03
Niko Mysterious
architect bert van geet
Niko Mysterious
The invisible switch by Niko
niko Mysterious is an extraordinary new concept. all functions are completely flush mounted and are very discreetly presented.
once it’s flush mounted and painted over, this range has a unique design value. the 24V push button and wave control are always
illuminated: the ring around the switch glows a warm white in the dark.
• the functions are always installed in the flush mounting system for brickwork or
in the flush mounting system for drywall panels.
• all functions are separately mounted with a minimum centre distance of 120mm.
03
• the 24V push button and wave control are always illuminated: the ring around the switch glows a
warm white in the dark.
In thIs range, the followIng functIons are aVaIlable:
• 2 x simple coax connection eDu tV + fM
• 2 x simple coax connection + satellite
• 2 x rJ connection for niko outlets
• a blank plate
• orientation lighting with blue or white leDs
• 24V push button
• wave control new!
This innovative control is activated remotely with a wave. When motion is detected within a distance of
50cm, the edge of the switch lights up. By waving within a distance of 10cm, the lighting switches on.
More info at www.nikomysterious.eu
Flush mounting system for drywall panels
Flush mounting system for brick walls
Flush mounting system for MDF
Curious for more? Check out the installation film at www.nikomysterious.eu
03-2 FLUSH MOUNTING SYSTEMS
Flush mounting system for brickwork
A flush mounting system for brickwork consists of:
- a blue insulation box with 2 inputs M20/M16
- 2 cardboard plaster moulds
- 1 fixing ring
- 1 flush mounting boxes (depth 50mm)
- 2 protective cardboards masks for finishing
Complete flush mounting system
Flush mounting system for brickwork 199-00096 Pack: 1
Flush mounting system for dry wall panels
A flush mounting system for dry wall panels consists of:
- 1 fixing ring
- 1 flush mounting box (depth 50mm)
- 2 protective cardboards for finishing
For installation, use the holesaw (199-00099).
The fixing ring has to be fixed with 2-component chemical anchor (polyester). For more information, see www.niko.be or www.nikomysterious.eu.
Complete flush mounting system
Flush mounting system for drywall panels 199-00097 Pack: 1
Accessories for the flush mounting system for dry wall panels
Holesaw with a double saw blade to be used for flush mounting systems for dry wall panels. The first saw blade has a diameter of 80mm, the second saw blade has a
saw blade of 89mm and makes a 5mm deep collar.
Accessories
Holesaw for drywall panels 199-00099 Pack: 1
Niko Mysterious - 03-2
FUNCTIONS 03-3
Push button 24V (simple, double or 4-fold push button)
Always to be used in combination with a flush mounting system for brickwork or the flush mounting system for dry wall panels.
Supplied with 3 finishing plates (simple, double and 4-fold finishing plate), 3 overvoltage bridges and 2 protective cardboard masks for finishing.
Complete unit
With screw terminals and screw fixing 199-00199 Pack: 1
Accessories
Flush mounting system for brickwork 199-00096 Pack: 1
Flush mounting system for drywall panels 199-00097 Pack: 1
Holesaw for drywall panels 199-00099 Pack: 1
Simple wave control 24V
Touchless control for switching 1 lighting circuit.
Can be used in combination with the flush-mounting system for brickwork or the flush-mounting system for gypsum board walls.
Includes 2 central plates.
Complete unit
With screw terminals and screw fixing 199-00200 Pack: 1
Accessories
Flush mounting system for brickwork 199-00096 Pack: 1
Flush mounting system for drywall panels 199-00097 Pack: 1
Holesaw for drywall panels 199-00099 Pack: 1
2 x simple coax connection EDU TV + FM
Always to be used in combination with the flush mounting system for brickwork or the flush mounting system for dry wall panels.
Is supplied with 2 protective cardboard masks for finishing.
• DIN 45325, IEC 60169-2
• connection attenuation: TV 1 00m
>3
VE
>1
20
mm WA
m
20m
>1
>120mm
>120mm
>120m
>120
VE
12
WA
VE
WA
Niko Mysterious - 03-6
TechnicAL informATion 03-7
mysterious 199-00199
- The 1-, 2- or 4-fold bus push button (24V) serves to control remote switches (teleruptors), dimmers and home automation systems.
For controlling a Nikobus home automation system, the interface for push buttons (05-056 or 05-058) can be used!
- Controlling dimmers: only connect dimmers that are separately derived: 05-711 / 05-715 / 65-410 / 65-412 / 65-416.
- Only for mounting in a flush mounting system for brickwork (199-00096) or for gyproc walls (199-00097).
technical specifications:
If you work with a remote switch, connect the push button module to 24V~ via a short circuit proof safety transformer.
max. 1 white leD that
use of 24V for push button signaling cable
switching capacity permanently lights the ring
remote switch 24V~ via short circuit proof
max. 25VA 8/10/12/14/16/20
(AC current) safety transformer
min. 0,5mm - max. 0,8mm
other systems F=+/-
0 - 24V DC 1A
(DC current) E=+/-
Current consumption of the LED = 100mW
24V push button with leD = 4-fold
for screwing finishings wiring diagram
B
+
C A
Possible finishings D
or or
Note in case of a simple connection:
If the light circuit has to be switched on no matter which key is pressed, you have to bridge connection terminals A, B, C and D by means of the supplied clamps.
mouNtiNG DismANtliNG
Niko Mysterious - 03-7
03-8 TechnicAL informATion
mysterious 199-00200
- The single Niko Mysterious wave control (24V) controls remote switches (teleruptors) and home automation systems.
For controlling a Nikobus home automation system, the interface for push buttons (05-056 or 05-058) can be used.
- If someone or something comes within 50cm in a straight line of the Niko Mysterious wave control, the control recognises this and the orientation lighting on the switch burns brighter. The operation
itself occurs at a distance of maximum 10cm.
- Only for mounting in a flush mounting system for brickwork (199-00096) or for gyproc walls (199-00097).
technical specifications:
If you are working with a remote switch, then connect the control to 24V AC via a short-circuit resistant safety transformer.
use of 24V for wave control max. switching capacity signaling cable
remote switch 24V~ via short circuit proof
max. 25VA
(AC current) safety transformer 8/10/12/14/16/20
other systems min. 0,5mm - max. 0,8mm
0 - 24V DC 1A
(DC current
Current consumption of the control = 0,25W
Infra-red radiation. Do not view directly with optical instruments.
24V Niko mysterious wave control with leD
for screwing finishings wiring diagram
24V
24V 24V
25VA
µ
199-00200
N
L
mouNtiNG DismANtliNG
Niko Mysterious - 03-8
TechnicAL informATion 03-9
mysterious 199-00199 mysterious 199-00200
Controlling 1 light circuit from 2 places
N N
L L
24V 24V 24V 24V
25VA 25VA
µ µ
199-00200 199-00200
Controlling 4 light circuits from 1 place
N
L
Niko Mysterious - 03-9
03-10 TechnicAL informATion
mysterious 199-00199 mysterious 199-00200
Controlling several light circuits from 2 places
N N
L L
24V 24V 24V 24V
25VA 25VA
µ µ
199-00200 199-00200
Controlling 4 light circuits, 1 of which can be dimmed, from 1 place
N L
only connect dimmers
that are separately powered!
Niko Mysterious - 03-10
TechnicAL informATion 03-11
mysterious 199-00199 mysterious 199-00200
Nikobus via the interface for push buttons
with 05-056
Nikobus L N Nikobus
L
N
24V 24V
25VA
µ
199-00200
or with 05-058
Nikobus L N
Niko Mysterious - 03-11