Docstoc

Components for Control Board Dashed outlines mean component orientation is critical 3 R5 R16 R17 4 R2 R9 R14 R20 5 R4 R6 R12 R13 R15 330 Ω Resi

Document Sample
Components for Control Board Dashed outlines mean component orientation is critical 3 R5 R16 R17 4 R2 R9 R14 R20 5 R4 R6 R12 R13 R15 330 Ω Resi Powered By Docstoc
					               Components for Control Board

Dashed outlines mean component orientation is critical



3: R5, R16, R17             4: R2, R9, R14, R20        5: R4, R6, R12, R13, R15
330 Ω Resistor              1k Ohm Resistor            10k Ohm Resistor
Orange-Orange-Brown         Brown-Black-Red            Brown-Black-Orange




4: R3, R7, R11, R18         1: R8                      1: R10
100k Ohm Resistor           51k Ohm Resistor           33k Ohm Resistor
Brown-Black-Yellow          Green-Brown-Orange         Orange-Orange-Orange




1: R19                      20: D0-D3, D5-D20          2: Uc_A, Uc_B
220K Ohm Resistor           1N4148 Diode               28-Pin Dip Socket
Red-Red-Yellow              Match diode stripe with    ATMEGA_48
                            stripe on board



1: Uc_C                     1: S1                      1: 3-Pin Female Fuse
8-Pin Dip Socket            SPST Switch. Pin spacing   Socket
Attiny 25                   allows only two ways to
                            place. Either way is OK.




2: 3-Pin Male Header        IC Select                  2: LED_1, LED_2
ISP                         SPDT Slide Switch          Bi-Color
                                                       Longer lead is +, Shorter
                                                       is flat side




1: LED_3                    Q2, Q3: C5019              Q4: MPSA65
Red                         Match shape with           Match shape with
Longer lead is +, Shorter   silkscreen                 silkscreen
is flat side
                             Control Board Components (cont)
   4: C1, C2, C4, C5                 1: D4                            2: 4-pin male connector
   0.1μF Capacitor                   1N5402 Diode                     Left Motor, Right Motor
                                     Match diode stripe with          Plastic lip matches with
                                     stripe on board                  stripe on board




   1: 5V Regulator                   1: C3                            1: Audio Transducer
                                     200μF Capacitor
   Flat side against board           Long lead is +                   + on case matches + on
                                                                      board




    1: 20-Pin Male Ribbon            1: R1                            1: SPDT Relay
    Cable Connector                  1 Ω Resistor
    Single slot to center of         “U” shaped wire. Does            Only fits one way
    board                            not look like a resistor



    1: Male Connector                1: Female Connector
    Charger                          Battery
    Red wire is +                    Red wire is +



______________________________________________________________________________


    2: H Bridge                       1: Q1. TIP-127FP
    L298                              Place flat side to outside of
    Warning! Mount on Back            board. Warning! Mount
    Side of Board                     on Back Side of Board


______________________________________________________________________________


     1: Fuse                            1: μC_C : Attiny Place in      2: μC_A, : μC_B :
     Place in socket when board is      socket when board is           ATMEGA 48 Place in socket
     completed.                         completed.                     when board is completed.
     Do Not Solder                      Do Not Solder                  Do Not Solder

				
DOCUMENT INFO
Shared By:
Categories:
Tags:
Stats:
views:4
posted:11/19/2011
language:English
pages:2