Docstoc

Web pages

Document Sample
Web pages Powered By Docstoc
					CREATING A WEB PAGE




AN ONLINE WEB PAGE EDITOR

                                                                                               1
Scriptor has a unique Web page editor. With Scriptor, you do not have to use FTP : work is always done on the
server, online, in real time. Each page created with Scriptor is a dynamic page changes become immediately
accessible on the Web. However, it is possible to work in private mode and delay the definitive online content Web
page until its publication. Otherwise, Scriptor instantly disseminates any information before it by directly posting
on the website. In addition, Scriptor allows sharing of a file between multiple users for a decentralized
management; multiple authors can work simultaneously in a page. With Scriptor, it is not necessary to install on
any software client whatsoever accept, of course, your browser (Explorer, Firefox, etc.), because the dynamics of
production goes through the Web. By him, you will reach all the necessary tools to build your pages and publishing
of your data.
1
    Abbreviation for "File Transfer Protocol".

Scriptor, you have two modes of composition of Web pages. The first mode identifies each component of the page
(table, text, image, etc.) and allows individual treatment of each object. This mode of composition is necessary for
the deployment of large-scale sites or for the establishment of a Portal: it meets more sophisticated webmasters
or graphic designers who need to deploy a site with an architecture impressive all-in-now the uniformity of the
graphical components. These Web authors will then use gladly techniques as file merging or repeated images
stored in a data view.

The other mode of composition uses a friendly editor that greatly simplifies the task of users by offering such-as (a
          2
"Wysiwyg " Editor) editor. The Publisher then acts as a small module similar to those of major word processors
available on the market at any point data processing. This editor can be activated for each insertion point. One
vendor could control a fit, but a standard table could also involve several publishers, in each of its cells for
example. This approach increases however the process of entering and it will prefer to use mode standard instead
of enable multiple publishers simultaneously in a page composition.
2
 "WYSIWYG", literally: "What You See Is What You Get". This term refers to an editor that can display on-screen the immediate
processing of objects. The "wysiwyg" Editor reproduced faithfully and screen instantly user manipulation. It simplifies the task
of data entry as well as it makes processing interface; this editor takes the standard word processing large software available on
the market.

Scriptor therefore offers a unique mode of construction of WebPages, a mode that combines ubiquity, immediacy
and file sharing.
TOOLS

You can access the Scriptor tools by clicking one of the tabs in the navigation bar.


THE NAVIGATION BAR

The Scriptor navigation bar appears when you enter in the system after you log on. It allows you to move through
different Scriptor editors to perform specialized tasks management and/or processing information: newsgroups,
electronic document management, editor of content etc. Choose the tool that suits your needs for online content.




DESCRIPTION TAB BAR NAVIGATION AND ITS SUBMENUS.




 Icon                       Name                                             Function


                                                                             Utilizes the homepage in the Scriptor application
                                                Home
                                                                             start-up.


                                                                             Starts the Scriptor Web page editor, and allows
                                                                             access to the tools palette and create all
                                                                             WebPages with document editor.

                                                                             Powers up the set of tools for automated
                                                                             management of publications and blogs; to create
                                                                             a publication and manage settings.


                                                                             Launches the menu editor; compose menus
                                                                             quickly taking into account the information
                                                                             hierarchy according to the selected palette.


                                                                             Starts the automated tool for site map
                                                                             management


                                                                             Provides access to the Directory Manager
                                                                             Scriptor; user can manage (remove, delete,
                                                                             rename) directories and place any type of
                                                                             documents. Creates physical directories.

                                                                             Provides access to the module management of
                                                                             the DG and the center of documentation; allows
                                                                             merging content from different directories on
                                                                             multiple servers.

                                                                             Launches the Scriptor IM; to manage the
                                                                             individual mailbox and know the name of online
                                                                             users to attach them quickly.
             Creates playlists while complying with the security
             documents and secure user groups.


             Starts the workflow management tool can create
             the hierarchy approval documents in working up
             to the publication.

             Allows access to directory or directory; registered
             users through the window of the telephone book,
             changing user can constantly, keep itself up-to-
             date information regarding him.

             Launches the window discussion groups to which
             it is possible to participate and allows you to add
             new ones.

             Start e-commerce module to create the catalogue
             of items for sale; allows you to display images,
             prices, etc.


             Starts the module hyperlinks and allows the
             administrator to manage.


             Opens the grand Scriptor administration module;
             all functions of this module is mainly used by the
             webmaster, but users can also access if they have
             administrators privileges.


             Provides access to the administrator set of default
             settings management modules.


             Opens the window of the Coveo Enterprise Search
             search engine management.


             Launches research activities with several devices
             filter system window.


             Launches newsgroups Management window. The
             moderator, the sous-administrateur and
             newsgroups administrator see appear consistent
             with the privileges they hold management tools


             Lance window management of locked files and
             allows the administrator to manage.


             Allows the administrator to choose the default
             homepage of the site and the redirection page if a
             page was not found.

             Opens the window ID Scriptor version; see the
             date of the last update.

             Disables the Scriptor Ramène window connection
             to the forefront; especially useful to change the
Disconnect
             alias of connection without having to leave the
             browser connection.
PUBLISHING PRINCIPLES

Scriptor is a content management tool to decentralize the places of publication and assign privileges publishing key
people. Thus publish the latest information is entrusted to those who are close to the action and responsibility
should assist in first line. The webmaster does more activities online content, it delegates these tasks to those
responsible for the different services online. To update the site done by merging items controlled in part by the
software system which assembles from parts of contained in each of the services. Graphical uniformity the site is
managed by a journal style that ensures consistent visual. The benefits of such a process reside primarily in the fact
that information is put on line quickly, in real-time, and that its authenticity can be questioned since they are the
managers involved in placing it.

THE STRUCTURE OF THE CONTENT

To edit the content of your website, there are two approaches: quick edit mode in the same webpage and
background mode which enables an Edition Advanced at all the subtleties of the editor


EDITING SURFACE (QUICK EDITING BUTTONS)

The editing surface is done in the same Web page by clicking the edit this page button.




When you click this button, Scriptor reveals icons management elements that you can change either:

         • Elements on a webpage by clicking on the icon:

         • Text in a webpage by launching the "wysiwyg" Editor:

         • A publication by clicking on the icon:

         • Newsgroups by clicking the icon:

         • An element of the DG of the document by clicking on the icon:

         • By clicking the icon site map:
ACCESS TO THE BACKGROUND (ADVANCED EDITION)

If you wish to access the advanced editing tools, you must enter a layer behind the surface of the page and will
enable the desired tools.

Advanced Edition is available in the toolbar at the top of your page and it allows you to launch the Advanced Edit
mode giving you access to all software Web page editing tools.

In most cases you won't use these advanced tools; however, it is interesting to know that they exist and they can
help you troubleshoot specific editing tasks (as insert new tags or load a backup copy).

INFORMATION MANAGEMENT TOOLS

There are five publishers content in Scriptor, each performing a specific task.

To view quick edit markers, click the edit this page button.




PAGE SCRIPTOR (SITE WEB PAGE)

The pages on your site can be changed easily by clicking on the edit this page icon   and icon management Web
page.
Depending on your permissions, page elements that can be modified become accessible.




The text of the pages on your site can be changed easily by clicking on the edit this page icon   and icon   starts
the "wysiwyg" Editor




By clicking   you view change form for you to proceed with any desired content changes.
As in any editor or word processor you do: you select the offending text, replace it with the desired character,
move objects by "dragging and dropping", create tables, etc.

For the operation of tools enabled by Wysiwyg toolbar buttons, allow drag cursor manner to show the ToolTip.

Management of tables is done as in Word and you can click on the icons to add, remove, etc. rows or cells.




                                             IMPORTANT NOTE
When you write new text, or when you make corrections, should be respected the stylistic characteristics of your
site. In this regard, use only the titles and the characters provided for in the style sheet created to support the
graphic signature. It is important to comply with these stylistic requirements to maintain visual consistency of the
site, otherwise each page created with too much freedom might appear as a Visual eccentricity that explodes. So
do not delete the images that have been inserted in each section.

To help find you, copy - paste text to an existing page (so you copy the stylistic elements: choose the font size for
securities, etc.) and rewrite above the new content. En arrive thus to maintain uniformity of style site providing a
beautiful visual consistency.

When you are finished making changes, click the buttons at the bottom of the page.




         • Preview: allows you to find the page in the context of publication.

         • Record: keep the changes, without moving them into line.

         • Save and publish: backs up the changes, and publishes on the site.

         • Edit properties page: provides access to properties page and allows extensive changes (you are not
         usually to take care of these elements).

         • Return: undoes all the changes and returns to the previous version of the page.
THE DGS (ELECTRONIC DOCUMENT MANAGEMENT AND ITS TREE)

The electronic document management allows you to upload documents (.doc, .pdf, .xls, etc.) and place them in
tree form.

When your page has a DG, click the     icon to start the editor and make the desired changes:




Use     to add content to an existing folder.




Use Insert before   or insert after   a subfolder or a link to where you want

Choose the desired object type and perform as specified by the page management for each element:
• To a subfolder: specify the name of the subfolder.




• For a link to a website: specify the link URL.




• For a page Scriptor: write new page name or specify the number of the existing page by searching with
window search.
• To a discussion group: choose the group from the search window




• A link to an attachment: import the part by using the procedure "Browse" to drop it into the destination
directory, and then choose this room by clicking on the triangle selection. If the file is already in one
directory, select it simply.
• To make the link to the content of a directory: Browse in the directory structure and click on the desired
directory. All content of this directory will be accessible from the DGs (DGs) documents.




• NetQuiz (product of the CCDMD), choose to make a link to a quiz you want.
When you want to add a new folder          , a new file     in a directory or change the sort order       , click on the
corresponding icons.




By clicking on the      icon, the selected files are deposited directly into the correct directory on the server; you can
thus directly in the site, manage all the documents that must be shared by users on the website.




PUBLICATIONS

Publications module allows you to quickly publish information on the home page. The module is used to quickly
post a new or any type of information (document, link, image, etc.). To publish via the publication module, must
click on the   icon in the input window.
Choose Add or edit




Then fill the fields in the item properties window:




         • Title: enter the new title in the field name.

         • Check active if you want the item to be active in the Scriptor page (otherwise it will be visible only in the
         archives).

         • Summary: enter the summary of the new

         • Date start - end date: If there are specified when placing online publication and the date of withdrawal;
         otherwise the check in any time.

         • Image: insert a picture as required (must meet the dimensions defined in the signature graphic.)

         • Search: If selected, locate address website or the PDF, .doc, .xls, etc that you want to publish.
         • Template: to write the new in a page template.

         • No link: to view the title and the abstract only.

Click Save to close




HOW TO MANAGE?

Here are some guidelines concerning the management of some of the elements in your Web site.


WEB PAGES

For the vast majority of cases, the pages on your site can be changed directly in the same page by clicking the
Quick Edit icon . Then click the      icon to launch the form editing (to edit or add). Use the toolbar "wysiwyg"
Editor to perform additions or changes you want.




Don't forget to click Save       to save the changes and click Publish tab     of the toolbar on the left to put
online.


ADVANCED OPTIONS

If you want to display the Advanced Management Web pages, click the Edit tab                              , click
content editor          in the toolbar.
Locate the page you want to edit in the DG, click the page icon to display it in editing mode and make the desired
changes.




If you wish to insert other elements on the page, click Add , then click on Insert from the menu on the left to
deploy elements of the menu and make the desired maneuvers.




Choose the object you want to insert from the menu list and follow the instructions by the window property of the
object you want to insert.
ATTACHING DOCUMENTS

When you want to display a link to an attached document (.doc, .pdf, .ppt, .xls, etc.) you must first import it into
Scriptor. To do this, make sure to place it in the correct directory by choosing from the drop-down list import
window.

Then click the Browse button and choose the right document and click Add.




ADD A NEW PAGE OR NEW FOLDER

To add a new page in the menu, first make sure be quick edit mode. To click first on the home page icon to remove
the menu on the left menu bar. Then click Quick Edit         . Then locate the      icon that you can manage site
maps.
Allows you to manage all the pages of your site: add new pages, new folders, create new sections on the menu,
adjust the breadcrumb, etc...




When you insert a new page, drag to the DG by choosing the page position in the DGs (before     or after   ).




Click new folder or new page Scriptor or Add existing Scriptor pages according to your needs.




Type the page name and description. Check if the template page should be (create the page) or change the
number of the template page. Click Save.
IMAGES

Introduce a simple image into a form page

To introduce an image on a form page, click the               icon in the toolbar "wysiwyg" Editor, and then fill in the
fields of the image properties window.




Fill in all relevant fields of the image properties window.




When you click the         button you start the directory in which you build your image file management window.
Don't forget to select the appropriate directory from the drop-down list.




Locate the image you want to insert into the correct directory and select it by clicking the icon.
                                            IMPORTANT NOTE
If the image you want to drop into your Web page does not exist in a directory, you must import it. Choose the
appropriate deposit directory, and then click the Browse button, click the Add button. Then click the resize
icon




Choose the appropriate image format. Check constrain proportions if you want.




If you wish to retain the original format of the image, click on Save under, otherwise the old image format will be
crushed for the benefit of the new dimensions.

Create a photo album

To create photo album, click photo album.
Then fill in the relevant fields: click the Add images, icon   and then choose the images you want in one of your
directories, or import them by clicking the Browse button.




                                             IMPORTANT NOTE
We strongly recommend that you resize the actual format of images after they are imported. To do this, choose
the images you want to change the format by clicking in the selection box, and then click     resize selected
images.
Don't forget to fill in the fields of the album properties window:




         • Name of the album.

         • Destination directory (it is IMPORTANT of LE choose)


You can choose the current directory by simply clicking        and then click the address located in the center of the
window.




         • Height image current.

         • Height of thumbnails.

         • Number of thumbnails per row.
For each image, you can also give a description by clicking on the      icon.


VIDEOS (ANIMATED SEQUENCES)

To insert a sequence in a Scriptor page, first open your page via edit - content editor. Once on your page, click
point to insert , click Insert a video from vertical document Manager toolbar.




If you cannot see insertion point, click rights and markers. Choose the tag you want to enable, then do the
insertion of your video by clicking video.

Fill in the fields of the properties of the video window.




In the full code field, you can give the address accessible sequence from YouTube are pasting the access code as it
appears in the same window for playback of YouTube.

You can also choose to start video automatically on the display page (select the autostart check box).
WORKING TECHNIQUES


CHECK OUT THE SECRET TAGS

One widely used techniques for transferring information in your site is to copy information in your Word processer
and the Paste on the page of your site. You'll notice that, in doing so, you also copy the original styles and it is
difficult to find the stylistic elements of your own website. If you want to apply the requirements in order to
standardize your Web page to the entire site, you must first remove the secret word tags. To do this, there are two
techniques.


COPY-PASTE IN THE BLOC NOTES

It's just copy the text to insert in your WEB site and paste it into the block note or any other basic text editor. (ex:
Notepad ++), which has the effect of removing all unnecessary tags and unwanted styles. You then copy back the
text block note and paste it into the Wysiwyg.

Use the icon

Alternatively, you can copy your text directly into your Wysiwyg. Then select the text and click the         button to
remove all unnecessary codes.




ELIMINATE UNNECESSARY TAGS

When correct or create a new page in your site, it is important to follow the styles of each page.

Use the styles of the style sheet as they appear in the editor. If you wish to reproduce faithfully the typographic
signature site, copy and paste snippets of text drawn in other pages. So your work will conform to all pages
throughout the site that presents a nice graphical uniformity. It may be that when you copy - paste a table, you
have difficulty in reproducing the same character; to find the character origin, eliminate the "P" tag you find at the
bottom of the page "wysiwyg" Editor

Click the "p" at the bottom of the page, and then "Remove" in the list of information in the right column of the
window. Your table will thus balance and characters meet their original appearance.
You can close the right panel by clicking the        button.




COMPLY WITH STYLES

Thus, it is important to follow the styles of the site. Count on the model of existing pages to create new pages and
share this idea that the Visual quality of your site will be judged on the strength of its typographic appearance
draws strong and uniform design while excluding the wacky typographic drift.

Thus, faithfully reproduce the styles for the following:

         • The titles

         • Text, the font

         • Tables

         • Bullets

         • Links

         • Publications


You can find the styles palette by clicking on the       button show right panel of your editor.
ADVANCED ELEMENTS

Here are a few items of your Content Manager Advanced management. Use them as required to recover a backup
copy or to display a new insertion point.


MANAGEMENT - MODE PLAYBACK MODE

To view management when you navigate in the Scriptor DG, click the Manage button.




TREE MODE - NORMAL MODE

To switch to normal mode when navigating in the Scriptor DG, click the link back to normal mode




RECOVER A BACKUP COPY

To recover a backup copy, display the Web page you want using the content editor.




Navigate in the DG. Locate and open the page you wish to view a previous version.
Then, click load of the window that lets you choose the version you wish to retrieve. Choose the version you want

from the drop-down list, and then click the Search button




Confirm by clicking the date and time of the release you want from the list of backups, view the page ensuring that

it is the correct version, then confirm by clicking the     button.




AN INSERTION POINT / REVEAL A MARKER

To view an insertion point, navigate through the content editor in the DG and locate the WEB page in which you
want to appear (entry points) markers . Click rights from the menu of left, click markers. Select the points you
want to make visible in clearing and confirm by clicking Insert          .
CREATE A NEW PAGE SCRIPTOR WITH CONTENT EDITOR


To create a new Web page, click first on the content editor icon        in the navigation bar.


In the left menu, then click the new tab        .




In the property page, type your page title in the title box. Also write a short description in Description.

Choose titles that are meaningful and do not hesitate to dial all subsequent versions of a page: my page-1, Ma
page-2, etc. Then click Save. Scriptor Web page editor opens the new page instantly: (for suite page creation
process, see Insert content into a Scriptor Web page .)

Tip : You can also create a new page by using the canvas page that exist already or make a backup copy (if you give
the sharing for example). If you know the number of the source page, use the checkbox Add the page to enter its
ID number, and click Save. Otherwise click on the Search button to initiate a search to locate the source page. To
become familiar with the research in Scriptor, see find document . If you want the page to be used as page frame,
click the box frame page.


CREATE A PAGE FRAME

All dynamic pages are Web pages created by Scriptor. On the display, they therefore appear as the result of an
instant Assembly of the components that make up. This characteristic revolutionizes Web pages where it is now
possible to separate design container (the general framework of the page: menu, the top banner, bottom of page,
the logo of the institution, the frame layout, etc.) content, i.e. the actual information that will be displayed. As a
rule general framework page appears as the page that contains recurring Web site pages elements while the
content page offers original content just drag in a frame of reference. One could say that it comes so to separate
the (page framework) containing content (new page).
Thus, a Scriptor page can be created using resources framework page that displays a common formal master
shared by the family of pages that are linked. Page framework can then be used in place of gestation for an entire
generation of content pages to which it is used presentation environment. In other words, the content and
information is slid into the containing page framework. The page framework carries out his work of matrix visual
design while content pages that are derived are own information that introduces the specificity and originality.

Such a process easier site management and ensures its homogeneity. It allows rapid and frequent updates. Indeed
just edit one of the elements of the framework page for all other pages that are derived are immediately altered in
turn.

 Tip : A frame page itself can merge other pages as a master item (top banner, banner bottom, menu links, logo,
etc.). This technique of separate elements that compose a page dynamically in standalone pages allows also a
simplicity and flexibility in managing your pages. Simply, in effect, make a single change in a merge page so that
the whole site is updated. On the other hand, should create the framework, a model of content (that you name
page content-section x, for example) page page to build this page reference all other pages of the said section.
Finally, it is useful to lock all fields in the page content (except for editors "wysiwyg" fields) so that the applicant
can modify fields content which he assumes editorial responsibility.

To create a page frame, first create a new Scriptor page either from the new menu on the left           or from the DG
tab.

In the page properties window, type the name of the page and check the page frame.




By choosing check page frame, you ask Editor to view this page as a containing page that will serve as a model to
content pages. Thus, content slides (by merger) in the container that hosts it. Each framework page is now

identified by a characteristic icon         (in the normal search window) and         icon (in the tree view window).
This icon will later give access to a Publisher specialized to handle pages all frames as: allocation frames pages and
print frames, massive management pages, add pages.
INSERT THE CONTENT INSERTION

In the new page frame, choose Insert a point insertion content by clicking the          button in the Toolbox. Note
that point content insertion icon     appear in the frame page only. When you build a new page of content from
the frame page, inserting content icon will be replaced by the usual insertion point. In any new content page, click
the insertion point to add information of your choice, preferably in the "wysiwyg" Editor




REMOVE TAGS

The wise webmaster wishing to protect all the graphic elements of the page will have recourse to a simple trick: to

hide different editions page tags. To do this, click markers from the left menu       . The page is displayed with
check boxes for the selection of markers. Select all of the tags you wish to block access and leave empty marker

that you want to make it accessible and click checkboxes.




In the window on the left, only markers "wysiwyg" publishers will be activated in the content page and they will
therefore be alone can be changed by the user in the page content
CREATE A CONTENT PAGE

Accelerating construction pages content, use a named page contents-0 for example model providing a page
reference on which you build the subsequent pages. To build new pages, click the new tab           in the left menu
bar and then enter the name of the page content, a brief description, then the number of the page where the new
page is created in the create the page check box. You can do from the search by clicking on the button Search.




This new page will use the elements of primary content page (with hidden tags) and the containing page
framework associated with it.

This procedure can then be used to create all the pages of the site.


BUILD PAGES USING A FRAME PAGE

To build pages using the template of a page frame, you must ensure that be included in the page properties page

frame number. To register the number of the frame page, click the Properties tab         in the left menu.




Search needed among the Scriptor pages by clicking on the              button then enter the number of the desired
frame page in the page frame area.

Finally click the        button. The new Scriptor page appears with a content inserted into the model chosen
framework page. Thus, content fits into the container.
Note: When you attach a page number frame to a page of content, you allow Scriptor drag everything on this page
in the page framework containing exact instead of content insertion point. New page thus obtained, then appears
as the perfect fusion of the container and the content. This operation, which describes very well the principle of
operation of the framework versus the page content, page quite well illustrates the content in one containing
independent dynamics that the page framework and the content migration process.

Manage the award frameset pages
You can manage the award frameset pages by clicking on the icon page list (the normal search or search by tree).


CREATE A NEW PAGE WITH THE DG PAGES SCRIPTOR

The use of the DG fast and logical pages created in Scriptor organization. It is you who determine progresses and to
as for creating pages, classification of content in a tree you're building step. This procedure is, and by far the
easiest way to list the contents of your pages in a structure which épousera your logic classification.

Too, we cannot recommend to use this method when creating pages Web Scriptor. To create a page on the DG
Scriptor, click   edit - content editor.




In the tree Scriptor page window, click Management if you are in read mode.




Window deploys management mode; now you can build a tree with folders and subfolders in which you submit
your pages Scriptor. While reading mode allows you to search alphabetically by name or number of pages, the
management mode launches the DGs. This personal tree may be built at both and so that you can import all of the
pages on which you have rights management. However to build the tree as and is the most logical port for the
organisation of your corpus of webpages in Scriptor.
BUILD THE SCRIPTOR DG

In the tree page window, click Add folder.




In the root property to add to folder window, choose the folder properties according to your preferences:

        1 Type the folder name.

        2 Choose (alphabetical or numeric) sort order.

        3 Enable autodial or not.

        4 Determine how grouping pages: a. enable grouping or not.

                 b. indicate the depth of scanning (number of levels displayed in the DG).

                 c. choose whether to display the page title.

                 d. indicate whether there is place:

                          i. style display.

                          II. header used.

                          III. page frame.

                          IV. print frame.

The only required field in this window is the name of the folder field. If you don't specify any other element,
Scriptor will apply the default sort order is alphabetical view. Save your selection by clicking the Save button.
DG Scriptor window appears again with its icons management. Therefore, you can build a hierarchy of folders and
subfolders according to the classification you want to adopt for your Web pages.
To create a new page in the management mode, click the new page icon              .




In the property page, type your page title in the title box. Also write a short description in Description.




Choose titles that are meaningful and do not hesitate to dial all subsequent versions of a page: my page-1, Ma
page-2, etc. Then click Save. Scriptor Web page editor starts instantly: your new page opens and displays the same
properties as the page on which it was creates.

Tip : You can also create a page by using the canvas page that exist already or make a backup copy (if you give it in
sharing). If you know the page number of the source page, use the create in the page box to enter its ID number,
and click Save. Otherwise click on the Search button to initiate a search to locate the source page. To become
familiar with the research in Scriptor, see find document .
EDIT THE PROPERTIES OF THE PAGE

To change the properties of a page, click the Properties tab     to access page properties window.




The Scriptor page properties are elements on a number of General characteristics of the page as:

        1 General properties page

                 a. title page as it appears in the title bar

                 b. framework page (this page refers it to a page frame or not)

                 c. framework printing (printing framework used by the page)

        2 Properties background

                 a. choose background image

                 b. specify repeat mode

                 c. choose background color

        3 Color hyperlinks

                 a. link

                 b. ties visited

                 c. ties selected
        4 Properties text a. choose the color of the text

        5 Properties referencing and metadata

                 a. choose language

                 b. metadata types

                 c. field metadata

        6 Properties of header and body of page

                 a. include Doctype

                 b. include the headers in the text editor

                 c. free code field headers and body of page


SPECIFY THE NAME OF THE PAGE

When you create a page, you can reveal the name of the page in the title bar. Simply insert the name that you
want to give the page in the text box and click the Save button.




The name of the page is part of the title bar, before the page number.




PAGE FRAMEWORK

When you want to create a new page Scriptor by using a framework page, you enter the page number in box page
framework. Thus, a new formal will dynamically restructured in the new page every time that you will use it by
using recognized framework page. It is as containing allowing you to detach it from its content. The framework
source page will offer large layout characteristics target already pre selected in the content page. The new content
page will then only offer content fields to be posted to a named tag insertion point. The user will not have to
confront a problem of management complexity since the system will always present him a dynamically built page
where he can publish his choice information in the boxes provided for this purpose by the designer of the page.
To call a page frame framework as page container, indicate simply its number in the page frame area in the page
properties window.




If necessary click the find icon     tracking page on the DG Scriptor framework to which want you to use.




Then Save your changes before leaving.


FRAMEWORK PRINT

Print framework is a skinned Scriptor page general information usually related to the containing Web page (menu,
header, low page, title, etc.) and which serves as a framework for publishing for the strategic content of a page.
Print framework is useful for delete as incidental information page you want to print and retain Scriptor as much of
the publication. By choosing to link a Scriptor page to print framework, you allow the reader to print the essential
information content linked to this page.

To bind bind content of a page to print, frame type simply number in the box framework print in the page
properties window.




If necessary click the find icon    tracking page on the DG Scriptor framework to which want you to use.




Then Save your changes before leaving.
INSERT A BACKGROUND IMAGE IN A PAGE

A background image is a graphical element inserts in wallpaper and above which you can drag other objects that
will be coming to overlay (text, image, table). Such an image is ideal in order to add a Visual context to appear
permanently in wallpaper as soon as the page will be displayed.

To insert a background image on the page, view the page properties window. And, in the background properties

section, click on the Search button      to navigate to the location of your image.




Then follow the instructions described in Insert an image to install your background image. Select use or not to
display the image and also choose the desired pattern.




You can choose between four types of repetitions:

        1 Standard pattern: fill the image background tile.

        2 No repetition: copies the image only once.

        3 Horizontal pattern: copies the image in horizontal sequence at the top of the window.

        4 Vertical repeat: copies the image into a vertical sequence in the upper left of the window.
INSERT A BACKGROUND COLOR ON A PAGE

To insert a background color on a page, use the Search button       to display the palette color for quick selection
or, yet, enter precise values code RGB, i.e. red, green and blue; you can also enter values for the corresponding
hexadecimal code.




To finish, then click the Save button.


CHANGE THE COLOR OF HYPERLINKS

You can change the color of hyperlinks on a page. There are three types of hyperlinks:

         1 The link itself: this is the link as it appears in its original color until it was visited by the user.

         2 Link selected: means the appearance of the link when the cursor rolls over.

         3 Visited the link: refers to the link that you visited at least once by the user.
To change the color of a hyperlink in each of its three States, click the color buttons. Use for quick selection color
palette, or yet, enter precise values code RGB, i.e. red, green and blue; you can also enter values for the
corresponding hexadecimal code.




To finish, then click the Save button.

Tip : When you construct a complex page, always note color links, funds cell numbers or tables that you create,
this will speed up the process of composition pages.


INSERT DATA FROM THE REFERENCING PAGE

It is possible to facilitate the work of search engine by specifying the keywords you want to see selected at a time
where people are searching.

To specify the metadata that you want to see be read by different search engines, open the page Properties by

clicking Properties      in the left menu. Properties (meta) referencing part choose language (French or English)
treatment as well as the type of metadata that own the information you wish to enrol.

You can choose between four types of metadata:




         1 Description of the content of the page.

         2 Keywords that characterize the content and that facilitate research prioritization of concepts.

         3 The identity of the author.

         4 The copyright owners.

When metadata is included in their respective check boxes, click Save.
Note : In metadata, avoid parentheses together with apostrophes. These characters may cause inconsistent results
because they are incompatible in some search engines algorithms.


CHOOSE PROPERTIES FOR HEADINGS AND PAGE BODY (CODE FREE)

This part enables you to directly enter the free code that you want to apply to different parts of your text, either:
the headers, body of page and page body OnLoad if programming is no longer a secret for you.




INSERT CONTENT INTO A SCRIPTOR WEB PAGE

As soon as you save the new page properties, content editor starts automatically: it displays the menu bar and
creates a new page to the right.

A blank input window appears then, and in its left upper end, the insertion point icon . Note that the title bar of
this page is a unique identification number. Scriptor, each page is numbered randomly at the time of its creation
from 1 to 999999; this number is - in addition to the title - an additional means of identification of the page which
you can use to find a page in the database of the Scriptor Web pages. From each insertion point, you can insert any
object publicised by the HTML protocol is: text, image, hyperlink, a table editor "wysiwyg" etc. Whenever you want
to add a new item in a page, click an insertion point: the bar menu to the left of your screen you can run different
operations (insert, copy, cut, paste) new elements (image, hyperlink, text, etc.) or edit them once created.
Click one of the tabs on the left menu to insert an element (text, image, hyperlink, etc.) and start building your
Web page.




INSERT A TABLE

To construct a table, click first on the insertion point , and then on the Table   in the left menu tab . The table
properties window opens, allowing you to assign the desired to your table properties.




Click the Save button: table appears on the screen in input mode.
Then click an insertion point    to add content in the cell you want.




Therefore, you can start building your page by inserting either:

                                    Object to be inserted          The menu bar icon

                                The rich text editor "wysiwyg".

                                            A table

                                           An image

                                          A hyperlink

                                      Anchor navigation

                                             Text

                                            Return

                                        A bulleted list

                                            A video



But before to insert some content whatsoever, it is always advised to determine the dimensions of the initial page
table because it as the model and it is for it that will be able to build all subsequent pages.

Tip : It is always easier to carry out the construction of a Web page from a table. A table provides precise key
elements graphical and textual Web page in each cell. For best results, determine the table width and the width of
each cell to provide a rigid and stable framework in which you can drop the items content. For example: If you set
the total width of the table to 760 pixels, the width for each column should never exceed this number: 200 pixels
to the first column (usually reserved for the menu) and 560 pixels for the second (reserved normally for other
relevant information).
EDIT THE PROPERTIES OF A TABLE

A table is a graphical framework in which insert the virtual elements Web page: image, text, hyperlinks, etc. To
build a very visually consistent, it should be specified graphical table properties: width, pixel (percentage), indicate
the values of the edges, borders, and specify the space occupied by the cells in a table view type. Includes table
cells, each cell has its own character (width, left-center-right alignment, background color, stroke, background
image); you can even insert a table into a cell.

To change the properties of a table, select it and click the Edit icon.




The choices offered by the drop-drag the slider on the action you want to perform. The pulldown menu allows to
modify general properties of the table all or those of the cell where you just click the Edit the Table . A choice of
action then offers to you.




When you click one of the menu items, Scriptor opens the window to perform the desired action and change the
properties of the selected object.

Tip : Ideally when we build a Web page, it should first create an array of 760 pixels wide (this corresponds to the
width of the screen to a resolution of 800 X 600, there should be 40 pixels to the width of the vertical scrolling strip
window). Then it determines the width of the table cells so that each one can be a reliable tag displaying; the sum
of each cell of a row may never exceed the total width of the table.
SPECIFY THE WIDTH OF THE TABLE

One popular tricks of the infographes is to delimit the graphics surface of the web page. You can do so by
specifying the table width, so you'll create a perimeter of constant work in which you'll submit all relevant
information (logos, images, titles, text, hyperlinks, etc.). Usually, the width of the table that receives the home
page is fixed at 760 pixels; this allows optimal display for monitors with resolution of 800 X 600 pixels leaving
horizontal space of 40 pixels that will be occupied by the vertical scrolling tape to the right of the screen. Whatever
your screen resolution, nevertheless align the financial Center, allowing you to obtain a balanced from the edges of
the screen display.

To specify the width of a table, click one of the icons change table to your page. In the drop-down list, choose the
table properties.




Then enter the width you want in the width; box if you want the table occupies a portion as a percentage of the
window display, leave the check %; if you want a pixel value, clear the %. Percentage is selected, the width of the
table box number must be between 1 and 100.




SPECIFY THE HEIGHT OF THE TABLE

To specify the height of a table, click one of the icons change table to your page. In the drop-down list, choose the
table properties.

Enter the height you want in the height; box if you want the table occupies a portion as a percentage of the
window display, leave the check %; if you want a pixel value, clear the %. Percentage is selected, the number of the
box height must be between 1 and 100.
Tip : It is not absolutely necessary to fix the height of a table. Current trends in computer graphics suggest that
most sites display a width defined, but that height, she, is variable and depends on the amount of content which is
deposited. In this respect, the site of Cyberpresse presents a graphical invoice closed in width, but open in height.


CHANGE THE COLOR OF BACKGROUND (SHADING) TABLE

To specify background color or shading of a table, click one of the icons     change table. In the drop-down list,
choose the table properties. In the table properties window layout, section if you want to add color to your table,
start by clearing the checkbox transparent.




Click on      order to open the color palette for a quick selection or even enter precise values code RGB, i.e. red,
green and blue by selecting the drop down lists for each color. You can also directly enter the hexadecimal color
code in the appropriate box.




If you change the color, press the Refresh button to see the chosen color. To finish, then click the Save button.



Note : use the same technique to change the color of the border of a table.

Tip : When you construct a complex page, always note color links, funds cell numbers or tables that you create,
this will speed up the process of composition of pages. When you want to emphasize the outline of a table, select
the color of the outline, and then add a few pixels to the width of the stroke (see determine the space between
the table cells ).
INSERT A BACKGROUND IMAGE IN A TABLE

You can also insert a background image by clicking     . You access and the search window to select an image from
one of your directories.




Verify the chosen image size, may resize the image in the appropriate format, and then click the ellipsis button
to transfer the image to your table.




DETERMINE THE ALIGNMENT OF THE TABLE ON PAGE

Alignment of the table in the page allows you to place the table left, Center or right of the screen; by default,
Scriptor always aligns a table on the left.

In the table properties window, deploy the alignment list, and choose the desired alignment: left, Center, right.




                                 And save the changes: table snaps into your page.
Tip : Centering a table is an operation that, aesthetically, helps your page to acquire a certain status to elegance
and efficiency in terms of Visual representation. As with the table of the homepage, for example, you ensure that
all information are correctly aligned to the center of the page, allowing you to balance the blocks of information,
regardless of the user's screen resolution. This is a graphical trend is observed today in most of the major portals.

A style has been created for your tables will make it possible to reproduce automatically by choosing the
appropriate drop-down list styles style.




FORCE SPACE IN CELLS

The function force space in cells was used by graphic designers in some primitive versions of browsers. It is the
introduction of a nonbreaking space ('nbsp' character) in the field of cell. However, it is hardly used today because
newer versions of browsers allow you to view content without specifying this element.

To leave an empty cell, click one of the icons change table    . In the drop-down list, choose the table properties.

In the table properties window, select space forced into cells.




Click the           button to keep the changes.


CREATE A BORDER

When it creates a border on a table, it required a strict framework easily identified visually. The border is a kind of
Visual perimeter used to graphically define the outline of a table. You can determine the width in pixel of this same
border that give it a color. If you choose to set the value to 0 (the default), Scriptor propelled not border around
the table; if you specify a number in the border section area, the border will adjust to the number of recorded
pixels width.

To specify the width of the table border, click one of the icons change table     . In the drop-down list, choose the
table properties.
In the table properties window, choose the desired border color, clear the transparency check box, and then
choose desired border size in the drop-down list: enter the desired width for the table border; defaults to 0 (zero)
indicates a lack of border and any other number indicates the width of the table in pixel border.




To complete the operation and to keep the change, then click the Save button.




                               A table with a border of 12 pixels and a blue outline.


DETERMINE THE SPACE BETWEEN THE TABLE CELLS AND CELLS

Determine the space in the table cells is a simple operation to release steam content in the cells in the taking off
the edge of the cell. It is an excellent technique to breathe content by creating real margins areas of text for
example. Thus, should be to create a register in the box heading value moderate (between 5 and 15 pixels for
example) in order to detach objects framework table.

To determine the width of the space in the cells and between cells in a table, click one of the icons change table
    . In the drop-down list, choose the table properties.
In the table properties window, choose the desired spacing pop-up each of the 2 lists: enter the desired width for
the Interior cells and around spacing; by default, 0 (zero) indicates that the objects are pasted on the edge of the
cell and any other number indicates the width of the space in and around the table cells.




To complete the operation and to keep the change, then click the Save button.


EDIT THE PROPERTIES OF A LINE

You can grant to a row in a table a particular graphical status by changing its properties. To determine the
properties of a line in a table, click an icon   Edit line to edit.




In the drop-down list, choose the line properties.
Then, in the line properties window, register values specifying the height of the line; you can enter a value in pixel
(default value) or a value as a percentage relative to the table (in this case, check the %). Then specify the type of
alignment you want to see in the line or the horizontal alignment (left, right Center) or vertical (high, medium,
low).




Then choose the color you want to see reproduce in bottom line: use the same technique described above under
the heading Insert in a page background color.

Finally, click the Save button.


EDIT THE PROPERTIES OF A CELL

Cell is the basic unit for graphical objects that come furnish space Scriptor page guides. While you could publish a
picture or text in a page without forcing them to live the framework of a particular cell, but thus published object
will always arranged in the same place, that is aligned at the top on the left margin of the page. To get an
interesting aesthetic result may increase readability criteria, it should be specified cell properties allowing them to
effectively have the content they are preparing to welcome.

To change the properties of a cell, click the Edit the Table icon   in the cell to change.




In the drop-down list, choose the cell properties.
Then, in the cell properties window, enter the values you want for each property you want to change. Thus you
can change:

         1 dimensions: height and width of the cell in pixels or percentage of the table.

         2 alignment: horizontal (left, Center, right, justified) and vertical (low, medium, high);

         3 shading: color and picture background.

         4 merging cells.

         5 color of the cell borders.

Note : Cell properties always outweigh the row and table properties. Thus, the background color of a cell will come
to hide the row and the table.

Finally, click the Save button.


HEIGHT AND WIDTH OF A CELL

The width and height of the cell automatically adjust and reflect the dimension listed in the table and the contents
of the cell properties. However, you determine correct values for width or height cells to compel them to fill in the
table width, and height accurate. For example, in the large table page framework whose width would have been
fixed at 760 pixels, it will be useful to specify the width of the cell receives the logo of corporate image (the cell in
the left corner at the top of the page) by assigning the same width as the frame, example 200 pixels for 560 pixels
for the cell on the right; the total number of pixels to the two cells in the first line must match the total number of
pixels previously determined for the width of the table

To change the properties of a cell, click the Edit the Table icon    in the cell to change




In the drop-down list, choose the cell properties.
Then, in the cell properties window, enter the values you want for each property you want to change.




The default values for width and height of the cells are set to 0 pixels; they thus automatically adjust the
dimensions of the object that you insert. Although the text is compressible, images they aren't; they take therefore
any place cell regardless of the size it has indicated unless it has chosen to reduce proportionally. Moreover,
images are répéteront tiled both and also that the surface of the cell will allow. In fact, it is important to make a
perfect symbiosis between all objects in a table in accordance with the following principle: the sum of the value of
horizontal cells in a row must never exceed the value of the width of the table.

Tip : It is sometimes important to determine the width of the cell based on the exact dimensions of the object that
it inserts: for example, a cell in which you insert an image with a width of 120 pixels should be adjusted to the
same value; then type 120 in the "width of the cell" field.




In the window on the left, a table has been placed in the center of the window; column 1 is 40% of the table,
column 2 occupies 20% of the table, and column 3 default is 40% of the table for a total of 100%.

Finally, click the Save button.


CELL ALIGNMENT

To determine the horizontal and/or vertical content cell alignment, click on the Edit the Table        in the cell to
change icon.
In the drop-down list, choose the cell properties.




In the properties of the cell, window choose from the dropdown choices horizontal and/or vertical alignment you
want. By default, objects are placed in the Center, to the left of the cell.




Finally, click the Save button.

Tip : Horizontal alignment causes have cell objects exactly where you want. If you want to Center a title, choose
alignment "Center"; If you want to move an image or document merged upwards, choose vertical alignment "top"
Apply generally aligning 'centre' and when you want to Center a title for example. "High" alignment will allow
pasting objects as merged menus or text sought to see quite match the upper limit of the cell areas.




Online profit result in edit mode


INSERT A BACKGROUND IMAGE, AND CHOOSE A FRAME

To insert a cell background image or reveal a frame in a cell, click the Edit the Table icon   in the cell to change.
In the drop-down list, choose the cell properties.
To insert a frame color, click the find    area fill background button and follow the same process as described in
Insert in a page background color. To view the color, clear transparent.




To insert a background image, in the background fill area click on the button            Search Insert a background
image to identify the location of your image.




Then follow the instructions described in the Insert Picture to deposit cell background image of your choice.




Don't forget to complete the operation by clicking the Save button.

Tip : When you add a background image in a cell, this image will repeat indefinitely. If you insert a picture on
grounds of small dimension, you will then have the surprise of even your image it repeats tiled both and also that
the surface of the cell will allow. To avoid that an image is repeated to infinity, enter precise values like width and
height of the cell: these values are usually those of the image to insert.




The table below is a table whose width was suckled set to 250 pixels. In column 1, the image is the same dimension
as the cell, it prints only once. In column 2 of 125 x 125 pixels image repeats tiled to fill the cell
MERGE CELLS

You can merge cells in a table on a horizontal axis. To do this, we must, however, that a cell has been
previously cleared from the table; the merge operation then resumes table in all its original perimeter
allowing new cell merged to behave like a cell stand-alone wider than other cells of the table.




To merge cells in a table, click the Edit the Table  cell you want to merge icon. In the properties of the cell,
window register the number of cells to merge in the width box. The new cell now occupy an equal width number
of cells that you specified.




Table with column 2 of the first line has been merged cell absent from the column 3

Then click Save.

Note : Merge cells is important when you want to build the homepage template and frame any page; remove a cell
in the table and merge with the missing cell: table will rebuild according to perfectly functional and aesthetic
forms. When you merge cells, it is important to reset the width of the cell merged so it acquire the missing cell
properties. So, edit the properties of the new cell must be merged by adding the width of the cleared cell.
CHOOSE THE BORDER COLOR

For the color of the border of a cell, click the Edit the Table cell that you want to change the border color icon.
In the drop-down list, choose the cell properties. Then, in the cell properties window, choose the border color and
follow the same process as described in Insert in a page background color. Clear transparent to use color.




Finally, click Save.


INSERT A TITLE, INSERT TEXT



To insert text (title, note, text, etc.) click an insertion point.




Then click the text      in the left menu tab.




In the text properties window, appears a wide blank: this is the area of seizure. Type - or paste - the text you want
to insert into the cell of the Web page.

Then choose this text box formatting properties (font, size, color, justification, bold, italic, and style). Choose the
font, the size of the characters and the default color applies to all of the characters in the input window, but to
change the properties of some characters only, you must first select them; then, click the appropriate button. To
confirm your choice and save your text, click the Save button.




Note : Example on the left, selected characters will be processed in bold at the time of displaying the Web page.
You can justify all text by clicking the checkbox full justification, but to Center a title, please refer to the topic cell
alignment .




Note : Note here the tags which automatically fall between the selected characters to bear the chosen stylistic
marks: do not delete! They will disappear itself generating text in the display window. Indeed these characters
disappear in favour of their characteristics as soon as to save you your changes by clicking the Save button.



To insert another text in another cell, select a new insertion point     , again select the text from the left menu tab,
and do as previously described.

Type or paste the text, and then determine the layout settings. Finally, never forget to click the Save button to
save the changes.


CHANGE THE FONT AND/OR THE FONT STYLE

To change the police and/or the style of the font, click first icon Edit text.
In the properties of the text box, do you want stylistic choices by deploying the appropriate drop-down lists.




Note : When you choose a default color and/or font, this choice applies to all characters in the text box. The font
selection applies to all of the characters in the input window. However you can change the stylistic attributes some
of the text by selecting it and choosing other properties (bold, italic, color).

Finally, click Save to save the changes.

The default Scriptor displays the properties selected in the Preferences (see this topic).

Tip : A table to arrange elements of a Web page in a master construction rigorous. Allows images and text entries
to coexist in a harmonious and balanced way.


CHANGE THE COLOR OF THE TEXT

To change the color of the text characters, click the Edit text icon first. In the properties of the text box:




    1.   Choose default color for all text by clicking the Search button; select your color in the color selection
         window, use the palette for quick desired color selection or even write accurate RGB, i.e. red, code values
         green and blue in the respective; boxes you can also use the values of the HTML code (number leading
         sign #). The selected color appears in the square of color selection. To finish, then click the Save button.
    2.   To choose the color of some characters only, first select these characters in the text input window then
         click the Search button      ; select your color in the color selection window, use the palette for quick
         desired color selection or even write accurate RGB, i.e. red, green code values and blue in the
         respective; boxes you can also use the values of the HTML code (number leading sign #). The selected
         color appears in the square of color selection. To finish, finally click on the button Save; then in the
         properties of the text entry window, click the selection rectangle.




Color tags deposited before and behind the selected string. Click the Save button to enjoy the result.




                          Result of such changes generated by the editor in the Web page


CREATE A HYPERLINK

Create a hyperlink, click first on the insertion point corresponding to the desired location for the insertion of the
link. Then click on the link in the left menu tab.

LINK TYPES

In the hyperlink properties window, name the link by entering its name in the link name box. Determine the size of
 the characters in the link from the menu dropdown, choose if there should be in bold or italic and pull down list to
    select the font. The name you give to this link will appear by default in the webpage in blue and underlined.
You can also prevent the underline, by clearing link without underlining, and assign the desired link style by
selecting it from the dropdown choices.




Then choose the type of object on which rests the link among the suggestions of the drop-down list:




        1 Site address: points to a different website                   whose   address   starts   with   http   (e.g.
        http://www.groupeebi.com); opens the page in the site.

        2 Document: opens a document .doc, .pdf or other (allows to open a document previously filed in a
        Scriptor directories).

        3 Page Scriptor: opens a Scriptor page (this page is often identified by a number).

        4 Archives (publishing): displays the page Archive published.

        5 Electronic document management: redirects the visitor to a specific point of the documentation centre
        (opens and displays the contents of the DGs folder).

        6 Newsgroup: opens the homepage in a newsgroup.

        7 Anchor: moves the tape at the beginning of a previously marked line an anchor navigation scroll in a
        Scriptor page.
        8 Mailing list: displays the latest releases of a mailing list.

        9 Flux RSS: displays a WEB page in real-time.

        10 Hyperlink Scriptor: document a Scriptor directory

        11 Personal account: document contained in a personal directory.

        12 Print this page: starts printing the page using the framework printing.

        13 Manage this page: opens the page in the management mode and displays the Toolbox.

SPECIAL PROPERTIES FOR HYPERLINKS

Scriptor provides sophisticated management of hyperlinks to modulate different ways access to information on
your website or portal. Not only can you create links that are stylistically, typographiquement harmonious and
effective, but above all, you can allow the player who goes through your portal to view different types of
documents. Among peculiarities characteristic management hyperlinks, creating a link without underlining to
propose an original visual appearance while link function save and publish contribution provides all functions of
the publication module to announce the publication of a new page, users a new document, a new image, etc.
CREATE A LINK WITHOUT UNDERLINING: A LINK TO TWO STATEMENTS

 If you want to create a link with no underline, i.e. a link to two non-underlined statements that changes changes
  color at a time where you move the cursor, open properties of the hyperlink, click link without underline box.




You can harmonize the two statements link by selecting their respective color. To change the color of the link, click
on the Search button       , and then apply the technique of color choices as described such topic described such
topic as described in

CREATE A LINK TO ANOTHER SITE

Choose the insertion point that corresponds to the location of the link to create a link to another site, click on
click on the link   in the left menu tab. In the hyperlink properties, window select site address in the link type
list box, and type the full address of the site you want to achieve in the area of text such as, for example:
http://www.groupeebi.com.

Choose whether to display the target window in another window, specify its dimension and its attributes, click the
Save button
CREATE A LINK TO A DOCUMENT

To create a link to a document .doc, .pdf, .xls, etc., choose the insertion point     that corresponds to the location
of the link and click on the link in the left menu tab    . In the hyperlink properties, window select document from
the link type drop-down list.

Depending on the location of the document you want to display, you are one of the following ways. But before to
start the operation, register the name of the link in the link name text box.

(1) Create a link to a document already listed in Scriptor

If the document you want to achieve by hyperlink is already listed in a Scriptor directories which you assume
management, click the Search button.




You then access the directories management window. Expand the Management directory - list in manage
directories - window in order to view the contents of the desired directory.




Continue your search until you have selected the correct current directory. Navigate to your document and click on
the Select document.
Return in the hyperlink properties window, notice that the file path is part of the link type box. If it is not already
selected, enter the name of the link in the link name box, choose the size, the type of window target, and the
flying window properties if it is necessary. Exit by clicking Save.

(2) Create a link to an external document (network, server, hard drive, etc.)

If the document you want to make it accessible by hyperlink is not present in a Scriptor directories, you must first
import it in order to view it later. To do this, pull down list of the directories management in order to show the
correct directory of deposit. When your drop directory is selected, click the Browse button in adding a file tracking
the location of your file on your hard disk.




Select the document using the procedure for your operating system selection: you can either double-click it or
select it and open it after it is selected in the list of available files.




Immediately after the operation completes, directories window will be displayed again and the location of your
document will be automatically entered in the title box. You just to drop it by clicking the Add button.
The submission of the file on the server may take some time because of its size. Scriptor makes downloading your
file in the chosen directory. Downloading a file, a window tells you the status of the progress of the transfer of
information. You want to interrupt the process by clicking Cancel the download. This window will automatically
clear at the end of the transfer.




Then locate the newly imported document and click the Select the file icon.




The property of a hyperlink window appears again by entering the path of the document, register if it is not
already selected the name of the link in the link name box, choose the link type, its size, the window target, its
dimension type, and exit by clicking Save.




CREATE A HYPERLINK TO A SCRIPTOR PAGE

To create a link to a document .doc, .pdf, .xls, etc., choose the insertion point     that corresponds to the location
of the link and click on the link in the left menu tab    . In the hyperlink properties, window type the name of the
link, choose whether it is appropriate to insert a link with no underline, select Page Scriptor in the link type; drop-
down list, and then click Search.
Locate the Scriptor desired page by navigating among pages offered by the Scriptor pages search tool. Work in
normal mode or in Tree view. See the topic find document for details on the find function. Finally, confirm your
selection by clicking the Save button. You can also directly enter the document number in the appropriate box.

Tip : By clicking the right mouse button on the page, and then properties you have access to the page whose sound
properties #. Editor document pages are randomly numbered from 1 to 999 999 at the time of their creation. If
you locate the page number directly and you write down it in the page number box, you'll save the time normally
spent on Search page.

LINK TO THE PAGE OF A PUBLICATION ARCHIVE

When you create a link to the page of archive published

To create a link to the page of archive published, choose the insertion point     that corresponds to the location of
the link and click on the link in the left menu tab   . In the properties of the hyperlink, type a name for the link,
choose whether it is appropriate to insert a link without underlining select Archive (publication) in the link type;
drop-down list, and then click Search.
See the topic find document for details on the find function.

LINK TO THE ELECTRONIC MANAGEMENT OF DOCUMENTS

To create a link to electronic management of documents in the DG, choose the insertion point     that corresponds
to the location of the link and click on the link in the left menu tab . In the hyperlink properties, window type
the name of the link, choose whether it is appropriate to insert a link with no underline, select electronic
documents in the link type; drop-down list, and then click Search.




Deploy the DG to the document or folder target and click the icon of the document or folder selection according to
your choice (the small blue triangle pointing to the right).




Hyperlink properties window returns to the forefront, choose the target window and open content in another
window by specifying its size if there is, finally, to confirm your selection by clicking the Save button.
Note : You can point to any of the objects in your DG: page Scriptor, image content directory, etc. The new window
opened by the link will display the DG deployed to the chosen target; you can then navigate through the DG
exactly as if you deployed yourself the DG management tool.

CREATE A LINK TO A DISCUSSION GROUP

To create a link to a discussion group, choose the insertion point      that corresponds to the location of the link
and click on the link in the left menu tab . In the hyperlink properties, window sign up link, name choose
whether it is appropriate to insert a link with no underline, select newsgroup in the link type; drop-down list and
click




Locate the Scriptor desired page by navigating among pages offered by the Scriptor discussion groups search tool.
Please refer to section find document for details on the find function. Select the newsgroup you want by clicking
the Select button.




Finally, confirm your selection by clicking the Save button.

LINK TO AN ANCHOR

The anchor is a highly specific target that you can insert into a Scriptor page link. It allows to browse webpages
right dimension quickly reaching a specific point (such as beginning of paragraph for example) and back to top or
bottom page on click to continue.

The anchor type hyperlink takes you to an area read designated without having to use the scroll bar. On an anchor
link enables faster navigation and suggests a clipping content to encourage according to its main parties thematic
fast, efficient reading. It forms the basis for an intrapaginale navigation.

Thus you can have multiple anchors on a page, just before subtitles paragraphs or major subsections of your plan,
complete with a hyperlink to rewind to the top. Navigation models and fast moving page routes are infinite as it is
true that anchors set allows not only to accompany the large blocks of page contents but also to allow the trade-
off is blithely walk there.

In addition, can, using a simple technique, go to another page as the source page anchor; this procedure can then
be used to author Web page direct its drive to a specific point on a second page into a kind of navigational
accuracy.
INSERT AN ANCHOR ON THE PAGE

Create a hyperlink to an anchor, you must first put this locator page somewhere that you think is strategic. Locate
the insertion point   that specifies the point to achieve, and then click the anchor     of the left menu tab.

In the anchor properties window, enter number of anchor with a characteristic name. You can also register a
number of anchor at will; but if you do not, Scriptor in assigned a randomly.




The     icon then moves in the page. And, then select the insertion point that corresponds to where you want to
create the hyperlink to an anchor.

INSERT A HYPERLINK POINTING TO AN ANCHOR

In the hyperlink properties page, enter the name of the link and select anchor in the link type drop-down list.
Locate the name of the anchor in the drop-down list that appears to the right of the list of links. Anchor drop-down
list displays the names of all the anchors of the current page.




Select the appropriate anchor and click the Save button.

CREATE A LINK TO ANOTHER PAGE ANCHOR

You can create a link to another Web Scriptor page anchor. To do this, do as previously by choosing Page Scriptor
as the link type. Then by entering in the page number, the number followed target page area a number sign and
number of anchor as for example in the following example: 231320 # 1.
Complete the operation by clicking the Save button.

CREATE A LINK TO A MAILING LIST

To create a link to a mailing list, choose the insertion point   that corresponds to the location of the link and click
on the link in the left menu tab.

In the hyperlink properties, window sign up link, name choose whether it is appropriate to insert a link with no
underscores. Select mailing list in the link type drop-down list. Specify the type of object that is the mailing list.
You can create a link to five type corresponding to the following mailing list: electronic document management,
discussion group, publishing, mailing, list in the drop-down list that appears to the right of the link types and page
Scriptor.




And then click Search.




Locate the object you want by browsing through the Scriptor search tool. See the topic find document for details
on the find function.

Select the checkbox Select desired publication. Click Save.




Finally, in the window confirm your selection by clicking the Save button.
CREATE A LINK TO A RSS FEEDS

To create a link to a RSS feeds, choose the insertion point    that corresponds to the location of the link and click
on the link in the left menu tab.

In the hyperlink properties, window sign up link, name choose whether it is appropriate to insert a link with no
underscores. In the link type drop-down list, select RSS feeds. Specify the type of object that is the RSS feeds. You
can create a link to two type corresponding to the following RSS feeds: electronic document management and
publication, in the drop-down list that appears to the right of the link types.




And then click Search.

Locate the object you want by browsing through the Scriptor search tool. See the topic find document for details
on the find function.




Select the checkbox Select desired publication. Then click Save.




Finally, in the hyperlink properties window, confirm your selection by clicking the Save button.
CREATE A LINK TO A HYPERLINK SCRIPTOR

To create a link to a hyperlink Scriptor, choose the insertion point    that corresponds to the location of the link
and click on the link in the left menu tab       . In the hyperlink properties, window sign up link, name choose
whether it is appropriate to insert a link with no underline, select hyperlink Scriptor in the link type; drop-down
list, and then click Search.




Locate the Scriptor desired page by navigating among pages offered by the Scriptor hyperlinks search tool. Please
refer to section find document for details on the find function.




Select the desired Scriptor hyperlinks by clicking the Select button.
Title hyperlink will fall under the link type box.




Finally, confirm your selection by clicking the Save button.

CREATE A LINK TO A PERSONAL ACCOUNT

To create a link to a personal account, choose the insertion point     that corresponds to the location of the link
and click on the link in the left menu tab . In the hyperlink properties, window sign up link, name choose
whether it is appropriate to insert a link with no underline, select personal account in the link type; drop-down
list, and then click Search.




Locate the document you want by browsing among pages offered in the Add a Scriptor page. Please refer to
section find document for details on the find function.
Select the desired page by clicking the Select button.




The page number will fall under the link type box.




Finally, confirm your selection by clicking the Save button.
CREATE A LINK TO PRINT THE CURRENT PAGE

To create a link that starts printing the page in its framework print, choose the insertion point   that corresponds
to the location of the link and click on the link in the left menu tab.    In the hyperlink properties, window enter
the name of the link (usually print page), choose whether it is appropriate to insert a link with no underline, select
print this page in the link type; drop-down list, and then click Save.




Note : Print this page link must be placed in a page whose content is linked to a frame page to print. Thus, print
only primary page content unless menus or banners come increase the printed page. Usually, this is a link that is
registered on an image for example such small printer.

CREATE A LINK TO MANAGE THE PAGE

To create a link to enable all tags work a Scriptor Web page, choose the insertion point    that corresponds to the
location of the link and click on the link in the left menu tab  . In the hyperlink properties, window sign up link,
name select manage this page in the link type drop-down list, choose whether it is appropriate to insert a link with
no underscores.
Finally, complete the operation by clicking Save.

Note : This type of link allows you to quickly switch the current page edit mode. This is a link that may be used
more readily on an image which would explicitly hide information passage in edit mode. Of course, you will have
access to edit mode only if you have rights management of the concerned page.

BE OPEN IN ANOTHER WINDOW (A FLYING WINDOW)

To open the page information hyperlink destination in a flying window (a window which is superimposed on the
main window without completely hide it), click the appropriate box, and then choose new flying window pixel
format.




The target window superposera to each other by appearing in the foreground format 640 x 480 pixels.

It is important to view content hyperlink in a new flying window whenever you want to keep track of the original
window, the source, this manoeuvre window has the effect does not hide the track navigation suggested by the
original window.

Here are the properties that you assign to the new flying window:

         1 Window width (the % check to show as a percentage of the window source; otherwise the window with
         a width in pixels).

         2 Height of the window (the % check to show as a percentage of the window source; otherwise the
         window height in pixels).

         3 Menu: Select to display the navigation menus.

         4 Status: Select to display the status of the flying window.

         5 Standard: select the checkbox to display in standard mode.

         6 Address: Select to display the page address bar.

         7 Resize: check box to allow user resizing flying window.

Note : If you want to change an existing hyperlink, click hyperlink. You can then edit each of the properties of the
link by changing it in the hyperlink properties window.
INSERT A PICTURE: GENERAL INFORMATION

To insert an image, click on the insertion point      corresponding to the desired location.

Then click on the image      of the left menu tab .




The image properties window opens and enables you to determine the set of properties for the image you want to
add to your Web page. This window gathers all of the properties of an image inserted in a Scriptor page. You can
enter a name (displayed automatically in ToolTip when you slide the slider), determine if it an image to two
statements, set the dimensions of the image, to determine the alignment, make a hyperlink, to determine the
target and, finally, decide whether or not linked to the page hyperlink opens a flying window. You can then specify
the dimensions of the window and determine its Web components (View menu, address, etc.)
To choose your Scriptor page image, two scenarios work are available to you:

(1) if the image already exists in one of the directories of Scriptor, you select in the appropriate location and click
Save to confirm your selection.

(2) if the image does not exist in a Scriptor directory, you must import it by Browse and deposit it in a directory
management that you have access (e.g. the images directory). Each page of Scriptor has a default directory in
which you can file a images; it's a directory with the same number that the page so as to import your image, you
can choose to deposit it, in the page file or in the images directory.

Note : Rather than save the image in the page file, it is best to save this image to a physical directory (e.g. images)
in due form. So the image can be shared by other users who have access to the same directory of images that you.
Moreover this image is not likely to be deleted by mistake never delete page.

To import an image, name the image in the image name box and click Search to open directories Management
window.




Then do one or the other method described below.

INSERT AN IMAGE FROM A DIRECTORY

To insert a picture which already exists in a directory, locate in window Management directory, the directory that
contains your image by deploying the drop directories management accessible.




(1) Select the directory management

Then, choose the desired image: in the current contents of the directory by clicking the          icon Select this file
corresponding to the image window.
(2) Select image file

The location of the image is part of the zone image by defect.




Then choose other properties if it is necessary (dimensions, layout, hyperlink, etc.), and then click Save.




Your image exactly settles at the insertion point chosen.
Note : If you want this image to become a two-state image, see Insert an image in two States . If you want to
create a hyperlink to this image, select the link type in the drop-down list and enter the address of the link.

IMPORT AN IMAGE TO INSERT IT

To insert a picture that does not yet belong to Scriptor directories, you must first import it. Follow these same
steps described previously (choose an insertion point, click the insert image icon, choose the directory in which
you want to store your image from the drop-down list, and then click the Browse button).




Locate and select the image you want on your hard drive, USB key or your network,




Then click the Add button.
When image will have been transferred to the selected directory, it will appear in the list of available objects of the
directory, click the triangular selection file icon, and then click Save. (For a complete description of the
manoeuvre import, see drop a document).




INSERT AN IMAGE IN TWO STATES

An "image to two States" means effect of rollover created during a rollover image insertion technique cursor
                                        3
corresponding to the desired location. . This interim change image status occurs when you specify a hyperlink for
this image. To insert an image in two States, click first on the
3
 "Statuses" image such that we mean here might also be called a rollover i.e. image one "image displayed on a webpage, which
change appearance (color or shape) in only one passage of the mouse pointer that is when it rolls over the original image.

Then click on the image of the left menu tab .




Then, insert a first image in the default image checkbox, and a second image in the image 2-State checkbox.
To avoid problems of graphic harmony, choose two images of the same size to create a two-State for example
button. And finally, to save your selection in the image properties window.

The picture that you insert is used to Activate a hyperlink. Insert an image window choose the type of link that
you want to create, specify the name of the link and proceed with his registration either in indicating the link
address, the Scriptor page number or location in a Scriptor directory name.




Use the search function and apply techniques tagging and import documents or images as described in the
following topic: find document.

Tip : Note that the property of the image window provides the layout option. This allows you to introduce a
horizontal spacing or vertical pixel or create a border around the image; if you want to center the image, see
change the properties of the cell.




By clicking the image in two States, the trade-off is directed to the page, site, or the chosen document. Finally, to
open the target page in a new window, select open in another window. Specify the width and height in the entry
fields.




TYPES OF LINKS TO THE IMAGE IN TWO STATES

A link to two States can point to different objects: they are listed in links type drop-down list. Choose from
suggestions from the drop-down list the type of object on which rests the link:
         1 Site address: points to a different website                     whose   address   starts   with   http   (e.g.
         http://www.groupeebi.com); opens the page in the site.

         2 Document: opens a document .doc, .pdf or other (allows to open a document previously filed in a
         Scriptor directories).

         3 Page Scriptor: opens a Scriptor page (this page is often identified by a number).

         4 Archives (publishing): displays the page Archive published.

         5 Electronic document management: redirects the visitor to a specific point of the documentation centre
         (opens and displays the contents of the DGs folder).

         6 Newsgroup: opens the homepage in a newsgroup.

         7 Anchor: moves the tape at the beginning of a previously marked line an anchor navigation scroll in a
         Scriptor page.

         8 Mailing list: displays the latest releases of a mailing list.

         9 Flux RSS: opens a page containing an RSS feed.

         10 Mailing list: opens a window for the user to directly subscribe to a mailing list

         11 Hyperlink Scriptor: document a Scriptor directory

         12 Personal account: document contained in a personal directory.

         13 Print this page: starts printing the page using the framework printing.

         14 Manage this page: opens the page in the management mode and displays the Toolbox.



For more details on the types of objects and the special procedure to choose them, review all of the instructions
mentioned above in relation to create a hyperlink.


CREATE A MENU

Menu editor is a user-friendly tool for automatic creation of drop-down menus. The titles of the menu always
appears in a rectangular area surrounded by a border; can determine the color and width of the border as well as
the background color; titles can also be aligned according to the position desired (to the left, right, top, bottom of
the box display). Editor to therefore, without programming, to create hierarchical menus and set the main Visual
attributes: font, size and color of the title, the first State and the second State background color choices (hover
position, title displays a second State); can even insert a picture to symbolically locate track navigation. In short,
menu Manager allows an exceptional refinement in the Visual presentation of menus.

In addition, a menu can be positioned anywhere in a Scriptor page. Can also reveal several menus: for example can
display a menu vertical positioned to the left or right of the page in navigation placed in the header or in a cell at
the place designated by the designer of the Web page, etc. ribbons
A menu offers therefore a hierarchical entity (the menu shows divisions comprising a series of nodes), dynamic and
stable whose elements point, depending on the choice of the user, to:

         1 an internet address (URL).

         2 document (.doc, .xls, .ppt, etc.).

         3 a Scriptor page,.

         4 archives published.

         5 newsgroup.

         6 the DG level.

CREATE A MENU: WAY FORWARD

Create a menu is a simple operation that involves quickly eleven steps:


         1 In the Scriptor menu bar, click the Edit tab     , and then click menu

         (2 Create a new menu, name it, and fill out different fields window Preferences menu).

         3 Then determine the graphics preferences and save the changes.

         4 Create a first division and appoint; possibly change the graphic attributes Division.

         5 Specify target Division at the time of the click: page Scriptor, group discussion, document, URL, etc.

         6 Then add a second division, a third, etc.

         7 Choose the insertion of the first node and create it.

         8 Specify the target node at the time of the click by the user: page Scriptor, group discussion, document,
         URL, etc.

         9 Graphics preferences node.

         10 View and generate the menu.

         11 Merge menu in the Scriptor Web page.

OPEN THE MENU EDITOR


To create a menu, click the Edit tab       , and then click menu in the navigation bar Scriptor.
In the management of the menus c then lick the button Add menu window.




The menu properties window appears: then specify all the properties of the menu in designated entry fields and
specify the name of the menu.




Note : For the purpose of this demonstration, we emprunterons example building a menu on a menu with French
literature as a model for building a menu type model. Literature proposes a cutting knowledge which served well
by literary history, provides a hierarchical breakdown according to centuries, literary currents, authors, etc.

Later, you can review, modify, and edit each property of a menu by recalling the Properties window by clicking the
button Edit Properties menu accessible from the window menu.




To change the Properties menu, click the Edit icon

DETERMINE THE PROPERTIES OF THE MENU

In the properties of the menu window, choose the General visual characteristics of the menu you create; this
allows you to determine at the outset the main Visual settings, constants eliminating later do for each new entries.
Therefore, you can establish the constants stylistiques menu. Please first determine the General properties of the
menu itself, then specify those of the divisions and, finally, set the properties of the nodes.

GENERAL PROPERTIES OF THE MENU

Here are the different General properties of a menu; you can determine these settings before even starting to
build the menu as such with his titles and its subtitles.

         1 Name menu: Specifies the name that identifies the menu, this name is again in the list of menus when
         performing a search.

         2 Vertical Menu to define the meaning of the progress of the menu box.

         3 Border size: lets you specify the width of the border that frames the menu items: the titles of the menu
         always appears in a rectangular area surrounded by a border.

         4 First node is an image box (check when the first node is a graphic element).

         5 Border color: indicates the color of the stroke of the sidebar; to choose the color of the border, click the
         change button and proceed according to the usual selection of colors Protocol in Scriptor.

         6 Spacing: sets spacing horizontal and vertical title from the border.

         7 Width icon: Specifies the maximum width of the icon in the menu.

Also change if there are values for each graphic variables divisions and nodes.




Menu properties window. Enter the relevant information in the appropriate fields

then save the data to create the menu of your choice.
CREATE A NEW MENU: PROVIDE A TITLE AND CHOOSE PROPERTIES

First everything first register the name of the menu in the menu name text box. Specify the size, background color
of the menu, the alignment and spacing of titles from the border (a few "pastes" the title on the border, a higher
number creates a space.) Also determine the width of the icon; this value lets you specify the total width occupied
by the icons used in the menu (not to specify the default width would mainly zigzag menus if used images do not
have the same dimension); the default spacing and width of the icon values are set to 0 pixels.




Tip : You can quickly create a menu by specifying any straightaway sequentially all layout parameters set by your
graphic layout: specify upon creation of title all these setting in the menu properties window. Then quickly do
according to the plan of the DG of your site. Finally, bind each element (nodes divisions and) to any of its content
to which they point. This can be done sequentially, title by title, or at the very end by checking the relevance and
the proper functioning of the links.

PROPERTIES OF DIVISIONS

The divisions are top-level logical joints. They collect nodes, which combine elements of content to which they
point. The title divisions may point to objects or, again, be hidden, allowing to make them invisible to immediately
display the underlying nodes; this allows to take advantage of functional nodes and stylistic features without
having to view those Division.

The Properties window of a division includes the following:

        1 Hide title box: this box is used when you want to remove title Division while displaying the title of each
        node; this option is used when using the menu in a horizontal banner or graphic when it wants to take
        advantage of properties of nodes without displaying those Division stylistiques purposes.

        2 Size instrument Division (choose from the drop-down list) and font (choose from the drop-down list),
        bold and italic character.

        3 Align title box title (to the left, right, Center).

        4 Font choice: pull down menu to choose the font already installed in the system - see Installing fonts in
        the Preferences menu.

        5 Division title font color: click the change button to change the color.

        6 Background color of the title box.

        7 Choice style sheet (when a style sheet is installed in the system - see the installation of a style sheet in
        the Preferences - menu can use the properties of a style to apply to the division title.)
        8 Road ahead (the address points to which the title) to reach the target.

        9 Target document type: you can choose between six types of link: address Web, .doc, .xls, .ppt, etc. page
        Scriptor, document archive, group discussion or tree.

        10 View page target: new window (check) or view in the same frame. If you choose a new window, you
        can choose the size of the window (specify the number of pixels to specify the width and height of the
        new window).

        11 Choice elements of the new window: check box to display the menus, the address bar, the bar status,
        the standard buttons or to resize the window.

        12 Icon choices: you can browse to choose a small icon images directory which would add to the division
        title text. (Apply the technique to Insert an image).

        13 Width divisions: determine the width of the divisions.

        14 The box line break: by selecting this checkbox, A line will be automatically inserted between each
        divisions.




PROPERTIES OF NODES

Graphical properties of nodes are:

        1 Title font size and choose the attributes (bold or italic) Division.

        2 Align title box title (to the left, right, Center).

        3 Choices for the font (pull down menu to choose the font already installed in the system - see Installing
        fonts in the Preferences menu).

        4 Choosing the style sheet (if a stylesheet is installed in the system - see the installation of a style sheet in
        Preferences - you can use the properties of a style to apply under division.

        5 Box title background color (color of the first State and the second State when the cursor hovers over
        the title).

        6 Choice style sheet (when a style sheet is installed in the system - see the installation of a style sheet in
        the Preferences - menu can use the properties of a style to apply to the division title.)
        7 Road ahead (the address points to which the title) to reach the target.

        8 Target document type: you can choose between six types of link: address Web, .doc, .xls, .ppt, etc. page
        Scriptor, document archive, group discussion or tree.

        9 View page target: new window (check) or view in the same frame. If you choose a new window, you can
        choose the size of the window (specify the number of pixels to specify the width and height of the new
        window).

        10 Icon choices: you can browse to choose a small icon which would add to the division title text.

        11 Arrow choices: lets you choose the arrow icon in the image directory.

        12 The private box: reserve exclusive reading page target secure group.




CREATE A FIRST DIVISION

After you entered the name of the menu and save its properties, window menus appears on the screen, displaying
the list of menus which you are the Manager. Click on the management of its divisions and its nodes menu icon to
display the window menu.
Then click the Add a division at the start icon in the menu window:




Put Division title in the title property Division window box. If the menu Properties Division us more satisfied,
change it if necessary. Otherwise, immediately click on the Save button.




You can add burst as many divisions you want. Facilitating operation quick entry, Properties Division remains open
both window and also you long make insertion of new divisions in the menu. You can then, for each of the new
divisions inserted, change the field properties or, later, by changing any of the usual properties.
Click Edit Properties Division to fine-tune the view menu.

Add others before or after clicking the icon Add a front division or Add a division after divisions.




Click on the icon to add a division after or before another division.

You can easily compose a single line all the hierarchical reinforcement of your menu.

Note : Division, as a node, can be attached to a target page (Web page, page Scriptor, etc.). But a division, unlike a
node, can never deploy anything but nodes. A node may have divisions; Conversely, a division can only include
nodes. A node becomes something of a beam that can bring together on title divisions, and other nodes
navigation. A node is more dynamic than a division that only that pause in the hierarchical menu. A node can will
animate, change status and Mark pitch, indefinitely, to other divisions, other nodes.




Menu not deployed as it appears on the screen.




When the cursor rolls over 'First node' title, it animates and unfolds.




The slender deploys so all structure by leaving all visual characteristics
CREATE A NODE

A node is a point of internet navigation, it's a kind of hyperlink in a way which is registered in a stable manner in
the structure of your site navigation. It gathers a beam of organized meaning able to unfold in dynamic structure. A
node can appear as a logical Digest deploying access to items in a menu which will prove when mouse 1.58.

To create a node, locate the icon deploy division in the window menu.




Click the add node icon.




In the node properties window, enter the name of the first node and make the desired stylistic adjustments if
there is place.




Finally, click the Save button to keep the changes. If you want to add a second node, locate the cursor Add a node
after or Add a node before, click, and repeat the registration process as described above the top.
Do this until the menu reflects the hierarchy of the DG of the menu.

Continue with the deployment of the hierarchical structure of the menu by clicking on the icon Add a subdivision.




Continue with the work by completing a division properties as described above by editing window if there is
property Division.




Tip : When you create a subdivision, may have to change its properties as properties by defects may not be
suitable as a visual cue meaning for this subdivision. Then make the necessary adjustments.
PREVIEW MENU

When you want to watch the final result as it appears on your page Scriptor after him have merged, click the
Preview button.




                                                    Menu user as it appears after its merger in page mode.




Click Preview to see the menu in navigation mode.

To preview the menu, click the Preview button in the window management.




You can also preview the menu by clicking the Preview menu icon in the window menu.
GENERATE A MENU

When your menu is complete, it is important that you can fix it in a final form that marries the HTML code. Both,
and as long as you deploy the menu and you edit it, code management remains property of Scriptor. To export it to
a page and make it accessible on the Web, you must first:

         1. Generate will make the menu (this operation it fit to be interpreted by different browsers).

         2 Merge menu in one page Web Scriptor.

The generation of the menu is a forced step just tweak the menu code and makes it available for viewing.
Whenever you edit a menu already merged with a Scriptor page, you will need to build it if you want changes to be
reflected in the pages that display it again.

To generate a menu, click the build button.




Scriptor will create the HTML code: the menu is ready to be merged in a Scriptor page.

Note : If you make changes in a menu, you click the build button again to do the updating.

MERGE A MENU INTO A SCRIPTOR PAGE

To insert a menu in a Scriptor page, first open the page, locate the insertion point   should be the location of the
menu, then click on the button Menu in the left menu.
Enter the number of the menu box numbers menu or click the find a menu button.




Then apply own Scriptor technical research to identify the menu you want to insert into the target page.




Click the menu you are looking for, or click on the find icon        to display all menus that you are either the
creator, or Manager initial letter. Then select the menu chosen by clicking the button




The number of the menu immediately registered in the appropriate box to Insert a Scriptor menu window. Click
Save to merge the menu.
CHANGE THE VISUAL ELEMENTS OF A MENU TITLE

To change visual elements or the properties of a title menu, remember on-screen window Properties Division or

node properties. To do this, click on the menu icon        , management of its nodes and its divisions.




Then, in the next window, click Change Division or node.




Finally, make the desired changes by writing new Visual properties of the menu in the input window
Note : Visually, Division and node properties are almost identical with this difference that title Division as well as
the background of the title area characters can be subject to a Visual animation in two States. Indeed, the title of a
menu node may allow a rollover effect: this characteristic has permit pursuant to change color (characters and/or
fill area) when the cursor rolls over.

CREATE A HYPERLINK TO A MENU TITLE

When you build a menu, follow two-steps:_1) first create the title of the entry by setting it in the right place in the
menu hierarchy, 2) assign an address to create a hyperlink to a target page. This operation is simply creating
original title by writing the address link box path; it may however be resumed, corrected or amended at any time
by changing the link properties that link title to its target.




To link a title to a URL, open the window Properties Division or node as appropriate, choose the target that you
want to achieve by choosing from the drop-down list and type the address in the box type; Finally, to save the
address by clicking the Save button.

Note : The word "target" designates the object referred by hyperlink title. When clicking on a menu title, Scriptor
instantly opens the target object to which it is linked. You can link a title to five (5) different types of objects: a
page of a website, a computer document already stored in a Scriptor directories, a Scriptor, page archive Scriptor,
group discussion, finally, one of the elements of the DG Scriptor.
VIEW CONTENT IN A FLYING WINDOW

When you create the hyperlink of a title, you can choose to display the contents of the target window in the same
window as the active page (this is the default Scriptor) or, still, display it in a flying window which you specify the
dimension. For display in a flying window, click new window box in the node properties window (or division), and
then type the dimensions you want for the new target window for viewing; the dimensions are listed in pixels.




With this operation, you can also choose to display the following properties in the new flying window:

         1 menu of your browser.

         2 address, bar

         3 bar status.

         4 standard buttons.

         5 option "resize the window.

Tip : Must use sparingly "flying window" option and do not unnecessarily burdening the top of this window is
showing all the options available, especially if the window size is small. The result would be likely to overshadow
the content you want to highlight Visual overload. Flying window is an excellent tool enhancement one-time
content: by opening a flying window, the user has obligation to close immediately after almost. That is why it
should be avoided to navigation links in the contents of the flying window. Otherwise it quickly observed a
congestion window on your screen surface.

CHOOSE AN INTERNET ADDRESS (URL)

To bind a menu title to an internet address (URL), open the Properties window title by clicking Edit properties of
the title (division or node).




Note : In the case of a division or a title node title, the procedure is the same, click Edit properties of the title to
display the Properties window, and then choose the type of link you want to show as the target of that link.
Choose URL from the pop-up menu, and then type the address in the path of the target page check box.




Click the Save button to confirm your choice.

POINT TO A DOCUMENT

A menu title can point to any likely to circulate on the Internet it document (.doc, .gif, .xls, .ppt, etc.). To bind a
menu title to a document, open the Properties window title by clicking the icon change properties of the title
(division or node).




Choose document in the menu path section. Then, click the Browse button.




Scriptor displays directories window.

Note : If the document you want to link to the title of the menu is already in a Scriptor directories, you must
identify the location, and then click to select. This maneuver is relatively simple, and it follows the same logic as
that of hyperlinks pointing to documents .
(1) CREATE A LINK TO A DOCUMENT ALREADY LISTED IN SCRIPTOR

To reach a document already registered in one of the Scriptor directories which you assume management by
hyperlink, click the drop-down list of the directories management - in the window directories management - in
order to view the contents of the desired directory.




Note : If the desired directory is not registered in the list of directories management, browse the hierarchy by
clicking the icon Directory parent, or icon directory top-level to deploy it until you repériez document desired.

Navigate to the document in the relevant directory and click the Select file




The location of the document is part of the file path box. Click the new window check box if you want the target
window is a flying window and specify the dimension. Finally, click Save to complete the operation.
(2) CREATE A LINK TO AN EXTERNAL DOCUMENT (HARD DISK, FLOPPY, ETC.)

If the document you want to make it accessible by hyperlink by clicking on a menu title is not present in a Scriptor
directories, you must first import it for viewing later. To import a document into a Scriptor directories, click in the
drop-down list of the directories management - in window Management directory - to display the desired
directory contents.

Note: If the desired directory is not registered in the list of directories management, browse the hierarchy by
clicking the icon Directory parent, or a top-level directory icon to deploy it until you repériez the desired
document.

When your drop directory is selected, click the Browse button in adding a file tracking the location of your file on
your hard disk.




Select the document using the procedure for your operating system selection: either by double-clicking, or by
selecting it and clicking the button file open.




Immediately after the operation completes, directories window appears again and the location of your document
is automatically entered in the title box. Do you have more to route it by clicking the Add button.




The submission of the file on the server may take some time because of its size. Scriptor makes downloading your
file in the chosen directory. Downloading a file, a window tells you the status of the progress of the transfer of
information. You want to interrupt the process by clicking the button pause the download. This window will
automatically clear at the end of the transfer.




The imported file now adds to the list of files in the current directory. Locate it, and click the Select file.




Immediately, the name of the file is part of the path of the node properties window or the Division file text box.
Click the new window check box if you want the target window is a flying window and specify the dimension.
Finally, click Save to complete the operation.
POINT TO A SCRIPTOR WEB PAGE

Title menu (division or node) can point to a page that you have written or are Scriptor Manager.

To associate a menu title with a Scriptor page, click the icon change properties of the node or Division.




In the Properties window of a division, choose Page Scriptor in the menu path Division. Click the Browse button.




In the Add a Scriptor page, use either the normal mode or tree view.

To switch between the normal mode in the tree view, simply click on the link at the top of the window




Tree mode, deploy the tree until you repériez page you wish to achieve as a target page. By clicking the chevrons
on the side of the page, the document number is automatically entered in the path box. But you can also directly
enter the document number. See the topic find document for details on the find function.
Finally, confirm your selection by clicking the Save button.

POINT TO AN ARCHIVE (OR CALENDAR)

Title menu can point to the file to archive a Scriptor publication. To link a menu to a title archive or calendar, open
the title properties window by clicking the Edit properties of the title (division or node).




Select archives the drop in the path section, click the Browse button
       Then locate the target publication you want to join by a hyperlink. See the topic find document for details on the
       find function. Select publication within results publication search window.




 Box publication




Calendar button




       Finally, confirm your selection by clicking the Save button.

       Note (When you put a link to the archive page of a publication, you can choose between two display modes: 1) a
       standard mode that displays the list of publications (to do this, check the publication); 2) a Calendar view which
       generates a calendar view to events published (to do this click the Calendar button).




                              View calendar                                             View archive
VIEW ARCHIVE

To view archive mode data publication, check Archive publications search window, and then click the Save button.




The Division properties window: number of the archive is included in the path box.




Complete the operation by clicking the Save button.
VIEW CALENDAR

To view a page in archive mode calendar, click the calendar button        when the publications search window
appears.




Insert a hyperlink window returns to the foreground, click the Save button before leaving the window.




Note : When you choose the calendar publication number registered in the area of window insert hyperlink text
mode is preceded by the letter "C".

POINT TO A DISCUSSION GROUP

A menu title can point to a Scriptor discussion groups. To bind bind a title menu to group discussion, open the
Properties window title by clicking Edit properties of the title (division or node).
In the Properties window of a division (or node) choose News from the pop-up menu section path, and then click

the Browse button




Then, in the adding a link to a group chat window, click the find icon      to search among all the focus groups,
or even click on the title of the newsgroup you want to appear as a target initial. Finally, click the Choose button
     before the title of the newsgroup you want to register as a target title.




POINT TO ONE OF THE ELEMENTS OF ELECTRONIC MANAGEMENT OF DOCUMENTS

A menu title can point to one object (folder, or file) of electronic management of documents. To link a menu title
to any of the objects of the electronic document management, open Title properties window by clicking the Edit
properties of the title (division or node).
In the Properties window of a division (or node) choose electronic documents from the pop-up menu path,
section, and then click the Browse button.




Scriptor opens the window of the electronic document management. Deploy the DGs, and locate the object you
want to appear as the title target by clicking on the icon of the file selection.




The link will be automatically as a target on the title of the menu that you just created. By clicking on the menu,
Scriptor will open the electronic management of documents by selecting the target folder.

POINT TO A SCRIPTOR HYPERLINK

A menu title can point to a Scriptor hyperlink. To bind a menu title to hyperlink Scriptor, open the Properties
window title by clicking Edit properties of the title (division or node).
In the Properties window of a division (or node) choose Hyperlien Scriptor menu dropdown section path, and then
click the Browse button.




Then, in the Search hyperlink window, click the find icon        to search among all hyperlinks, or even click initial
title hyperlink that you want to appear as a target. Finally, click the Choose button       before the title hyperlink
you want to register as a target for the title.




The link will be automatically as a target on the title of the menu that you just created. Clicking the menu Scriptor
will open the hyperlink.

POINT TO A PERSONAL ACCOUNT

A menu title can point to one object (folder, or file) to a personal account. To link a menu title with one objects to
a personal account, open Title properties window by clicking the Edit properties of the title (division or node).
In the Properties window of a division (or node) choose personal account from the pop-up menu path, section,
and then click the Browse button.




Scriptor window tree pages. Deploy the DGs, and locate the object you want to appear as the title target by
clicking on the icon of the file selection.




The link will be automatically as a target on the title of the menu that you just created. By clicking on the menu,
Scriptor will open the folder or the targeted file.


ADD A MENU MANAGER

Any user that has privileges to manage profiles and subfolders can invite another user to participate in creating
and Managing menus. Scriptor allows a decentralised management menus: it is sufficient that a user is invested
with adequate privileges to redistribute them to other users using the formula "I bequeath to my descendants
privileges I already own. However in order to manage a menu, a user must have the privilege of document
management. Otherwise, the Menu icon          will not be accessible from the toolbar.

Tip : When a menu must be kept up-to-date by an exclusive user group, create one Group secure to whom you
grant privileges Management menu. This operation is done by clicking on the Users menu management icon from
the menu window.

Only a Manager user documents that have a status of sous-administrateur may assign menu management
privileges to other users (individual or Group secure).
To assign privileges menu management of users, click the Users menu management icon                       in the window
menu.




ADD AN INDIVIDUAL MENU MANAGER


Then click the button                (to choose a particular user)




Then browse the list of individuals or groups secure by doing the proper research. Select a profile from the drop-
down list and click the name of the individual initial or yet to launch a global search by clicking the      icon in the
Add a user management menu.




Check the name of the new Manager, and then confirm your choice by clicking the Save button.
Note : To select individuals a profile, select alias; otherwise, to discontinue the profile list select, select individuals
approached as managers only name; then click Save.

ADD A SECURE GROUP INDIVIDUALS

To add individual group secure as managers of a menu, click the                   button in the list of users and groups
secure management on the menu window.




Click the      icon to find all profiles secure in the add trusted management menu groups. You can also click the
initial desired secure group name. When you see the results window selected individuals who will become the new
Manager menu.




To select all profiles, select Select or de-select all profiles. If want you to assign the management to a particular
group, simply tick the checkbox to the side of their profile.




Finally, complete the operation by clicking the Save button.
REMOVE A MENU MANAGER

To remove a Manager menu, click on the Users menu management             in order to access the list of users and
secure groups window icon.




Then select delete user or secure group you want to remove the menu Manager.




Finally, click the delete users and secure groups selected by management on the menu icon.

REMOVE A MENU MANAGER PRIVILEGE MANAGEMENT

If you simply remove the privilege management without removing the list manager, select the alias check box, and
then click the button Add/Remove management administrator menu.
CLEAR MENU TITLES

To erase a title menu, remember Properties Division or node properties window on the screen. To do this, click on

the icon menu      , management of its nodes and its divisions.




Then you click the Remove (this node or division) icon     .




Affirmative reply confirming your choice in the dialog window that appears on the screen.




FIND A MENU


If you want to find a menu, click the menu icon in the toolbar.
Then click the find icon      in the window menu.




Results window will appear. You can do all the desired editing operations.




Note : Click for more refinement in the research, see Search in Scriptor .


SEARCH IN SCRIPTOR

Scriptor is storing the information in its own MySQL database content management tool. When you want to look at
one of the objects managed by the software (page Scriptor, documents stored in physical directories of
documents, menus, a username, database etc), Scriptor offers a search method that lets you quickly locate the
desired object. Window search launches search engine when you click the           icon. You can thus find either in the
alphabetical list of all pages, in numbers of pages, or search for a word or characters whose instance appears in the
name or description of the document.

Note : Search technique that we describe here is appropriate for each search you perform in Scriptor. Once you
find an image, a text, a user, a discussion group or menu, the search procedure is the same in any Scriptor: search
Windows are almost identical and behave similarly. This procedure also applies when you are prompted to
navigate in the DG. This navigation technique will also be used to locate an object (document, image, movie
animated, etc.) that you want to identify as the target of a hyperlink.
FIND A SCRIPTOR PAGE

In normal mode display, to find a Scriptor page, click the radio button that identifies the desired search criteria:

         • All Scriptor pages (search by alphabetical order Scriptor pages that the user has rights management);

         • document number (Search in the Scriptor page numbers);

         • Document name (search for characters in the name of the Scriptor pages (type * has *);)

         • Document description (the characters in the description of the Scriptor pages search (type * has *))




Specify the name or number of the requested page in the text box and click on the icon.




Radio buttons




If you click one of the letters of the alphabetical list, the result search show only pages whose initial of the name or
title begins with the chosen letter.




If you click the    icon with nothing included in the search box, all present Scriptor pages which you carry your
privileges management will be displayed alphabetically, according to the chosen category. You can also determine
the number of pages displayed in the output window by modifying the figure of the drop-down list.
When the window of results appears, click on the icon of your choice to continue the appropriate room for
manoeuvre. (To change the number of documents displayed by default in the result window, change the Scriptor
Preferences).

Note : The result of a search query includes only the pages that you have written. However, you can see other
documents where these document management you will be given due to the assignment of a privilege of shared
management .




                                      Displaying the search results window




DESCRIPTION OF THE SEARCH PAGES PAGE ICONS

The following table presents the function of different icons for document search results window.



Icon              Name                                    Action raised
          SELECT PAGE OR OBJECT               Selects the page or the object to delete.

        OPEN THE PAGE OR OBJECT                    Opens the page in edit mode.

                 STATISTICS                          Displays the statistics page.


            MODIFY PROPERTIES                  The page properties window appears.


               DELETE PAGE                          Removes the selected page.


             PAGE MANAGERS             The list of users or groups secure page window appears.


        MANAGING SECURITY PAGE                Displays the page list groups secure read.
TREE MODE

Mode tree provides a classification by hierarchical folders where you can organize your Scriptor pages. Tree mode
is, and by far the most convenient to manage all the pages of a website. By default, all the Scriptor pages are listed
in the alphabetical database and are accessible by the looks normal .

Furthermore, the tree mode allows you to group pages so that you can bring together them in a coherent while
controlling automatic numbering pages gathered in the group; you can therefore include those pages in a visual
environment chosen by specifying a number of Visual characteristics including the header, the page framework
and the framework printing. Group pages can then be used to write procedures guides, manuals, conventions, etc.,
put online instantly and, especially, to a dynamic update.

Finally the tree mode is directly linked to your site map generation tool. Whenever you change the order of the
Scriptor pages in a folder, it will be automatically updated for the next generation of your site map.

Tree mode presents another form of Scriptor pages display. In reality, the DG pages lets you build a personal
classification and gather pages that belong to natural as groupings: the elements of the home page, masters and
merge pages, thematic groupings by subject, by area of interest, by individuals, etc.

(This tree is not built automatically by the software, it is you who are building: a) by creating folders and
subfolders, b) by choosing documents and where they should be part of the DG. The DG of documents is therefore
a personal organizing your Scriptor, pages specific to each user, and is transferable in any way, the Manager may
have access to more personal trees by choosing among the trees of the system store. The DG pages is a logical
structure that you deploy to the progresses of your production, working at the pace of construction of each of your
pages Scriptor.

When you run the search pages Scriptor, you can, at any time:

         1) enter mode tree;

         2) switch to mode of management of the DG;

         3) return mode normal.




SWITCH TO THE TREE VIEW

To upgrade the tree display mode, click hyperlink go to the tree view in the search pages Scriptor window title
bar.




Note : Administrators can choose how to display by default in research, normal mode or tree, window by selecting
in the Preferences .
DEPLOY THE DG

The tree view has two modes of display: reading view and Management mode. Reading view does that present
the DGs and its content; the Management mode to change the DG: Add folders, pages, or yet, move in cutting-
tights. For a reminder of the meaning of the icons in the tree Mode, see the table icons.

To deploy the DG, click change to the tree view and then click Management in the Search window.




Pages tree window appears, you are ready to build your DG.
CREATE A FOLDER/CREATE SUBFOLDER

To create a folder or a subfolder, deploy the Management tree pages, window then click icon or click the link Add
folder.




In the folder properties window, type the new folder name in the appropriate text box. Choose the sort order and
enable autodial folders; specify sales start numbering as well as the separator character.




Select Group pages if you want to create a dynamic collection of pages and provide the sequence of their display in
the merge. Choose to show or hide title headers and Scriptor pages. Choose the style and import a template from
header, page framework and should you wish to print framework. Specifies whether to activate the form. Continue
with the configuration of the site map. Finally, click the Save button.
Note: The Group pages option of launching a sophisticated system of automatic generation of documents, by
merging successive pages, present the pages of the DGs folder in a coherent and linear set.

Continue with your work of deployment of the DG under the main logical or thematic groupings that you want to
appear. If necessary, create subfolders by inserting files in top-level folders.




To see the work done, click read hyperlink in the page tree window title bar.




To find the management environment, click hyperlink Management title bar order to display the icons of
management.




Pages read-tree




                                      Preview pages mode management tree



Note : When you want to add a same-level element, click the icon to Add the top-level. If you want to add "in" a
subfolder, click Add subfolder. When you add an item, Scriptor loads itself to do the sort order chosen,
alphabetical or numeric.
ADD A PAGE IN THE DG

To insert a page on the DG, click the new page icon




Then complete page information.




ADD PAGES IN THE DG

To insert multiple pages in the DG, click on the icon Add pages




Then locate the document you want to insert in the subfolder in the database. Use the customary search
technique in Scriptor.
Search General by clicking on the      icon, or alphabetical search by clicking on the letter that corresponds to the
initial name searched documents.




Then choose the desired documents by clicking on the select.




Don't forget to click the Save button when leaving confirming additions.
DUPLICATE A DIRECTORY AND ITS CONTENTS

To copy an entire directory as well as its content, simply click on the duplicate a directory and its contents.




The Replication folder, subfolders and Scriptor pages window opens allowing you to perform the required
configurations.




Don't forget to click the confirm button when leaving confirming additions.

RENAME A FOLDER

To rename the DGs folder, click the Edit the folder icon.
In the change folder window, change the name of the folder and assign it the required values and then click Save
to keep the changes.




RESTRICT SCANNING

To restrict the scan in the DG has a specific level, check the restrict scanning and specify the number of level. The
DG deploys not beyond of the indicated level.
MOVE A FOLDER OR CUT/PASTE A FOLDER

If you want to move a folder to promote (him do I win a rank in the hierarchy of the DGs) or to demote it (the
integrate into a lower hierarchical level folder), choose the folder by clicking in the checkbox Select, click the
Cut/paste icon (you can also do a multiple selection by selecting multiple folders a level).




And, in the tree page window, select the level of the DG to which you want to migrate the selected folder, locate
and click the insertion point.




The operation is done instantly and folder moves to the location chosen.
MOVE A DOCUMENT

If you want to move a Scriptor page, choose the page by clicking on the select, click the Cut/paste icon (you can
make a multiple selection by checking multiple pages a level).




Then, in the management of the DG pages window, select the level of the DG to which you want to migrate the
selected document, locate and click the insertion point.




The operation is done instantly and folder moves to the location chosen.
DELETE A FOLDER

If you want to delete a folder, choose junk folder by clicking the select, and then click the Delete folder icon.




To delete a folder, select it, and then click the small trash.

The folder is immediately removed from the DG.

REMOVE A PAGE FROM THE DG

If you want to remove a page from the DG without destroying it (without remove it permanently Scriptor pages
database), select this page by clicking the select.




And then click      Remove selected tree pages. You can also remove multiple pages at once by a continuous or
discontinuous selection into a folder.
A message asks if you want to continue the operation, click OK to confirm, Cancel to abort.




The document will be removed from the DG without destroying: you can always find it by
searching in normal mode.

DELETE/ERASE ONE DOCUMENT PERMANENTLY

If you want to delete a page and remove it permanently Scriptor pages database, select this page by clicking on

selection, more click permanently delete the selected pages.




A message asks if you want to continue the operation, click OK to confirm, Cancel to abort.
CHANGE THE CURRENT DIRECTORY

If you find a document .jpg, .doc, .pdf, .xls (or any other extension) and that you get no results, check first what
directory you start searching. May the document you were looking for is located in a different directory current
directory. To change the current directory, click the documents tab         click directories     in the menu bar.
Using the drop directories management, select the directory of your choice.




You can also move up in the hierarchy of directories by clicking on the hyperlink Directory parent.




RENAME, VIEW, OR DELETE A DOCUMENT FOLDER

Scriptor directories are stored on the server where the Scriptor software resides; you go to these physical from the
tab directories documents       , then click directories menu bar   . These directories are structured according to
a traditional tree structure and may deploy to infinity. If you have a privilege Management directory, you can
create directories and deposit (or remove) all types of documents from the outline level you are the Manager. You
can also jointly manage a directory with other road users when the sous-administrateur of which you depend in
granted you privilege. Thus, when you enter Scriptor as Directory Manager, menu bar will be automatically
configured to provide access.




Note : Menu bar indicates that the user has all rights management since all its menu bar icons are active.




Note : This bar menu, on the other hand, reveals that the user has not all rights management since its menu bar
icons are not all herein.
RENAME A DOCUMENT, A FILE

To rename a file, click the documents tab                 click directories   from the bar menu.




Locate the document that you want to change the name, change the appropriate directory (see the topic Insert an
image from a directory for you become familiar with navigation technique) and click the rename file.




Then do the changes you want in the editing window.




Finally, click the OK button to confirm the change.

DELETE A DOCUMENT, A FOLDER

To erase a file, click the delete file (the trash can icon) window icon.
Then confirm your intention by clicking OK in the confirmation window.




Finally, you can make multiple deletion of files by clicking in the check selection window of the current directory,

and then click the Delete selected pages icon          .




LOCK A DOCUMENT


To lock a document by clicking the lock a file icon.
RESIZE A FILE


To resize an image, click resize the file icon        .




Give it the dimensions you want by taking good care check box constrain proportions so that the image is not
distorted, and then, from the drop-down list, choose how to save for you. Click the Save button to confirm.




VIEW A DOCUMENT

To view the document, click the file icon        , you can also obtain the same result by clicking on the   button save
the file.
COPY AND PASTE THE URL OF THE FILE

To copy and paste the URL representing the file, simply click on the corresponding button, access complete
appears highlighted to you quickly, copy it to then paste address where you want.




MERGE PAGES

Merging documents is an operation which brings together in a single page data produced in other Scriptor pages to
create a single document. It merges a Scriptor page with another page Scriptor to generate a target page that
gathers information sources page.

"Fusion page" is one of the most important functions used during the construction of Web pages because it allows
you to display on a main page (often a page frame) the content of different subpages. For example it may
incorporate a cell in the homepage items in other pages as images, titles, texts, in the form of a list of hyperlinks,
navigation menus etc. Merge 'calls' designated pages to merge into the space of the main page as if she becomes
the meeting place of multiple simultaneous views. However, when it modifies a element merged "pieces", this
means that all pages that incorporate it will instantly retouched. This technique will be used for the fast growing
sites where it should add (or subtract) update of new navigation elements. Is not necessary to add in each page,
simply add hyperlinks - or headers - source page for example to make the entire site to be updated.
To merge the content of a secondary page in a segment on the main page, choose first insertion point   and click on the tab
page      from the left-hand menu.




                                                                    Insertion point




                                                                                                                 Search the
                                                                                                               secondary page




Locate the secondary page according to the technical research specific to Scriptor, then save your choice.

Tip 1 : When it wants to build a site-wide, it is necessary to design the architecture pages based on the merger may
be carried out. A Portal homepage will also in construct mode page framework to distinguish the containing the
content. It could come from 4 or 5 different mergers: logo at the top-left menu navigation bringing together
different icons tools (research, plan site, etc.), navigation menu horizontal secondary referring to commercial
sections of the site (Tools, calendars, etc.), bringing together all hyperlinks in content, a navigation banner at the
bottom of the page, left navigation menu for quick return to the homepage, etc. It should be noted that blending
technique is intimately linked to the technique of building a page to another page which allows structurally
identical pages. Change then one merged secondary pages to get full and instant site updated regardless of the
number pages it contains.

Tip 2 : All of these pages will form a content structure that the DG of webpages can perfectly reflect. By observing
the hierarchy of the pages on the site, we can observe a classification that will come to illustrate a systematic
construction concern which reveals the basic content architecture.
MERGE PUBLICATION LIST

Displaying the list of items published in a master page, simply designate the location where you want to see it
appear by clicking on it , click on the publication of the left menu tab.




                                                           Insertion point



                                                                                                     Search the secondary
                                                                                                     page




                                                                                          Number of items displayed
In the merge publication properties window, choose the number of items in the list you want to appear in the
Scriptor page first. Based on your communication strategy, choose a number to view the title and summary for as
many as you want news publications.




Then click on the Search button           to find the desired publication. Search for publication according to the
technical research specific to Scriptor, then save your choice.

MERGE A PLUG-IN CODE

If you want to embed code programming non-Scriptor (Flash, HTML, JavaScript) and do run in the page or a specific
cell, choose the insertion point then click on the application of the left menu tab.




                                                                     Insertion point
In the merge plug-in properties window, type or copy - paste the code you want to see run page programming. If
you want to insert HTML from a document stored in a Scriptor directories compatible programming code, click on
the Search button and manœuvrez as if it were an item that you need to locate in Scriptor; directories select or
import this programming element, and then click Save to confirm your choice.




Upon confirmation of your selection, a new insertion point       is added in the Scriptor page: it point; this point
indicates not only that a plug-in newly added page Scriptor, but also are place of execution. If you want to change
the contents of the inserted code programming, click on the insertion point     then perform them in code editing,
and exit by clicking the Save button.

Note : Plug-in enables the introduction of different programming languages such as: ASP, PHP, JavaScript, but may
also include applets JAVA.

COPY-PASTE AN ITEM

Scriptor web pages management program provides editing objects contained therein. Indeed, you can use the
function copy - paste for each element of the page. This Publisher does not double features text editor with which
you can cut-copy-paste the string in a box; rather it is a second level editor that has for object processing
components of a Scriptor web page. Therefore, you can copy an object (a picture, table, or a box for example) to
paste it elsewhere on the same page, or even, in another page, this function provides a very useful tool that allows
the reproduction or fast moving objects on a page to another.

Here are the objects that you can copy - paste with the Scriptor document Editor:

                  • a table.                                                • an image.

                  • a box;                                                 • a hyperlink.

               • a list bullet.                                           • a publication;

                 • a plug-in.                                          • merged document.
To copy - paste an item a Scriptor, page click on the Copy/paste        from the left menu tab.




In the editing window, check the items you wish to copy/paste to a discontinuous selection or click on the button
check everything to copy/paste all the objects on the page.




Click the button clear all to resume your selection or Cancel to cancel the operation.

When you are finished selecting items, click again on the copy/paste button at the top of the window or in the left
menu to specify your intention to copy or cut.
Return target (the one in which you want to see will paste the selected item) in the page and choose your insertion
point , and then, in the left menu click again the Copy/paste to return to the foreground window cut and paste.




Then select the object you wish to paste and click the Paste button. Paste and remove button removes the
selected list item; the button return to selection mode, firm window and allows you to repeat another selection.

Note : If a selection multiple, cut and paste window brings up the list of all selected objects; it remembers them
also so much and as long as you don't remove the list by clicking the selected items. To return to the selection
window, click return to selection mode.




CREATE A BULLETED LIST

Scriptor provides a tool for managing lists. You can create two types of lists: an ordered list whose elements are
preceded by alphabetic or numeric tag choice (letters uppercase, lowercase, uppercase or lowercase Roman
numerals), or an unordered list preceded by "chip" graphic symbol (empty circle, full circle, square full).
To construct a bulleted list, choose an insertion point    in the Scriptor page.




Then click the list tab   in the left menu.

INSERT AN UNORDERED LIST

An unordered list gathers objects (text, hyperlinks, etc.) in bulk in single sequence of their vertical alignment. This
type of list is usually preceded by a microchip that identifies it. If you want to insert an unordered list, select the
No orderly button and click the drop-down list to choose the type of chip you want to install the initial topics of
your list.
Choose the color markers list by following the usual procedure for selection of colors (see below); also choose size
and font of the chip and the bullet style, whether it is appropriate.




Finally, confirm your selection by clicking the Save button.

INSERT AN ORDERED LIST

An ordered list is a collection of objects (texts, hyperlinks, etc.) capped an alphabetical or numeric marker to initial.
If you want to insert an ordered list, check the orderly and click the drop-down list to choose the desired marker
type. (Letters or numbers, uppercase or lowercase). Also choose bullets, color and style of the font, size and style
of the list.
CHOOSE THE COLOR MARKERS

To choose the color of markers or bullets, click the Search button        . In the color selection window, click the
color you want on the palette samples, also, tapes R (red), G (green), B (blue) values in the appropriate boxes. You
can also specify the HTML color code in the HTML value box.




Never forget to clear the transparency check box, otherwise the color will not be applied to
your chip.




Finally, click the Save button to confirm your choice.

INSERT BULLETS AND/OR MARKERS

When you finish specifying the properties list, now you can build your list and introduce bullets and markers on the
one hand, and list items see another share in the entry page appears new icons: Add , Insert a chip before
and Insert a bullet after.
INSERT A FRONT CHIP

To insert a chip before, click the Insert before bullet icon.




Then confirm your choice in the window Insert a bullet.




Repeat as many times as necessary, Scriptor will introduce bullets by alphabetical and/or numeric list order
management. Once finished, you can now insert content from the list by clicking on the points of insertion :
Insert content by clicking on the button menu on the left that corresponds to the object you want to insert in this
precise level list: text, image, hyperlink, etc.




INSERT A BULLET AFTER

To insert a bullet after, click Insert a bullet after.
Then confirm your choice in the window Insert a bullet.




Repeat as many times as necessary, Scriptor will introduce bullets by alphabetical and/or numeric list order
management. Once finished, you can now insert content from the list by clicking on the points of insertion :
Insert content by clicking on the button menu on the left that corresponds to the object you want to insert in this
precise level list: text, image, hyperlink, etc.




EDIT A BULLETED LIST

In process, you can change the nature of the list by changing its properties. You can also change each item and edit
the contents of the list as you wish.

To edit the items in a list, click the change list bullets.




In bullet properties window, do it now fixes.
Saving the changes, the list will update automatically.




CLEAR BULLET AND ITS CONTENTS

To clear a chip and its content in a list, click on the insertion point next chip to clear and then the delete tab from

the left menu.




Then check the boxes to remove bullets and confirm by pressing the                               button




LOCK FIELDS AND OBJECTS ON A PAGE

You can lock a page fields to prevent that other users change the content. This practice is necessary when we give
in sharing a page template with some specific fields must be updated by users; in this operation to update, it
would certainly not want user to be able to change the same breathtaking logo enterprise, corporate pages,
background color and even graphic model of the institution. Well, it will want to see user to use a template page to
include the relevant information concerning them (name, first name, address, telephone number, photo, etc. and
seized even the bodywork of the template page), but it would certainly not see it change the Visual design of the
model. In these conditions, should lock certain fields and objects in a page of escape from any changes of users.
To lock the fields and objects on a page, click the markers from the left menu tab.




A new view of the page then appears on the screen. All points of inserts have been redoubled somehow by small
selection boxes accompanying them. These boxes are the markers of locking. Select the fields that you do not
want to see change by the user, and then click the Save button.
Inserts points locked page does appear more screen the next display working mode (where inserts points appear
display mode). Only appear points inserts that you have not locked, ready to be edited.




In the above window, only the wysiwyg text fields and those intended for the addition of cells in the table are
editable.


VIEW A PAGE


To view a page, click the Preview    of the left menu tab. The page will appear as seen by users
without tags, without insertion points.

				
DOCUMENT INFO
Shared By:
Categories:
Tags:
Stats:
views:9
posted:11/23/2011
language:
pages:152