13CM KIT - Mini-Kits

Document Sample
13CM KIT - Mini-Kits Powered By Docstoc
					SECTION1         BASIC TRANSVERTER PARTS KIT

ITEM             DESCRIPTION                      QUANTITY PRICE        TOTAL       WEIGHT COMMENTS FOR PARTS LIST

EME94 KIT1       13 CM TRANSVERTER KIT               1     $   90.00    $   90.00   45     Req 5x SMA09 5x SMA16
144/432 DIPLEX   I/F DIPLEXER KIT                    1     $    4.50    $    4.50   10     Specify 144 or 432
7809T            Regulator 9V                        1     $    0.85    $    0.85   1      Regulator for EME94 Transverter
EME175-KIT1      500MHZ LOCAL OSC KIT                1     $   36.50    $   36.50   50     Req 1 x SMA09 1x SMA16
EME177-KIT       OSCILLATOR HEATER KIT               1     $   24.50    $   24.50   24     Used with EME175 & 50 deg C Crystals
EME139 KIT3      OSCILLATOR MULTIPLIER KIT           1     $   35.75    $   35.75   45     Req 2 x SMA09 2x SMA16
94.00MHZ         94 MHZ TS07S CRYSTAL                1     $   34.00    $   34.00   1      For 144MHz Input / 2400MHz Output
82.00MHz         82MHz TS07S CRYSTAL                 0         $34.00   $     -     0      For 432MHz Input / 2400MHz Output
50 DEG C         50 DEG CRYSTAL HEATER               1     $    1.85    $    1.85   1      For TS07S Crystal
EME144           RELAY KIT INCLUDES 3x SMA09         1     $   26.80    $   26.80   14     Req 2xSMA16 ( 1x SMA10 with QF141 & NS07 )
EME66            TRANSVERTER SEQUENCER KIT           1     $   40.00    $   40.00   62     Hardwired with RG316 no connectors used on Board
SMA09            SMA SOCKETS PCB MT                  8     $    3.30    $   26.40   13
SMA16            RIGHT ANGLE SMA PLUGS               10    $    4.40    $   44.00   61
RG316            50 OHM CABLE per foot               5     $    1.50    $    7.50   50     Req around 3 feet so 2 extra supplied

                 TOTAL                               33                 $ 372.65 377

SECTION2         HARDWARE KIT

BOLT4            M3 x 6MM BOLT                      30     $    0.06    $    1.80   16     Mount hardware to Box Includes a Few Extra
WASHER01         M3 STAR WASHER                     20     $    0.05    $    1.00   1      As above Includes a few extra
NUT01            M3 NUT                             10     $    0.05    $    0.50   3      As above Includes a few extra
SPACER03         10MM SPACER                        10     $    0.45    $    4.50   12     To mount EME65/144/66 to Box
LED6             GREEN LED 5MM                       1     $    0.25    $    0.25   0.5    RX Led connects to EME66 TX volts
LED1             RED LED 5MM                         1     $    0.25    $    0.25   0.5    TX Led connects to EME66 RX volts
LED BEZEL 1      LED HOLDER 5MM                      2     $    0.10    $    0.20   0      Holders for above Leds
RS01             RCA SOCKET BLK                      1     $    0.75    $    0.75   3      Use for EME66 12v or 0V TX input FT290R TX Out
FUSE HOLDER1     2AG FUSE HOLDER PANEL MT            1     $    2.00    $    2.00   3      12V DC Power Input
FUSE 4A2AGSB     4 AMP 2AG SLOW BLOW FUSE            1     $    0.75    $    0.75   2      4A Slow Blow Fuse for above Holder
BNSO4            BNC BULKHEAD SOCKET SUIT RG316      1     $    5.25    $    5.25   17     144/432MHz Input connect to EME66 Kit
NS07             N SOCKET SUIT QF141                 1     $    8.35    $    8.35   39     Use with QF141/SMA10 on EME144 Kit
QF141            Cable 50ohm 0.5ft                  0.5    $    4.95    $    2.48   20     Ref to NS07 above
SMA10            SMA Suit QF141                      1     $    3.80    $    3.80   4      Ref to NS07 above
MCM 1-2          2 PIN MICROPHONE CHASSIS PLUG       1     $    2.05    $    2.05   10     12V DC Connector for Rear of Box
MLF 1-2         2 PIN MICROPHONE SOCKET                1      $   2.25 $   2.25 11       12V DC Connector
SWITCH2         POWER SWITCH LED ILLUMINATED           1      $   5.15 $   5.15 7        Power Switch for Front Panel of Box

                TOTAL                                13.5              $ 41.33 149

SECTION3        ENCLOSURE BOX KIT

1444-12 Box     Hammond 178x127x51mm                   1                                 Stocked By RS Components
1434-14 Cover   Hammond 229x127mm                      2                                 Stocked By RS Components
GROMMET1        9.5MM GROMMET                          1      $   0.48 $   0.48 1        To feed wire through boxes
GROMMET2        12.5MM GROMMET                         1      $   0.52 $   0.52 1        To feed wire through boxes


                TOTAL                                19.5              $   1.00 2

                GRAND TOTAL                           66               $ 414.98 528      grams




UPDATED LIST 29/3/2011. PLEASE LET ME KNOW IF THERE ARE ANY MISTAKES IN THIS LIST.
THE ABOVE PARTS LIST HAS BEEN CREATED FROM THE PARTS THAT WERE REQUIRED TO BUILD THE FULL BOXED KIT
PLEASE REFER TO THE 23CM KIT VERSION ON THE WEBSITE AS WE DONOT HAVE PICTURES OF A 13CM BOXED VERSION

SPACERS CANNOT BE EASILY USED ON THE EME94 & EME139 BOARDS TO MOUNT TO THE BOX. IT IS SUGGESTED THAT TINPLATE
BRACKETS BE FABRICATED & SOLDERED TO TINPLATE BOX ENDS & THEN M3 NUTS, BOLTS& WASHERS BE USED TO MOUNT TO THE BOX.

				
DOCUMENT INFO
Shared By:
Categories:
Tags:
Stats:
views:22
posted:11/23/2011
language:English
pages:2