Material Safety Data Sheet
1. Chemical Product & Company Identification
1) Product Name : Polyethylene Terephthalate Film / SD 100
2) General Property : Non-Colored Transparent Film
3) Hazardous Class : Not Applicable
4) Application :
5) Supplier Identification
Factory
Address : Shinhangri 98-7, Doon Po Myun, Asansi, Chungnamdo, Korea
Tel : +82-41-531-5005
Fax : +82-41-531-0035, 5182, 5187
Office
Address : Knag Nam Bldg, 5th Floor 1321, Seocho-Dong, Seocho-Ku,
Seoul, Korea
Tel : +82-2-3471-3410∼ 3413
Fax : +82-2-2471-3414∼ 3415, 3442
2. Composition/Information On Ingredient
Chemical Name CAS No. RTECS No. UN No. Content(%)
Polyethylene terephthalate 25038-59-9 - - 99% over Min.
Silica 112926-00-8 - - 1% under Max.
※ This product dose not contain ingredients which are hazardous according to FDA
Regulation 21 C.F.R 177.1630 and 49 C.F.R 172.101.
3. Hazards Identification
1) Adverse Human Health Effect
In case of melting the pellet at high temperature, the decomposed gas may
irritate your eyes.
2) Environmental Effect
Not expected to be hazardous to the environment in present form.
4. First Aid Measure
1) Eye Contact
Not likely to be an eye hazard in present form.
If you are wearing contact lenses, you have to remove them and continue rinsing
Do not let you rub your eyes.
If you feel something abnormal or strange, you should take the medical advice
from a doctor.
2) Skin Contact
When you touched the melted product, you cool down by clean water.
You should not strongly remove the cooled product from your skin and take
the medical advice from a doctor.
3) Inhalation
When you felt unwell by breathing in the gas generated from melting product,
you should move to a fresh air place and wait your recovery.
If you could not improve, you should take the medical advice from a doctor.
4) Ingestion
If you feel unwell, you should take the medical advice from a doctor.
5) Other Information
If you feel something abnormal or strange, you should take the medical advice
from a doctor. None is specific antidote.
5. Fire-Fighting Measures
1) Specific Hazards with regard to fire-fighting measure
Apply water from a safe distance to cool and protect surrounding area.
Remove the product from fire areas if it can be done without risk.
Fire-fighters should wear proper protective equipment.
Evacuate personnel to safe areas.
Fires involving this material produce large amount of sooty smoke.
Dense smoke emitted when burned without sufficient oxygen.
During a fire, irritating and highly toxic gases may be generated by thermal
decomposition or combustion.
2) Extinguish Media
In case of fire, use water spray, foam, dry chemical powder or carbon dioxide.
6. Accidental Release Measure
1) Measure for Handling Personnel
Wear proper protective equipment
2) Measure for Environmental Effect
Do not away into sewer or waterway
3) Other Measure
Stop source of spill. Sweep up for immediate collection and disposal.
If material enters a sewer or waterway, notify responsible authorities of presence
of non-toxic plastic product.
7. Handling and Storage
It is recommend that you comply all compliance to applicable laws and regulations
governing proper method and regulation in case of storage
1) Exposure control for handling personnel : Not Available
Protective measure against fire & explosion : Not Available
Others : you should not breathe in the gas generated in melting product and not
touch directly the melt product.
2) Storage
You should store the product indoors far away from heat or the source of fire.
8. Exposure Control/Personal Protection
1) Engineering Measure
If process generate dust, fume or mist use ventilation to keep to airborne
contaminants below the exposure limit.
2) Respiratory protection
For most condition, no respiratory protection should be need; however in dusty
atmospheres use an approved dust respirator
3) Eye protection : Not Available
4) Hand, Skin and Body protection
Selection of specific items such as gloves, boots, apron or full-body suit will
depend on operation
5) The exposure standard of workshop
It is not established by OSHA, ACGIH
9. Physical & Chemical Properties
Appearance Non-Color Transparent Film Volatility None
Odor None Vapor Density Not Available
pH Not Available Density 1.35∼ 1.40
in water Insoluble
Solubility(%) Vapor Pressure Not Available
in others Not Available
Boiling Point Not Available Others
/Boiling Point Range
Melting Point 255∼ 265℃
/Melting Point Range
10. Stability & Reactivity
This product is considered a stable material under normal and anticipated storage
and handling.
Flash Point 346∼ 399℃
Upper Not Available
Explosion limit(%)
Lower Not Available
Flammability Probable
Oxidization Improbable
Auto-ignition temperature 483∼ 488℃
Combustibility The ignition temperature is 483℃
Spontaneous-Reactivity with water Not Available
Dust explosion The lower limit concentration for explosion is 40g/㎥, if the
product is powdered
Self-Reactivity None at room temperature.
In melting product at high temperature, the decomposed gas is
generated
11. Toxicological Information
1) Acute Toxicity
It has not been reported about its harmfulness
2) Sub-chronic Toxicity
It has not been reported about its harmfulness
3) Chronic Toxicity
It has not been reported about its harmfulness
4) Carcinogenic Effects
It has not been reported about its harmfulness
5) Mutagenic Effects
It has not been reported about its harmfulness
6) Irritant Properties
The generated gas during drying or melting the product irritates your eyes.
7) Allergenic and sensitizing Effects
It has not been reported about its harmfulness
8) Teratological Effects
It has not been reported about its harmfulness
12. Ecological Information
1) Environmental Data
Not expected to be hazardous to the environment in present form.
2) Bio-degradability : Not Available
3) Bio-accumulation : Not Available
4) Other Information
May be harmful to wildlife if ingested
13. Disposal Consideration
1) Product Disposal
Sweep up spilled product and place in suitable container for recycle or disposal.
Dispose of recovered material according to current regulation
2) General Comment
It is recommend that all waste be analyze for compliance to applicable laws and
regulations governing proper waste disposal method and reporting regulation
14. Transport Information
1) Class & Regulation by Rule of Transportation & Storage of Dangerous Article :
Not Applicable
2) Transport Consideration : Not Applicable
3) Class & Regulation by other Transport Regulation
D.O.T : Not Applicable
I.M.O : Not Applicable
ARD/RID Hazard Classification : Not Applicable
ARD/RID Item Number : Not Applicable
4) Transport Consideration : Not Available
15. Regulatory Information
1) OSHA Classification : Non-Hazardous
2) SARA Regulation Section 313 and 40 CFR part 372
this product does not contain any chemicals subject to the reporting
requirement of SARA.
3) TSCA Inventory Status
In compliance with TSCA Inventory requirements for commercial product.
16. Other Information
Information contained in this MSDS is the best information currently available to us.
However, no warranty is made with respect to its completeness and we assume no
liability resulting from its use. Vendor assumes no responsibility for injury to vendee or third
person proximately caused by abnormal use of the product even if reason-
able safety procedures are followed.
Furthermore, vendee assumes the risk in his use of the product.