Document Sample
3191100pdf Powered By Docstoc
					A&L LABORATORIES, INC. • 1001 Glenwood Avenue • Minneapolis, MN 55405 • (612) 374-9141 (800) 225-3832 MATERIAL SAFETY DATA SHEET
1. CHEMICAL PRODUCT IDENTIFICATION Trade Name: PERA SAN Chemical Name & Synonyms: SANITIZING SOLUTION (EPA REG NO. 68660-4-3276) 2. COMPOSITION/INFORMATION ON INGREDIENTS Hazardous Ingredients/Identity: Hazardous Components: Peroxyacetic Acid Hydrogen Peroxide Acetic Acid Content 5% 20-24% 10-12% CAS No. 79-21-0 7722-84-1 64-19-7 ACGIH TLV NA 1.4 mg/m3 25 mg/m3 OSHA PEL NA 1.4 mg/m3 25 mg/m3

3. HAZARD IDENTIFICATION Primary Routes of Entry: Skin contact, eye contact Routes of Entry/Affects of Exposure Inhalation: Mists can cause irritation or burns of the upper respiratory tract. Pneumonitis can result from severe exposures. Skin: Major potential hazard. Contact with the skin can cause severe irritation and burns. Eyes: Major potential hazard. Mists can cause irritation, with high concentrations causing destructive burns and possible blindness. Ingestion: Ingestion can cause severe burns and pain in lips, mouth, tongue, throat and stomach. Death can result from ingestion. Chronic Effects of Exposure: May cause areas of tissue damage or dermatitis. Carcinogenicity: The components in this product are not listed in the IARC, NTP, OSHA, or PA lists of carcinogens. CA Proposition 65: N/A Medical conditions aggravated by exposure: May aggravate existing skin, eye, or respiratory conditions. First Aid Measures Oral Ingestion: DO NOT INDUCE VOMITING! If person is conscious, immediately administer water. Do not give anything by mouth to an unconscious person. Call a physician. Take to hospital. Special Note: Skin Contact: Immediately flush contaminated skin with plenty of water for at least 15 minutes. Remove contaminated clothing and shoes while flushing with water. If burn or irritation occurs, call a physician. Eye Contact: Immediately flush eyes with plenty of clean, running water for at least 15 minutes, holding eyelids apart to ensure flushing of the entire eye surface. Call a physician. Inhalation: Immediately remove victim to fresh air. If respiratory symptoms or other symptoms of exposure develop, seek immediate medical assistance. NOTE: Above data estimated from safety data for components. 4. FIRE AND EXPLOSION HAZARD DATA National Fire Prevention Association Hazard Ratings Health Hazard: 3 Flammability Hazard: 1 Reactivity Hazard: 1 Maximum Personal Protection: OX Flash Point (ºC): N/A - water base. Generates oxygen gas when heated to 120 F or above. Test Method: N/A Recommended Extinguishing Media: Water, CO2, Foam, Dry Chemical, Earth or Sand Unusual Fire and Explosion Hazards (Conditions to Avoid): None known to A&L Laboratories, Inc. Special Fire Fighting Procedures: None known to A&L Laboratories, Inc.



5. HANDLING AND STORAGE Handling Precautions: DANGER! Causes severe eye and skin irritations or burns! Protect eyes, skin and clothing from contact with product. Wear recommended protective equipment. Use only with adequate ventilation. Keep container tightly closed when not in use. Wash thoroughly after handling product. Other Precautions: Keep container tightly closed when not in use. Do not return product to original container. 6. SPECIAL PROTECTION INFORMATION Ventilation Requirements: Local exhaust Recommended personal protective equipment (normal use conditions): EYE PROTECTION - Safety glasses with side shields; SKIN PROTECTION - Plastic or rubber gloves, rubber boots, and rubber apron; RESPIRATORY PROTECTION - Supplied air respirator if airborne limits are exceeded. 7. PHYSICAL DATA Appearance: Odor: Available Chlorine: Water Miscibility: Water Solubility: Bulk Density: Boiling Point: Specific Gravity: ph:

Clear, colorless liquid Vinegar odor N/A Complete Complete N/A NA – Decomposes at 120 F 1.1 1.3 (1oz./gal/ in water)

8. REACTIVITY DATA Stability under normal conditions: Stable Incompatibility (Materials to Avoid): Base; Oxidizers; Other - chlorine releasers, many metals, charcoal, and many combustible materials Hazardous Decomposition Products - Thermal & Other (List): Thermal - Oxygen, steam, noxious gasses. Hazardous Polymerzation: Will not occur. 9. ENVIRONMENTAL INFORMATION STEPS TO BE TAKEN IF MATERIAL IS SPILLED: For small spills, add dry material to contain. For large spills, dike to contain. Wearing recommended protective equipment, remove bulk of liquid. Flush spill area with water to eliminate residues. Do not add other chemicals. Waste disposal method: This product (if disposed of as shipped) meets EPA criteria of a hazardous waste (as specified in 40 CFR 261) based on its corrosiveness. Dispose of in a licensed hazardous waste disposal facility in compliance with all applicable laws. 10. TRANSPORTATION INFORMATION UN classification must be verified with current packaging UN Information Oxidizer, Hydrogen peroxide and peroxyacetic acid mixture, stabilized. 5.1, UN 3149 PGII 1-800-424-9300

Shipping Name: DOT Hazard Classification: Emergency Telephone No:

As the conditions or methods of use are beyond our control, we do not assume any responsibility and expressly disclaim any liability for any use of the material. Information contained herein is believed to be true and accurate but all statements and suggestions are made without any warranty, express or implied, regarding accuracy of the information, the hazards connected with the use of the material or the results obtained from the use thereof. Prepared by: Dan Jacobson, Technical Director Date Prepared: September 25, 2006



Shared By: