APPENDIX –F:CODES & STANDARDS
ID no. of STD Rev/ Date Description
British Standards Institute
Specification for PVC Insulated cables.
BS 5308 Part 2 2005
Electric Cables-PVC-insulated, armoured
BS 6346 2005 cables for voltages of 600/1000V and
1900/3300 V
Specification for performance requirements
for cables required to maintain circuit integrity
BS 6387 2005 under fire conditions.
Common tests methods for cables under fire
conditions-tests on gases evolved during the
BS 6425 P2 1993 combustion of materials from cables-Part 1:
Apparatus.
International Electro -Technical Commission (IEC)
Tests on electric and fiber optic cables under
fire conditions
Part 1-2: Test for vertical flame propagation
IEC 60332-1-2 2004
for a single insulated wire or cable-Procedure
for 1 KW premixed flame
Tests on electric and fiber optic cables under
fire conditions
Part 2-2: Test for vertical flame propagation
IEC 60332-2-2 2004
for a single small insulated wire or cable-
Procedure for diffusion flame.
Tests on electric cables under fire conditions
Part 3-10: Test for vertical flame spread of
IEC 60332-3-10 2000 vertically mounted bunched wires or cables-
Apparatus.
Tests on electric cables under fire conditions
Part 3-21: Test for vertical flame spread of
IEC 60332-3-21 2000 vertically mounted bunched wires or cables-
Category A/F/R.
Tests on electric cables under fire conditions
Part 3-22: Test for vertical flame spread of
IEC 60332-3-22 2000
vertically mounted bunched wires or cables-
Category A.
Tests on electric cables under fire conditions
Part 3-23: Test for vertical flame spread of
IEC 60332-3-23 2000 vertically mounted bunched wires or cables-
Category B.
Page 1 of 6
APPENDIX –F:CODES & STANDARDS
ID no. of STD Rev/ Date Description
Tests on electric cables under fire conditions
Part 3-24: Test for vertical flame spread of
IEC 60332-3-24 2000 vertically mounted bunched wires or cables-
Category C.
Higher performance protocol for the standard
digital interface for programmable
IEC 60488-1 2004
instrumentation
Part 1: General.
Standard digital interface for programmable
instrumentation
IEC 60488-2 2004
Part 2: Codes, Formats, Protocols and
Common commands
Degrees of Protection provided by
IEC 60529 2007
Enclosures (IP Codes).
Industrial Platinum Resistance Thermometer
IEC 60751 1995
Sensors
Electromagnetic compatibility for Industrial-
IEC 60810 2003 process management and control equipment
Common test methods for insulating and
sheathing materials of electric cables and
optical cables
Part1-1: Methods for general application-
IEC 60811-1-1 2001
Section 1: Measurement of thickness and
overall dimensions-tests for determining the
mechanical properties
Electromagnetic Compatibility (EMC) Part 4-
2: Testing and Measurement techniques-
IEC 61000-4-2 2001
Electrostatic discharge immunity.
Electromagnetic Compatibility (EMC) Part 4-
3: Testing and Measurement techniques-
IEC 61000-4-3 2008
Radiated, Radio-frequency, Electromagnetic
field immunity test.
Electromagnetic Compatibility (EMC) Part 4-
4: Testing and Measurement techniques-
IEC 61000-4-4 2007
Electrical fast transient/burst immunity test.
Electromagnetic compatibility (EMC) Part5:
Installation and mitigation guidelines Section
IEC TR 61000-5-2 1997
2: Earthing and Cabling.
Programmable Controllers
IEC 61131-1 2003
Part 1: General Information.
Guide for Selection of Electrical Equipment
IEC 5571 2000
for Hazardous Areas
Electrical Apparatus for Explosive Gas
IEC 60079
Atmospheres.
Institute of Electrical and Electronic Engineers (IEEE)
IEEE 472 1979 Surge Withstand Capability.
Indian Standards (IS)
Page 2 of 6
APPENDIX –F:CODES & STANDARDS
ID no. of STD Rev/ Date Description
Part 1- PVC insulated heavy duty electrical
IS-1554 1988
cables.
PVC insulated cables for working voltages
IS-694 1990
upto and including 1100 volts.
Methods for determining thermal
IS-1271 1985
classification of electric insulation.
Recommended current rating for Cables.
IS-3961 Pt1 to Pt3
Conductors for insulated electric cables and
IS-8130 1984
flexible cords.
PVC Insulation and sheath of electric cables.
IS-5831 1984
Mild steel wires, formed wires & tapes for
IS-3975 1999
armouring of cables.
Method for testing uniformity of coating of
IS-2633 2006
zinc coated articles.
IS-10810 1984 Methods for test of Cables.
Degrees of protection provided by enclosures
IS-2147 2004 for low voltage switch gear and control gear.
Flame proof enclosures for electric
IS-2148 2004
apparatus, etc:
Recommended practice for hot dip
IS-2629 1985
galvanizing of Iron/steel.
Specification for Pressure and Vacuum
IS-3624 1998
gauges.
Colours for ready mixed paints and enamels.
IS-5 2007
International Organization for Standardization (ISO)
Measurement of Fluid Flow by means of
pressure differential devices
ISO 5167-1 2003 Part 1: Orifice Plates, Nozzles and Venturi
Tube inserted in Circular Cross - Section
Conduits running full.
Measurement of Fluid Flow – Procedure for
ISO 5168 2005 the evaluation of uncertainties.
Measurement of Fluid Flow in Closed
Conduits-Guidance to selection, installation
ISO 10790 2003 and use of Coriolis meters (mass flow,
density and volume flow measurement).
Open Systems Interconnect : Basic
ISO/IEC-7498 1994
Reference Model
ISO/IEC-9594-1 2001 Open Systems Interconnect – Overview
Instrument Systems and Automation Society (ISA)
Instrumentation Symbols and Identification.
ISA -S5.1 1984
Binary Logic Diagrams for Process
ISA -S5.2 1976
Operations.
Page 3 of 6
APPENDIX –F:CODES & STANDARDS
ID no. of STD Rev/ Date Description
Graphic Symbols for Distributed
Control/Shared display Instrumentation, Logic
ISA -S5.3 1983
and Computer Systems.
ISA -S5.4 1991 Instrument Loop Diagrams
Graphic Symbols for Process Displays.
ISA -S5.5 1985
Annunciator Sequences and Specifications.
ISA-S18.1 2004
Specification forms for Process Measurement
ISA-S20 1981 and Control Instrumentation.
Hardware Testing of Digital Processing
ISA- RP55.1 1983
Computer.
Environment conditions for process
ISA -S71.04 1985 measurement and control system:
airborne contaminants
Flow equations for sizing Control valves.
ISA-S75.01 1995
Face to Face dimensions for Flanged Control
ISA -S75.03 1992
valves.
Face to Face dimensions for Flangeless
ISA-S75.04 1995
Control valves.
ISA- RP75.06 1981 Control Valve manifold designs.
American National Standards Institute (ANSI)
Metallic Gaskets for Pipe Flanges - Ring
ANSI B16.20 2000 Joint, Spiral Wound and Jacketed.
Forged fittings, socket welding and threaded.
ANSI B16.11 2005
Wrought steel butt welding Short Radius
ANSI B16.28 1994
Elbows and Returns.
Valves - Flanged, Threaded and Weld End.
ASME B16.34 2004
ASME B16.36 2006 Orifice Flanges.
Pipe flanges and flanged fittings NPS ½
ASME B16.5 2003 through NPS 24 metric/inch standard.
Pipe threads general purpose inch series.
ANSI B1.20.1 1983
Temperature Measurement Thermocouples
ANSI / ISA MC96.1 1991
Power Test Code – Temperature
ANSI /ASME PTC19.3 1974/R2004
Measurement and Apparatus.
ANSI / FCI-70.2 2006 Control valve seat leakage Standard.
American Petroleum Institute (API)
P1 Sizing, Selection and installation of
API RP520 2000 pressure relieving devices in refineries,
Part 1-Sizing and Selection.
Page 4 of 6
APPENDIX –F:CODES & STANDARDS
ID no. of STD Rev/ Date Description
P2 Sizing, Selection and installation of
API RP520 2003 pressure relieving devices in refineries, Part
2-Installation
Pressure Relieving and Depressuring
API STD 521 2007
systems.
API 526 2002 Flanged steel Pressure Relief Valves.
API 527 1991 Seat tightness of Pressure Relief Valves.
API MPMS 2006 Manual of Petroleum measurement
standards.
API RP 551 1993 ProcessMeasurement Instrumentation
Part I - Process Control & Instrumentation
Machinery Protection Systems
API STD 670 2000/R2003
Valve Inspection and Testing.
API 598 2004
Fire test for soft seated, quarter turn valves.
API 607 2005/5th Edition
Specification for Fire test for Valves.
API -6FA 1999
German Standards (DIN)
DIN-19234 1999 Electrical Distance Sensors; DC interface for
Distance Sensor and Signal Converter.
National Fire Protection Association (NFPA)
National Fire Protection Association
NFPA 72 2008
Oil Industry Safety Directorate (OISD)
OISD-STD 108 1991 Recommended Practices On Oil Storage And
Handling
OISD-STD 113 2001 Classification of Areas for Electrical
Installations at Hydrocarbon Processing and
Handling Facilities.
OISD-STD 144 2005 LPG Gas Detection System
OISD-STD 152 1991 Safety Instrumentation for Process System in
Hydrocarbon Industry
OISD-STD 163 2004 Safety of Control Room for Hydrocarbon
Industry
Weight & Measure Act (W&M)
Custody transfer instruments shall be verified
and approved by National Weights and
W&M Regulations
Measurement as applicable. (e.g. Weighing,
flow metering, tank gauging etc.)
Page 5 of 6
APPENDIX –F:CODES & STANDARDS
International Standards & Codes
The following are most recent issue of the applicable standards and codes issued by
the following associations and approval bodies as part of this specification.
a. American Petroleum Institute (API)
b. The Instrumentation Society of America (ISA)
c. American Gas Association (AGA)
d. American Society of Mechanical Engineers (ASME)
e. American National Standards Institute (ANSI)
f. National Association of Corrosion Engineers (NACE)
g. British Standards (BS)
h. International Electrotechnical Commission (IEC)
i. Deutsches Institut fur Normung (DIN) - (German Standard)
j. International Organization for Standardization (ISO)
k. Indian Standard (IS)
l. Institute of Electrical and Electronics Engineers (IEEE)
m. NFPA National Fire Protection Association (NFPA)
Page 6 of 6