Instalació de VPN per Windows 98
1. Open up the Control Panel.
2. Go to the Network Control Panel.
3. In the Network Control Panel press the Add button.
4. Select Adapter and press the Add button.
5. Select Microsoft in the Manufactures window. Then select Microsoft
Virtual Private Networking Adapter in the Network adapters window.
Press the OK button. (Si no hi és mirar annex 1, al final d’aquest document)
6. Press the OK button. The computer may prompt you for the Windows 9X
CD.
7. When finished the computer will prompt you to restart the computer. Press
Yes.
8. Double-click the My Computer icon.
9. Double-click the Dial-Up Networking icon.
10. Double-click on the Make New Connection icon.
11. Type Nom_Connexió_VPN in the name box and select Microsoft VPN
Adapter in the device box, then click the Next> button.
12. Enter the Hostname preguntar-ho, then click the Next> button.
13. Click on the Finish button.
14. Right-Click on the Nom_Connexió_VPN icon and select Properties.
15. Click on the Server Types tab. Check Log on to Network, Enable
software compression, Require encrypted password, Require data
encryption, and TCP/IP. Uncheck Record a log file for this connection,
NetBEUI, and IPX/SPX Compatible.
Note: Perform the following steps through Step 16 only if you are on a
Cable Modem, DSL, or using any other non-AmesLab service provider for
your commercial Internet service. Otherwise go to Step 17. Click on TCP/IP
Settings.
16. Check Server assigned IP address, Server assigned name server addresses, and Use IP
header compression. Uncheck Use default gateway on remote network. Click on the OK
button.
17. Click on the OK button.
18. Double click the Nom_Connexió_VPN icon.
19. In the username box
enter your vpn username and password in the password box. Click on
the connect button.
20. When connected you will see a connection icon in the bottom right-hand
corner of your screen.
Annex 1:
If you are running the original edition of Windows 98, install the following Windows 98
Dial-Up Network 1.4 Upgrade (April 2001).
”http://www.microsoft.com/downloads/details.aspx?FamilyID=279469a6-c3e5-4fd6-
8ce0-96dd1db2d09f&DisplayLang=en”
For those with Windows 98 SE (Second Edition), install this Windows 98 SE Upgrade.
“http://www.microsoft.com/downloads/details.aspx?FamilyID=be625dbb-5afe-426a-
bc0a-71aac2000ae8&DisplayLang=en”
If a higher security level is needed, it is possible to bring machines running Windows 98
SE (Second Edition) to 128-bit encryption (from the default 40-bit) via 128-bit DUN for
Windows 98 Second Edition.
“http://www.microsoft.com/Windows/ie/downloads/recommended/128bit/default.asp”