.1M:2009 Specification
for Welding Procedure and Performance Qualification."
(End of Summary of Changes)