ID no - DOC - DOC by w78zhBVC

VIEWS: 60 PAGES: 6

									                        APPENDIX –F:CODES & STANDARDS




    ID no. of STD             Rev/ Date          Description
British Standards Institute
                                                 Specification for PVC Insulated cables.
   BS 5308 Part 2               2005
                                                 Electric Cables-PVC-insulated, armoured
       BS 6346                  2005             cables for voltages of 600/1000V and
                                                 1900/3300 V
                                                 Specification for performance requirements
                                                 for cables required to maintain circuit integrity
       BS 6387                  2005             under fire conditions.

                                                 Common tests methods for cables under fire
                                                 conditions-tests on gases evolved during the
     BS 6425 P2                 1993             combustion of materials from cables-Part 1:
                                                 Apparatus.


International Electro -Technical Commission (IEC)
                                             Tests on electric and fiber optic cables under
                                             fire conditions
                                             Part 1-2: Test for vertical flame propagation
    IEC 60332-1-2               2004
                                             for a single insulated wire or cable-Procedure
                                             for 1 KW premixed flame

                                                 Tests on electric and fiber optic cables under
                                                 fire conditions
                                                 Part 2-2: Test for vertical flame propagation
    IEC 60332-2-2               2004
                                                 for a single small insulated wire or cable-
                                                 Procedure for diffusion flame.

                                                 Tests on electric cables under fire conditions
                                                 Part 3-10: Test for vertical flame spread of
   IEC 60332-3-10               2000             vertically mounted bunched wires or cables-
                                                 Apparatus.

                                                 Tests on electric cables under fire conditions
                                                 Part 3-21: Test for vertical flame spread of
   IEC 60332-3-21               2000             vertically mounted bunched wires or cables-
                                                 Category A/F/R.

                                                 Tests on electric cables under fire conditions
                                                 Part 3-22: Test for vertical flame spread of
   IEC 60332-3-22               2000
                                                 vertically mounted bunched wires or cables-
                                                 Category A.
                                                 Tests on electric cables under fire conditions
                                                 Part 3-23: Test for vertical flame spread of
   IEC 60332-3-23               2000             vertically mounted bunched wires or cables-
                                                 Category B.




                                          Page 1 of 6
                        APPENDIX –F:CODES & STANDARDS


    ID no. of STD             Rev/ Date          Description
                                                 Tests on electric cables under fire conditions
                                                 Part 3-24: Test for vertical flame spread of
   IEC 60332-3-24               2000             vertically mounted bunched wires or cables-
                                                 Category C.
                                                 Higher performance protocol for the standard
                                                 digital interface for programmable
     IEC 60488-1                2004
                                                 instrumentation
                                                 Part 1: General.
                                                 Standard digital interface for programmable
                                                 instrumentation
     IEC 60488-2                2004
                                                 Part 2: Codes, Formats, Protocols and
                                                 Common commands
                                                 Degrees of Protection provided by
      IEC 60529                 2007
                                                 Enclosures (IP Codes).
                                                 Industrial Platinum Resistance Thermometer
      IEC 60751                 1995
                                                 Sensors
                                                 Electromagnetic compatibility for Industrial-
      IEC 60810                 2003             process management and control equipment

                                                 Common test methods for insulating and
                                                 sheathing materials of electric cables and
                                                 optical cables
                                                 Part1-1: Methods for general application-
    IEC 60811-1-1               2001
                                                 Section 1: Measurement of thickness and
                                                 overall dimensions-tests for determining the
                                                 mechanical properties

                                                 Electromagnetic Compatibility (EMC) Part 4-
                                                 2: Testing and Measurement techniques-
    IEC 61000-4-2               2001
                                                 Electrostatic discharge immunity.

                                                 Electromagnetic Compatibility (EMC) Part 4-
                                                 3: Testing and Measurement techniques-
    IEC 61000-4-3               2008
                                                 Radiated, Radio-frequency, Electromagnetic
                                                 field immunity test.
                                                 Electromagnetic Compatibility (EMC) Part 4-
                                                 4: Testing and Measurement techniques-
    IEC 61000-4-4               2007
                                                 Electrical fast transient/burst immunity test.

                                                 Electromagnetic compatibility (EMC) Part5:
                                                 Installation and mitigation guidelines Section
  IEC TR 61000-5-2              1997
                                                 2: Earthing and Cabling.

                                               Programmable Controllers
     IEC 61131-1                2003
                                               Part 1: General Information.
                                               Guide for Selection of Electrical Equipment
        IEC 5571                  2000
                                               for Hazardous Areas
                                               Electrical Apparatus for Explosive Gas
       IEC 60079
                                               Atmospheres.
Institute of Electrical and Electronic Engineers (IEEE)
        IEEE 472                  1979         Surge Withstand Capability.
Indian Standards (IS)


                                          Page 2 of 6
                       APPENDIX –F:CODES & STANDARDS


   ID no. of STD             Rev/ Date           Description
                                                 Part 1- PVC insulated heavy duty electrical
      IS-1554                  1988
                                                 cables.
                                                 PVC insulated cables for working voltages
       IS-694                  1990
                                                 upto and including 1100 volts.
                                                 Methods for determining thermal
      IS-1271                  1985
                                                 classification of electric insulation.
                                                 Recommended current rating for Cables.
      IS-3961                Pt1 to Pt3
                                                 Conductors for insulated electric cables and
      IS-8130                  1984
                                                 flexible cords.
                                                 PVC Insulation and sheath of electric cables.
      IS-5831                  1984
                                                 Mild steel wires, formed wires & tapes for
      IS-3975                  1999
                                                 armouring of cables.
                                                 Method for testing uniformity of coating of
      IS-2633                  2006
                                                 zinc coated articles.
      IS-10810                 1984              Methods for test of Cables.
                                                 Degrees of protection provided by enclosures
      IS-2147                  2004              for low voltage switch gear and control gear.

                                                 Flame proof enclosures for electric
       IS-2148                 2004
                                                 apparatus, etc:
                                                 Recommended practice for hot dip
       IS-2629                 1985
                                                 galvanizing of Iron/steel.
                                                 Specification for Pressure and Vacuum
       IS-3624                 1998
                                                 gauges.
                                                 Colours for ready mixed paints and enamels.
        IS-5                   2007
International Organization for Standardization (ISO)
                                              Measurement of Fluid Flow by means of
                                             pressure differential devices
     ISO 5167-1                 2003         Part 1: Orifice Plates, Nozzles and Venturi
                                             Tube inserted in Circular Cross - Section
                                             Conduits running full.
                                              Measurement of Fluid Flow – Procedure for
      ISO 5168                  2005         the evaluation of uncertainties.

                                                 Measurement of Fluid Flow in Closed
                                                 Conduits-Guidance to selection, installation
     ISO 10790                 2003              and use of Coriolis meters (mass flow,
                                                 density and volume flow measurement).

                                                 Open Systems Interconnect : Basic
   ISO/IEC-7498                1994
                                                 Reference Model
  ISO/IEC-9594-1               2001              Open Systems Interconnect – Overview

Instrument Systems and Automation Society (ISA)
                                          Instrumentation Symbols and Identification.
      ISA -S5.1             1984
                                                 Binary Logic Diagrams for Process
     ISA -S5.2                 1976
                                                 Operations.



                                          Page 3 of 6
                       APPENDIX –F:CODES & STANDARDS


    ID no. of STD           Rev/ Date          Description
                                               Graphic Symbols for Distributed
                                               Control/Shared display Instrumentation, Logic
      ISA -S5.3               1983
                                               and Computer Systems.

      ISA -S5.4               1991             Instrument Loop Diagrams
                                               Graphic Symbols for Process Displays.
      ISA -S5.5               1985
                                               Annunciator Sequences and Specifications.
     ISA-S18.1                2004
                                               Specification forms for Process Measurement
      ISA-S20                 1981             and Control Instrumentation.

                                               Hardware Testing of Digital Processing
    ISA- RP55.1               1983
                                               Computer.
                                               Environment conditions for process
     ISA -S71.04              1985             measurement and control system:
                                               airborne contaminants
                                               Flow equations for sizing Control valves.
     ISA-S75.01               1995
                                               Face to Face dimensions for Flanged Control
     ISA -S75.03              1992
                                               valves.
                                               Face to Face dimensions for Flangeless
     ISA-S75.04               1995
                                               Control valves.
    ISA- RP75.06              1981             Control Valve manifold designs.

American National Standards Institute (ANSI)
                                               Metallic Gaskets for Pipe Flanges - Ring
    ANSI B16.20               2000             Joint, Spiral Wound and Jacketed.

                                               Forged fittings, socket welding and threaded.
    ANSI B16.11               2005
                                               Wrought steel butt welding Short Radius
    ANSI B16.28               1994
                                               Elbows and Returns.
                                               Valves - Flanged, Threaded and Weld End.
    ASME B16.34               2004
    ASME B16.36               2006             Orifice Flanges.
                                               Pipe flanges and flanged fittings NPS ½
    ASME B16.5                2003             through NPS 24 metric/inch standard.

                                               Pipe threads general purpose inch series.
    ANSI B1.20.1              1983
                                               Temperature Measurement Thermocouples
 ANSI / ISA MC96.1            1991
                                               Power Test Code – Temperature
ANSI /ASME PTC19.3         1974/R2004
                                               Measurement and Apparatus.
   ANSI / FCI-70.2            2006             Control valve seat leakage Standard.

American Petroleum Institute (API)
                                               P1 Sizing, Selection and installation of
     API RP520                2000             pressure relieving devices in refineries,
                                               Part 1-Sizing and Selection.



                                        Page 4 of 6
                        APPENDIX –F:CODES & STANDARDS


    ID no. of STD             Rev/ Date          Description
                                                 P2 Sizing, Selection and installation of
     API RP520                  2003             pressure relieving devices in refineries, Part
                                                 2-Installation
                                                 Pressure Relieving and Depressuring
    API STD 521                 2007
                                                 systems.
       API 526                  2002             Flanged steel Pressure Relief Valves.

       API 527                  1991             Seat tightness of Pressure Relief Valves.

     API MPMS                   2006             Manual     of     Petroleum       measurement
                                                 standards.
     API RP 551                 1993             ProcessMeasurement Instrumentation
                                                 Part I - Process Control & Instrumentation
                                                 Machinery Protection Systems
    API STD 670               2000/R2003
                                                 Valve Inspection and Testing.
       API 598                  2004
                                                 Fire test for soft seated, quarter turn valves.
       API 607            2005/5th Edition
                                                 Specification for Fire test for Valves.
      API -6FA                  1999



German Standards (DIN)
DIN-19234              1999                      Electrical Distance Sensors; DC interface for
                                                 Distance Sensor and Signal Converter.
National Fire Protection Association (NFPA)
                                                 National Fire Protection Association
      NFPA 72                   2008

Oil Industry Safety Directorate (OISD)
OISD-STD 108           1991                     Recommended Practices On Oil Storage And
                                                Handling
OISD-STD 113          2001                      Classification of Areas for Electrical
                                                Installations at Hydrocarbon Processing and
                                                Handling Facilities.
OISD-STD 144          2005                      LPG Gas Detection System

OISD-STD 152          1991                      Safety Instrumentation for Process System in
                                                Hydrocarbon Industry
OISD-STD 163          2004                      Safety of Control Room for Hydrocarbon
                                                Industry


Weight & Measure Act (W&M)
                                                Custody transfer instruments shall be verified
                                                and approved by National Weights and
  W&M Regulations
                                                Measurement as applicable. (e.g. Weighing,
                                                flow metering, tank gauging etc.)


                                          Page 5 of 6
                          APPENDIX –F:CODES & STANDARDS


International Standards & Codes
        The following are most recent issue of the applicable standards and codes issued by
        the following associations and approval bodies as part of this specification.
        a. American Petroleum Institute (API)
        b. The Instrumentation Society of America (ISA)
        c. American Gas Association (AGA)
        d. American Society of Mechanical Engineers (ASME)
        e. American National Standards Institute (ANSI)
        f.   National Association of Corrosion Engineers (NACE)
        g. British Standards (BS)
        h. International Electrotechnical Commission (IEC)
        i.   Deutsches Institut fur Normung (DIN) - (German Standard)
        j.   International Organization for Standardization (ISO)
        k. Indian Standard (IS)
        l.   Institute of Electrical and Electronics Engineers (IEEE)
        m. NFPA National Fire Protection Association (NFPA)




                                          Page 6 of 6

								
To top