Docstoc

QUICK RING

Document Sample
QUICK RING Powered By Docstoc
					                                           Plumbing Specialties




 QUICK RING
Replaces ANY Closet Ring!

                   United States Patent 5,890,239
                   Unique screw tabs attach to wood or concrete.
                   Plastisol coat provides corrosion protection.
                   Slotted for 1/4” or 5/16” closet bolt.
                   Old closet ring does not need to be present.
                   Replaces any and all closet rings.




    INSTALLATION INSTRUCTIONS

         FOR SOLVENT WELDED STEEL/PLASTIC
         COMBO AND PLASTIC CLOSET RINGS
         Remove portion of broken ring, if remaining portion cannot be re-
         moved, Quick Ring will mount on top.
         Apply a bead of butyl rubber caulk to the underside of the Quick Ring
         that will mount on top of the old ring.
         Set Quick Ring on top of remaining portion of old ring. Note location
         of old toilet bolt slots. The length of the bolt slots in the Quick Ring
         allows for some centering of toilet. Secure the Quick Ring to wood or
         concrete sub floor with screws or anchors.

         FOR CAST IRON RINGS
         The Quick Ring can be mounted directly on top of an old cast iron
         closet ring. Drill holes in any remaining portion of cast iron ring that
         corresponds with holes in Quick Ring. Before securing the Quick Ring
         with screws, apply a bead of butyl rubber caulk to its underside. Large
         gaps or spaces around or underneath the closet ring, can be filled
         with any quicksetting type grouts, cements, etc.

         PLEASE NOTE:                                                 PART
         When setting the toilet use a                               NUMBER
         wax bowl ring with plastic flange.                           21013




                                                                               B-1
Plumbing Specialties



Hose Bibb Anchor
 A quick, easy, long lasting solution to stop loose exterior hose bibbs.
 • Works with any wall material (brick, concrete, vinyl, or stucco)
 • Repair or new home applications
 • 5 minute installation that lasts
 • Fits 1/2” - 3/4” - 1” water supply lines
 • U.S. Patent 5,996,295
                                 Hose Faucet
                                   Anchor

                                               Water Line
 Outside Wall
   Faucet


                                         3” Bracing Screw

                      Bracing screws may dig into
                      the wood or masonry material                                       PART
                                                                                        NUMBER
                                                                                         5023




Quick Lock Hose Bibb Lock                                      Sold with
                                                               Padlock
 Prevents unwanted use of most hose
 bibbs and commercial faucets with
 hose threads
 • Simple, secure, economical
 • High quality diecast
 • All brass key alike padlock
 • Fits hose bibb vacuum breakers
 • U.S. Patent 5,182,928

                                                                           Hose bibb
                                                                           shown with    PART
                                                                           vacuum       NUMBER
                                                                           breaker*      21540




Hose Bibb Vacuum Breaker
 •   Vandal - proof breakoff screw
 •   ASSE 1011 compliant.
 •   UPC compliant
 •   Brass

                                                                                         PART
                                                                                        NUMBER
                                                                                         2139



B-2
                                                                        Plumbing Specialties


                                                      Reinforced & Standard
Dishwasher Drain Hose                                 Garden Hoses
 PASCO Invented
 Dishwasher Drain Hose!
 Our hose is made of
 braided rubber with a
 rayon tire grade cord.
 It is an extremely durable
 hose and resists kinking.
 • Meets AHAM
    Standard DW-1
 • Listed in Table A                                   Reinforced:             PART
    of the UPC                                         • 3 Ply - Nylon        NUMBER     SIZE    LENGTH
 • 7/8” hose approved                                    Vinyl - Braided        531       5/8”     50’
                                    SINCE              • Retains full
    for air conditioner
                                     1966                                       532       5/8”     75’
    condensate drain                                     flexibility down
                                                                                536       3/4”     50’
                                                         to 0° F.
                                                                                555       5/8”   50’ 2 ply
                   PART                               Standard:
                                 SIZE      LENGTH
                  NUMBER                              • Unbraided              PART      SIZE    LENGTH
                                                                              NUMBER
       Order by    50650          5/8”          50’   • Uniform thickness
       the roll    50750          7/8”          50’     & strength              514      1/2”      50’




Dishwasher Air Gap                                    Kink-Free Garden Hose
              • White polypro body with chrome        • Water flows always
                plated ABS top                        • Heavy duty
              • UPC listed
              * Contains air gap, 7/8” x 24” dish-
                washer drain hose and 3 clamps




                        PART             SIZE
                       NUMBER                                                PART
                        50710       Air Gap Alone                                      SIZE      LENGTH
                                                                            NUMBER
                        50712      Air Gap w/Hose*                            560      5/8”        50’



Dishwasher Connector Kit                              Hose Clamps
• Rigid construction
• Will not collapse



                                                                                      PART        SIZE
                                           PART                                      NUMBER
                                          NUMBER                                      60010       5/8”
                                            496                                       60016       7/8”



                                                                                                         B-3
Plumbing Specialties



Rubber Washing Machine                              Rubber Washing Machine
Inlet Hose                                          Inlet Hose w/ 90 Degree Elbow
 • 3/4” female x 3/4” female hose thread             • 3/4” female x 3/4” female hose thread
 • Braided and reinforced                            • Braided and reinforced




                               PART                                               PART
                                           LENGTH                                              LENGTH
                              NUMBER                                             NUMBER
                                464          4”                                    474           4”
                                465          5’                                    475           5’
                                466          6’                                    476           6’
                                468          8’                                    478           8’
      Made in U.S.A.                                 Made in U.S.A.




Rubber Hook Drain Hose                              Rubber Utility Hose
 • Flanged end for multiple sizes                    • “Y” MIXER HOSE
 • Fits 3/4” – 7/8” – 1” outlets                     • 3/4” female hose thread




                               PART        LENGTH
                              NUMBER                                                            PART
                                485          5’                                                NUMBER
                                486          6’                                                  481
      Made in U.S.A.




Rubber Mop Sink Hose                                Wall Bracket for Mop Sink Hose
 • 3/4” female hose thread                          • With mounting screws
 • 36” braided hose (shortened photo)




 Hose and Bracket
 sold separately                            PART                                                PART
                                           NUMBER                                              NUMBER
      Made in U.S.A.
                                             489                                                 488



B-4
                                                                     Plumbing Specialties



                            Packaged BRASS Bolt Sets
                               with Nuts & Washers
                                    Brass bolts made in the U.S.A.
                          PASCO has cataloged the most popular bolt sets.
           Each set comes with 2 brass bolts, 2 NP brass nuts and 2 plated steel washers.
 Please contact us to package any set you require from other componets listed on the following pages.



                                                                            PART             SIZE
                                                                           NUMBER
                                                                             100         1/4” x 2-1/4”
                                                                              94         1/4” x 3-1/2”
                                                                              82        5/16” x 2-1/4”



• With Steel Speed Nuts
                                                                            PART            SIZE
                                                                           NUMBER
                                                                             102         1/4” x 2-1/4”
                                                                             107         1/4” x 3-1/2”
                                                                              59        5/16” x 2-1/4”




• With “Push On”
  Speed Washers
                                                                             PART            SIZE
                                                                           NUMBER
                                                                            102-SN       1/4” x 2-1/4”
                                                                            107-SN       1/4” x 3-1/2”




• With Speed Nuts &
  Round Plastic Bolt Caps


                                                                            PART            SIZE
                                                                           NUMBER
                                                                             106         1/4” x 2-1/4”



• With Hex Speed Nuts

                                                                            PART            SIZE
                                                                           NUMBER
                                                                             28         1/4” x 2-1/4”
                                                                             30         1/4” x 3-1/2”



                                                                                                    B-5
Plumbing Specialties




           Packaged ALL STAINLESS STEEL Bolt Sets
             with Stainless Steel Nuts & Washers
                       Marine grade 305 stainless steel - packaged one pair per bag
                                    Easily cut with Tiny Tim Hacksaw                    Won’t Corrode



                                                                               PART           SIZE
                                                                             NUMBER
                                                                              100-SS      1/4” x 2-1/4”
                                                                              94-SS       1/4” x 3-1/2”



  • With Tinnerman Nuts

                                                                               PART           SIZE
                                                                             NUMBER
                                                                              102-SS      1/4” x 2-1/4”
                                                                              107-SS      1/4” x 3-1/2”



  • With Plastic Speed Washers

                                                                              PART           SIZE
                                                                             NUMBER
                                                                             102-SSN      1/4” x 2-1/4”
                                                                             107-SSN      1/4” x 3-1/2”



  • With Tinnerman Nuts &
    Round Plastic Bolt Caps

                                                                               PART          SIZE
                                                                             NUMBER
                                                                              106-SS      1/4” x 2-1/4”



  • “DOUBLE NUT”
    With Hex Speed Nuts                                                       PART           SIZE
                                                                             NUMBER
                                                                              28-SS       1/4” x 2-1/4”
                                                                              30-SS       1/4” x 3-1/2”


Bulk Stainless Steel                  Bolts Only                     Nuts Only           Washers Only
Bolts, Nuts & Washers -
                                   PART                        PART                          PART
100 Pack                                       SIZE                              SIZE
                                 NUMBER                       NUMBER                        NUMBER
                                  104-SS    1/4” x 2-1/4”     1647-SS            1/4”         140
                                  111-SS    1/4” x 3-1/2”

B-6
                                                                                     Plumbing Specialties



                 Closet Bolts, Screws, Nuts & Washers
                                                    100 Bulk packed

Closet Studs                                                Closet Screws
 • Brass                                                      • Brass

                                                                                                    PART             SIZE
                             PART                                                                  NUMBER
                                             SIZE                                                    120          1/4” x 2-1/4”
                            NUMBER
      Made in U.S.A.          108        1/4” x 2-1/4”         Made in U.S.A.
                                                                                                     121          1/4” x 3-1/2”



Closet Bolts                                                Closet Bolt Washers
 • Brass


                              PART                            Round Washer                                            Oval Washer
                                         SIZE
                             NUMBER                            PART                                                PART
                                                                                  MATERIAL              HOLE SIZE NUMBER
                               110   1/4” x 2-1/4”            NUMBER
                               111   1/4” x 3-1/4”              138             Plated Steel - Round      5/16”      —
                               112  5/16” x 2-1/4”              140             Heavy Stainless Steel     5/16”     147
                               113  5/16” x 3-1/2”              142               Heavy NP Brass          5/16”     149
      Made in U.S.A.




Plastic Bolt Caps                                           Speed Nuts




                        PART                                                               PART
                                   SIZE      SHAPE                                                        SIZE      MATERIAL
                       NUMBER                                                             NUMBER
                         912       1/4”        Oval                                         136           1/4”        Steel
                         913       1/4”       Round                                        136-P          1/4”        Plastic
    * With snap
      on washer        917-PR* 1/4” or 5/16” Round                                          143           5/16”        Steel



Open Head Bolt Nuts                                         Closed Head Screw Nuts
                                                              • Plated Brass



                   PART       SIZE      MATERIAL
                  NUMBER
                    132        1/4”     Plated Brass                                                     PART          SIZE
                    133       5/16”     Plated Brass                                                    NUMBER
                  1647-SS      1/4”   Hex Stainless Steel                                                 134           1/4”



                                                                                                                               B-7
Plumbing Specialties



         Closet Bolts, Screws, Nuts & Washers
                                               100 Bulk packed

Combo Brass Closet                                     Combo Brass Closet Bolts,
Screws, Nuts & Washers                                 Nuts & Washers




                                                                      * Breakoff Bolts
        PART                         ROUND                              PART                        ROUND
                      SIZE                                                               SIZE
       NUMBER                        WASHER                            NUMBER                       WASHER
         152      1/4” x 2-1/2”       Plated                             180        1/4” x 2-1/4”    Plated
         153      1/4” x 3-1/2”       Steel                              181        1/4” x 3-1/2”    Steel
         156      1/4” x 2-1/2”       Stainless                          184        1/4” x 2-1/4”   Stainless
         157      1/4” x 3-1/2”         Steel                            185        1/4” x 3-1/4”     Steel
         162      1/4” x 2-1/2”        Plated                            188        1/4” x 2-1/4”    Plated
         163      1/4” x 3-1/2”        Brass                             189        1/4” x 3-1/4”    Brass




Combo Brass Closet Bolts
Nuts & Washers                                         Plastic Toilet Shims
                                                         “Takes the Wobble Out”
                                                         • Hard or Soft




       PART                         ROUND
                   SIZE
      NUMBER                        WASHER                                     PART
        192     1/4” x 2-1/4”                                                               TYPE    QUANTITY
                                                                              NUMBER
                                      Plated
        193     1/4” x 3-1/2”         Steel                                     234         Hard        10
        196     1/4” x 2-1/4”                                                  2346         Hard       300
        197    5/16” x 3-1/2”     Stainless Steel         Made in U.S.A.       2347         Soft       300



B-8
                                                                           Plumbing Specialties



Closet Bowl Wax Gasket                                   Closet Flange Extension
                                                          • 1/4” thick
                                                          • Durable ABS




                         PART         DESCRIPTION
                        NUMBER
                          268            Gasket                                                     PART
                          269         Gasket w/ #102                                               NUMBER
      Made in U.S.A.
                                      brass bolt sets     Made in U.S.A.
                                                                                                    1018



Flex-A-Flange                                            Closet Flange Extension Kit
 Closet Bowl Wax Gasket                                   Kit Contains:
 With Plastic Flange                                      • 3 Self-sealing extenders
 • For 3” or 4” cast iron, brass, plastic                 • With 1/4” x 3-1/2” closet bolts,
   and steel/plastic combo closet rings.                    nuts & washers




                         PART          DESCRIPTION                                 PART
                        NUMBER                                                                   BOLT SET
                          270              Flange                                NUMBER
                          271          Flange w/#102                              1018-K       Stainless Steel
      Made in U.S.A.                   brass bolt sets                           1018-BR            Brass


Sponge Rubber                                            Sponge Rubber
Closet Bowl Gasket                                       Closet Bowl Gasket
 • Resists mold, mildew and fungus                        Covers Entire Width of Closet Ring
                                                          • Resists mold, mildew and fungus
                                                          • Has holes for closet bolts




                         PART          THICKNESS &                                PART         THICKNESS &
                        NUMBER           DIAMETER                                NUMBER         DIAMETER
                         2228           9/16” x 5-1/4”                            2227          3/8” x 6-3/4”
      Made in U.S.A.     2230           3/4” x 5-1/4”     Made in U.S.A.
                                                                                  2231          3/4” x 6-3/4”



                                                                                                           B-9
Plumbing Specialties



Brass Tank to Bowl Bolt Sets
 Each Set Contains:
 • Brass Bolts
 • Brass Hex Nuts                                                                             WASHERS
                                                               PART
 • Cloth Inserted Rubber Washers                              NUMBER            SIZE       RUBBER
                                                                                                  PLATED
 • Plated Brass Washers                                                                            BRASS
                                                                  235         5/16” x 3”     2         2
       Made in U.S.A.
                                                                  237         5/16” x 3”     4         4



Stainless Steel Tank to Bowl Bolt Sets                            Won’t
 Each Set Contains:                                              Corrode
 • 2 Stainless Steel Bolts
 • 4 Stainless Steel Hex Nuts
 • 4 Cloth Inserted Rubber Washers                                                   PART          SIZE
 • 4 Stainless Steel Washers                                                       NUMBER
                                                                                    237-SS       5/16” x 3”
       Made in U.S.A.




Tank to Bowl Connector Kit with Rubber Components
 With Rubber Gasket
 Each Set Contains:
 • 1 Rubber Gasket
 • 2 Bolts:
     Brass or Stainless Steel                                    PART         GASKET         MATERIAL
 • 4 Heavy Washers:                                            NUMBER          TYPE
     Brass or Stainless Steel                                     437           Regular          Brass
 • 4 Rubber Washers                                             437-SS          Regular     Stainless Steel
 • 4 Hex Nuts: Brass or Stainless Steel                           439           AmStan           Brass
       Made in U.S.A.                                           439-SS          AmStan      Stainless Steel



Cloth Inserted Rubber Washers                      Hex Nut - Brass - Stainless Steel
 • For Tank to Bowl Bolt                            • For Tank to Bowl Bolt

                                                                    PART           SIZE       MATERIAL
                                           PART                   NUMBER
                                          NUMBER                    243-B          5/16”         Brass
                                            242                    243-SS          5/16”    Stainless Steel
       Made in U.S.A.




Tank to Bowl Bolts - Brass - Stainless Steel

                                                                   PART    SIZE               MATERIAL
                                                                 NUMBER
                                                                    232  5/16” x 3”              Brass
                                                                  232-SS 5/16” x 3”         Stainless Steel
       Made in U.S.A.




B-10
                                                      Plumbing Specialties



                                  Toilet Tank Trip Levers
Premium Quality
   • 8” Flat brass arm
   • CP Die cast handle
   • Die Cast lock nut
                                                                   PART
                                                                  NUMBER
                                                                   1055




Economy
   • 8” ABS Plastic arm
   • CP ABS Plastic handle

                                                                   PART
                                                                  NUMBER
                                                                   1047



Economy
   •   8” Round brass arm
   •   CP Die cast handle
   •   Die cast spud
   •   NEW finger tight locknut                                    PART
                                                                  NUMBER
                                                                   1040




Economy
   •   8” Round brass arm
   •   CP Die cast handle
   •   Plastic spud
   •   NEW finger tight locknut                                    PART
                                                                  NUMBER
                                                                   1041




Economy
   • 4” ABS Plastic arm
   • CP ABS handle
   • Replaces American Standard
     #3521-136                                                     PART
                                                                  NUMBER
                                                                   1046




                                                                      B-11
Plumbing Specialties



                                    Toilet Tank Trip Levers
Index Style
       •   8” Round brass arm
       •   CP Die cast handle
                                                                                  PART
       •   Plastic spud                                                          NUMBER
       •   Plastic lock nut                                                       1057


Mansfield
       •   9” White plastic arm
       •   CP Die cast handle
       •   Plastic spud                                                           PART
       •   Plastic lock nut                                                      NUMBER
                                                                                  1045


Western Pottery & Toto
       •   10” Round brass arm                  #1058 Western Pottery
       •   CP Die cast handle
                                                                                  PART
       •   Plastic spud                                                          NUMBER
       •   Plastic locknut
                                                                                  1058
       •   Side mount                                               #1059 Toto
                                                                                  1059


Kohler Wellworth II
       •   8” Plastic arm
       •   CP Die cast handle
       •   Plastic spud                                                           PART
       •   Plastic locknut                                                       NUMBER
                                                                                  1053


Eljer
       •   10” Brass arm
       •   CP Die cast handle
       •   Plastic spud
       •   Plastic locknut                                                        PART
                                                                                 NUMBER
       •   Side mount
                                                                                  1054


Offset - Premium Quality
       •   9-1/2” Offset flat brass arm
       •   CP Die cast handle
       •   Modern styling
       •   High Quality                                                           PART
                                                                                 NUMBER
       •   Die cast locknut
                                                                                  1056



B-12
                                                          Plumbing Specialties




      • Universal replacement flapper                                   PART
                                                                       NUMBER
      • Preferred by plumbers for superior
        quality and reliability since 1954.                              54




      • Premium quality Chlorazone material
                                                                        PART
        withstands chloramine and toilet tank cleaners                 NUMBER
      • 5-Year guarantee                                                2001
      • Universal replacement flapper




      • Fits most 1.6 gallon toilets                                    PART
                                                                       NUMBER
      • The adjustable water-saver saves up to 50%
        more water when used in conventional toilets.                    16




      Fits Kohler® Rialto™/Float
      • Replaces Kohler p/n 83064
                                                                        PART
      • Embedded styrofoam float                                       NUMBER
NEW   • Fits specific Kohler one-piece toilets
                                                                        2010
      • Premium red Chlorazone® rubber resists chlorine




      Fits Kohler® Hinge
      • Replaces Kohler p/ns 84995 & 1000490
                                                                        PART
      • Flapper hinges onto back of flush valve                        NUMBER
NEW   • Fits specific Kohler one-piece toilets
                                                                         2011
      • Premium red Chlorazone® rubber resists chlorine




      Fits Kohler® Shark Fin
      • Replaces Kohler p/ns 84318, 84314,
        85655 and 89825                                                 PART
                                                                       NUMBER
NEW   • Premium red Chlorazone® rubber resists chlorine
                                                                        2012



                                                                          B-13
Plumbing Specialties




          With Styrofoam float
          • This flapper includes the styrofoam float
            and is adjustable for the perfect flush




                                                                    PART
                                                                   NUMBER
                                                                    2004




          Fits TOTO® G-Max™ Flapper
          • Authorized replacement flapper for
            TOTO G-Max toilets                                      PART
          • 3” sealing surface for larger TOTO flush valve seats   NUMBER
          • Premium red Chlorazone® rubber resists chlorine         2021




          Fits TOTO® Power Gravity™ Flapper
          • Authorized replacement flapper for
            TOTO Power Gravity toilets
                                                                    PART
          • 3” sealing surface for larger TOTO flush valve seats   NUMBER
          • Premium red Chlorazone® rubber resists chlorine         2022K




          Fits Kohler® Class Five Flapper
          • Larger 3-1/4 replacement flapper
          • Replaces Kohler p/ns 1016546 &1042313                   PART
          • Engineered materials resist chlorine                   NUMBER
          • Five year guarantee                                     3010K




          Fits American Standard® Champion®
          Flush Valve Seal
          • Replaces AmStan p/n 738651-0070A                        PART
                                                                   NUMBER
          • Engineered materials resist chlorine
                                                                     428



B-14
                                                                         Plumbing Specialties



Rubber Flapper                                           3 Way Flapper
 Stainless Steel Chain                                    Stainless Steel Chain
 • High quality rubber                                    • High quality vinyl
 • Resistant in tank bowl cleaners




                                               PART                                                PART
                                              NUMBER                                              NUMBER
                                               1026                                                1028-S




Plastic Flush Valve Flapper                              Rubber Flapper
 Stainless Steel Chain                                    8” Chain
 • High quality vinyl                                     • For Kohler
                                                          • Resistant to tank bowl cleaners




                                               PART                                                PART
                                              NUMBER                                              NUMBER
                                               1033                                                1031




American Standard Flapper                                Disk Seat Flapper
 With Float                                               For American Standard




        PART        REPLACES           DESCRIPTION                              PART
       NUMBER       AMSTAN #                                                                  DESCRIPTION
                                                                               NUMBER
        1038             #5               Low Profile
                                                                                1035          Combo Fit-All
        1039             #6               High Profile
                                                                                1036           Screw-On
        1042                Repair kit with chain
                           rubber grommet & clip                                1037            Snap-On



                                                                                                         B-15
Plumbing Specialties



Douglas Flush Valve
•    Rubber washer
•    Solid ring guide
•    Locknut
•    Overflow tube
                                                                                  PART         DESCRIPTION
                                                                                 NUMBER
                                                                                  1027       Brass Locknut
                                                                                  1029     White Plastic Flush
                                                                                           Valve, with Flapper



Lift Wires - Brass                                         Brass Overflow Tubes
• Order in
  packs of
  25 or 100
                          PART                                                  PART
                                    DESCRIPTION
                         NUMBER                                                NUMBER DIAMETER LENGTH
                           851    5-1/2” Lower lift wire                         870       1”     10”
            Made in
            U.S.A.         856      9” Upper lift wire      Made in U.S.A.       873  1” x 1-1/8” 10”



Brass Float Rods
1/4” - 20 Threads                                                                       PART       LENGTH
                                                                                       NUMBER
                                                                                         882           8”
                                                                                         883           9”
                                                                                         884          10”
            Made in U.S.A.
                                                                                         886          12”



Tank Ball                                                  Tank Floats
 •   Resists chlorinated water                              Copper or Plastic
 •   Never swells                                           • 1/4” Float Rod
 •   One ball for all sizes
 •   High quality rubber




                                                                              PART      SIZE         TYPE
                                             PART                            NUMBER
                                            NUMBER                           1060-12   4” x 5”    Oval Copper
                                             1032           Made in U.S.A.    1073     4” x 5”    Oval Plastic



B-16
                                                 Plumbing Specialties



Brass Urinal Outlet Spud
 IPS or Sweat Connection
 • With studs, washers and nuts and                                          BOLT
                                       PART    DRAIN          URINAL         HOLE
   #2096 sponge type gasket           NUMBER CONNECTION        TYPE         CENTERS
                                       94700    2” IPS         Crane          5-1/2”
                                       94701   2” Sweat        Crane          5-1/2”
                                       94702    2” IPS         Crane          5-1/2”
                                                             Hex Bolts
                                       94703    2” IPS          UR           4-1/2”
                                       94704    2” IPS         Elijer        4-1/4”
                                       94705   2” Sweat        Elijer        4-1/4
                                       94706    2” IPS        AmStan           4”




Closet & Urinal Spuds


                                       PART    TYPE           SIZE          LOCKNUT
                                      NUMBER
                                        956    Closet            2”           Brass
                                       956A    Closet            2”          Diecast
                                        957    Closet       2” x 1-1/2”       Brass
                                        958    Closet       2” x 1-1/4”       Brass
                                        959    Closet         1-1/2”          Brass
                                        960    Closet         1-1/4”          Brass
                                        961    Urinal        1” x 3/4”        Brass
                                        962    Urinal      1-1/4” x 3/4”      Brass
                                        963    Closet     1-1/2” x 1-1/4”     Brass




Anti-Siphon Ballcocks
 • Reliable - Quiet
 • Brass float rod
 • Adjustment screw


                                                   PART          DESCRIPTION
                                                 NUMBER
                                                   1009                8-1/2”
                                                   1010                 10”
                                                   1011                 12”
                                                  1015-N           Diaphragm &
                                                                Adjustable Screw
                                                   1320        Plastic Coupling Nut
                                                   2099           Shank Washer



                                                                                  B-17
Plumbing Specialties



Lock Nuts

                                    PART        SIZE         MATERIAL
                                   NUMBER
                                    1294        1/2”           Die Cast
                                    1295        3/4”           Die Cast
                                    1301       1-1/2”          Die Cast
                                    1303         2”            Die Cast
                                    1306       1-1/4”           Brass
                                    1307       1-1/2”           Brass
                                    1312       3-3/8”    Brass Basket Strainer
                                    1316       3-3/8”   Die Cast Basket Strainer




Lavatory Coupling Nuts



                                     PART      SIZE         MATERIAL
                                   NUMBER
                                     1322  1/2” x 7/16”        Brass
                                    1326-C  1/2” x 3/8”     CP Die Cast
                                    1328-C  1/2” x 1/2”     CP Die Cast
                                    1329-C  3/4” x 1/2” CP Die Cast Bathcock
                                     1335   1/2” x 1/2”        Brass
                                    1335-C  1/2” x 1/2”      CP Brass




Ballcock Coupling Nut      Brass Friction Rings




                                                    PART            SIZE
                                                   NUMBER
                                                    1385         1/2” x 3/8”
                                                    1389         1/2” x 1/2”
        PART                                        1391           1-1/4”
                MATERIAL                            1392       1-1/2” x 1-1/4”
       NUMBER
        1320     Plastic                            1394           1-1/2”
        1321     Brass                              1397         3/4” x 3/8”



B-18
                                                     Plumbing Specialties



Die Cast Slip Joint Nuts


                                           PART              SIZE                  FINISH
                                         NUMBER
                                          1324-C          2” x 1-1/2”              Chrome
                                          1330-C            1-1/4”                 Chrome
                                          1331-C        1-1/2” x 1-1/4”            Chrome
                                          1332-C        1-1/2” x 1-3/8”            Chrome
                                          1333-C            1-1/2”                 Chrome
                                          1333-P            1-1/2”                  Plain
                                          1334-C               2”                  Chrome


Brass Slip Joint Nuts

                                           PART              SIZE                  FINISH
                                         NUMBER
                                           1336             1-1/4”                 Rough
                                          1336-C            1-1/4”                 Chrome
                                           1337         1-1/2” x 1-1/4”            Rough
                                          1337-C        1-1/2” x 1-1/4”            Chrome
                                           1338             1-1/2”                 Rough
                                          1338-C            1-1/2”                 Chrome
                                           1339               2”                   Rough
                                          1339-C              2”                   Chrome


Chrome Slip Joint Nut Sets with Washer, Friction Ring

                                          PART               SIZE              MATERIAL
                                         NUMBER
                                          1346-C            1-1/4”                  Brass
                                          1347-C        1-1/2” x 1-1/4”             Brass
                                          1348-C            1-1/2”                  Brass
                                          1349-C            1-1/4”                 Die Cast
                                          1350-C        1-1/2” x 1-1/4”            Die Cast
                                          1351-C            1-1/2”                 Die Cast



Plastic Slip Joint Nuts            Brass Solder Collars
 PVC                                • Threads fit slip joint nuts
 • One Piece


                PART                                     PART          SLIP         FOR USE
                          SIZE                          NUMBER        JOINT           WITH
               NUMBER
                1352      1-1/4”                         1314             1-1/2”     Tubular
                1353      1-1/2”                         1315                         CWT



                                                                                              B-19
Plumbing Specialties



Tank-to-Bowl Gaskets
 • Sponge Rubber
                                                                   PART           DESCRIPTION
                                                                  NUMBER
                                                                   2096              Regular
                                                                   2097        Recessed for AmStan
                                                                   2098              Gerber



Slip Joint Washers
 • Square Cut Washers                                                       PART       SIZE
                                                                           NUMBER
                                                                            2201    2” x 1-1/2”
                                                                            2202         2”
                                                                            2204      1-1/2”
                                                                            2208  1-1/2” x 1-1/4”
                                                                            2209      1-1/4”


Poly Washers for Tailpieces


                                                              PART         SIZE          DESCRIPTION
                                                             NUMBER
                                                              2214         1-1/2”          Beveled
                                                              2218     1-1/2” x 1-1/4”     Beveled
                                                              2219         1-1/4”          Beveled
                                                              2222         1-1/2”          Flanged



Tailpiece Washer                                   Ballcock Shank Washer
 • Cloth Inserted                                   • Beveled Rubber
   Rubber
 • Top quality,
   excellent seal

                         PART                                                                PART
                                     SIZE
                        NUMBER                                                              NUMBER
                          2211   1-1/2” x 1-1/4”                                             2099



Garden Hose Washer                                 Cone Filter Washer
• Fits 3/4” FHT                                     • Fits 3/4” FHT

                                      PART                                                   PART
                                     NUMBER                                                 NUMBER
                                      2224                                                   2244



B-20
                                                        Plumbing Specialties



1-1/4” Mack Washer                     Wall Hung Urinal Spud Washer
 For Pop-Ups                            •   Large style for additional sealing surface
 • Rubber                               •   4-3/8” OD x 2-7/8” ID
                                        •   1/2” Thick
                                        •   Sponge
                               PART         Rubber                                     PART
                              NUMBER                                                 NUMBER
                               2074                                                    2083



Spud Friction Rings
 Galvanized

                                                                  PART              SIZE
                                                                 NUMBER
                                                                  2075               2”
                                                                  2078             1-1/2”
                                                                  2079             1-1/4”
                                                                  2080            1” x 3/4”



Spud Washers
• Rubber
                                                                  PART              SIZE
                                                                 NUMBER
                                                                  2085                2”
                                                                  2086           2” x 1-1/2”
                                                                  2088             1-1/2”
                                                                  2089             1-1/4”
                                                                  2090            1” x 3/4”



Waste & Overflow Washers
• Sponge Rubber
                                                            PART         DESCRIPTION
                                                           NUMBER
                                                            2091         2-1/8” x 3” x Beveled
                                                            2092         1-7/8” x 2-7/8” x 3/8”




Douglas Flush Valve Washer
 • Sponge Rubber
 • Fits urinal outlet spuds
                                                                                     PART
                                                                                    NUMBER
                                                                                     2093



                                                                                             B-21
Plumbing Specialties



Garbage Disposal Shield                                           O-Ring Pick



                                                     PART                                                       PART
                                                    NUMBER                                                     NUMBER
                                                     1358                                                       5200



                                                                  Faucet Stem Washer
Plumbers Pack O-Ring Kit                                          Assortment - Flat
 Popular O-ring sizes                                              • 00-1/2” Trade Size
 in a reusable                                                     • 350 Pieces
 box                                                               • 8 common sizes
                                                                     fit most stems
                                                                     manufactured

                                                     PART                                                       PART
                                                    NUMBER                                                     NUMBER
                                                     2250                                                       2870
       Made in U.S.A.                                               Made in U.S.A.




Cone Slip Joint Washers                                           Soap Dispenser
                                                                                     THROUGH THE COUNTER
                                                                                     • 2” Spout    10” Length
                                                                                     • Chrome plated brass pump
                                                                                     • Mounts through counter
   2276       2277 2277-A 2285               2286      2287                          • Unbreakable poly bottle
                                                                                     • Holds 7 oz.

    PART                       SIZE                                                     PART
                                                 USAGE                                               DESCRIPTION
   NUMBER               I.D.          H.T.                                            NUMBER
     2276                3/8”      3/8”           1/2” Nut                              2042       Complete Dispenser
     2277                3/8”      3/8”          3/8” Tube                             2042-B            Bottle Only
    2277-A              7/16”     7/16”           1/2” Nut                             2042-N     Brass Nipple with Nut &
                                             7/16” or 1/2” Tube                                    Friction Ring Washer




Candle Wicking                                                    Graphite Packing
 • Seals bonnet nuts                                              • 3/32” x 24” Length
 • Lubricates stems
 • Random length


                                                         PART                                                   PART
                                                        NUMBER                                                 NUMBER
                                                         2872                                                   2290



B-22
                                                       Plumbing Specialties



Commercial Grid Style Lavatory Drain
 Highest Quality
 • #1175 & 1179 Chrome plated brass body
 • #1176 Stainless steel body
 • 1-1/4” Stainless steel tailpiece
 • Brass locknut                                                   PART         TAILPIECE
 • Rubber gasket with overflow                                    NUMBER         LENGTH
                                                                    1175            4”
                                            Individually Boxed     1176*            6”
                                               * Most Popular       1179           12”




Handicap Commercial Grid Style Lavatory Drain
 Highest Quality
 • Chrome plated brass body
 • 1-1/4” stainless steel tailpiece
 • Rubber gasket with overflow


                                                                  PART     DESCRIPTION
                                                                 NUMBER
                                           Individually Boxed    1177-TP   With Tailpiece




Handicap Style Lavatory Drain
 Less Waste Elbow Highest Quality
 • Chrome plated brass body
 • Threaded 1-1/4” for waste elbow
 • Brass locknut
 • Rubber gasket

                                                                                  PART
                                                                                 NUMBER
                                                           Individually Boxed      1177



Rubber Stopper Lav Drain
 • 20 GA CP brass
 • 1-1/4” x 6” tailpiece
 • Rubber stopper with chain




                                                                                  PART
                                                                                 NUMBER
                                                           Individually Boxed      1178



                                                                                      B-23
Plumbing Specialties



          Brass Waste Connectors (Desanko Fittings)
The charts below let you choose the type of slip joint nut, either chrome plated die cast or plain brass and the type
of compression ring, either brass or poly. To order waste connectors with chrome plated brass nuts, add CP to
waste connector part number.


Tubular X Male Pipe Thread (Outlet)
Female Copper Sweat Under MPT

                                                       PART          TUBULAR                       COMPRESSION
                                                                                     SLIP NUT
                                                      NUMBER           X MPT                          RING
                                                        1893       1-1/4” x 1-1/2”    Chrome
                                                        1894           1-1/2”         Die Cast          Brass
                                                        1943       1-1/4” x 1-1/2”     Rough
                                                        1944           1-1/2”          Brass
                                                        1905       1-1/4” x 1-1/2”    Chrome             Poly
                                                        1906           1-1/2”         Die Cast
                                                       1944-S          1-1/2”          Rough            Brass
                              *Complies with UPC      w/stops*                         Brass



Tubular X Female Pipe Thread (Outlet)

                                                       PART          TUBULAR                       COMPRESSION
                                                                                     SLIP NUT
                                                      NUMBER           X FPT                          RING
                                                        1895           1-1/4”         Chrome
                                                        1896       1-1/4” x 1-1/2”    Die Cast
                                                        1897           1-1/2”                           Brass
                                                        1946       1-1/4” x 1-1/2”     Rough
                                                        1947           1-1/2”          Brass
                                                        1908       1-1/4” x 1-1/2”    Chrome             Poly
                                                        1909           1-1/2”         Die Cast
                                                       1947-S          1-1/2”          Rough            Brass
                              *Complies with UPC      w/stops*                         Brass



Female Copper Sweat (Outlet)


                                                       PART          TUBULAR                       COMPRESSION
                                                                                     SLIP NUT
                                                      NUMBER        X COPPER                          RING
                                                       1899        1-1/4” x 1-1/2”    Chrome
                                                       1900            1-1/2”         Die Cast          Brass
                                                       1949        1-1/4” x 1-1/2”     Rough
                                                       1950            1-1/2”          Brass
                                                        1911       1-1/4” x 1-1/2”    Chrome             Poly
                                                       1912            1-1/2”         Die Cast

                                                                                          Continued on following page
B-24
                                                                               Plumbing Specialties



          Brass Waste Connectors (Desanko Fittings)
The charts below let you choose the type of slip joint nut, either chrome plated die cast or plain brass and the type
of compression ring, either brass or poly. To order waste connectors with chrome plated brass nuts, add CP to
waste connector part number.




Male Copper Sweat (Outlet)




                                                      PART         TUBULAR                         COMPRESSION
                                                                                     SLIP NUT
                                                     NUMBER        X COPPER                           RING
                                                      1901           1-1/4”           Chrome
                                                      1903           1-1/2”          Die Cast           Brass
                                                      1953           1-1/2”         Rough Brass
                                                      1915           1-1/2”            Poly              Poly



Chrome Plated Brass Cover Tube for Copper or CPVC
  • Slips over either copper of CPVC supply lines between the wall and angle stop.
  • Fits over 5/8” OD Tube
  • 3-1/2” Length
                                                                                                          PART
                                                                                                         NUMBER
                                                                                                          8489



Chrome Plated Copper Supply Tubing
  • “Spaghetti”
  • 3/8” x 6 Foot - soft
  • 50 Per case
                                                                                                          PART
                                                                                                         NUMBER
                                                                                                          17990



Brass Tubular Compression Rings


                                                                                              PART          SIZE
                                                                                             NUMBER
                                                                                              1990         1-1/4”
                                                                                               1992        1-1/2”



                                                                                                                B-25
Plumbing Specialties



                                                      Aerators
                                  Quality recognized for years throughout the industry!
Premium Quality
 •   Chrome plated brass
 •   Special stainless steel screen                               SLOTTED
 •   Stylized appearance
                                                                    PART
 •   NSF listed Santoprene® washer                                                    THREADS
                                                                   NUMBER
 •   All aerators are individually bagged
                                                                    2103         Female 55/64” - 27
 •   Meets ANSI A-112.18M
 •   2.2 GPM at 60 PSI                                              2105       Dual 15/16 - 55/64” - 27
 •   2.5 GPM at 80 PSI                                            NON-SLOTTED - POLISHED BRASS
                                                                   2105PB Dual 15/16 - 55/64” - 27

                                                                  SLOTTED WATER SAVER
                                                                    2104   Dual 15/16 - 55/64” - 27



Economy Quality Aerators
                                                                                                                    TPR
 •   Chrome plated brass                                          SLOTTED
 •   Stylized appearance                                            PART              THREADS
 •   NSF listed Santoprene® washer                                 NUMBER
 •   All aerators are individually bagged                           2124       Dual 15/16 - 55/64” - 27
 •   Meets ANSI A-112.18M                                           2130          Male 15/16” - 27              TPU+STAINLESS
 •   2.2 GPM at 60 PSI                                              2131         Female 55/64” - 27
 •   2.5 GPM at 80 PSI
                                                                  NON-SLOTTED WATER SAVER
                                                                    2132      Male 15/16” - 27
                                                                    2134   Dual 15/16 - 55/64” - 27
                                                                                                                    POM


Aerator Counter Displays
 These displays are                                                                                                 POM
 guaranteed to trigger an
 impulse purchase by the
 plumber!                                                              SLOTTED PREMIUM QUALITY
                                                                         PART
 Small display generates                                                             THREADS
                                                                        NUMBER                                    STAINLESS
 BIG profits!                                                             2106    Contains 144-2105
                                                                          2107    Contains 144-2104
 24 tubes - 6 aerators per tube
                                                                                     Water Saver

                                                                       NON-SLOTTED ECONOMY QUALITY                STAINLESS
                                                                         2125     Contains 144-2124
                                                                         2136     Contains 144-2134
                                                                                     Water Saver
                                                                                                                   BRASS
                                                             Components in contact with water are lead free.
                                                          The only component made of brass is the housing and
                                                                 it does not come in contact with water.
B-26
                                                                       Plumbing Specialties


Kitchen Sink Hose & Spray Head                      Fit All Kitchen Basket Strainer                         •
• Replaces existing units                           •   Stainless steel
                                                    •   Fits most styles of kitchen basket strainers
                                                    •   CP brass lift post
                                                    •   Rubber stopper



                  PART         DUAL THREADS
                NUMBER
                  1366          Complete Unit
                  1367          Hose, Coupling
                 1367-W       White Complete Unit                                                 PART
                  1368            Head ONLY                                                      NUMBER
                 1368-W        White-Head ONLY                                                    21926



Junior Basket Strainer                              Junior Duo Strainer
 For 2” - 2-/12” Outlet                              For 2” - 2-/12” Outlet
 • CP Brass body                                     • CP Brass body
 • Stainless steel                                   • Stainless steel basket
   basket                                            • Complete with
 • Complete with                                       washers & nuts
   washers & nuts




              PART                     SLIP JOINT                    PART                    SLIP JOINT
                            LOCKNUT                                               LOCKNUT
             NUMBER                        NUT                      NUMBER                       NUT
              1361          Die Cast      Plated                     1365         Die Cast      Plated
                                         Die Cast                                              Die Cast
              1361-BN        Brass        Brass                      1365-BN       Brass        Brass
               1361-B            Basket Only                          1365-B           Basket Only



Tray Plug                                           Flat Duplex Strainer
 For 2” - 2-/12” Outlet                              For 2” - 2-/12” Outlet
 • CP Brass body                                     • CP Brass body
 • Rubber Plug                                       • Stainless steel strainer
 • Complete with                                     • Complete with
   washers & nuts                                      washers & nuts


              PART                     SLIP JOINT                    PART                      SLIP JOINT
                            LOCKNUT                                               LOCKNUT
             NUMBER                       NUT                       NUMBER                        NUT
              1370          Die Cast     Plated                      1371         Die Cast       Plated
                                        Die Cast                                                Die Cast
              1370-BN        Brass        Brass                     1371-BN        Brass          Brass



                                                                                                       B-27
Plumbing Specialties




EZ ON                                                                        Installs in
                                                                             less than
                                                                            30 seconds!




EZ ON                            EZ ON - Bright                  EZ ON
Satin Stainless                  Polished Stainless              Brushed Nickel
Steel Finish                     Steel Finish                    Finish
 •   304 stainless steel body     •   304 stainless steel body    • All surfaces are PVD finish
 •   Polished drain flange        •   All surfaces polished       • Finish will not chip or
 •   Stainless steel basket       •   Stainless steel basket        corrode
 •   Fits sink openings of        •   Fits sink openings of       • Basket finished to match
     3 1/2” to 4”                     3 1/2” to 4”                • Fits sink openings of
                                                                    3 1/2” to 4”




                         PART                            PART                           PART
                        NUMBER                          NUMBER                         NUMBER
                         21901                           21907                          21905



B-28
                                                Plumbing Specialties



Specification Grade Stainless Steel Basket Strainer - 2 Styles
 •   Heavy duty - cup style
 •   3-1/2” to 4” Sink drain opening
 •   304 Stainless steel bodies
 •   Stainless steel basket
 •   Die cast locknut and slip joint nut
 •   Poly tailpiece washer
 •   #21915 Specification basket strainer has
     brass locknut and slip joint nut
 Equal to:
 Watts 644003
 Dearborn 14                                       PART
 *Watts 652003                                             DESCRIPTION
                                                  NUMBER
                                                   21914   Complete Unit
                                                   21922    Basket Only
                                                   21924    Basket Only




Spin Lock Chrome Plated Brass Basket Strainer
 •   3-1/2” to 4” sink drain openings
 •   Stainless steel screw in basket
 •   Brass locknut and slip joint nut
 •   Poly tailpiece washer
 Equal to:
 Dearborn 17
 Watts 653003


                                                   PART    DESCRIPTION
                                                  NUMBER
                                                   21917   Complete Unit
                                                   21923    Basket Only



Plumber Quality Chrome Plated Brass Basket Strainer
 •   3-1/2” to 4” sink drain openings
 •   Stainless steel stick post basket
 •   Die cast slip joint nut and locknut
 •   Poly tailpiece washer
 Equal to:
 Dearborn 16
 Watts 2-8-3
 Sanitary Dash SS250
 Garvin 2250
                                                   PART    DESCRIPTION
                                                  NUMBER
                                                   21906   Complete Unit



                                                                      B-29
Plumbing Specialties



Lavatory Legs                                      Brass Pop-Up Assemblies
 Adjustable To Fit a                                Highest Quality
 Variety of China and                               • Chrome plated brass
 Enamel Lavatories                                  • Brass locknut
 • Chrome plated
 • 2” Adjustment
 • 30” overall length                               *plastic
 • Boxed by the pair
 • Installation instruc-
   tions with each pair
                                                                               PART            FITS
                                                                              NUMBER
                                        PART                                   11701           Moen*
                                       NUMBER                                  11702        Price Pfister
                                        1250                                   11703           Gerber


Crumb Cup Strainer                                 Replacement Strainers
 • Chrome plated brass                              Snap-in
 • #1341 - 1-7/8” x 1”                              stainless steel
 • #1344 - 1-1/4” x 11/16”



                                                                       PART      STRAINER         FITS
                        PART                                          NUMBER       SIZE
                                    FITS
                       NUMBER                                          1205         3”          2” DWV
                        1341        Sink                               1206         4”          3” DWV
                        1344  Lavatory less post                       1207         5”          4” DWV



Deep Basin Rosette                                 Flat Basin Rosette
 • Stamped steel                                    • Stamped steel

                                        PART                                                    PART
                                       NUMBER                                                  NUMBER
                                        1266                                                    1268



Faucet Hole Covers                                 Snap-In Faucet Hole Cover
                                                    • Chrome plated
                                                    • Fits 1-1/2” hole


                              PART      SIZE        Holes in china or stainless steel
                             NUMBER
                                                                                                PART
                              1274        2”        fixtures vary in diameter. This cover      NUMBER
                                                    fits most but not all manufacturers
                              1275      1-3/4”                                                  1279
                                                    Made in U.S.A.




B-30
                                                              Plumbing Specialties



Lavatory Hanger
 For Iron Lavatories
 • Cast iron                                        10-1/2”

 • 10-1/2” Wide
 • Extra heavy cast iron                                                   PART
                                                                          NUMBER
                                                                           1219



Lavatory Hanger
 For China Lavatories
 • Stamped steel
 • Supplied in pairs
                                                                           PART
                                                                          NUMBER
                                                                           1220
         Made in U.S.A.




“Z” Hanger
 Adjustable For Enameled Iron or China Lavatories
 • For iron, side lugs fit the pockets
 • For china, knock off the side lugs
 • 5” to 16” adjustment
 • Cast iron                                                               PART
                                                                          NUMBER
                                                                           1221



Lavatory Hanger
 For China Lavatories
 • Stamped steel
 • Plated for corrosion resistance
 • 8” wide
                                                                           PART
                                                                          NUMBER
                                                                           1222
         Made in U.S.A.




Amstan Style Lavatory Hanger
 Designed to fit
 Amstan Style Lavatories
 • Stamped steel
 • Plated for corrosion resistance
 • 10-1/2” wide                                                            PART
                                                                          NUMBER
                                                                           1223
         Made in U.S.A.




                                                                              B-31
Plumbing Specialties



Tub Spouts
 • Chrome plated brass or die cast
 • 5-5/8” Length




                                       PART
                                      NUMBER MATERIAL       FINISH    MOUNT               FPT
                                        1115   Brass       Chrome          Front          1/2”
                                        1126   Brass       Chrome          Back        1/2” - 3/4”
                                        1134  Die Cast     Chrome          Front          1/2”



Diverter Spouts, Front Lift
 • Chrome plated brass or die cast
 • 5-5/8” Length
 • Front mount




                                               PART
                                              NUMBER MATERIAL         FINISH              FPT
                                                1117   Brass          Chrome              1/2”
                                                1128  Die Cast        Chrome              1/2”




Adjustable Tub and Diverter Spouts
 Copper or IPS
 • Chrome plated die cast
 • 5-5/8” Length




                                      PART    FINISH   ADJUST. DIVERTER             PIPE SIZE
                                     NUMBER
                                       1136   Chrome    2-1/4”       No              1/2” CWT
                                       1142   Chrome    2-1/4”       Yes             1/2” CWT
                                       1143   Chrome      1”         No            1/2” - 3/4” IPS
                                       1144   Chrome      1”         Yes           1/2” - 3/4” IPS



B-32
                                                                   Plumbing Specialties



Diverter Spouts, Back Lift
 • Chrome plated brass or die cast
 • 5-5/8” Length
 • Back mount

                                                                    PART
                                                                   NUMBER MATERIAL     FPT
                                                                     1127   Brass      1/2”
                                                                     1129   Brass      3/4”
                                                                     1137  Die Cast    1/2”
                                                                     1138  Die Cast    3/4”
                                                                     1140  Die Cast 1/2” - 3/4”




7” Long Diverter & Tub Spouts
 •   Available in four styles
 •   Chrome plated die cast
 •   Individually boxed
 •   Diverters are front lift
 •   IPS are front mount
 •   CWT are slip fit




                                                                    PART                  PIPE
                                                                             DIVERTER
                                                                   NUMBER                 SIZE
                                                                    11287       Yes
                                                                                         1/2” IPS
                                                                    11347       No
                                                                    11367       No
                                     Available in polished brass                         1/2” CWT
                                        add “B” to part number      11427       Yes




Extensions for Tub & Diverter Spouts
 Chrome Plated
 • Spouts not included




                                                                      PART      FINISH   LENGTH
                                                                     NUMBER
                                                                       1155    Chrome      3”
                                                                       1156    Chrome      3”
            Made in U.S.A.




                                                                                             B-33
Plumbing Specialties



Fiberflass Shower Arm Ell
 This brass ell securely mounts a shower arm to
 a fiberglass shower stall. Also can be used to
 secure a tub spout nipple. Can be used with
 copper, iron pipe or compression fittings.
 Prevents movement of shower arm and
 tub spout.

 •   Locknuts secure ell to fiberglass wall
 •   Requires 1-1/32” hole through fiberglass
 •   Outlet end 1/2” FIP
 •   Inlet end 1/2” CWT or 1/2” MPT
                                                                                             PART
                                                                                            NUMBER
                                                                                              1195




Bathcock Coupling                                    Solid Brass Twin Ell
 • 1/2” MPT                                           For use with Diverter Spouts
 • Satin finish brass
 • Sold by the pair




                                             PART             PART                 SIZE NPT
                                            NUMBER           NUMBER     SPOUT         IN    SHOWER
                                             1793              1145      3/4”        1/2”     1/2”



                                                     Bath Supplies for 4 Leg
Diverter Spout                                       or Old Style Bath Tubs
 For Hand Held Shower                                 2 Styles With Nuts and Washers
 • Chrome plated die cast
 • 1/2” male hose adapter
   included for hand shower hose
                                                                        1/2” Chrome plated copper
 • 1/2”-3/4” IPS Back mount
                                                                           PART        DESCRIPTION
                                                                          NUMBER
                                                                           1792       90° Single Bend
                                                                                     for 3-3/8” Centers
                                                                           17925       Offset Bend for
                                                                                         3-3/8” to 4”
                                                                                           Centers
                                                                            1794         KIT ONLY
               PART                      PROTUSION                                     2 each of nuts,
                              FIP
              NUMBER                     FROM WALL                                    cone washers &
                1133      1/2” or 3/4”      5-1/8”                                      friction rings



B-34
                                                                           Plumbing Specialties



                              Shower Valve Rebuild Kits
 For the most popular brands. These conveniently packed kits contain all parts needed to rebuild shower valves.


Price Pfister Verve®
 •   3 Handle Valve w/ Diverter
 •   Sold complete as shown
 •   Seats included
 •   Parts not sold separately
                                                                                   PART       DESCRIPTION
                                                                                  NUMBER
                                                                                   28314        Two Handle
                                                                                   28315       Three Handle



Sayco®
 •   3 Handle Valve w/ Diverter
 •   Sold complete as shown
 •   Seats included
 •   Parts not sold separately


                                                                                                     PART
                                                                                                    NUMBER
                                                                                                     28317



American Standard - Colony®
 •   3 Handle Valve w/ Diverter
 •   Sold complete as shown
 •   Seats included
 •   Parts not sold separately
                                                                                   PART       STEM LENGTH
                                                                                  NUMBER
                                                                                   28310           Short
                                                                                   28311           Long



American Standard - Aquaseal®
 •   3 Handle Valve w/ Diverter
 •   Sold complete as shown
 •   Seats included
 •   Parts not sold separately


                                                                                                     PART
                                                                                                    NUMBER
                                                                                                     28312



                                                                                                           B-35
Plumbing Specialties



                                      Shower Valve Rebuild Kits
 For the most popular brands. These conveniently packed kits contain all parts needed to rebuild shower valves.


Gerber®
 •   3 Handle Valve w/ Diverter
 •   Sold complete as shown
 •   Seats included
 •   Parts not sold separately
                                                                                                                  PART             DESCRIPTION
                                                                                                                 NUMBER
                                                                                                                  28319               Canopy
                                                                                                                  28320             Cross (not shown)



Sterling®
 •   3 Handle Valve w/ Diverter
 •   Sold complete as shown
 •   Seats included
 •   Parts not sold separately


                                                                                                                                            PART
                                                                                                                                           NUMBER
                                                                                                                                            28318



Kohler®
 •   2 Handle Valve
 •   Sold complete as shown
 •   Seats included
 •   Parts not sold separately
                                                                                                                                            PART
                                                                                                                                           NUMBER
                                                                                                                                            28321



Central Brass®
 •   3 Valve Diverter
 •   Sold complete as shown
 •   Seats included
 •   Parts not sold separately


                                                                                                                                            PART
                                                                                                                                           NUMBER
                                                                                                                                            28322

          NOTE: Please do not confuse PASCO Specialty & Mfg., Inc. with these companies. PASCO is an independent manufacturing redistributor of
           quality plumbing specialty products, which, although may not be manufactured by the original product manufacturer, are precision made.



B-36
                                                                          Plumbing Specialties



Simply The Best
Shower Head                                              Economy Shower Head
•   1/2” FPT                                             •   1/2” FPT
•   Easily adjusts from fine to peppery spray            •   1.5 GPM @ 70 PSI
•   Chrome plated brass ball joint                       •   Chrome plated plastic
•   Vandal resistant                                     •   Adjustable
•   #1167 - 2.5 GPM @ 70 PSI
•   #1167RF - 1.5 GPM @ 70 PSI
•   Removable filter screen prevents clogging of spray



                                            PART
                                           NUMBER                                                  PART
                                             1167                                                 NUMBER
                                            1167RF                                                1189-RF



Shower Arm Shut Off                                      High Rise Shower Arm
 • 1/2” MPT x 1/2” FPT                                    • Increases height of any shower head
 • Chrome plated brass                                    • Chrome plated brass
                                                          • 1/2” IPS




     *Shower head will still
     dribble after shut off to
     prevent back flow.

                                                          Sold less shower head
                                                                                      PART
                                                          and flange.                             HEIGHT
                                            PART                                     NUMBER
                                           NUMBER                                      1190         10”
                                             1168                                      1191          8”



Shower Arms
 • Chrome plated brass
 • 1/2” IPS - Heavy wall thickness
                                                                                      PART        HEIGHT
                                                                                     NUMBER
                                                                                       1185          6”
                                                                                       1186          8”
                                                                                       1193         10”



                                                                                                      B-37
Plumbing Specialties



                                                     Face Bushings - IPS and CWT
Shower Arm Flanges                                   (Solder Type)




                                                        PART
                                                       NUMBER MATERIAL         SIZE
                                                         1139  Plastic    3/4” x 1/2” IPS
                                                         1141   Brass     3/4” x 1/2” IPS
                 PART      FLANGE                        1146   Brass     1/2” x 3/8” IPS
                                         FINISH
                NUMBER      STYLE                       1317    Brass  1/2” IPS x 1/2” CWT
                  1182     Sure Grip    CP Steel         1318   Brass  3/4” IPS x 3/4” CWT
                  1187     Set Screw   CP Die Cast       1319   Brass    1” IPS x 1” CWT



Diverter Spouts Lift Replacement
 Fits Spouts:
 1128, 1134, 1136, 11287, 11427
 1142, 1143 & 1144
 •   Brass lift
 •   Rubber washer
 •   Plastic slide
 •   Installs in seconds                                                                   PART
                                                                                          NUMBER
                                                                                            1109




Adjustable Shower Arm
 • 1/2” MPT x 1/2” FPT
 • 10” Length                                               Locking wingnuts allow
 • Chrome plated brass                                      any height adjustment.




                                                                     PART            DESCRIPTION
                                                                    NUMBER
                                                                      1192      Shower arm LESS
                                                                                  shower head
                                                                     1192-RK    Washers and Gas-
                                                                                     kets



B-38
                                                      Plumbing Specialties



Add-A-Shower:
Over the Rim
 • Chrome plated die cast spout
 • 1/2” IPS




                                                     PART               DESCRIPTION
                                                    NUMBER
                                                     2825          Over the rim supplied
                                                                    complete as shown
                                                   Replacement Parts
                                                      2831          Spout ONLY
                                                      1246          Wall Bracket
                                                     2836-3  3/8” x 60” CP Brass Riser
                                                    1189-RF Shower Head w/Bushing




Add-A-Shower: Regular Style           Add-A-Shower: Non-Siphon
 • Chrome plated brass bathcock        • Complies with UPC
 • Specifically for 4 leg bathtubs     • Spout rises above rim of tub




                                      *Complies with UPC
   PART                                  PART
                DESCRIPTION                          DESCRIPTION
  NUMBER                                NUMBER
                Regular style bath-                  Non-Siphon bath-
     2826       cock 3-3/8” centers       2827*     cock 3-3/8” centers
               supplied complete as                supplied complete as
                      shown                               shown

 Replacement Parts                     Replacement Parts
    2832      Bathcock ONLY               2833      Bathcock ONLY
    1247    Wall Bracket w/Rod            1247    Wall Bracket w/Rod
   2836-3      3/8” x 60” CP             2836-3      3/8” x 60” CP
                   Brass Riser                          Brass Riser
   1189-RF       Shower Head w/         1189-RF        Shower Head
                     Bushing                             w/Bushing
    1258       Rod-to-Riser Adapter       1258      Rod-to-Riser Adapter
   2837-C           Cold Stem            2837-C          Cold Stem
   2837-H           Hot Stem             2837-H          Hot Stem
    2837       Bathcock Seats-Pair        2838      Bathcock Seats-Pair
    2839           Hot & Cold             2839          Hot & Cold
                   Handle Set                           Handle Set



                                                                                      B-39
Plumbing Specialties



Straight Shower Rods
 • 1” Diameter                            PART      ROD         DESCRIPTION
                                         NUMBER    LENGTH
                                           1260      60”       Polished Aluminum
                                           1261      72”         LESS Flange
                                           1282      60”            CP Brass
                                           1283      72”         WITH Flange
                                         1282-PB     60”        Polished Brass
                                         1283-PB     72”         WITH Flange


Corner Shower Rods
 • 1” Diameter
 • Jumbo flanges
 • Individually boxed

                                          PART       ROD        DESCRIPTION
                                         NUMBER    LENGTH
                                          1262     60” x 27”      Polished
                                          1263     72” x 27”      Aluminum
                                          1284     60” x 27”    Chrome Plated
                                          1285     72” x 27”        Brass



“D” Style Shower Rods
 • 1” Diameter
 • Round flanges & 36” Ceiling support
 • Individually boxed                     PART       ROD        DESCRIPTION
                                         NUMBER    LENGTH
                                          1264     54” x 27”      Polished
                                          1265     60” x 27”      Aluminum
                                          1286     54” x 27”    Chrome Plated
                                          1287     60” x 27”        Brass



Rectangular Shower Rods
 •   1” Diameter
 •   1-36” Ceiling support
 •   1-10” Wall support
 •   Round flanges
                                          PART       ROD
 •   Individually boxed                  NUMBER    LENGTH       DESCRIPTION
                                          1271     48” x 27”      Polished
                                          1272     54” x 27”      Aluminum
                                          1288     48” x 27”    Chrome Plated
                                          1289     54” x 27”        Brass



B-40
                                                                           Plumbing Specialties



Ceiling Supports                                           Shower Curtain Pins
For 1” Shower Rods                                          Also Use For Valve ID Tags




       1259                             1245




    PART                     DESCRIPTION
   NUMBER
    1259            36” Fit-all ceiling support complete
                     Hinged ceiling support for angled
      1245                ceilings - fits 1259 rods
                         CP Brass, sold less rod                 PART           SIZE             MATERIAL
      1249                  Ceiling flange ONLY                 NUMBER
      1267                      1” Loop ONLY                      1188               #3       Nickel Plated Steel



Flanges                                                    Add-A-Shower Riser Brackets
For 1” Shower Rods
                                          1258                                                   1246
                                                                                                 Fits 3/8” Riser
                                                                                                 #2825
                                                                   1247
                1248                                               Fits 3/8” Riser
                Fits ID                                            #2826
                                   1254           1256
           2”




                                                                                                1258
  4-1/2”
    5”




                                          1253
                1257


                                                                           Fits 1” Shower Rod          Fits 3/8” Riser
   PART                      DESCRIPTION
  NUMBER
   1248             Hinged wall CP brass with screws           PART                       DESCRIPTION
   1253                  Adjustable CP plastic                NUMBER
   1254                 With set screw CP steel                1246           Fixed wall brackets for risers
   1256                    Sure grip CP steel                  1247                Brackets for risers
   1257                   Jumbo CP die cast                    1258               Rod to riser coupling
   1258                  Riser to Rod Support                  1269          Rod Coupling for 1264 & 1265



                                                                                                                B-41
Plumbing Specialties



Quick Valve Plate
 Stainless Steel Shower Valve Cover Plate                                    Stainless Steel
 Old ceramic tile is impossible to match.                               PART            HOLE SIZE OR
 The Quick Valve Plate covers the unsightly hole                       NUMBER HOLES       CENTERS
 left in the tile after the shower valve is replaced.                    815     1             5”
                                                                         816     2
 • Screws & brackets provided                                                             8” Centers
                                                                         817     3
 • Polished stainless steel
   not affected by                                                       818     1           3-1/2”
   household cleaners                                                    819     1           4-1/2”
 • 13” long X 7-1/4” wide                                                820     0         no holes
                                                                             Polished Brass Finish
                                                                        815-PB       1           5”
                                                                        816-PB       2       8” Centers



Overflow Plate - Chrome                                 Overflow Plate - Chrome
 With Trip Lever                                         • Covers 3-1/4” hole
 • Square handle                                         • 2” bolt hole centers
 • Covers 3-1/4” hole
 • 2” bolt hole
   centers




                                  PART        W/1148                                     PART      W/1148
                                 NUMBER       BOLTS                                     NUMBER     BOLTS
                                   1150        None                                       1154      None
                                   1157         2                                         1160       2



Overflow Plate - Chrome                                 Overflow Plate Bolt - Chrome
 • Covers 3-1/4” hole                                    For trip lever and overflow face plates




                                                                                   PART
                                  PART        W/1148                              NUMBER SIZE/LENGTH
                                 NUMBER       BOLTS                                 1147 1/4” x 20 x 2-1/2”
                                   1152        None                                 1148 1/4” x 20 x 1-1/2”
                                   1159         1                                   1149 1148 - 2 per bag



B-42
                                                          Plumbing Specialties



Tub Strainer                            Overflow Strainer
 Three Prong                             For 4 leg tubs
 • Stainless steel                       • 3” Diameter
                                         • CP Brass




                      PART
                     NUMBER DIAMETER                                         PART
                      1342    1-7/8”                                        NUMBER
                      1343    1-5/8”                                         1357




                                        Bath Tub Waste
Bead Chain                              Shoe & Strainer
 • CP Brass                              • Brass
                                         • 22 Gauge tube
                                         • Price Pfister style




                       PART   REEL
                      NUMBER LENGTH          PART             DESCRIPTION
                        1124  250 ft.      NUMBER
                                             1372        1-1/2” Brass Waste Shoe
                                             1373        1-3/8” Brass Waste Shoe
                                             1374   16 Thread Tub Drain Body w/Cross
                                            1374-W          Tub Drain Washer
                                             1376     Stainless Steel Strainer w/Bolt
                       PART    CHAIN         1377    CP Brass Bolt for Strainer ONLY
                      NUMBER    SIZE         1380  1-1/2” Brass Waste Shoe - Complete
                        1130    # 10         1381  1-3/8” Brass Waste Shoe - Complete



                                                                                 B-43
Brass Tubular



                                                    P Traps
                                    All 17 gauge P Traps have CP brass nuts.
                                   All 20 gauge P Traps have CP die cast nuts.


Less Cleanout - 8” Wall Bend - Chrome
 • Beaded with slip joint washers or ground joint                             PART      SIZE           GAUGE
                                                                            NUMBER
 Add 15 to part number for 15” wall bend                                      34100     1-1/4”
 Add BF for box flanges                                                     * 34102 1-1/2” x 1-1/4”     20
                                                                              34104     1-1/2”
                                                                              34106     1-1/4”
                                                                            * 34108 1-1/2” x 1-1/4”     17
                                                                              34110     1-1/2”

                                                                            Rough Brass
                                                                              34105       1-1/2”        20
                                                                              34107       1-1/2”        17

                                                                          Ground Joint - Chrome
                                                                            34109   1-1/2” x 1-1/4”
                                                      30 pieces per case                                17
                                                            *Choked inlet   34111        1-1/2”




With Cleanout - 8” Wall Bend - Chrome
 • Beaded with slip joint washers or ground joint

 Add 15 to part number for 15” wall bend                                      PART      SIZE           GAUGE
 Add BF for box flanges                                                     NUMBER
                                                                              34116     1-1/4”
                                                                            * 34118 1-1/2” x 1-1/4”     20
                                                                              34120     1-1/2”
                                                                              34122     1-1/4”
                                                                            * 34124 1-1/2” x 1-1/4”     17
                                                                              34126     1-1/2”
                                                                            Ground Joint - Chrome
                                                      30 pieces per case
                                                            *Choked inlet     34129        1-1/2”       17



Wall Bend for P Trap - Chrome
                                                                             PART          SIZE        GAUGE
                                                                            NUMBER
                                                                             34128       1-1/4” x 8”
                                                                             34130       1-1/2” x 9”    20
                                                                             34132      1-1/2” x 15”
                                                                             34136       1-1/2” x 9”
                                                                                                        17
                                                                             34138      1-1/2” x 15”



B-44
                                                                                 Brass Tubular



                                         Sink Traps
     All 17 gauge Sink Traps have CP Brass nuts. All 20 gauge Sink Traps have CP Die Cast nuts.


Sink Traps with Cast Brass Outlet Elbow - Chrome

                                                          PART                                    CASE
                                                                        SIZE       GAUGE
                                                         NUMBER                                    QTY
                                                          34172         1-1/4”                      40
                                                                                      20
                                                          34174         1-1/2”                      40
                                                          34176         1-1/4”                      40
                                                                                      17
                                                          34178         1-1/2”                      30
                                                        IPS cast elbow ONLY
                                                          34141        1-1/2”



J Bends for Sink Traps                                Sink Trap w/PVC Connection
with Captured Nut - Chrome                            Cast Brass Outlet Elbow
                                                        • Chrome
                                                          trap and
                                                          cover tube
                                                        • PVC
                   50 pieces per case                     Connection
                      PART                              • 20 Gauge
                    NUMBER SIZE          GAUGE
                                                          Trap           PART                     CASE
                                                                                 SIZE
                      34182     1-1/2”     20                           NUMBER                     QTY
                      34186     1-1/2”     17                            34145 1-1/2” x 5”          30



J Bends for P Traps - Chrome
                                                                  Without Cleanout *Reducing Washer
                                                                     PART        SIZE         GAUGE
                                                                   NUMBER
                                                                     34188       1-1/4”
                                                                     34190       1-1/2”          20
                                                                   *
                                                                     34191   1-1/2” x 1-1/4”
                                                                     34192       1-1/4”
                                                                   *
                                                                     34193   1-1/2” x 1-1/4”     17
                                                                     34194       1-1/2”
                                                                   Low Inlet
                                                                     34197        1-1/2”           17
                                                                  Choked Inlet
                                                                    34201    1-1/2” x 1-1/4”       20
                                                                    34205    1-1/2” x 1-1/4”       17
                                                                  High Inlet †
                                             50 pieces per case     34209         1-1/4”           17
                                           † 30 pieces per case      34211        1-1/2”           17



                                                                                                    B-45
Brass Tubular



Los Angeles Code Sink Trap
Cast Brass Elbow - Ground Joint
 • Brass nuts and 1-1/2” x 1-1/4” reducing washer
                                                               Complete
                                                                 PART        SIZE         FINISH      GAUGE
                                                                NUMBER
                                                                 34140       1-1/2”       Chrome
                                                                                                         17
                                                                 34142       1-1/2”       Rough
                                                               “J” bend ONLY for LA trap
                                                                 34137      1-1/2”      Chrome           17
                                                                 34139      1-1/2”       Rough

                                                                PART                  DESCRIPTION
                                                               NUMBER
                                          50 pieces per case    34140         1-1/2” CP outlet blbow ONLY




S Traps with Flanges - Less Cleanout - Chrome
 To receive with deep box flange, add “BF” to part number.
 • All 17 gauge traps have CP brass nuts.
 • All 20 gauge traps have CP die cast nuts.




                                                                PART                       TRAP        CASE
                                                                              SIZE
                                                               NUMBER                     GAUGE         QTY
                                                                34144      1-1/4” x 20”                  24
                                                                                             20
                                                                34146      1-1/2” x 20”                  20
                                                                34148      1-1/4” x 20”                  20
                                                                                             17
                                                                34150      1-1/2” x 20”                  18




Cast Tees with Tailpieces - Nuts & Washers - 1-1/2” Chrome


                                                                      Add RB to part number for Rough Brass
                                                               PART                       SIZE
                                                              NUMBER
                                                               34312          1-1/2” CP outlet blbow ONLY
                                                               34314        1-1/2” Rough outlet elbow ONLY
                                                               34316           Center outlet tee no baffle
                             34316                             34318            Center outlet tee w/ baffle
    34314       34320                      34312
                             34318                             34320             3 Way slip tee no baffle
                                           50 pieces per case  34322        1-1/2” Hiway insert tailpiece TOE




B-46
                                                                                          Brass Tubular



                                 Continuous Wastes
                           All 17 gauge Slip Joint Cast Tee’s have CP Brass nuts.
                          All 20 gauge Slip Joint Cast Tee’s have CP Die Cast nuts.


Continuous Waste - End Outlet, Slip Joint Cast Tee
 • With Baffle - Chrome                                          PART
 *Los Angeles Code Compliant                                   NUMBER         SIZE           FINISH      GAUGE
                                                                 34160     1-1/2” x 16”      Chrome
                                                                 34162     1-1/2” x 21”      Chrome       20
                                                                 34164     1-1/2” x 16”      Rough
                                                                 34167     1-1/2” x 16”      Rough
                                                                 34168     1-1/2” x 16”      Chrome       17
                                                               * 34169     1-1/2” x 16”      Chrome
                                         30 pieces per case      34170     1-1/2” x 21”      Chrome



Continuous Waste - End Outlet, Direct Connect Cast Tee
 • With Baffle - Chrome

                                                                           PART              SIZE        GAUGE
                                                                          NUMBER
                                                                           34286          1-1/2” x 16”    20
                                                                           34290          1-1/2” x 16”
                                                              30 pieces                                   17
                                                               per case    34292          1-1/2” x 21”




Continuous Waste - Center Outlet, Slip Joint Cast Tee
 • With Baffle - Chrome

                                                                PART                                     CASE
                                                                              SIZE           GAUGE
                                                               NUMBER                                    QTY
                                                                34294      1-1/2” x 16”         20        24
                                                                34298      1-1/2” x 16”                   20
                                                                                                17
                                                                34300      1-1/2 x” 21”                   20



Continuous Waste - Center Outlet, Direct Connect Cast Tee
 • With Baffle - Chrome


                                                                PART                                     CASE
                                                                              SIZE           GAUGE
                                                               NUMBER                                    QTY
                                                                34302      1-1/2” x 16”         20        24
                                                                34306      1-1/2” x 16”         17        20



                                                                                                            B-47
Brass Tubular



                                  Waste Arms
                       All 17 gauge Waste Arms have CP Brass nuts.
                      All 20 gauge Waste Arms have CP Die Cast nuts.


1-1/2” Waste Arms - Slip Joint
 • Rough and Chrome                                           PART    SIZE      FINISH   GAUGE
                                                             NUMBER
                                                              34204      7”
                                                              34206   11-1/2”
                                                              34208     15”     Chrome    20
                                                              34210     20”
                                                              34212     24”
                                                              34216      7”
                                                              34218   11-1/2”
                                                              34220     15”     Rough     20
                                                              34222     20”
                                                              34224     24”
                                                              34226      7”
                                                              34228   11-1/2”
                                                              34230     15”     Chrome    17
                                                              34232     20”
                        7”        60   pieces   per   case              24”
                                                              34234
                        11-1/2”   50   pieces   per   case
                                                              34238   11-1/2”
                        15”       40   pieces   per   case
                        20”       30   pieces   per   case    34240     15”     Rough     17
                        24”       24   pieces   per   case    34244     24”




1-1/2” Waste Arms - Slip Joint
 • Rough and Chrome                                           PART    SIZE      FINISH   GAUGE
                                                             NUMBER
                                                              34246      7”
                                                              34248   11-1/2”
                                                              34250     15”     Chrome    20
                                                              34252     20”
                                                              34254     24”
                                                              34256      7”
                                                              34262     20”     Rough     20
                                                              34264     24”
                                                              34266      7”
                        7”        60   pieces   per   case
                                                              34270     15”     Chrome    17
                        11-1/2”   30   pieces   per   case
                                                              34274     24”
                        15”       40   pieces   per   case
                                                              34276      7”
                        20”       30   pieces   per   case                      Rough     17
                        24”       24   pieces   per   case    34278   11-1/2”




B-48
                                                                                              Brass Tubular



Sink Tailpieces - Flanged One End
 • Rough and Chrome                                              PART
                                                                NUMBER LENGTH DIAMETER          FINISH   GAUGE
                                                                 34326    6”
                                                                 34328    8”    1-1/4”         Chrome     20
                                                                 34330   12”
                                                                 34332    4”
                                                                 34334    6”
                                                                                 1-1/2”        Chrome     20
                                                                 34336    8”
                                                                 34338   12”
                                                                 34340    4”
                                                                 34342    6”
                                                                                 1-1/2”         Rough     20
                                                                 34344    8”
                                                                 34346   12”
                                                                 34348    4”
                                                                 34350    6”
                                                                                 1-1/2”        Chrome     17
                                                                 34352    8”
                                                                 34354   12”
                                                                 34356    4”
                              4”    80   pieces   per   case
                                                                 34358    6”
                              6”    60   pieces   per   case                     1-1/2”         Rough     17
                                                                 34360    8”
                              8”    60   pieces   per   case
                              12”   50   pieces   per   case     34362   12”




Sink Tailpieces - Double End Flanged
 • 1-1/2” - Chrome


                                                                                          PART
                                                                                        NUMBER LENGTH    GAUGE
                                                                                          34364  12”
                                                                                          34366  16”      20
                                                               12” 50 pieces per case
                                                                                        * 34367  16”
                                                               16” 40 pieces per case
                                                               * Rough Brass              34388  16”      17



Sink Tailpieces - Reducing
 • 1-1/2” x 1-1/4” - Chrome




                                                                                         PART
                                                                                        NUMBER LENGTH    GAUGE
                                                                                         34390            20
                                                                                                  8”
                                                                   60 pieces per case    34392            17



                                                                                                           B-49
Brass Tubular


Extension Tube - Slip Joint
 • Double End - Chrome
 • With CP die cast nuts
 • 40 Pieces per case




                                                                               PART     SIZE      GAUGE
                                                                              NUMBER
                                                                               34394 1-1/4” x 16”  20
                                                         40 pieces per case    34396 1-1/2” x 16”




Extensions Tubes - Slip Joint, With Nuts & Washers
 • All 17 gauge Slip Joint Extension Tubes have CP brass nuts
 • All 20 gauge Slip Joint Extension Tubes have CP die cast nuts


                                                         PART
                                                        NUMBER LENGTH          FINISH   GAUGE   FINISH
                                                         34398    6”
                                                         34400    8”            1-1/4    20     Chrome
                                                         34402   12”
                                                         34404    6”
                                                         34406    8”            1-1/4    17     Chrome
                                                         34408   12”
                                                         34410    6”
                                                         34412    8”           1-1/2”    20     Chrome
                                                         34414   12”
                                                         34416    6”

                              6” 80 pieces per case      34418    8”           1-1/2”    17     Chrome
                              8” 60 pieces per case      34420   12”
                              12” 50 pieces per case     34422   12”           1-1/2”    17     Rough




B-50
                                                                                  Brass Tubular



Extension Tubes - Threaded Both Ends
 • Rough and Chrome
                                                      PART
                                                     NUMBER LENGTH DIAMETER        FINISH   GAUGE
                                                      34448    6”
                                                      34450    8”    1-1/4”        Chrome     20
                                                      34452   12”
                                                      34456    8”
                                                                     1-1/4”        Rough      20
                                                      34458   12”
                                                      34460    6”
                                                      34461    6”
                                                                      1-1/4”       Chrome     17
                                                      34462*   8”
                                                      34464   12”
                                                      34467  3-3/4”
                           * Extension tube -         34468    6”
                                                                      1-1/2”       Chrome     20
                             threaded one end         34470    8”
                             - ( TOE )                34472   12”
                                                      34474    6”
                                                      34476    8”    1-1/2”        Rough      20
                                                      34478   12”
                            6” 80 pieces per case
                            8” 60 pieces per case     34480   12”    1-1/2”        Chrome     17
                            12” 50 pieces per case    34482   12”    1-1/2”        Rough      17



Repair Couplings & Ells
 • Chrome - With CP die cast nuts
                                                                       PART
                                                                      NUMBER DESCRIPTION     SIZE
                                                                       34518    Straight
                                                                       34520      90°        1-1/4
                                                                       34522      45°
                                                                       34524    Straight
                                                                       34526      90°        1-1/2
                                                 25 pieces per case    34528      45°




Double Offset 12”
 • With die cast nuts




                                                                  PART
                                                                 NUMBER LENGTH     GAUGE    FINISH
                                                                  34530  1-1/4”             Chrome
                                                                  34532  1-1/2”     20      Chrome
                                            24 pieces per case    34534  1-1/2”             Rough



                                                                                                   B-51
Brass Tubular


Slip Joint Chrome Repair Traps
 • Less Cleanout                                                               PART
                                                                              NUMBER LENGTH             GAUGE
                                                                               34484  1-1/4”
                                                                                                          20
                                                                               34486  1-1/2”

                                                                             Replacement elbow ONLY
                                                                               34488     1-1/4”
                                                                                                   20
                                                                               34490     1-1/2”



Slip Joint Elbows
 • With CP die cast nuts
                                                       PART
                                                      NUMBER LENGTH DIAMETER GAUGE                      FINISH
                                                       34492    4”
                                                       34496    8”    1-1/2”   20                       Chrome
                                                       34498   12”



Closet Ells
 • With CP die cast nuts

                                                                   PART        SIZE        GAUGE        FINISH
                                                                  NUMBER
                                                                   34512    2” x 4” x 6”
                                                                   34514    2” x 5” x 7”      20        Chrome
                                                                   34516    2” x 6” x 8”
                                                    * Two-Piece
                                                       Repair Ell  34517 * 2” x 3” x 10”




Branch Tailpieces
 • Branch for 5/8” and 7/8” dishwasher drain hose




                                    PART  BRANCH                                                      TAILPIECE
                                                    SIZE     GAUGE                  STYLE
                                   NUMBER OUTLET                                                        FINISH
                                    34540   7/8”                               Chrome Plated Brass     Chrome
                                                 1-1/2” X 8”   17                  Nut Captive
                                    34541   5/8”                                                        Plated
                                    34542   7/8”                              Chrome Plated Diecast     Rough
                                                 1-1/2” X 8”   20              Nut Slip Joint Down
                                    34543   5/8”                                                         Brass
                                    34544   7/8”                              Chrome Plated Diecast    Chrome
                                                 1-1/2” X 8”   20
                                    34545   5/8”                               Nut Slip Joint Down      Plated



B-52
                                                                                       Brass Tubular



Cast Swivel Trap -
Cleanout - Brass Nuts                                 Disposal Kit - 13” Center to End
 •   Chrome                                                       •   Chrome
 •   IPS Elbow                                                    •   With baffle tee
 •   Ground Joint                                                 •   17 gauge with CP brass nuts
 •   LA Code                                                      •   20 gauge with CP die cast nuts




                                                                               PART
                                                                              NUMBER LENGTH            GAUGE
                     PART    SIZE        GAUGE                                        1-1/2”
        25 pieces   NUMBER                                      30 pieces      34546                    20
         per case    34570   1-1/2”        17                    per case      34548  1-1/2”            17



Semi-Cast Traps - Cleanout - Brass Nuts
 • Chrome                                   With Shallow Flange                With Box Flange
 • 9” Wall Bend
                                              PART                               PART
                                                         SIZE   GAUGE                       SIZE       GAUGE
                                            NUMBER                             NUMBER
                                              34550      1-1/4”                  34556      1-1/4”
                                                                  17                                     17
                                              34554      1-1/2”                  34558      1-1/2”

                                                                               With Ground Joint
                                                                                 34560     1-1/4”
                                                                                                         17
                                           20 pieces per case                    34562     1-1/2”



Commercial Grid Style                                 Handicap Commercial
Lavatory Drain                                        Grid Style Lavatory Drain
 Highest Quality                                        Highest Quality
 • #1175 & 1179 Chrome plated brass body                • Chrome plated brass body
 • #1176 Stainless steel body                           • 1-1/4” x 9” Stainless steel tailpiece
 • 1-1/4” Stainless steel tailpiece                     • Brass locknut
 • Brass locknut                                        • Rubber gasket with overflow
 • Rubber gasket with overflow




                              Individually Boxed
                                 * Most Popular
                        PART          TAILPIECE
                       NUMBER          LENGTH                                      PART
                         1175             4”                                      NUMBER DESCRIPTION
                        1176*             6”                                      1177-TP With Tailpiece
                         1179            12”                                        1177  Elbow ONLY




                                                                                                         B-53
Plumbing Specialties



Flexible PVC Tubular Trap
 • There’s no faster, easier way to replace
   1-1/4” or 1-1/2” plastic or metal drain
   traps. It’s flexible PVC material adjusts
   to pipe misalignment and in installs
   quickly and securely with a common
   screwdriver or nutdriver.
 • Stainless steel clamps
                                                PART         DRAIN SIZE
                                               NUMBER
                                                5900    1-1/4” or 1-1/2” to 1-1/2”




Flexible PVC Trap Adapters
 • Trap connectors are ideal for new
   installation, repairs and alterations.
 • The 5915 size connects 1-1/4” or
   1-1/2” tubular traps to all common
   1-1/4” or 1-1/2” drain piping.
 • The 5925 size connects 1-1/4” or
   1-1/2” tubular traps to all common 2”
   drain piping, except copper. (For 2”         PART         DRAIN SIZE
   copper, use 5915)                           NUMBER
 • Stainless steel clamps                       5915        1-1/4” and 1-1/2”
                                                5925      1-1/4” or 1-1/2” to 2”



Flexible PVC Tubular Drain Pipe Connector
 • For any combination of 1-1/2” or 1-1/4”
   tubular drain pipe.
 • Stainless steel clamps




                                                PART         DRAIN SIZE
                                               NUMBER
                                                5905       1-1/4” and 1-1/2”



PVC Hose Grip Clothes Washer Connector
 • Holds washing machine hoses
   securely in their standpipe drains.
 • The Hose Grip has 4 vents to allow
   for air flow during discharge from
   washer.
 • Stainless steel clamp                                                PART
                                                                       NUMBER
                                                                        5930



B-54
                                                                    Plumbing Specialties



2” Quick Set Shower Drain
 For Fiberglass Shower Stalls
 • Internal locknut and gasket for 2” DWV
 • Chrome plated brass strainer
 • Brass body and locknut




                                                                                PART      PIPE
                                                                               NUMBER     SIZE
                                                                                7980       2”




Brass Utility Drain




                                                                                PART       IPS
                                                                               NUMBER
                                                                                 1170     1-1/2”
                                                                                 1171       2”




Plastic Shower Drain
 Clamping Ring Style
 • 4” diameter strainer
 • 2” IPS plastic tailpiece allows
   adjustment to desired level
 • Fits over 2” or inside 3”
   Schedule 40 DWV




                                                                                 TOP     BOTTOM
                                             PART               DRAIN
                                                   MATERIAL CONNECTION FLANGE            FLANGE
                                            NUMBER                           DIAMETER DIAMETER
                                             8015    PVC      2”-3” PVC
                                                                                5-1/4”    6-1/2”
                                             8016    ABS      2”-3” ABS
                                             8019            4” Stainless Steel Strainer


                                      See Page D-1 CAST IRON SPECIALTIES
                                           For Additional Shower Drains                      B-55
Plumbing Specialties



Sure Grip Flanges (or Shallow Flanges)
 • Box Quantities Only - 50 per box
                                                                Chrome Plated Steel
                                                                  PART                              OUTSIDE
                                                                                  IPS     CWT
                                                                 NUMBER                            DIAMETER
                                                                  1224          1-1/2” Tubular         3”
                                                                  1225         3/8”         —        2-1/2”
                                                                  1226         1/2”         —        2-1/2”
                                                                  1227         3/4”         —        2-1/2”
                                                                  1228        1-1/2”        —          3”
                                                                  1229          2”          —        3-1/4”
                                                                  1230          —          1/2”      2-1/2”
                                                                  1231          —          3/4”      2-1/2”
                                                                   1232       1-1/4”      1-1/2”       3”
                                                                  1233          1”          —        2-3/4”
                                                                  1240          —           2”       3-1/2”
                                                                   1241         —           1”       2-3/4”
                                                                   1244         1-1/4” Tubular         3”

                                                                Stainless Steel
                                                                 1226-SS       1/2”         —       2-1/2”
                                                                 1227-SS       3/4”         —       2-1/2”
                                                                 1228-SS      1-1/2”        —       3-1/2”
                                                                 1229-SS        2”          —       3-1/2”
                                                                 1230-SS        —          1/2”     2-1/2”
                                                                 1231-SS        —          3/4”     2-1/2”




White Plastic Sure Grip Flanges (or Shallow Flanges)
 • Low Cost
 • Corrosion-proof, indestructible, high-density polyethylene
 • Box Quantities Only - 50 per box



                                                       PART                                       OUTSIDE
                                                                    IPS           CWT    TUBULAR DIAMETER
                                                      NUMBER
                                                       1208          —            3/8”       —     2-1/4”
                                                       1209          —            1/2”       —     2-1/4”
                                                       1210          —            3/4”       —     2-1/4”
                                                        1211        3/8”           —         —     2-3/8”
                                                       1212         1/2”           —         —     2-3/8”
                                                       1213         3/4”           —         —     2-3/8”
                                                       1214        1-1/2”          —         —       3”
                                                       1215          2”            —         —     3-1/2”
                                                       1216          —             —       1-1/4”  2-7/8”
                                                       1217          —             —       1-1/2”  2-7/8”



B-56
                                                           Plumbing Specialties



Extra Wide Sure Grip Flanges
(or Shallow Flanges)                       Sure Grip Box Flanges
Chrome Plated Steel                         • Chrome Plated OR
• Box Quantities Only -                       Stainless Steel
  50 per box                                • Box Quantities Only -
                                              50 per box


                                                Chrome Plated Steel
                                                  PART                        OUTSIDE
                                                              IPS   TUBULAR DIAMETER
                                                 NUMBER
          PART               OUTSIDE               1234      1-1/4”     —        3”
         NUMBER IPS TUBULAR DIAMETER               1235      1-1/2”     —        3”
          1238  1-1/2” —      3-1/2”               1236        —      1-1/4”     3”
          1239    2”   —      3-1/2”               1237        —      1-1/2”     3”
          1240    —    2”     3-1/2”
                                                SPECIFY SUFFIX “SS” FOR STAINLESS STEEL



Sure Grip Bell Flanges (or Deep Flanges)
 Chrome Plated Steel                    PART                                   OUTSIDE
 • Box Quantities Only -                           IPS       CWT      TUBULAR DIAMETER
                                       NUMBER
   25 per box                           2841       3/8”       —           —     2-1/2”
                                        2842       1/2”       —           —     2-1/2”
                                        2844      1-1/4”      —           —       3”
                                        2845        —        1/2”         —     2-1/2”
                                        2846      1-1/2”      —           —       3”
                                        2848        —        3/8”         —     2-1/2”
                                        2853        —         —         1-1/4”    3”
                                        2854        —         —         1-1/2”    3”



Sure Grip Floor and Ceiling Plate
 Chrome Plated Steel                             PART                            OUTSIDE
 • Light pattern - no springs                   NUMBER       IPS       CWT      DIAMETER
                                                 2810        3/8”        —          3”
                                                  2811       1/2”        —        2-3/4”
                                                 2812        3/4”        —        2-3/4”
                                                 2813         1”         —        3-1/2”
                                                 2814       1-1/4”     1-1/2”     3-1/2”
                                                 2815       1-1/2”       —        3-1/2”
                                                 2816         2”         —        4-1/2”
                                                 2820         —         3/8”      2-3/4”
                                                 2821         —         1/2”        3”
                                                 2822         —         3/4”      2-3/4”
                                                  2823        —          1”       2-3/4”
                                                  2824        —        1-1/4”     3-1/2”



                                                                                     B-57
Plumbing Specialties



Plastic Floor and Ceiling Plate - Chrome Plated or White
 • Simply bend and place around pipe.       PART                       OUTSIDE
 • Chrome or white finish 100% Rustproof   NUMBER    IPS      CWT     DIAMETER
 • Non-corrosive                            2856     1/2”      —         2-3/4”
 • Non-breakable
                                            2857     3/4”      —           3”
 SPECIFY SUFFIX “W” FOR WHITE
                                            2858      1”       —         3-1/4”
                                            2859    1-1/4”     —         3-1/2”
                                            2860    1-1/2”     —         4-1/4”
                                            2861      2”       —         5-1/4”
                                            2862    2-1/2”     —         5-3/4”
                                            2863      3”       —         5-3/4”
                                            2864      4”       —         6-3/4”
                                            2865      5”       —         8-1/2”
                                            2866      6”       —         9-3/4”
                                            2868      8”       —        12-3/4”
                                            2873      —       1/2”       2-1/2”
                                            2874      —       3/4”       2-3/4”
                                             2875     —        1”          3”
                                             2876     —      1-1/4”      3-1/4”
                                             2877     —      1-1/2”      3-1/2”
                                             2878     —        2”        4-1/2”



Floor and Ceiling Plate
 Heavy Pattern With Springs - Hinged
                                            PART                       OUTSIDE
 • Chrome plated steel                     NUMBER    IPS     CWT      DIAMETER
                                            2880     3/8”      —        2-1/4”
                                            2881     1/2”      —        2-3/4”
                                            2882     3/4”      —        2-3/4”
                                            2883      1”       —        3-1/4”
                                            2884    1-1/4”     —        3-1/2”
                                            2885    1-1/2”     —          4”
                                            2886      2”       —        4-1/2”
                                            2888      —       1/2”      2-1/4”
                                            2889    2-1/2”     —        5-1/2”
                                            2890      3”       —          6”
                                            2891      —       3/4”      2-3/4”
                                             2892     4”       —        6-1/2”
                                             2893     —        1”       3-1/4”
                                             2894     —      1-1/4”     3-1/2”
                                             2895     —        2”       4-1/2”
                                             2896     —      1-1/2”       4”
                                             9860     5”       —          9”
                                             9861     6”       —        9-3/4”
                                             9862     8”       —         13”




B-58
                                                                   Plumbing Specialties



Plastic                                             Plastic
Dryer Vent Hood                                     Louvere Dryer Vent Hood
With 4” Aluminum Duct Pipe and Wall Flange          With 4” Aluminum Duct Pipe and Wall Flange
• Weather resistant                                 • Weather resistant
• Paintable                                         • Paintable
• Wide outlet                                       • Narrow profile
                                                    • Prevents drafts




                                            PART                                         PART
                                          NUMBER                                       NUMBER
                                           1718-W                                       1721-W




Vent Hood Kit
With Above Hood #1718-W
• 1- 4” x 5 ft. Vinyl or Aluminum Dryer Duct
• 2- #1724 Clamps                                                        PART     DESCRIPTION
                                                                        NUMBER
• 1- #1718-W Vent Hood
                                                                          1697       Aluminum
                                                                        1718-HK        Vinyl




Vinyl or Aluminum Dryer Duct                        Dryer Duct Clamp
                                                     Stainless Steel




      PART
     NUMBER MATERIAL                   SIZE
      1687                           4” x 5 ft.
      1688  Aluminum                  4” x 8 ft.                               PART       SIZE
       1689                          4” x 25 ft.                              NUMBER
       1720   Vinyl                  4” x 20 ft.                               1723        4”



                                                                                             B-59
Plumbing Specialties



Anchor Sets
 Phillips hex head screws allow a nutdriver, nut setter or
 screwdriver to be used.

 EACH SET CONTAINS:
 • 100 Anchors
 • 100 Phillips hex head screws
 • Carbide tipped masonry drill (optional)
 • Transparent, reusable box




                                                      PART    DRILL            SCREW      ANCHOR             STYLE
                                                     NUMBER INCLUDED            SIZE       SIZES
                                                      1598     3/16”           1” x #6      4-6               Collar
                                                      1600      1/4”           1” x #10     8 - 10
                                                       1604     1/4”           1” x #10    10 - 12          No Collar




Toggle Bolts                                                 Flat Head Woodscrews
 • 50 per box                                                 • “P” indicates phillips head
                                                              • 100 per box




                                                                    PART          SIZE        LENGTH       MATERIAL
                          PART                                     NUMBER
                                             SIZE
                         NUMBER                                     1503-P                     1-1/2”         Brass
                          1479          3/16” x 4”                  1504-P        #12          1-1/2”         Steel
                          1484          1/4” x 3”                   1505-P                       2”           Brass
                          1485          1/4” x 4”                    1531         #14          1-1/2”         Brass



All Thread Rod Coupling                                      Setting Tool
 • Plated steel                                               • Plated steel




                        PART                                                          PART
                                     SIZE                                                                  SIZE
                       NUMBER                                                        NUMBER
                        1547  3/8” x 16T x 1-1/8”                                     1552              3/8” or 1/2”



B-60
                                                               Plumbing Specialties



Stove Bolts
 Round head with hex nuts
 • 100 bolts and nuts per box                                            PART            SIZE
                                                                        NUMBER
                                                                         1635         3/16” x 3/4”
                                                                         1640          1/4” x 3/4”
                                                                         1641           1/4’ x 1”
                                                                         1642         1/4” x 1-1/4”
                                                                         1643         1/4” x 1-1/2”




Drop In Concrete Anchors                     Sheet Metal Screws
 • 100 per box                                •   Hex slotted
 • Complies                                   •   1/4” Hex head
   ICBO # 3631                                •   Plated
   RR# 24682                                  •   100 per box




                                                                    PART       SIZE      LENGTH
                                                                  NUMBER
                                                                  *1831-100    #7           5/8”
                                                                    1817                    1/2”
                          PART                *#1831 Hex            1819       #8           3/4”
                                     SIZE
                         NUMBER               slotted self-         1821                     1”
                          1558       3/8”     drilling type         1871       #10          3/4”




Drive Screws                                 Self-Drilling Screws
 • 100 per box                                • 100 per box
                                              • Self-drilling point
                                              • 1/4” hex head




                      PART                                             PART
                                   SIZE                                                SIZE
                     NUMBER                                           NUMBER
                      1555        2” x #16                             1830           1/2” x #8



                                                                                                   B-61
Plumbing Specialties



Hex Screw and Nut Setter                              Steel Eye Sockets
 • Use with 1/4” drill to drive                        Flat and Offset
   hex sheet metal and anchor                          • Plated
   screws.                                             • 3/8” N.S.T.
 • Magnetic socket                                     • 100 per box
 • Heat treated
 • 1/4” Drill shank




                                                                   Offset                    Flat
                                                               2-5/8” Length            1-7/8” Length


                      PART                   BODY                               PART
                               SIZE                                                            SIZE
                     NUMBER                DIAMETER                            NUMBER
                      1594     1/4”           7/16”                             1556           Flat
                      1595     5/16”           1/2”                             1557          Offset




Self-Nailing Protection                               Pipe Straps
 • 100 per box                                         • 100 per box
                                                       • Self-drilling point
                                                       • 1/4” hex head
                                                                                     Galvanized
                                                                                       PART
                                                                                      NUMBER IPS SIZE
                                                                                       1614-I    1/2”
                                                                                       1615-I    3/4”
                                                                                       1616-I     1”
                                                                                       1617-I   1-1/4”
                                                                                       1618-I   1-1/2”
                                                                                       1619-I     2”
                                                                                        1620    2-1/4”
                                                       See price                        1621      3”
                                                       page for                         1622      4”
                                                       quantity                      Copper Clad
                                                                        1” Copper
                                                       pack
                       PART                                             Clad Nails     1623*      1/2”
                                  SIZE      GAUGE
                      NUMBER                                               PART        1624*      3/4”
                                                       *with nails
                       1628                   20                         NUMBER        1625*       1”
                                  2” x 5
    Made in U.S.A.     1630                   16                           1664        1626      1-1/4”
                                                       Made in U.S.A.




B-62
                                                                   Plumbing Specialties



                                                Heater Furnace
Sillcock Key                                    Loglighter Keys
 Die Cast                                        Die Cast




                                                                       PART         SIZE     LENGTH
                               PART                                   NUMBER
                                        SIZE
                              NUMBER                                   1705         5/16”      2-1/4”
                               1699      1/4”                          1706          1/4”       10”
                               1700     5/16”                          1707         5/16”       10”



Water Heater
Earthquake Strap                                Four Way Key
 Fits up to 50 gal. water heater                 •   Fits stopcocks, sillcocks and valves
                                                 •   Sizes are 1/4” to 9/32” and 5/16” to 11/32”
                                                 •   Die Cast
                                                 •   Key chain loop




                                        PART                                                  PART
                                       NUMBER                                                NUMBER
                                        1725                                                  1701



Copper Thermocouples
 All thermocouples are furnished
 with universal adapters




                                                                                  PART       LENGTH
                                                                                 NUMBER
                                                                                  9500             18”
                                                                                  9501             24”
                                                                                  9502             30”
                                                                                  9503             36”
                                                                                  9504             48”



                                                                                                     B-63
Plumbing Specialties


Ice Maker Hook-Up Kits
  For use on refrigerators with automatic icemakers. Also use on humidifers.

                                        Poly Tubing
                                        KIT CONTAINS
                                        1. 1/4” x 25’ Poly tubing
                                        1. Self-piercing needle valve        Poly Tubing
                                        1. 1/4” Compression union              PART               SIZE
                                        4. 1/4” Brass insert sleeves          NUMBER
                                                                               2045             Hook-Up Kit
                                                                              2056-25      25’ Poly Tubing ONLY



                                        Copper Tubing
                                        KIT CONTAINS
                                        1. 1/4” x 25’ Copper Tubing
                                        1. Self piercing needle value        Copper Tubing
                                        1. 1/4” Compression union              PART
                                        1. 1/4” Compression male                                SIZE
                                                                              NUMBER
                                        1. 1/4” 90° Compression elbow          2049      Copper Hook-Up Kit
                                                                                                Only
                                                                              2059-25     25’ Copper Tubing
                                                                                                ONLY




Granulated Carbon Filter                                      Self-Piercing Needle Valve
 Filters contain granulated carbon for taste and                For 3/8” To 1” Copper Tube
 odor removal from municipal drinking water.
                                                                KIT CONTAINS:
 SPECIFICATIONS:                                                1. Needle valve
 Container - Polypropylene                                      1. Saddle clamp
 Media- Activated Carbon
 Filter/Screen - Polyestr Felt                                  2. Nuts
 Micron Size - 20                                               2. Bolts
 Flow Rate - 1 GPM @ 60 PSI
 Life Span - 3-6 months
 Effective Filterings - 2000 gal.
 Temp Rating - 120° F
 Pressure Rating - 125 PSI




           PART                      SIZE
          NUMBER                                                                                       PART
           2060          Use 1/4” Compression Fittings                                                NUMBER
          2060-38        Use 3/8” Compression Fittings                                                 2162



B-64
 PART            PART              PART            PART             PART
         PAGE              PAGE            PAGE             PAGE              PAGE
NUMBER          NUMBER            NUMBER          NUMBER           NUMBER
 34193   B-45    34316     B-46    34456   B-51    34570    B-53     496     B-3
 34194   B-45    34318     B-46    34458   B-51    37106    PS-4     5023    B-2
 34196   B-45   34318-RB   B-46    34460   B-51    37108    PS-4    50650    B-3
 34197   B-45    34319     B-46    34461   B-51    37109    PS-4    50710    B-3
 34201   B-45    34320     B-46    34462   B-51    37110    PS-4    50712    B-3
 34204   B-48    34322     B-46    34464   B-51    37111    PS-4    50750    B-3
 34205   B-45    34326     B-49    34467   B-51    37128    PS-4     514     B-3
 34206   B-48    34328     B-49    34468   B-51    37130    PS-4     5200    B-22
 34208   B-48    34330     B-49    34470   B-51    37132    PS-4     531     B-3
 34209   B-45    34332     B-49    34472   B-51    37136    PS-4     532     B-3
 34210   B-48    34334     B-49    34474   B-51    37137    PS-4     536     B-3
 34211   B-45    34336     B-49    34476   B-51    37138    PS-4      54     B-13
 34212   B-48    34338     B-49    34478   B-51    37140    PS-4     555     B-3
 34216   B-48    34340     B-49    34480   B-51    37190    PS-4     560     B-3
 34218   B-48    34342     B-49    34482   B-51    37224    PS-4      59     B-5
 34220   B-48    34344     B-49    34484   B-52    37236    PS-4     5900    B-54
 34222   B-48    34346     B-49    34486   B-52    37237    PS-4     5905    B-54
 34224   B-48    34348     B-49    34488   B-52    37244    PS-4     5915    B-54
 34226   B-48    34350     B-49    34490   B-52    37347    PS-5     5925    B-54
 34228   B-48    34352     B-49    34492   B-52    37352    PS-5     5930    B-54
 34230   B-48    34354     B-49    34496   B-52    37364    PS-5    60010    B-3
 34232   B-48    34356     B-49    34498   B-52    37366    PS-5    60016    B-3
 34234   B-48    34358     B-49    34512   B-52    37406    PS-5     7980    B-55
 34238   B-48    34360     B-49    34514   B-52    37408    PS-5     8015    B-55
 34240   B-48    34362     B-49    34516   B-52    37416    PS-5     8016    B-55
 34244   B-48    34364     B-49    34517   B-52    37418    PS-5     8019    B-55
 34246   B-48    34366     B-49    34518   B-51    37452    PS-5     815     B-42
 34248   B-48    34367     B-49    34520   B-51    37464    PS-5    815-PB   B-42
 34250   B-48    34388     B-49    34522   B-51    37530    PS-5     816     B-42
 34252   B-48    34390     B-49    34524   B-51    37532    PS-5     817     B-42
 34254   B-48    34392     B-49    34526   B-51    37610    PS-7     818     B-42
 34256   B-48    34394     B-50    34528   B-51     428     B-14     819     B-42
 34262   B-48    34396     B-50    34530   B-51     437     B-10      82     B-5
 34264   B-48    34398     B-50    34532   B-51    437-SS   B-10     820     B-42
 34266   B-48    34400     B-50    34534   B-51     439     B-10   851-100   B-15
 34270   B-48    34402     B-50    34540   B-52    439-SS   B-10   851-200   B-15
 34274   B-48    34404     B-50    34541   B-52     464     B-4     851-25   B-15
 34276   B-48    34406     B-50    34542   B-52     465     B-4    856-100   B-15
 34278   B-48    34408     B-50    34543   B-52     466     B-4     856-25   B-15
 34286   B-47    34410     B-50    34544   B-52     468     B-4      873     B-16
 34290   B-47    34412     B-50    34545   B-52     474     B-4      882     B-16
 34292   B-47    34414     B-50    34546   B-53     475     B-4      883     B-16
 34294   B-47    34416     B-50    34548   B-53     476     B-4      884     B-16
 34298   B-47    34418     B-50    34550   B-53     478     B-4      886     B-16
 34300   B-47    34420     B-50    34554   B-53     481     B-4      912     B-7
 34302   B-47    34422     B-50    34556   B-53     485     B-4      913     B-7
 34306   B-47    34448     B-51    34558   B-53     486     B-4     917-PR   B-7
 34312   B-46    34450     B-51    34560   B-53     488     B-4       94     B-5
 34314   B-46    34452     B-51    34562   B-53     489     B-4     94700    B-17
 PART
         PAGE
NUMBER
 94701   B-17
 94702   B-17
 94703   B-17
 94704   B-17
 94705   B-17
 94706   B-17
 94-SS   B-6
 9500    B-63
 9501    B-63
 9502    B-63
 9503    B-63
 9504    B-63
  956    B-17
 956A    B-17
  957    B-17
  958    B-17
  959    B-17
  960    B-17
  961    B-17
  962    B-17
  963    B-17
 9860    B-58
 9861    B-58
 9862    B-58
                 PART                                                    PART
                                             PAGE                                                           PAGE
                 NAME                                                    NAME
              Add-A-Shower                  B-39              Cloth Inserted Rubber Washers          B-10
      Add-A-Shower Riser Brackets           B-41                 Commercial Grid Drains              B-23
         Adjustable Shower Arm              B-38                   Compression Rings                 B-25
                 Aerators                   B-26                    Concrete Anchors                 B-61
         All Thread Rod Coupling            B-60                   Cone Filter Washer                B-20
      Amstan Style Lavatory Hanger          B-31                 Cone Slip Joint Washers             B-22
               Anchor Sets                  B-60                   Continuous Wastes                 B-47
          Anti-Siphon Ballcocks             B-17                    Copper Clad Nails                B-62
           Ballcock Anti-Siphon             B-17                 Copper Thermocouples                B-63
          Ballcock Coupling Nut             B-18                      Copper Tubing                  B-64
         Ballcock Shank Washer              B-20                   Crumb Cup Strainer                B-30
      Basin Rosettes - Deep or Flat         B-30                   Deep Basin Rosette                B-30
             Basket Strainers               B-29                   Dishwasher Air Gap                B-3
Basket Strainers - EZ ON Basket Strainers   B-28                Dishwasher Connector Kit             B-3
         Basket Strainers - Junior          B-27                 Dishwasher Drain Hose               B-3
    Bath & Tub Waste Shoe & Strainer        B-43                       Disposal Kit                  B-53
              Bath Supplies                 B-34, 43         Diverter Spout Lift Replacement         B-38
           Bathcock Coupling                B-34                     Diverter Spouts                 B-32, 33
               Bead Chain                   B-43               Douglas Flush Valve Washer            B-21
              Bowl Gaskets                  B-9                   Douglas Flush Valves               B-16
            Branch Tailpieces               B-52                      Drive Screws                   B-61
          Brass Closet Bolt Sets            B-5                  Drop In Concrete Anchor             B-61
        Brass Compression Rings             B-25              Dryer Duct - Vinyl or Aluminum         B-59
            Brass Float Rods                B-16                    Dryer Duct Clamp                 B-59
           Brass Friction Rings             B-18            Earthquake Strap for Water Heater        B-63
          Brass Overflow Tubes              B-16                      Escutcheons                    B-56, 57, 58, 38
        Brass Pop-Up Assemblies             B-30             Extension Tubes - Brass Tubular         B-50, 51
           Brass Solder Collars             B-19                  EZ ON Basket Strainer              B-28
              Brass Tubular                 B-44 to                  Face Bushings                   B-38
                                            B-53
              Brass Twin Ell                B-34                   Faucet Hole Covers                B-30
            Brass Utility Drain             B-55          Faucet Stem Washer Assortment - Flat       B-22
Brass Waste Connectors (Desanko Fittings)   B-24, 25            Flanges Shallow and Deep             B-56, 57, 58, 38
             Candle Wicking                 B-22                   Flappers - All Styles             B-13, 14, 15
             Cast Swivel Trap               B-53                    Flat Basin Rosette               B-30
         Cast Tees w/ Tailpieces            B-46                   Flat Duplex Strainer              B-27
             Ceiling Supports               B-41                  Flat Head Woodscrews               B-60
    Chrome Plated Brass Cover Tube          B-25          Flex Tubular Adapters and Connectors       B-54
      Chrome Plated Supply Tubing           B-25          Flex-a-Flange Closet Bowl Wax Gasket       B-9
          Closet & Urinal Spuds             B-17                    Float Rods - Brass               B-16
   Closet Bolt - Nuts, Speed Nuts, Caps     B-7               Flush Valve Seal for Amer. Std         B-14
             Closet Bolt Sets               B-5, 6, 7                 Four Way Key                   B-63
      Closet Bolt Sets - Break Away         B-7                   Friction Rings - Brass             B-18
           Closet Bolt Washers              B-7                  Garbage Disposal Shield             B-22
  Closet Bowl Gasket - Sponge Rubber        B-9                   Garden Hose Washer                 B-20
         Closet Bowl Wax Gasket             B-9                       Garden Hoses                   B-3
           Closet Combo Sets                B-8                  Granulated Carbon Filter            B-64
                Closet Ells                 B-52                    Graphite Packing                 B-22
     Closet Flange Extension & Kits         B-9         Handicap Commercial Grid Style Lav. Drains   B-23
         Closet Screws & Studs              B-7
                PART                                                      PART
                                              PAGE                                                            PAGE
                NAME                                                      NAME
         Hangers for Lavatories              B-31              Self-Nailing Protection Plate         B-62
              Heater Keys                    B-63       Semi Cast Traps w/ Cleanouts - Brass Nuts    B-53
      Hex Head Screw & Nut Setter            B-62                       Setting Tool                 B-60
      Hex Nut for Tank to Bowl Bolt          B-10                  Sheet Metal Screws                B-61
         High Rise Shower Arms               B-37       Shower Arm Ell for Fiberglass Shower Stall   B-34
              Hole Covers                    B-30                  Shower Arm Flanges                B-38
           Hose Bibb Anchor                  B-2                   Shower Arm Shut Off               B-37
       Hose Bibb Vacuum Breaker              B-2                       Shower Arms                   B-37, 38
              Hose Clamps                    B-3                   Shower Curtain Pins               B-41
         Hose Washer - Garden                B-20                     Shower Heads                   B-37
         Ice Maker Hook-Up Kits              B-64                  Shower Rod Flanges                B-41
                J-Bends                      B-45                      Shower Rods                   B-40
    Kitchen Sink Hose & Spray Head           B-27               Shower Valve Rebuild Kits            B-35, 36
         Lavatory Coupling Nuts              B-18                       Sillcock Key                 B-63
 Lavatory Drain - Commercial Grid Style      B-23                     Sink Tailpieces                B-49
    Lavatory Drain w/Rubber Stopper          B-23                Sink Traps Brass Tubular            B-45, 46
            Lavatory Hangers                 B-31            Slip Joint Chrome Repair Traps          B-52
             Lavatory Legs                   B-30             Slip Joint Elbows & Closet Ells        B-52
            Lift Wires - Brass               B-16                 Slip Joint Nuts & Sets             B-19
                Lock Nuts                    B-18                   Slip Joint Washers               B-20
             Loglighter Keys                 B-63              Snap-In Faucet Hole Cover             B-30
Los Angeles Code Sink Trap Brass Tubular     B-46                    Soap Dispenser                  B-22
          Washer for Pop-Ups                 B-21                 Solder Collars - Brass             B-19
         Mop Sink Rubber Hose                B-4                   Spud Friction Rings               B-21
       Needle Valve Self-Piercing            B-64                     Spud Washers                   B-21
           Nuts and Washers                  B-6, 7              Stainless Steel Bolt Sets           B-6
   O-Ring Kit Plumbers Pack & Picks          B-22                 Steel Closet Bolt Sets             B-5, 6
    Overflow Plates & Bolts - Chrome         B-42                   Steel Eye Sockets                B-62
            Overflow Strainer                B-43                       Stove Bolts                  B-61
         Overflow Tubes - Brass              B-16                  Strainer - Flat Duplex            B-27
                 P Traps                     B-44                         S-Traps                    B-46
        Pipe Straps - Galvanized             B-62         Sure Grip Flanges - all styles & Plastic   B-56, 57, 58, 38
         Plastic Dryer Vent Hood             B-59                   Tailpiece Washers                B-20
     Plastic Louver Dryer Vent Hood          B-59                   Tank Ball - Rubber               B-16
          Plastic Shower Drain               B-55            Tank Floats - Copper or Plastic         B16
           Plastic Toilet Shims              B-8                Tank to Bowl Bolts & Sets            B-10
               Poly Tubing                   B-64              Tank to Bowl Connector Kit            B-10
              Poly Washers                   B-20                 Tank to Bowl Gaskets               B-20
           Pop-Up Assemblies                 B-30             Tank to Bowl Rubber Washers            B-10
       Quick Lock Hose Bibb Lock             B-2                       Toggle Bolts                  B-60
               Quick Ring                    B-1              Toilet Stabilizer Shims - Plastic      B-8
         Quick Set Shower Drain              B-55                 Toilet Tank Trip Levers            B-11,12
Quick Valve Cover Plates - Stainless Steel   B-42                        Tray Plug                   B-27
         Repair Couplings & Ells             B-51, 52             Tub Spout Extensions               B-33
         Replacement Strainers               B-30                       Tub Spouts                   B-32, 33, 34
              Rod Coupling                   B-60             Tub Strainer - Stainless Steel         B-43
                Rosettes                     B-30             Tubular Chrome Plated Brass            B-44
     Rubber Stopper Lavatory Drain           B-23                 Urinal & Closet Spuds              B-17
       Self Piercing Needle Valve            B-64               Urinal Outlet Spud - Brass           B-17
            PART
                                  PAGE
            NAME
 Urinal Spud Washer - Wall Hung   B-21
         Vent Hood Kit            B-59
          Wall Bends              B-44
           Washers                B-21
   Washing Machine "Y" Hose       B-4
Washing Machine Hook Drain Hose   B-4
   Washing Machine Inlet Hose     B-4
   Waste & Overflow Washers       B-21
   Waste Arms Brass Tubular       B-48
 Water Heater Earthquake Strap    B-63
           "Z" Hanger             B-31

				
DOCUMENT INFO
Shared By:
Categories:
Tags:
Stats:
views:37
posted:11/25/2011
language:English
pages:69